Used Baler for sale (294)

Condition: good (used), Year of construction: 2012, operating hours: 12,078 h, functionality: fully functional, pressing force: 88 t, filling opening width: 1,100 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 30,000 kg, oil tank capacity: 2,000 l, power: 98 kW (133.24 HP), volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2012 Total operating hours: 12,078 hours, as of September 2025 Pump operating hours 6,616 hours (effective pump running time) Number of bales pressed: 65,792 bales, as of September 2025 Main press force 880 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 120 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 98 kW Total current consumption 192 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 18,000 x 4,300 x 3.270 mm (l x w x h) Press dimensions with conveyor system 18,000 x 22,000 x 5,765 mm (l x w x h) Transport weight baler approx 30 t (Main press approx. 20 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2012 Hodpfxexcngns Aacsfn Drive power 7.5 kW Belt speed 0.05 – 0.4 m/second Length of feeding conveyor 6,000 mm Height of side wall from feeding conveyor 400 mm Length of incline conveyor 9,000 mm Height of side wall from incline conveyor 800 mm Length of gooseneck 1,500 mm Incline 30° Nominal width 1,800 mm Useful width 1,700 mm Belt quality EP-500/4 Steel cleats on the rubber belt 50 x 50 mm Hollow pin chain, pitch 125 mm, rollers 36 mm Height of drive axle above ground 4,284 mm Overall height of conveyor belt 5,765 mm Transport dimensions of feeding conveyor approx. 7,000 x 2,200 x 1,250 mm (l x w x h) Transport dimensions of the incline conveyor 13,000 x 2,500 x 2,900 mm (l x w x h) Pit dimensions for the conveyor belt 14,765 x 3,260 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, baling press with bale chute, and wire drawing stations are available for sale, but without the wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 91-01611001, pressing force: 16 t, filling opening width: 545 mm, filling opening length: 680 mm, bale length: 800 mm, bale width: 600 mm, bale height: 550 mm, bale weight: 80 kg, total width: 860 mm, total height: 1,680 mm, total length: 3,530 mm, overall weight: 1,200 kg, power: 3 kW (4.08 HP), Horizontal baler that can be loaded via a chute, allowing the use of a light barrier. Tying is done manually twice with strapping tape. Price proposals are welcome. Hfedpfjv T R Utex Aacon

Condition: used, Year of construction: 2020, We offer, directly and on behalf of the owner: Cardboard baler, used Manufacturer: Unibaler (Denmark) Model: UX 4 Year of manufacture: 2020 Pressing force: 4 t Feed opening: 710 x 446 mm Feed height: 746 mm Chamber height: 1082 mm Stroke length: 550 mm Bale size: 710 x 560 x 630 mm Hfsdpfx Aajxg I Awocon Bale weight – Cardboard: 30 - 60 kg Bale weight – Plastic: 40 - 60 kg Strapping tape width: 9 mm Power supply: 230V, NO three-phase power required! Dimensions: 853 x 734 x 1986 mm Weight: 515 kg The baler comes from a reputable, well-maintained operation and is only being sold due to insufficient capacity.

Condition: used, Year of construction: 2021, Field of application: Construction Please contact ATS Norway for more information Please provide reference number upon request: 20857 Specifications: Design: Mobile, mounted on a trailer easy transport and flexible operation Rotor: Diameter: 700 mm Length: 2,800 mm Variable speed: 0%u2013200 RPM Automatic rotation direction and cleaning system 140 flat knives (60x60x30 mm), replaceable and reversible 5 static counter knives, reversible F ring system: Automatic, hydraulic feeder Cutting technology: Progressive cutting for smooth and efficient material processing Engine and operation: Engine type: Diesel Brand: SCANIA DC 13 EURO 6 Power: 407 kW Emission system: Separate AdBlue tank Control panel: Touch screen %u2013 user-friendly and in accordance with EEC standards Remote control included Efficient material handling: Hydraulic raising/lowering of the feed hopper Hsdpjwvzryofx Aacjfn Rubber track with hydraulic outlet Overbelt magnet for efficient metal separation Weight: Total weight approx. 32,000 kg   Description: MOBILE INDUSTRIAL GRINDER %u2013 MAC-S 28%u201370 HYDRO MOBILE We offer a MAC-S 28%u201370 HYDRO MOBILE, specially designed for maximum performance and flexibility. Perfect for recycling, waste management or other coarse grinding. Can be delivered within a short time. Own weight: 32000 Model: MAC-S 28-70

Condition: used, Year of construction: 1997, functionality: fully functional, power: 110 kW (149.56 HP), empty load weight: 30,000 kg, Channel baler BAUER Model: Taurus Bale dimensions: 680x1100x variable Technical data as per attached PDF. Including belt control The baler is available immediately Hfodpew Ip E Dofx Aacen

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced Hjdpfx Aovq Rtkeacsfn - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: excellent (used), Year of construction: 2015, operating hours: 19,750 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, oil tank capacity: 2,000 l, empty load weight: 33,000 kg, volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2015 Operating hours 19,750 hours, as of July 2025 Number of bales pressed: 24,760 bales, as of July 2025 Main press force 1000 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 121 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 110 kW Total current consumption 213 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Hfjdpexb Dvvefx Aacsn Press dimensions assembled 12,130 x 4,800 x 3.270 mm (l x w x h) Press dimensions with conveyor system 35,000 x 8,480 x 7,745 mm (l x w x h) Transport weight baler approx 33 t (Main press approx. 12 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition and is cleaned, lubricated and maintained by the operator on a weekly basis in accordance with the manufacturer's specifications. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2015 Belt speed 0,36 m/sec. Length feeding conveyor 7,000 mm Length elevating conveyor 14,500 mm Length goose neck 1,550 mm Grade 30° Nominal width 1,800 mm Effecting width 1,638 mm Height conveyor over all 7,745 mm Pit dimensions to conveyor belt 11,200 x 3,000 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, the transverse distribution belt and the baling press are for sale, with bale chute but without wire pulling stations and without wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2011, machine/vehicle number: 340000674, The HSM V-Press 403 baler is a compact solution for the efficient compaction of waste and recycling materials. This used baler offers excellent performance and is ideal for companies looking to optimize their waste management and save space. With its robust design and user-friendly operation, it is perfect for use in various industries. Technical details: Machine no. 6113.114 Serial number 340000674 Pressing force: 33 kN Hfodpfx Aaounzn Nocen Power supply: 400 V / 50 Hz Dimensions: approx. 1,200 x 800 x 1,500 mm (L x W x H) Output: 1.1 kW Rated current: 2.6 AMP Year of construction: 2011 Weight: approx. 300 kg

Condition: excellent (used), Year of construction: 2006, operating hours: 2,632 h, functionality: fully functional, machine/vehicle number: 29.381, pressing force: 35 t, filling opening width: 620 mm, filling opening length: 1,000 mm, total width: 2,380 mm, total height: 2,500 mm, total length: 6,625 mm, Including feed belt. The machine is immediately ready for operation. Hfsdpevaw T Ajfx Aacjn

Condition: used, Year of construction: 2017, operating hours: 6,500 h, Field of application: Construction Serial number: W09306325H2D3xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19454 Specifications: Hfjdpfovyf Dvex Aacen - 2017 model - Hours: Approx. 6500 - Weight: 25,000 kg - Central grease - Mobile - Magnetic tape - Comb extension - Follows with full comb with blades of approx. 90% - Includes 2 new original tapes - Services are taken by owner - Ready for delivery Description: Opportunity to secure a Doppstadt DW3060 from 2017. The machine is used for wood and waste. It is sold with a full comb with blades and 2 new ribbons. 3 tooth holders are broken, but the owner has both holders and blades lying around. Ready for delivery. Hours: 6500 Own weight: 25000 Total Weight: 25000 Model: DW-3060

Condition: ready for operation (used), functionality: fully functional, Brand: HSM Model: VK 20/1200 Motor: 11 kW Hfedpfxexnzf Io Aacsn Final bale size: 700 x 800 mm Bale weight: 200–350 kg

Condition: used, Year of construction: 2018, functionality: fully functional, Horizontal baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2018 Hfodjw T Rc Ijpfx Aacen Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2018 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Processed materials: Paper, cardboard, film Please note: All technical data are based on manufacturer information. We assume no liability for the details provided or for any errors. Offer is subject to prior sale and can be withdrawn at any time. An inspection is possible by appointment. Sale is ex works against advance payment, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2004, operating hours: 34,480 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 19,000 kg, transport height: 3,300 mm, oil tank capacity: 750 l, power: 45 kW (61.18 HP), Technical data baler: Manufacturer Bollegraaf Typ HBK 100 Year of construction 2004 Hours of operation 34,480 hours Press power main press 100 tons Press power of pre-press max. 42 tons Feed channel 1,600 x 1,100 mm Filling volume 3.15 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 750 l SPS controller Telemecanique TSX Micro Transport dimensions only baler 10,900 x 2,320 x 3,300 mm (l x w x h) Machine weight baler approx. 19 tons Comments: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but cuts the material between blades on the press ram and the counter blade in the frame. This makes it a cutting edge press, similar to a Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compressing paper from document destruction. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Hfsdpfx Aasxbgnhjcsn

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, pressing force: 90 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 720 mm, bale height: 1,100 mm, bale weight: 600 kg, overall weight: 32,000 kg, pressure: 300 bar, power: 110 kW (149.56 HP), BOA baler with double pre-press flaps available in fully refurbished condition. The machine is located at our workshop in Almelo and can be inspected by appointment. If required, a matching (new) conveyor belt can be produced. The machine is perfectly suited for baling various materials such as cardboard, paper, plastics, car tires, and RDF. The machine is equipped with a so-called refu-ram. This is ideal for baling materials such as plastic bottles and/or shredded RDF. Technical specifications: Drive: 2x 55 kW Hjdpfx Aoxbc U Djacsfn Pressing force: 90 tons Bale dimensions: 1100 x 720 mm Bale weight: approx. 600 kg (depending on material) Number of tying wires: 5 vertical

Condition: excellent (used), Year of construction: 1996, pressing force: 30 t, input voltage: 380 V, bale weight: 600 kg, type of input current: AC, overall weight: 3,000 kg, Manufacture: Philadelphia Tramrail Model: HT30036 Hfjdpfxom Amk Nj Aacjn Vintage: 1996 400V/45A, 3 phases, 15kW 180 bar system pressure 206 bar maximum system pressure Made of heavy-duty structural steel Average cycle time of 53 seconds Dimensions: 1980 x 1050 x 3860mm Advance height: 1400mm Baling chamber: 1600 x 760

Condition: excellent (used), Year of construction: 2006, Balemaster Year: 2006 Type: CMG 268 Hfodpfx Aaordwlkjcon Waste compactor

Condition: good (used), Year of construction: 2011, functionality: fully functional, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm Bodhzadl7zw The weight of the equipment is 2,030 kg Hedpfxjttayto Aacefn

Condition: used, Year of construction: 2005, operating hours: 16,304 h, Baling Press HSM VK 4012, Year 2005 – Incoming (expected soon) Manufacturer: HSM Model: VK 4012 Year of manufacture: 2005 Operating hours: 16,304 Pressing force: 45 t Drive power: 15 kW Hedew Tilnepfx Aacsfn Feed opening: 820 x 1250 mm (W x L) Capacity: 8.7 t/h at 50 kg/m³ Bale size: 900 x 720 x 600–1200 mm Bale weight: 250–400 kg Binding: triple, automatic Transport dimensions: approx. 7,200 x 2,300 x 2,400 mm (L x W x H) Weight: approx. 8,000 kg Materials: paper, cardboard, film

Condition: good (used), Year of construction: 2012, functionality: fully functional, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Hsdpfjttal Aox Aacjfn Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm The weight of the equipment is 2,030 kg

Condition: reconditioned (used), Year of construction: 2009, operating hours: 15,334 h, functionality: fully functional, Europress EP 6500 V5 H4, Cross Tying, Year 2009, Fully Workshop Overhauled Technical Data: Manufacturer: Europress Type: 6500 V5 H4 Year of manufacture: 2009 Operating hours: approx. 15,334 hrs Number of bales: 138,097 Main press force: 120 t Specific press force: 142 kg/cm² Feed opening dimensions: 1,650 x 1,100 mm Fill volume: 3 m³ Filling volume per press cycle: 1.58 m³ Bale dimensions: 730 x 1,100 mm Drive power: 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total connected load: 83 kW Current consumption: 150 A Binding: 5-fold vertical, 4-fold horizontal, fully automatic Bale weights: 450-900 kg Hydraulic oil tank volume: 1,200 L PLC control: Siemens S7-200 Operator panel: Siemens touchscreen Press dimensions (assembled with hopper): 13,465 x 5,200 x 5,074 mm Transport dimensions (press only): 9,965 x 2,500 x 2,900 mm (L x W x H) Hedpfx Ajw Rlf Esacefn Machine weight (press): approx. 28 t Overhaul Work Performed on the EP 6500 V5: - Completely de-rusted and repainted - Full renewal of the interior steel floor of the press - Overhaul of plunger (steel construction) - Complete overhaul of horizontal and vertical lance boxes - Full replacement of internal Hardox lining - All hydraulic hoses replaced - Both lifting cylinders renewed - Knives and counter-knives replaced - All hydraulic cylinders resealed and tested - All guide and sliding plastics renewed - Wire deflection pulleys replaced - Various cables and sensors replaced - Various electrical components (control cabinet) renewed - Complete check of electrical system/control - Full pressure test of hydraulic system Remarks: The machine has been overhauled, checked, and tested by us. You can find a video on our website or YouTube channel. Inspections, including powered operation, are possible at any time by appointment. On request, we are also happy to perform test runs with your material for a fee. For questions about the machine, you may also contact us by phone from Monday to Thursday, 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data refer to the manufacturer’s specifications. No liability is accepted for the accuracy of the information provided or for any possible errors. This offer is non-binding, subject to prior sale and can be revoked at any time. Inspection possible by appointment. Sale is ex location, without warranty or guarantee.

Condition: good (used), Year of construction: 2013, Compressive force 548 kN The size of the loading opening is 1,195 x 650 mm Bale weight up to 480 kg depending on material Binding with 4 x strapping band or 4 x wire Hfjdpfxsttav No Aacjn Bale size 1,200 x 780 x max. 1,200 mm Dimensions 1,797 x 1,062 x 2,985 mm Bodhzadl7zw The weight of the equipment is 2,030 kg

Condition: excellent (used), Year of construction: 2019, Vertical baler Dixi 50 S, year of manufacture 2019, in very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year of manufacture: 2019 Drive power: 7.5 kW Pressing force: 50 t Pressing cycle time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Hedpow Rlflsfx Aacsfn Bale size: 1200 x 800 x 830 mm Bale weight: 300–350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. The video can be found on our website or our YouTube channel. Viewings, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a handling fee. If you have questions about the machine, we are happy to answer them by phone from Monday to Thursday from 08:00 to 14:00, and on Friday from 08:00 to 13:00. Please note: All technical data is based on the manufacturer's information. We assume no liability for the details provided or for any errors. Offers are non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by prior arrangement. Sale is ex location, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2019, in very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S Year: 2019 Drive power: 7.5 kW Pressing force: 50 t Cycle time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Suitable materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, polystyrene, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our premises in 28816 Stuhr. The video can be found on our website or YouTube channel. Viewings, including live demonstrations, are possible by appointment at any time. On request, we can also carry out tests with your material for a handling fee. Hfjdpfxsw Rldne Aacon If you have any questions about the machine, please feel free to contact us by phone from Monday to Thursday between 8:00 and 14:00. On Fridays, we are available from 8:00 to 13:00. Please note: All technical specifications are based on information provided by the manufacturer. We do not accept liability for any errors or misstatements. All offers are subject to change, prior sale reserved, and can be withdrawn at any time. Viewings are possible by prior arrangement. Sale is ex-works, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Vertical baler Dixi 50 S, year of manufacture 2020, very good condition Technical Data Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 50 S PET Year of manufacture: 2020 Drive power: 7.5 kW Pressing force: 50 t Pressing time: 23 s Feed opening: 1200 x 620 mm Feed height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Tying: manual Transport dimensions: 1600 x 1300 x 2200 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, film, Styrofoam, fleece, glass wool, etc. The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good, as-new condition. The seals on the 2 cylinders for the retention clamps have been renewed. The machine was checked and tested at our site in 28816 Stuhr. The video can be found on our website or on our YouTube channel. Viewings, including under power, are possible at any time by appointment. Upon request, we can also conduct test runs with your material for a handling fee. Hfodpfx Aew Rlc Dsacsn We are happy to answer any questions about the machine by phone from Monday to Thursday, 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data are based on the manufacturer's information. We accept no liability for the information provided or for any potential errors. All offers are subject to change, prior sale reserved, and can be revoked at any time. Viewings are possible by appointment. Sale is ex location, without warranty or guarantee.

Condition: used, Year of construction: 1979, functionality: fully functional, Baler Paal Pacomat II with hopper, built in 1979 Technical data: Manufacturer: Paal Type: Pacomat II Hfedpfx Aasv Nhw Decsn Year of manufacture: 1979 Drive power: 11 kW Pressing force: 27 t Channel cross-section: 700 x 1000 mm Filling opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale size: 700 x 1000 mm Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: approx. 5200 kg Materials: paper, cardboard, film Remarks: The machine is in working order. It was checked and tested by us in 28816 Stuhr. You can find the video above with the pictures, or on our website or our YouTube channel. Viewings, including under power, are possible at any time by arrangement. On request, we can also carry out tests with your material for a fee. We are happy to answer any questions you may have about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Fridays we are there for you from 8 a.m. to 1 p.m. Please note: All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place from the location, without warranty or guarantee. Our payment terms are 100% advance payment.