Used Baler for sale (234)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 50 t, Fully functional Bramidan B50 baler, serviced, complete set - hook, strap rolls. Njdpjxg Tk Tjfx Aaaola

Condition: good (used), functionality: fully functional, machine/vehicle number: 004, bale weight: 5 kg, power: 3 kW (4.08 HP), empty load weight: 130 kg, Used THERMOPERS, model TO6 the compact plastic waste baler for soft thermoplastics, such as wrapping and shrink films, and to process it into bales. Serial number 004. The Thermopers is the solution to handle the plastic waste stream efficiently. The material can be loaded into the Thermopers directly. When the Thermopers is full it can be closed and started, the rest of the process is fully automatic and silent. The inserted material is compressed and sealed into an easy-to-handle package of approximately 5 kg. Characteristics The volume of the plastic films is reduced by 90% with the Thermopers. Thanks to the compact size of the Thermopers and the connection to a standard 230 Volt socket, the machine is easy to apply everywhere. The Thermopers is easy to operate and the status of the compaction process is clearly displayed by LED indication. The drive of the Thermopers is fully electric and low in maintenance. The size of a package is 60 x 30 x 10 cm and has a weight of approximately 5 kg. Operation The plastic waste material can easily be loaded into the machine via the insertion valve. When the machine is fully loaded, the insertion valve is closed and the machine is started. The plastic material is compressed by a combination of pressing and heating, whereby the outside of the plastic material is sealed around the package as a mantle. Thereafter the package is cooled, and the pressing mechanism will return. When ready, the machine gives an audio signal and the compacted package can be removed. After this the machine can be used again instantly. Advantages • Easy to operate • Fully automatic and silent • Compact machine • 90% volume reduction • Prevents drifting of material • Less storage • Less transport, resulting in a reduction in CO2 emissions • Higher returns / lower costs • Low maintenance • In accordance with machinery directive, CE marked Technical data Width: 70 cm Depth: 50 cm Height: 128 cm (excluding press rods) Height: 208 cm (including press rods) Weight: 130 kg Nljdpfsr Dufbsx Aaasa Mains voltage: 230 Volts Power: 3 KW Energy consumption: approximately 1 kWh per package Sales price: 1.550 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Nlodpfx Aaexd D Nzoaja

Condition: good (used), Year of construction: 2019, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Nlodpfxsy Avlne Aaasa Bale weight: approx. 500–600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated data or possible errors. This offer is subject to change without notice, prior sale, and revocation at any time. Inspection is possible by appointment. The sale is ex works, against advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated data or possible errors. Nledpfx Aajy Avhceaea This offer is subject to change without notice, prior sale, and revocation at any time. Inspection is possible by appointment. The sale is ex works, against advance payment, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Baler Paal Pacomat II, Year of Manufacture 1979 Technical Specifications: Manufacturer: Paal Model: Pacomat II Year of Manufacture: 1979 Drive Power: 11 kW Pressing Force: 27 t Channel Cross Section: 700 x 1000 mm Filling Opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale Size: 700 x 1000 mm Bale Weight: up to 400 kg Machine Dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine Weight: approx. 5200 kg Materials: Paper, Cardboard, Film Remarks: The machine is in fully functional condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or our YouTube channel. Viewings, including under power, are possible at any time by appointment. Please note: All technical details are based on information provided by the manufacturer. We accept no liability for the accuracy or possible errors. Nsdpfx Ajyz Saljaaela Offers are subject to change, prior sale reserved, and may be revoked at any time. Viewings are possible by prior arrangement. Sale is ex works, without warranty or guarantee. Our payment terms require 100% advance payment.

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Baler Paal Konti 200 D, Year of Manufacture 2000 Technical Data: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput performance at: 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, Cardboard, Film The baler is in good condition and has been checked and tested. A video is available on our website or YouTube channel. Complete documentation is available. Nodpoyz R Uusfx Aaaela Please note: All technical data is based on manufacturer’s information. No liability is accepted for the data provided or for potential errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, advance payment only, without warranty or guarantee.

Condition: good (used), Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Baler Presto CC 40 M, Year of manufacture: 2017 Technical Specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Nljdpfx Asyz R Hqsaaja Binding: 4-fold, polyester strapping, manual Throughput rate at bulk density of: 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale size: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3,800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Operating instructions and CE declaration are available. Note: Channel discharge is fully automatic and regulated. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale is ex-works, prepayment required, without warranty or guarantee.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97020-0010, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, power: 45 kW (61.18 HP), operating pressure: 250 bar, Equipment: documentation/manual, This baler is sold by Bollegraaf Recycling Solutions. This is a HBC80 baler (45kW) with cross wires. Bale press built: 1997 Baler Nsdpfx Asxvh Dysaasla Bollegraaf HBC80 45 kW Bale dimensions: 1100 x 720 mm 45 kW main motor Intermediate hopper Conveyor chute Control cabinet Schneider PLC

Condition: good (used), Year of construction: 2008, pressing force: 30 t, Baler presses, Bramidan, 4-x 30 SLD, 30 tons pressing force – used - : Price ex location: only €3,950 (net) Manufacturer: Bramidan Model: 4-x 30 SLD Number: PEY297206-3 Year of manufacture: 2008 H: 2300mm / W: 1800mm / D: 1500mm Weight: 1,850kg 3x230/400V, 25/16 Amp, 4kW Condition: good (the photo with the warning tape is simply to indicate that the press is not being used anymore as a new, larger one has been purchased) Available: immediately Location: Husum Nlodsyzcvwjpfx Aaaoa Operating manual available

Condition: used, mileage: 70,747 km, power: 235 kW (319.51 HP), first registration: 07/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2026, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Right-hand drive, TollCollect, water cooler and intercooler, ASR, ESS, EDC engine control, BreakMatic, MAN TeleMatics 2 GPRS, driver's comfort seat with air suspension and lumbar support, MAN TeleMatics 2 GPRS radio, video function, central locking, inlays, entrance lighting, electric door windows, Brake Assist 2, emergency brake signal (ESS), turn-off assistant, side loader HS Speedline PPK 27m³, pendulum baler 3.7m³, PLC control, color camera system 4x camera+1x monitor, standard telescopic lift 1620 mm, lifter HSS 420 double comb for 2 MGB 80-240 liters EN 840-1 or 1 MGB 1.100 liters EN 840, electric central lubrication system, MD4 Nlsdpfeg Rd Ivjx Aaasa

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-tying system (9-fold binding). The baler is in good technical condition and was only used sporadically. DIMENSIONS OF THE BALER - Total length: 9700 mm - Total width: 3700 mm Nsdpfx Aaey Ayiqoajla - Transport width: 2300 mm - Height incl. chute: 3640 mm - Approx. total weight: 24 t - Ground pressure approx. 5 kg/sqcm - Heaviest part of the machine: approx. 6 tons CHUTE OPENING - Length: 1600 mm - Width: 1200 mm - Inspection door (glass) PRESSING CHAMBER - Piston stroke length: 2600 mm - WxH: 1100 x 770 mm - Volume: 2.2 cbm - The piston runs on solid rollers and is fitted with knives for cutting residual material. - The pressure on the pressing chamber (channel) is applied by two side cylinders and a simple lever system, allowing for consistent and even force distribution. HYDRAULIC EQUIPMENT - Siemens electric motor, 4-pole, 400V-50Hz, 30 kW - Hydraulic pump (Bucher) const./peak 320/400 bar - Max. working pressure 290 bar - Denison hydraulic valves 24 VDC - Pressure monitoring with proportional valve cycle - Automatic oil temperature monitoring - Automatic oil filter monitoring - Automatic oil level monitoring - Oil volume: 600L - Max. press force: 740 kN / 74 t - Specific pressure: 87 N/sqcm PLANT THROUGHPUT - Volume per press operation including pre-compression: 1.76 cbm - Average cycle time per press operation approx. 40+8 sec. - Cycle time without material 22+8 sec. - Binding time 30 sec. - Theoretical volume without binding 1.84 m3/h - Average working volume 123 m3/h - Capacity at material density 30 kg/m3: 3-4 t/h BALES - Bale length: 500 - 2000 mm - Bale width: 1100 mm - Bale height: 770 mm

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Nlodpjyuyg Sofx Aaaea Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Wire coils platform : Not included.

Condition: good (used), For sale is a Kienzle baler, model Robust 6. The machine is used but in working condition and operates flawlessly. Ideal for small businesses, warehouses, or commercial operations to compact cardboard, foil, and packaging materials. Details: - Manufacturer: Kienzle Nedpfxsy Ez Rze Aaajla - Model: Robust 6 - Condition: used, fully operational - Application: cardboard, foil, packaging materials The baler is solidly built and dependable in daily use. Normal signs of use are present, but it is technically sound. Inspection and test run on site possible. The machine is available immediately.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 15,547 h, functionality: fully functional, machine/vehicle number: W99-031.010, pressing force: 60 t, pressure: 250 bar, power: 30 kW (40.79 HP), year of last overhaul: 2024, Equipment: documentation/manual, This used baler is being sold by Bollegraaf Recycling Solutions. This is an HBC60 (30kW) baler with vertical binding. This baler can be viewed in our overhaul workshop. This baler has only 15,547 hours. Technical condition is very good! (the baler has only baled paper) This baler comes with the following options: * intermediate hopper + distributor Nljdoyux Nxepfx Aaaea * belt feed chute * bale discharge, * wire roller platforms

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, We are selling an as-new HSM baler, Model V-Press 504, from 2023. The machine was only used for demonstration purposes and is in absolutely mint condition (see photo). Nodpfsywi Hbsx Aaajla Technical data and information: - Small footprint - Modern microprocessor control with membrane keypad and graphic-capable text display - Selectable programs for cardboard and film - Secured filling flap and bale removal - Bale removal and transport with bale removal trolley - Inclination monitoring of the press plate - Automatic return stroke - Low-maintenance hydraulics - Machine dimensions: 1,020 x 812 x 1,922 mm (W x D x H) - Weight: approx. 290 kg - Motor power: 1.1 kW - Connection: 1 x 230 V / 50 Hz Schuko plug - Pressing force: 40 kN - Bale weight (depending on material): up to 60 kg - Bale size: max. 700 x 500 x 600 mm (L x W x H) - Semi-automatic 2-fold strapping with strapping tape

Condition: like new (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, machine/vehicle number: R40410, power: 371.43 kW (505.00 HP), empty load weight: 75,000 kg, cutting force: 900 t, COPEX REFLEX 900 ton mobile diesel shear baler (year 2023). Maintenance carried out by the manufacturer. Output: 10 to 22 t/h depending on the type of scrap to be sheared. Immediately available. Njdpfxjxg Ekfj Aaajla

Condition: excellent (used), Year of construction: 2023, operating hours: 12 h, functionality: fully functional, machine/vehicle number: 630207349, HSM V-Press 825 Plus Pro – barely used, only 16 bales pressed For sale is an HSM V-Press 825 Plus Pro in exceptionally low-use condition. Nlodpfx Aasyy Ddaeasa The machine has produced just 16 bales in total and is therefore practically as good as new. Ideal for businesses seeking a high-quality baler without paying the price of a new machine.

Condition: good (used), Year of construction: 2012, The pre-shredder (upper section) is not included in the offer. Only the lower part is offered. Nedpfxeyrt T Te Aaajla Paper baler / baling press PRESTO CC 40 V Manufacturer: PRESTO GmbH & Co. KG Machine type: CC 40 V Machine number: 28074 Year of manufacture: 2012 Empty weight: 4,200 kg Max. operating pressure: 260 bar Protection class: IP55 Rated current: 30 A Rated voltage: 400 V, 50 Hz Rated output: 15 kW Electrical connection: 35 A gG Machine type: horizontal baling press for paper and cardboard

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Nledpfx Aaoviwdmoaea Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, filling opening width: 920 mm, filling opening length: 1,600 mm, Hello, I am selling a fully operational Paal Comdec channel baler. The machine has been serviced and is in very good technical condition. It comes complete with a belt conveyor. In 2025, the conveyor belt was replaced. Njdpfxoyk Uzpe Aaaela

Condition: excellent (used), Year of construction: 2019, pressing force: 70 t, Equipment: documentation/manual, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. Nedpfx Aoy D Rxfeaaola This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Pressing force: 700 kN Specific pressing force: 58 N/cm² Drive power: 10.5 kW Voltage / frequency: 400 V / 50 Hz Idle capacity (theor.): 42.97 m³/h Loading opening width x length: 890 x 1020 mm Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Bale weight: 600 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 60 t, input voltage: 400 V, bale weight: 550 kg, overall weight: 2,450 kg, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Nledey D Hgxopfx Aaaoa Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-1100 Bin Compactor is ideal for material compacting in your 1100 Ltr. garbage and recycling wheelie bins. Large bulky rubbish, but also cardboard and recyclable materials can be compacted easily and safe to a minimum of its size. By compacting these waste and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 3.5 Ton Compaction: up to 80 % (material depending) Machine size: 2120 H x 1160 W x 1150 D mm Machine weight: 270 kg Transport height: 1594 mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly and safe two hand lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into wheelie bins Reduces frequency of waste collection A quality product “Made in Europe” Nljdpjn Argijfx Aaasa Suitable for compacting General waste Recyclable materials Paper and cardboard Green waste Light valuable materials Optional extras Machine colour RAL Machine galvanized Compaction head for 660 and 770 Ltr. bins Power supply 380 - 400 V (3 phase) Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Year of construction: 2026, condition: new, The BTS-Plastic Foil Compactor is the solution to keep large bulky packaging film under control. With its space-saving footprint and secure stand you can easily reduce all foil waste to a minimum of volume. The retaining ring in the plastic foil compactor prevents annoying expansion so that the foils stay where they belong. The filled bags can be baled by using a waste baler or disposed of in a recycling bin. By collecting and compacting this valuable and recyclable material you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Foil Compactor size: 1000 H x 450 W x 420 D mm Foil Compactor weight: 5.5 kg Foil Compactor colour: RAL 9006 silver Foil Compactor Bag volume: 240 Ltr. Foil Compactor Bag weight capacity: up to 15 kg Easy collecting the packaging films Clean and safe working environment Retaining ring prevents the annoying material expansion of the foils Optimum utilization of bags Reduces frequency of waste collection A quality product “Made in Germany” Suitable for collecting and compacting Bulky packaging films and foils Foam foils Optional extras BTS-Foil Bags 240 Ltr. Nodpfxjdzvhws Aaaola Plastic Foil Compactor colour RAL (minimum order 40 units) BTS-Waste Baler for plastic film and foils Plastic Film Compactor, Foil Compactor, Plastic Film Collector, Foil Collector, Sack Holder