Used Bale Grab for sale (1,926)

Condition: good (used), Year of construction: 2021, functionality: fully functional, pressing force: 58 t, Very good condition, fully functional, low operating hours, year of manufacture 2021, pressing force 58 tons. New price: seen for €19,500 Nedpfx Ajyzw U Uec Aslg Pressure cylinder has been dismantled for transport, inspection possible by appointment. Further presses in stock.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: V309866-20, pressing force: 126 t, filling opening width: 1,620 mm, filling opening length: 1,000 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 650 kg, total height: 7,034 mm, type of input current: DC, input voltage: 400 V, overall weight: 43,000 kg, noise level: 85 dB, pressure: 280 bar, oil tank capacity: 2,700 l, power: 160 kW (217.54 HP), empty load weight: 43,000 kg, protection type (IP code): IP55, stroke length: 2,900 mm, Equipment: documentation/manual, Nodpfxoznm H De Ac Aslg

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, pressing force: 2 t, bale length: 1,200 mm, bale width: 500 mm, bale height: 400 mm, bale weight: 100 kg, overall weight: 1,820 kg, This is a fully automatic baling machine that ties the bales with two steel wires (2.2 mm in diameter). A fan blows the waste paper into the machine through special tubes with a diameter of 100 mm. The fan and approximately 10-meter-long tube are included in the price. The machine is in working condition and can be tested. For sale due to lack of use; ideal for baling waste paper from printing and hygiene products. Njdpey Ic Rusfx Ac Ajlg

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 105102558/89, overall weight: 750 kg, Continuously fillable compactor with rotating roller collects, shreds, and compacts waste using a special steel roller, which ensures a compaction ratio of up to 9:1. It compacts the waste through alternating left/right rotation of the special roller, which continuously applies pressure to the material being fed in. It enables continuous feeding – the compacted waste remains in a transparent PE bag. The compaction station can be installed directly at the point of waste generation within the premises. It is also ideal for continuous filling via chutes or conveyor belts and is easy to operate. Nedpfxezr H Ags Ac Aslg CE standards requires particularly little maintenance.

Condition: good (used), Year of construction: 2011, operating hours: 23,105 h, functionality: fully functional, Soon available Baling press Macpresse MAC 105, pressing force 70 t, year of manufacture 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of manufacture: 2011 Operating hours: as of 09/26: 23,105 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Feed opening: 1500 x 750 mm Press chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Tying: 5-strand horizontal Nedpfszyl Htex Ac Aelg Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Hopper Note: The press is expected to be dismantled in mid/late September and can be inspected in operation until then, if desired. The conveyor belt shown in the photos is not included in the scope of delivery and can be purchased as an option. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, prior sale is reserved, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: ready for operation (used), The DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical reduction of volume of residual materials (suitable for recycling) in industry and crafts: Cardboard boxes Foam PET bottles Insulation mats and other compressible materials. Horizontal baler, waste press DIXI 60 SLD with ejector Technical specifications: Pressing force: 60 tons, Unit pressure: 6.81 kg/cm², Power supply: 400V / 7.5kW Bale dimensions: 800x1100x1200 mm, Number of ties: 3 Bale weight: approx. 370-410 kg, Tying: manual Loading aperture: 990 x 1110 mm, Machine weight: 5420 kg Average pressing cycle: 47 seconds Year of manufacture: 2011-2016 Dixi 80SLD Baler Technical data of the Baler Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Infeed opening (width x height): 1040 x 1110 mm Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size (width x height x length): 1120 x 1120 x 1200 mm Bale weight: Depending on the material, approx. 500–600 kg Bale tying: 3-fold, manual Machine dimensions: Length: 4200 mm (+cage 1600 mm) Width: 1830 mm Height: 2620 mm Machine weight: approx. 8000 kg Nlsdpfxera A E Ue Ac Aeg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016-2020 Weight: approx. 8.4 tons Condition: Used Price: 14,000 EUR

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Njdpfsra Rbgex Ac Aslg Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: new, Year of construction: 2021, Layout: Round bale grab Empty weight: 7.500 kg Attachment suited for: Lifting equipment Capacity: 32 M.T. Jaw Aperture(min-max): 160mm/2400mm Jaw Teeth Length: 200mm Open/Close Time: ~7,5 sec Nljdpfx Aopa Rmkjc Aeg Axial Rotation Time: ~30 sec Axial Rotation Time: 270° Weight: 7500kg Crane Hook Type: DIN 15401 No:40 hook Ambient Temperature: 45 ºC Max. Coil Temperature: 1100 ºC Energy Supply Voltage: 400 VAC, 3 Faz, 50 Hz

Condition: excellent (used), Year of construction: 2020, Baling press, MACFAB, – used –: Njdpfx Ajzxciioc Ajlg Price ex works: €13,500.00 (net)! Manufacturer: MACFAB Systems Ltd Type: BMF650 Auto HT RAL - MM9.8 Year of manufacture: 01/2020 Serial number: MF J144 Weight: 1770 kg Operating hours: approx. 16h Automatic operation & "Bale ready" indicator Horizontal door that pivots to the side Surface / Color: RAL6018 Feed opening: 1,500x880x769mm (WxHxD) Dimensions, press: 2,100x1,524x3,217mm (WxDxH) Former new price: €18,921.00 Condition: The machine was only used once for testing purposes. Available: immediately Location: 72336 Balingen

Condition: good (used), Bale-Pak for pressing shavings in good condition including a scraper conveyor, an ABB stacking robot and an automatic plastic wrapper Nlsdpfx Asimv N Tec Aeg

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: FLA52084COGAG5E0, Tapered die set for LAMEC 520/182 press / die set Nsdpfxjzxz U Ro Ac Ajlg - Ø6.0 x 65 / 40

Condition: good (used), Strautmann AutoLoadBaler baling press Suitable for baling: Cardboard Film PET bottles Foam Cans Electronic waste Machine dimensions (length / width / height) mm: 2047 / 2179 / 3050 Opening approx. 1192 mm / 575 mm Bale size (length / width / height) mm: 1200 / 800 / 1100 Bale weight approx. 480 kg Pressing force kN: 530 Nsdpfx Acov Aktne Aelg Year of manufacture: 2017-2018

Condition: used, Year of construction: 2015, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 6193, type of input current: three-phase, Complete recycling plant available for sale, comprising a Lindner Micromat 2000 industrial shredder together with Godswill baling equipment, conveyors, control systems and associated plant. This is a substantial industrial recycling setup, previously used for processing waste paper/cardboard and producing compact, baled material. The plant is being offered as a complete package and represents an excellent opportunity for a recycling operator looking to acquire a ready-made processing system. Main equipment includes: * Lindner Micromat 2000 industrial shredder * Manufactured in 2015 * Machine No. 6193 * Motor power 132 kW * 400V / 50Hz * Manufactured in Austria * Godswill GB-1108F baling press * Manufactured 2009 * Series No. 982472 Nodpfx Aoz Eh Ihec Aolg * 40 HP * 415V / 50Hz * 72A * Additional Godswill paper machinery/baling equipment, with a machine rated at approximately 80 HP * Hydraulic systems and associated equipment * Feed and discharge conveyors * Electrical control panels and operator controls * Safety/emergency-stop systems * Material handling and associated ducting/extraction equipment * Complete interconnected plant infrastructure as shown in photographs The machinery has all paperwork from new and installation. Low hours. All services completed and Documented. Ideal for: Waste paper and cardboard recycling • Material recovery facilities • Recycling companies • Waste processing operations • Industrial baling and shredding applications Sold as a complete plant/package.

Condition: ready for operation (used), Bramidan 4-0F Engine: 4 kW Press dimensions: 250 x 100 x 255 cm Bale dimensions: 1100 x 700 x 950 cm Bale weight: 200-250 kg Pressure: 18 tons Weight: 1580 This machine is used to reduce the volume of waste such as film, paper, etc. Price: 4300 EUR Aventek MK 2500 baling press This is an industrial baling press for compacting waste such as: Nsdpov Ai Uqjfx Ac Ajlg film cardboard/paper plastics Pressing force: 25 tons Bale weight: 400 kg, depending on the material Bale dimensions: approx. 1200 × 800 × 800 mm Cycle time: approx. 50 s Power supply: 400 V Motor power: approx. 5.5 kW Year: 2013 Price: 6500 EUR ORWAK 9020 baling press: - 2.2 kW motor - 380V - 20 ton pressure - bale dimensions: 1100x700x800 - bale weight: depends on the raw material, 200-300 kg Price: 5500 EUR

Condition: good (used), Year of construction: 2007, operating hours: 10,490 h, functionality: fully functional, Channel baling press Presto HPK 20/50 S, year of manufacture 2007 Manufacturer: Presto Type: HPK 20/50 S Year of manufacture: 2007 Operating hours: 10,490 (as of 08/2026) Drive: 22 kW Pressing force: 50 t Feed opening: 1200 x 700 mm (L x W) Channel cross-section: 700 x 750 mm Feed volume, max. 0.63 m³ Cycle time: 23 s Tying: 3-fold, automatic Throughput at Nljdpfx Aozvbbrjc Ajg 35 kg/cbm: 2.9 t/h 60 kg/cbm: 4.3 t/h 100 kg/cbm: 6.3 t/h Bale weight: up to 450 kg Machine dimensions: 6750 x 1350 x 2350 mm (L x W x H) Machine weight: approx. 7,500 kg Materials: Paper, cardboard, film Note: The press is in good condition and is currently still in operation. An inspection can be arranged. The machine will be available from the end of 2026. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections can be arranged. The sale is made with advance payment, ex works, without warranty.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Nlodpfjzp H R Ejx Ac Asg Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, Year of construction: 2013, functionality: unexamined, overall weight: 8,500 kg, Klanke S-45 HKV – Industrial/Machine Drive, 24 kW, 400 V For sale is a Klanke S-45 HKV machine/machine drive from Klanke Maschinenvertrieb. Technical data according to the nameplate: Manufacturer: Klanke Maschinenvertrieb Type: S-45 HKV Machine No.: 13201 Drive power: 24 kW Rated voltage: 400 V Nodpfxsz Daudj Ac Aolg Frequency: 50 Hz Year of manufacture: 12/2013 Weight: approx. 8.5 t CE marking present The machine comes from a commercial operation. Condition: used. The exact technical condition can be checked during an inspection. Sold as shown in the pictures.

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Nedpfxjic Rl Do Ac Aslg Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 19439, pressing force: 38 t, type of input current: three-phase, input voltage: 400 V, input current: 32 A, pressure: 200 bar, oil tank capacity: 80 l, year of last overhaul: 2023, operating pressure: 200 bar, input frequency: 50 Hz, Avermann AVOS SP-12 stationary baling container | Overhauled in 2023 | Not used since For sale: Avermann AVOS SP-12 stationary baling container, year of manufacture 2014. This reliable Avermann baling container was overhauled by us in 2023 and has not been used since the overhaul. As a result, this is an interesting machine for anyone looking for a well-maintained used baling container that can be put back into operation immediately. The AVOS SP-12 is a robust baling container, suitable for compacting various waste streams and ideally applicable in industries, logistics companies, manufacturing companies, and waste processing plants. Technical data: Brand: Avermann Nodpfez Enubex Ac Aolg Type: AVOS SP-12 Year of manufacture: 2014 Serial number: 19439 Power: 7.5 kW Power supply: 3 x 400 V + N + PE, 50 Hz Fuse rating: 32 A Maximum working pressure: 200 bar Protection class: IP55 Integrated hydraulic pressing unit Large feed opening Suitable for transport with a hook lift Specifics: The machine was overhauled by us in 2023. After this overhaul, the baling container has not been used and has been idle since. The machine is in good used condition visually. There are, of course, some minor signs of wear and tear that are consistent with the age and type of machine. A great opportunity for companies looking for a professional Avermann baling container at a more attractive investment than a new one. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, AVOS, SP-12, baling container, waste compactor, container compactor, waste compaction, recycling, compactor, pressing unit, self-compacting container.

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2013 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Nledsz A S A Repfx Ac Ajg Dimensions of the feed opening: 119.5 cm x 65 cm The HSM 1160 V-Press features easy operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: used, Year of construction: 1986, functionality: fully functional, AUTEFA Bale Press LIFT BOX - semi-automatic bale press - 2-chamber system - pre-press - final press - automatic TITAN strapping machine - control unit renewed in 2015 - hydraulics completely renewed in 2018 - condenser new in 2012 - fork bale removal trolley Nledpfoytb Sgsx Ac Asg - transport segments (roller conveyors) - turntable - roller conveyor scale - roller conveyor lift table - packaging material - bale size WxLxH 1250x750x1100 mm - bale weight approx. 330 kg - daily throughput 25-30 t System available 2x (price per unit) Please note that disassembly, packing, and shipping/collection must be carried out by the buyer.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2026, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of statutory value-added tax, ex works and without packaging. The press has been cleaned, functionally tested, repaired and equipped with a new control system in accordance with EN16500. All replacement parts used are original parts from Strautmann. Technical details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale dimensions (L x W x H): 1180 x 700 x 800 mm External dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 600 mm Pressing force: 59 tons / 580 kN Throughput: 1 - 2 bales / hour Number of belt channels: 4 Binding material: Wire Weight of the press: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Nedpfxev Rzwme Ac Aolg Installation location: indoors / outdoors, covered Includes starter kit for bale strapping, 19mm Serial number: 610.00.184 Year of manufacture: 2003

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: E16352-1, Avermann AVOS SP-12 stationary baling press | Overhauled in 2023 | Not used since For sale: Avermann AVOS SP-12 stationary baling press, manufactured in 2010. Nodpfx Acsz Eqr Ao Aolg This robust Avermann baling press was overhauled by us in 2023 and has not been used since. This makes it an interesting machine for those looking for a well-maintained used baling press that can be put back into operation immediately. The AVOS SP-12 is a robust baling press, suitable for compacting various waste streams and ideally applicable in industries such as manufacturing, logistics, production companies, and waste processing. Technical specifications: Brand: Avermann Type: AVOS SP-12 Year of manufacture: 2010 Serial number: E16352-1 Power: 7.5 kW Power supply: 3 x 400 V + N + PE, 50 Hz Fuse rating: 32 A Maximum working pressure: 200 bar Protection class: IP55 Integrated hydraulic press system Large feed opening Suitable for transport with a hooklift Special features: The machine was overhauled by us in 2023. After this overhaul, the baling press was not used and has remained idle since. Visually, the machine is in good, used condition. There are, of course, some minor signs of wear that are consistent with the age and type of machine. A great opportunity for companies looking for a professional Avermann baling press at a more attractive investment than a new one. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, AVOS, SP-12, baling press, waste compactor, container press, waste compaction, recycling, compactor, press system, self-compacting container.

Condition: used, Year of construction: 1992, operating hours: 10,150 h, This Eder mobile crane, model M 825 B, used in the sawmill, was manufactured in 1992 and has approximately 10,150 operating hours. The crane is equipped with a Hultdins SuperSaw tree grapple, including a saw, which can be used to move and shorten logs. Saw blade: 75 cm. Clamp: 58 cm. Rotor: 16,000 kg. If you have any questions or would like more information, please feel free to send us a message or call us. Nledjyzpg Aopfx Ac Asg

Condition: used, Year of construction: 2018, Avermann baling press, type AVOS 1810 BRK-90/100, year of manufacture 2018, cross-tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of the feed hopper: 1,800 x 1,000 mm Throughput capacity at 35 kg/m³: 15.0 t/h Throughput capacity at 60 kg/m³: 20.0 t/h Throughput capacity at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, depending on the material Nledpfozqc Ngex Ac Ajg Tying: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Machine weight: approx. 29,000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.