Used Ballistic Separator for sale (6,750)

Condition: new, functionality: fully functional, SALVATORE ROBUSCHI RCC 32-20C cantilever pump – 5.5 kW – 15 m³/h Industrial vertical cantilever pump by Salvatore Robuschi, equipped with a vortex impeller and FELM IE3 three-phase motor. Assembly includes a long immersion column, separate discharge pipe, mounting plate and guarded coupling. Designed for installation above a tank or sump. The cantilever construction requires no submerged shaft bearings or bushes. Suitable for various industrial liquids and solids-laden liquids, subject to material compatibility and operating conditions. Type: RCC 32-20C Serial number: 2010042272 Nameplate date: 06/2022 Nameplate duty point: 15 m³/h at 12.3 m head Motor: FELM FA3-132S-4, 5.5 kW Supply: 400 V delta / 690 V star, three-phase, 50 Hz Rated current: 10.9 / 6.3 A Speed: 1,450 rpm Efficiency class: IE3 Ksdpe Aa Dbyjfx Akpedu Protection: IP55; insulation class F Pump casing in corrosion-resistant cast stainless steel CF8M (EN 1.4408, cast equivalent of AISI 316)

Condition: used, Year of construction: 2016, functionality: fully functional, BAC VXC S455 evaporative condenser, R134a Used 5 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Kdodpfxezz Side Akpeu Design temperature: −20 / +120 °C Fan overall efficiency (nameplate): 59.05% Marking: CE BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, This is a combination steamer SCC 201 WE electric, manufactured in 2017, from the premium manufacturer Rational. The unit has been fully refurbished in our in-house workshop and is in perfect working order. Please note that these are example images; original images will follow shortly. The recommended retail price (RRP) is €21,940.00 (net) / €26,108.60 (gross). Our price offer is: €8,987.39 (net) / €10,695 (gross). The unit is available from week 44. You will receive an invoice with VAT shown. Service: We will be happy to assist you in arranging a certified Rational service technician. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. This combination steamer offers space for 20 x 1/1 GN containers. In automatic mode, the unit automatically recognizes the ideal cooking process, the size of the food, the quantity to be cooked, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods and finishing). Technical data: W x D x H: approx. 879 x 791 x 1782 mm Minimum door opening dimensions for transport WxH: 925x1900mm Power connection: V: 400 / kW: 37.0 / Hz: 50/60 Weight: approx. 268 kg Serial number: E21SI17072605430 Year of manufacture: 2017 Capacity: 20 x 1/1 GN or 40 x 1/2 GN Longitudinal insertion: 1/1, 1/2, 2/3, 1/3, 2/8 GN Meals per day: 150-300 Condition: Used, refurbished, fully functional. Further information: Kjdpfx As Aa Ntbokpedu In combination steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C) and combination (30°C to 300°C). Care Control - self-cleaning system Core temperature probe Handheld spray gun with automatic retraction 8.5 inch color display and touchscreen 5 fan speeds programmable integrated, maintenance-free grease separation system Automatic start time preselection 7 cleaning levels for unattended cleaning - also overnight Moistening adjustable in 3 levels - from 30°C to 260°C programmable proving stages USB interface Joint-free, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions.

Condition: used, This listing is for the Hereaus Sepatech Biofuge 15R Refrigerated Centrifuge The Heraeus Sepatech Biofuge 15R is a benchtop high-speed refrigerated laboratory centrifuge designed for centrifugation tasks in research, clinical diagnostics, molecular biology, and biotechnology settings. It combines rapid spinning performance with active cooling to preserve temperature-sensitive samples during separation processes Kdjdpfx Aksxzidlepsu

Condition: used, This listing is for a Thermo Fisher Scientific Sorvall RC6+ Centrifuge The unit is in full working condition and is ready for immediate release. The Sorvall RC 6 Plus is a high-speed, refrigerated floor-standing centrifuge designed for large-volume separations in research, bioprocessing or production labs. According to the manufacturer, it: Is capable of speeds up to 22,000 rpm (which corresponds to about 55,200 ×g) without needing a vacuum system. Handles up to 4 × 1,000 mL bottles in a single run (i.e., ~4 L total) in its standard configuration. Uses a brushless high-frequency motor drive, and has full refrigeration for temperature control. Offers a broad rotor compatibility platform (including composite, aluminium, continuous flow etc) for different In short: this is a heavy-duty centrifuge for larger volumes and higher speeds, suited to labs that need more capacity and performance than benchtop or mid-range units. Key Features & Highlights Here are some of the standout features: Speed & G-force: Up to 22,000 rpm, approx. 55,200 ×g. Capacity: 4 bottles of 1,000 mL (4 L total) in typical configuration. Temperature control: Ability to set in range from -20 °C to +40 °C (in 1 °C increments), and maintain temperature accuracy of ±2 °C. Motor/drive: Brushless high-frequency motor = faster spin up/downs, lower maintenance than older belt drives. Programmability & control: Up to 30 stored programs, with features like real-time control (delayed start/stop), ω² dt (integrator) for reproducibility, pre-cool function, and both rpm and RCF display. Kdedpfx Aexukkyskpeu Safety & interlocks: Automatic lid-lock when running, door cannot be opened while rotor is spinning, and run terminates automatically in the event of certain malfunctions. Rotor flexibility: Supports a wide selection of rotors (fixed-angle, swinging bottle/bucket, continuous flow), including composite carbon-fibre rotors for higher performance / durability

Condition: used, This listing is for a Grifols DG-224 Blood Typing Solution. Kdsdpfx Aoxxx Izekpeu The unit is in full working condition and is ready for immediate release. The Grifols DG-224 is a sophisticated diagnostic instrument designed for use in clinical laboratories, particularly in blood typing and antibody investigations. It is an integral part of the DG Gel system, which employs column agglutination technology (CAT) to deliver precise and reliable testing results. Below are detailed insights into the features and specifications of the DG-224. Key Features: Manual Testing System: The DG-224 delivers efficient testing procedures, making it suitable for both patient and donor testing while maintaining a comprehensive assay menu. Compatibility with DG Gel Cards: This instrument works exclusively with DG Gel cards, which utilize 8-column gel technology to facilitate accurate blood group typing and detection of unexpected antibodies. Load Capacity: The DG-224 is designed to accommodate up to 24 DG Gel cards, allowing for high-throughput testing in busy laboratory environments. Removable and Interchangeable DG Spin Head: The device features a unique spin head that can be easily removed and replaced, ensuring ease of maintenance and versatility. Pre-Programmed Centrifugation Conditions: The DG-224 includes pre-set centrifugation parameters specifically optimized for use with DG Gel cards. Centrifugation Speed: The instrument operates at a centrifugation speed of 990 rpm ±10 rpm, ensuring effective separation and analysis. Digital Display and Alarm System: The DG-224 is equipped with a digital display for easy monitoring of the testing process. It also features an alarm system to signal any operational issues. Safety Features: Built-in safety systems include out-of-balance control to prevent misuse in case of improper loading and detection mechanisms for door opening during operation, enhancing user safety. Technical Specifications: Voltage: 100-240V, allowing for use in a variety of international settings. Frequency: 50-60 Hz, compatible with global power specifications. Maximum Input Power Consumption: 50 W, indicating low energy consumption. Fuses: Requires 2 x T 2A L 250 V fuses.

Condition: used, This listing is for a Thermo Scientific FiberLite F21-8x50y Centrifuge Rotor. The unit is in full working condition and is ready for immediate release. The Thermo Scientific FiberLite F21-8x50y Centrifuge Rotor is a versatile and high-performance laboratory tool suitable for a wide range of applications. Here’s an organized overview of its key features, specifications, and applications: Key Features and Specifications Design and Capacity: Holds up to 8 tubes Capacity of 50 mL per tube Kdodpfoxx Appex Akpeu Material: Constructed from lightweight, corrosion-resistant materials such as carbon fibre and aluminium Configuration: Fixed-angle design, with tubes positioned at a constant angle relative to the axis of rotation Compatibility: Works with various Thermo Scientific centrifuges, including: Heraeus Megafuge series Sorvall Legend series Safety Features: Automatic rotor recognition system Lid-locking mechanism to prevent accidental opening during operation Performance: Maximum speed: 21,000 rpm Maximum RCF: 52,400 x g Weight: Net weight of the rotor: 9.9 lb (4.49 kg) Biocontainment: Features a bioseal lid to ensure samples remain contained and to protect users from hazardous chemicals Environmental Considerations: Energy-efficient design with reduced waste production Key Applications The FiberLite F21-8x50y Centrifuge Rotor is ideal for various laboratory procedures, including: Subcellular Separations: Isolating cellular components for research and analysis. Bacteria Pelleting: Concentrating bacterial cultures for further experiments. Lysate Clarification: Removing debris from cell lysates to obtain clear samples. Cell Membrane Studies: Analyzing the properties and functions of cell membranes. Sucrose Gradient Isolation: Mitochondria Endoplasmic reticulum Gradient separation of cells using solutions like Percoll, Ficoll, Optiprep, or Nycodenz This rotor combines advanced technology with practical safety and efficiency features, making it suitable for a variety of applications in research, clinical, and industrial laboratories.

Condition: used, This listing is for 1 of 2 MSE Micro Centaur Centrifuge. The unit is in full working condition and is ready for immediate release. The Micro Centaur is a bench top machine designed specifically for centrifuging small capacity tubes. Its small size and light weight make it ideal for transporting by hand, and using in laboratories where space is at a premium. The Micro Centaur is ideal for hospital and research laboratories, and for applications such as amino acid analyses, enzymatic, biochemical and immune assays, and for the separation of physiological fluids. Technical specifications: Kdjdpfsxx Arqox Akpju Voltage: 220-240 V Power: 250 W Centrifuge speed: 6,500 rpm or 13,000 rpm Timer: up to 8 minutes Rotor: fixed angle with 12 x 1.5 / 2.0 ml Outer dimensions (W) x (D) x (H): 200 x200 x 190 mm

Condition: used, This listing is for Pharmacia Biotech BPG 140/500 Chromatography Column The unit is in full working condition and ready for immediate use The BPG 140/500 is a robust preparative chromatography column designed for laboratory and bioprocess purification applications. The 140 mm diameter and 500 mm column dimensions provide a substantial separation bed, with an approximate geometric volume of 7.7 litres. Suitable for protein and biomolecule purification using a range of chromatography media. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Kodpfszqf Dtox Akpedu Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, This listing is for Cytiva Axichrom 70/500 Chromatography Column Ksdpfx Aszqf Ewskpjdu The unit is in full working condition and ready for immediate use This low-pressure chromatography column features an automated packing design, ensuring optimal bed stability and reproducible purification runs for pilot and production-scale bioprocessing workflows. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory For more chromatography columns please click here ?q=chromatography Popular Uses include – purification of drugs, antibodies, proteins and other active ingredients. – purification of proteins, enzymes, antibodies, vaccines and other biologics. – research into proteins, DNA, metabolites, pharmaceuticals and chemical compounds. – separation and purification of chemical substances and intermediates. – analysis of sugars, flavours, additives, contaminants and other components. – testing water, soil and air samples for pollutants and contaminants. – analysis of drugs, metabolites, hormones and other biological compounds. – analysis and separation of hydrocarbons and petroleum products. – analytical and purification services for pharmaceutical and biotechnology companies. – downstream processing and purification of fermentation products

Condition: used, This listing is for Cytiva Axichrom 200/300 chromatography column The unit is in full working condition and ready for immediate use The Cytiva Axichrom 200/300 is a large-scale chromatography column designed for bioprocess purification applications. It provides controlled packing and efficient separation for purification processes, making it suitable for laboratories, research facilities and industrial bioprocessing environments For all available chromatography columns please click ?q=Chromatography+Column Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Popular Uses include Ksdpfx Aezqf Hbekpodu – purification of drugs, antibodies, proteins and other active ingredients. – purification of proteins, enzymes, antibodies, vaccines and other biologics. – research into proteins, DNA, metabolites, pharmaceuticals and chemical compounds. – separation and purification of chemical substances and intermediates. – analysis of sugars, flavours, additives, contaminants and other components. – testing water, soil and air samples for pollutants and contaminants. – analysis of drugs, metabolites, hormones and other biological compounds. – analysis and separation of hydrocarbons and petroleum products. – analytical and purification services for pharmaceutical and biotechnology companies. – downstream processing and purification of fermentation products.

Condition: used, This listing is for MSE Sanyo MSB010. CX2. 5 Microcentrifuge The unit is in full working condition and ready for immediate use This microcentrifuge is a high-quality lab instrument manufactured by MSE Sanyo (Model: MSB010. CX2. 5). A compact tabletop unit offering reliable spinning and sample separation for standard molecular biology protocols. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Kedozqf Ifopfx Akpsdu Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for the Spectrum Labs Crossflow Kjdjxv Aztjpfx Akpsdu The unit is in full working condition and is ready for immediate release Key FeaturesSpectrum Labs’ Crossflow filtration systems, notably the KrosFlo® series, are designed for laboratory-scale Tangential Flow Filtration (TFF). These systems are ideal for applications such as protein concentration, cell harvesting, and nanoparticle separation. The Spectrum Labs KrosFlo® Research I is a versatile peristaltic pump offering: Dual Pump Head Capability: Can mount two pump heads. Wide Flow Rate Range: Delivers between 0.06 to 230 mL/min, suitable for both low and high-volume applications. High Volume Efficiency: Ideal for metering and dosing tasks. Durability & Flexibility: Digitally controlled drive manages abrasive slurries, corrosive fluids, and filter aid suspensions (e.g., titanium dioxide, diatomaceous earth). Seal-less and valveless design ensures low maintenance. Compact Design: Fits easily on the benchtop, keeping it readily accessible.

Condition: used, This listing is for the Labtec SciLog Tandem 1081 ChemTec Peristaltic Pump with Tandem Model 1081 Head The unit is in full working condition and is ready for immediate use Dual‑head design Equipped with two independent pump heads, allowing simultaneous delivery of two separate fluid lines or higher combined flowrate. Ksdpfx Ajxhfg Nskpjdu Flow & pressure range Capable of delivering metered flow in applications like bioreactors, diafiltration, titration, and general chemical dosing. It handles pressures from 0 up to approximately 60 psi. Precise liquid metering Designed for volumetric and mass flow measurement tasks, maintaining consistency in dosing/reagent addition. Control interface Includes an RS‑232 serial interface for external control via software or integration into automation systems Use Cases Bio‑processing & fermentation: Automated nutrient or reagent addition in tandem line setups. Filtration processes: Controlling flow through membranes in diafiltration or tangential flow filtration. Titration and pH control: Precise dosing of acids/bases based on sensor or feedback-controller inputs. General lab fluid handling: Pumping corrosive or viscous liquids safely without contamination, thanks to peristaltic tubing.

Condition: used, This listing is for the PerkinElmer Chemagic™ 360 – Automated Nucleic Acid Extraction System The unit is in full working condition and is ready for immediate use. Each unit is on heavy duty trolley with lockable castors The Perkin Elmer Chemagic™ 360 is a high-throughput, compact benchtop instrument designed for automated DNA and RNA extraction from a wide range of sample types, including blood, plasma, saliva, tissues, and FFPE samples. It uses chemagen’s proprietary M-PVA magnetic bead technology for the efficient and reliable purification of nucleic acids, delivering high yields with excellent purity. Key Features & Benefits Flexible Sample Volume: Processes volumes from 10 µL to 10 mL, supporting a variety of protocols and sample types. High Throughput: Handles up to 96 samples per run, ideal for biobanks, clinical labs, and research institutions. Large Kit Portion Compatibility: Supports processing of large-volume samples with high reagent capacity. Cross-Contamination Prevention: Engineered protocols and magnetic separation minimize the risk of sample-to-sample contamination. Ksdpfsxhgm Rjx Akpjdu Mixed Sample Types: Able to process different sample materials in the same run, enhancing workflow efficiency. Integration Ready: Compatible with automated liquid handling platforms for streamlined workflows. Compact Footprint: Space-saving design with dimensions of 80 x 80 x 90 cm (L x W x H), suitable for constrained lab environments. Advanced Sample Handling: Offers convenient and improved sample management, reducing hands-on time. Barcode Scanning: Enables automated sample tracking and improves traceability throughout the process. LIMS Integration: Produces LIMS-compatible log files, supporting full data traceability and compliance. User-friendly Interface: Intuitive software for easy setup, protocol customization, and real-time monitoring. Technical Specifications Sample Capacity: 1–96 per run Sample Volume Range: 10 µL – 10 mL Processing Time: ~45 minutes for 400 µL whole blood Dimensions (L x W x H): 80 cm x 80 cm x 90 cm Weight: 140 kg Power Supply: 100–240 VAC, 50/60 Hz Ideal Applications Next-Generation Sequencing (NGS) PCR and qPCR Genotyping and MLPA Clinical Diagnostics Biobank Sample Preparation

Condition: used, all stainless steel belt width 1.000 mm adjustable height finished product from 2 up to 35 mm speed of the belts is separately adjustable Ksdpfx Ajz H Ul Njkpjdu with outfeed belt mobile 3 kW dimensions (l x w x h) : ± 2.400 x 1.200 x 1.500 mm

Condition: used, all stainless steel belt width 1.000 mm adjustable height finished product from 2 up to 35 mm speed of the belts is separately adjustable with outfeed belt Kdjdpfxjz H Umms Akpsu mobile 3 kW dimensions (l x w x h) : ± 2.400 x 1.200 x 1.500 mm

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Quick changeover from veneer edge to solid wood sanding possible Kedpfx Aoy Iu N Askpedu Dimensions and Weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Working table length 960 mm Working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg — Immediately available —

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and sliding table made of anodized aluminium Item number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net): approx. 690 kg Dust Extraction Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Rated duty cycle (main drive): S6 Duty cycle (main drive): 40% Sliding Table and Worktable Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 3200 mm Kdedpfexw N N Hsx Akpju Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note max. cutting height: independent of scorer Saw blade diameter: 400 mm Note saw blade diameter: independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm EQUIPMENT Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring blade motors Edging frame Material roller on edging frame Rip fence with round bar guidance Stops: two professional folding stops Edging shoe Excenter clamp Table extension Table width extension Pendulum-type saw blade guard Motorised height adjustment and tilt of saw unit, digital tilt angle display Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft businesses. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: grooving cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Kjdpfxei Anado Akpsdu Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; grooving cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (incl. pneumatic lifting mechanism), finishing station, robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Undercarriage F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for milling cutter and radius pull blade F6/28 Spray for texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock at warehouse 54634 Bitburg Immediately available - in stock.

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Maximum edge thickness: 3 mm Kdsdpfslht Hwsx Akpou Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edgebanding machine F5 Next With PLC control (including touchscreen) and with hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation including glue dispensing device, HF miter saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (including pneumatic feed), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Chassis F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for cutter and radius pull blade F6/28 Spray texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock, 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Rojek sliding table saw swiveling The machine design has many technical innovations that increase useful utility properties of this machine. The high quality workmanship makes this sliding table saw the best in its class. The machine is standard equipped with aluminum sliding table CV 360T with very precise and fixed mounting on hardened bars. The precision and reliability are guaranteed by massive swivel segment guide of the saw mechanism in the robust cast iron body and scoring unit with separate motor. Engine power 5,3 kW Motor power of separate scoring unit 0,75 (1)* kW Speed of the saw blade spindle 4400 rpm Max. Cutting height of saw blade 315 (350/ 400) 90°: 102 (120/138) mm 45°: 71 (83/86) mm Max. Saw blade diameter with scoring 315 (350/400) mm Spindle diameter of the saw blade 30 mm saw blade tilting 90° - 45°. Diameter of scoring saw blade 120 mm diameter of scoring saw blade spindle 20 mm scoring spindle speed 8530 rpm (50 Hz) table size 400 x 955 mm cutting width 800 (500;1050; 1300; 1500) mm Suction pipe diameter P 100 + 40 (80) mm Noise level with technology LpAeq 92,9 dB Net weight approx. 500 kg Sliding table CV360 size of aluminum sliding table 2500 x 360 mm Kedpjn D Araofx Akpodu Cutting length 2500 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Rojek sliding table saw PF 350 industry - execution The machine design has many technical innovations that increase useful utility properties of this machine. The high quality workmanship makes this sliding table saw the best in its class. The machine is standardly equipped with aluminum sliding table CV 360T with very precise and firm fixing on hardened bars. The machine can be equipped with an aluminum sliding table of multi-chamber, very rigid construction CV 400T, precise and rigid version with steel bar fixing. Aluminum sliding table size 400 x 3200mm. The precision and reliability are guaranteed by massive swivel segment guide of the saw mechanism in the robust cast iron body and scoring unit with separate motor. TECHNICAL SPECIFICATIONS Saw Motor power S6 40% 7,5 kW/3×400 V Motor speed 2 870/min Max. Saw blade diameter with scoring Ø 350 mm Spindle diameter 30 mm (1″) Saw blade spindle speed 4 450/min. Max. Cutting height 120 (83 [45°]), Saw blade tilting 0° ÷ 45°. Max. Cutting width 1 300 mm Scoring unit Motor power of scoring unit 0,75 kW (1 Kw) Saw blade diameter Ø 120 mm (100 mm) Kdodpfx Aken D Arhopou Spindle diameter Ø 20 mm Speed of rotation 8 530/min Machine dimensions length 3 355 mm width 3 450 mm Table height 892 mm Max. Machine height 1 460 mm Table size 1 185 x 500 mm Suction pipe diameter 100 + 100 mm Gross weight 680 kg Net weight 675 kg Aluminum sliding table CV360T table size 3 200 x 360 mm Support frame size 1 240 x 650 mm cutting length 3 200 mm Power line fuse 16 A (25 A) Noise level (without technology) 81,8 dB(A) Noise level (with technology) 85,3 dB(A) Location: Ex stock 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood Kdedotnz Ttjpfx Akpsu such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2025, Technical Data: Intake capacity: 510 l/min. Delivery capacity: 400 l/min. Maximum pressure: 10 bar Tank volume: 90 l Cylinder/stages: 2/1 Speed: 1,300 rpm Motor power: 3 kW / 400 V Description: This universal compressor with V-belt drive and high-quality components is specifically designed for tradespeople and is suitable for use in environments where the quality of compressed air, durability, and efficiency are essential. Long service life thanks to high-performance units with low speeds. Safe transport and excellent stability thanks to large wheels with parking brake. Optimal cooling through a large fan wheel. An aftercooler with cooling fins ensures a low tank inlet temperature, resulting in less moisture in the compressed air. Improved efficiency through optimized units. Standard features include: Condor pressure switch Manometer Pressure regulator with water separator and Rectus quick-release coupling Motor with overload protection Location: In stock at 54634 Bitburg - immediately available - Kedpfx Aohk Dfkskpodu