Used Band Saw Blade Sharpening Machine for sale (92,848)

Condition: new, Year of construction: 2025, S275 Metal Cutting Machine Motor Type - 3-phase induction motor Electrical connection - 400V 50/60Hz Power supply: 400V (three-phase) Protection - IP54 Power - 1.5 HP 1.1 kW Rated current - 400V - 3.6 Amp Speed ​​(RPM) - 50Hz - 2840/1420 Gearbox Transmission ratio - 50Hz - 1:30 Band saw Saw blade dimensions - 2480x27x0.9x6-10mm Chjdpfxoxdbzbe Adxjd Blade guide wheel diameter - 293mm Saw blade speed - 50Hz - 45/90mm (m/min) Cooling System Pump Type – 230V 100W Pump Rated Current – ​​0.3 (Amp) Speed ​​– 50Hz-2840 (rpm) Tank Capacity – 10 liters Mechanical Data Dimensions with base – 1560x990x1665 (mm) Dimensions without base – 1320x510x755 (mm) Shipping Dimensions – 1380x570x890 (mm) Weight – Net – 185 (kg) | Gross – 200 (kg) Noise Level – 70 (dB) Fuse – max. 16 (Amps) Ambient Temperature – 5-35 (°C) Ambient Humidity – 25-80% General: Cutting Angle Adjustment: Via Swivel Arm Saw Blade Guides: Ball Bearing Guide Rollers Saw Arm Lift: Manual Feed: Continuously Adjustable Saw Blade Tension: Manually via Handwheel Band Guides with Bearings and Carbide Tiles Height from Floor to Vice: 910 mm

Year of construction: 1900, condition: good (used), Thickness of sanding paper 1,3 mm Width of sanding paper 41 mm Length of sanding paper 6280 mm Sharpening pitch 6 mm a total of 19 units in stock Cjdpot H Sm Tofx Adxshd

Condition: new, Year of construction: 2025, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Chodpfx Adoudi Unsxed Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: new, Year of construction: 2025, saw blade diameter: 600 mm, grinding wheel diameter: 30 mm, compressed air connection: 5 bar, New saw blade grinding machine - chip breaker groove grinding machine, Grinding range approx. 120-600 mm diameter Maximum saw blade tooth pitch approx. 22 mm Control: Siemens PLC with automatic limit stop after the grinding process Grinding spindle: High-frequency spindle, 24000 1/min. Cooling: Minimum quantity lubrication Saw blade clamping: pneumatic Gearbox: running in oil bath Saw blade thickness adjustment: via backlash-free preloaded ball screw drive Grinding stroke: via heavy-duty linear roller guide Cedpeqpdi Refx Adxshd Accessories: - 1 set of reduction rings 16x22,25,32,40,50 mm - Circuit diagrams - Grinding wheel 30x0.3x6 mm, CBN Operating voltage: 400V, 50 Hz Compressed air connection: necessary

Condition: used, metal band saw blade, band saw blade, metal saw band -Manufacturer: Eyltool, metal band saw M42 unused -Type: M42 2060x20x0.9 ZpZ 8/12 -Number: 10x metal saw band available -Price per piece -Transport dimension: Ø 230 / 40 mm -Weight: 0.3kg/pcs Chedpfx Adsikbruoxod

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, saw band length: 5,780 mm, saw band width: 41 mm, cutting range round steel at 45°: 450 mm, cutting range round steel at 90°: 450 mm, input voltage: 400 V, cutting range square steel at 90°: 450 mm, cutting range square steel at 45°: 420 mm, Semi-automatic sawing machine with 1-sided miter. (Also available with 2-sided miter.) Chsdpjvy Swiofx Adxsd Hydraulically operated material clamp. Hydraulically operated saw frame. Brand: KMS Type: KMY DG 450 Saw motor: 3 kW Height of support table: 888 mm Max / Min clamp opening: 0 / 740 mm Clamp height: 240 mm Mitre: 1 side Down speed: Continuously adjustable Cutting speed: Continuously adjustable, 20 - 90 m/min Band dimensions: 5780 x 41 x 1.3 mm Weight: ± 1600 kg Capacity: 90° (right angle): Round: Ø 450 mm Square: 450 x 450 mm Rectangle: 450 x 680 mm 60°: Round: Ø 450 mm Square: 450 x 450 mm Rectangle: 450 x 570 mm 45°: Round: Ø 450 mm Square: 420 x 420 mm Rectangle: 350 x 480 mm 30°: Round: Ø 350 mm Square: 330 x 330 mm Rectangle: 240 x 450 mm Incl. 2 short roller tracks. (not shown)

Condition: new, Year of construction: 2025, machine/vehicle number: MR005920, Band saw from the Aura series by Casadei. These machines are equipped with cast iron wheels and sturdy construction. The wheels have a diameter of 560 mm. Price is ready to use, af hine is equipped with the following options: - Bottom guide with bronze guide elements Technical specifications: - Diameter saw wheels: 560 mm - Length saw band: 4,450 mm - Maximum cutting height: 370 mm - Maximum cutting width: 550 mm - Table length: 700 mm Chodpfxowd Icno Adxsd - Table width: 930 mm - Motor power: 3.5 hp - Serial number: SOC 01/25

Condition: new, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 Chjdpfx Adovuf S Nsxod 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.

Condition: used, Metal band saw blade, band saw blade -unused original packaging Cedpfxob A S Tvs Adxjhd -Number: 7x sheets available -Price: per piece -Toothing: 4/6 K-POS -Dimensions: 2835/27/H0.9 mm -Weight: 0.6 kg/piece

Condition: excellent (used), Metal band saw blade, band saw blade, metal saw band -Manufacturer: Holex, Bi-metal saw band unused -Type: 173605 5/8 -Length: 2710 mm -Number: 7 sheets available Csdpfx Ajwbr Ddedxshd -Price: per piece -Transport dimensions: Ø 300 x 40 mm -Weight: 0.5 kg/piece

Condition: used, Metal band saw blade, band saw blade, metal saw band -Metal band saw blade: saw band unused -Type: 4125 x 26 x 1.5mm -Quantity: 3x sheets available -Price per piece -Transport dimensions: Ø 450 / 40 mm Csdpfxsquftlo Adxohd -Weight: 0.8 kg/piece

Condition: excellent (used), Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, Bi-metal saw band M42 VPE with 10 pieces unused Ovp -Type: Biflex Kobali M42 3660 x 25 x 0.90 mm Cedpfx Adsvu S Tmoxehd -Quantity: 2x box available -Price/Distribution: per box -Transport dimensions: 790/600/H35 mm -Weight: 8.2 kg/piece

Condition: used, Metal band saw blade, band saw blade, metal saw band Chjdpfx Adsqufr Ioxod -Manufacturer: Wikus, bi-metal saw band M42 unused -Type: Biflex Kobali M42 3660 x 25 x 1.5 mm -Quantity: 5x sheets available -Price per piece -Transport dimensions: Ø 410 / 50 mm -Weight: 0.7kg/piece

Condition: used, Saw blade grinding machine, tool grinding machine, grinding machine, automatic sharpening machine for circular saw blades -Saw blade sharpening machine with partial gear Codpfermt Sgox Adxohd -For grinding circular saw blades up to: Ø 200 mm -Automatic delivery and power off -Dimensions 900/830/H1490 mm -Weight: 498kg

Condition: used, Metal band saw blade, band saw blade, metal saw band Chsdpfx Aequfthodxsd -Manufacturer: Wikus, 10 pieces of bi-metal saw band M42 unused -Type: Biflex Kobali M42 3700 x 25 x 1 mm -Quantity: 10x sheets available -Price: complete -Transport dimensions: 800/700/H30 mm -Weight: 8.2 kg

Condition: used, Metal band saw blade, band saw blade, metal saw band -Quality: unused, original packaging Chedpfx Ajfvkm Nedxod -Toothing: 3/4 K-POS -Price: per piece -Number: 6x sheets available -Dimensions: 3830x27x0.9 mm -Weight: 0.8 kg/piece

Condition: used, Metal band saw blade, band saw blade, metal saw band Chedpjgrvd Rsfx Adxjd -Manufacturer: Wespa Bitec Plus metal saw band unused -Dimension: 4250x34x1.10 mm 4/6 -Number: 5x sheets available -Price: per piece -Weight: 1.3 kg/piece

Condition: used, Metal band saw blade, band saw blade -unused original packaging Cjdpfx Aob A Hh Eedxshd -Number: 4x sheets available -Price: per piece -Toothing: 4 ZpZ -Dimensions: 5990 x 34 x 1.1 mm

Condition: used, Metal band saw blade, band saw blade, metal saw band -unused in: original packaging Ceded Ttrzspfx Adxjhd -Dimensions: 2625 x 20 x 0.9 mm -Toothing: 6/10 ZpZ W -Price: per piece -Number: 7 pieces -Weight: 0.4 kg/piece

Condition: used, Metal band saw blade, band saw blade -unused original packaging -Number: 5x sheets available -Price: per piece -Toothing: 5/8 ZpZ W -Dimensions: 2950 x 27 x 0.9 mm -Weight: 0.6 kg Cjdeb A H Elspfx Adxjhd

Condition: used, Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wespa, metal saw band Bitec M42 Plus unused -Dimension: 2450x27x0.90 mm 4/6 -Number: 7x sheets available -Price: per piece Csdpfxegrvfks Adxohd -Weight: 0.5 kg/piece

Condition: used, Metal band saw blade, band saw blade -unused: original packaging -Number: 6x sheets available -Price: per piece Chsdob A Inwjpfx Adxjd -Toothing: 4/6 -Dimensions: 4400 x 34 x 1.1 mm

Condition: used, Metal band saw blade, band saw blade Csdpfxecud I Nj Adxjhd -Condition: unused in original packaging -Number: 5x sheets available -Price: per piece -Toothing: 4/6 -Dimensions: 2085 x 20 x 0.9 mm

Condition: used, Metal band saw blade, band saw blade, metal saw band -Condition: unused -Price: per piece -Number: 5x sheets available Chjdped Ngp Isfx Adxod -Toothing: 5-8 -Dimensions: 4500 x 34 x 1.10 mm -Weight: 1.3 kg/piece

Condition: used, Metal band saw blade, band saw blade Chodpfsb A S Dcsx Adxod -unused -Number: 7x sheets available -Price: per piece -Toothing: 6/8 -Dimensions: 4570 x 41 x 1.7 mm