Used Bale Collect Dare for sale (3,958)

Condition: good (used), Baler Hsm 155.1 vl Pressure force:, 18 tons, Unit pressure:, 2.33 kg/cm², Theoretical capacity:, 3 bales.h i.e. approx. 500kg/h Beam dimensions:, 1100x700x800 mm, Beam weight:, 150-250 kg, , Blodpfx Adov Alacjxop Power supply:, 400 V/4 kW, ,

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 5536, pressing force: 50 t, filling opening width: 1,252 mm, filling opening length: 1,100 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 500 kg, total width: 3,000 mm, total height: 3,000 mm, total length: 9,500 mm, feed length X-axis: 1,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 1,200 mm, type of input current: three-phase, input voltage: 400 V, input current: 100 A, overall weight: 16,000 kg, noise level: 80 dB, pressure: 250 bar, pressure (max.): 250 bar, opening width: 1,100 mm, control cabinet height: 1,700 mm, control cabinet width: 700 mm, control cabinet length: 900 mm, oil tank capacity: 600 l, power: 45 kW (61.18 HP), empty load weight: 16,000 kg, volume flow: 16,000 m³/h, operating pressure: 200 bar, transport width: 3,000 mm, protection type (IP code): IP55, Equipment: compressor, documentation/manual, Presona LP50VH3, and as a bonus, you also get the Presona PP1500-500. The PP1500-500 is actually an auxiliary device used for specific tasks, such as precise cutting or additional processing of material, which the base machine itself does not handle. So the PP1500-500 is there to allow you to perform additional specialized operations that the main machine cannot do. Blodsxfr Aljpfx Adxep

Condition: new, total length: 7,500 mm, total width: 2,500 mm, color: grey, Year of construction: 2022, Carrying capacity: 12.000 kg Tyre size on axle 1: 500/50/17 Blsdpfx Aewdq Dbedxjp Tyre size on axle 2: 500/50/17 Tyre size on axle rear: 500/50/17

Condition: used, functionality: fully functional, Range of motion: 550–1700 mm Blodpfxexbga Rj Adxjp Load capacity: 1600 kg Grip plate size: 1000 x 1000 mm

Year of construction: 1994, condition: ready for operation (used), Motor power: 15.5kW/19.5kW, pressing force: 320kN, spec. pressure: 425kN/m², machine dimensions X/Y/Z: approx. 5700mm/1900mm/1800mm, weight: approx. 6000kg. The machine has a defect due to moisture and should be checked. Bodpfx Adoip D Rpexjlp

Condition: excellent (used), Year of construction: 2022, operating hours: 8,856 h, functionality: fully functional, working length: 12,000 mm, Press Bsdpfx Asxfg Sbjdxolp Refurbished 12m length Everything in perfect condition Operational Located at company headquarters.

Condition: excellent (used), Technical data: Bjdov Akmzjpfx Adxolp Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, filling opening width: 1,200 mm, filling opening length: 1,600 mm, bale width: 300 mm, bale height: 300 mm, total width: 4,600 mm, total height: 2,244 mm, total length: 6,130 mm, input voltage: 380 V, overall weight: 16,500 kg, power: 55 kW (74.78 HP), Equipment: documentation/manual, Bale clamp 300 x 300 mm. Very good condition. Well maintained. Bjdpfxsxcazwj Adxolp

Year of construction: 2008, condition: good (used), Horizontal baling press Build in 2008 Bsdpsg Ibt Nsfx Adxolp Bale size 800x1000x1400 Loading height 1250mm

Condition: used, Year of construction: 2015, load capacity: 2,500 kg, Bale clamp Load center: 800 ISO class: ISO class 3 = 2,500 - 4,999 kg Technical condition: very good Description: 3 more bale clamps in stock (8860, 8859, 8858) Blsdpeu D Ra Isfx Adxjp

Year of construction: 1990, condition: ready for operation (used), Two AUTEFA baling presses including automatic bale strapping are available. Press force: 70t, pre-press force: 25t, press dimensions X/Y: 1100mm/600mm, drive: hydraulic, power consumption: 22kW, press capacity: 4 bales/h, bale weight range: 400kg-800kg, material feed diameter: 250mm, machine dimensions X/Y/Z: approx. 4000mm/2000mm/3000mm, weight: approx. 7000kg. Documentation available. On-site inspection is possible. Bedpfxev Tnx Aj Adxelp

Condition: used, functionality: fully functional, Year of construction: 2013, load capacity: 850 kg, empty load weight: 610 kg, opening width: 2,400 mm, Bale clamp Condition: Ready for use and fully functional Blodjuhwz Ropfx Adxop Technical condition: good Description: Fast and uncomplicated transportation possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Errors and prior sale reserved, sale only to traders... every sale of used goods takes place under exclusion of warranty and or guarantee.

Condition: good (used), - Large filling opening, ideal for large boxes Bljdpfx Asv Amv Eodxop - Container tipper for convenient filling Pressing force in kN: 400 Bale length: 1,100 mm Bale width: 750 mm Bale height: 750 mm Press length: 5,640 mm Press width: 1,674 mm Press height: 2,500 mm Weight: 4,450 kg - Motor power in kW: 9 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 350 kg - Manual binding: 3 times with wire Year of manufacture: 2013 HSM HL 4010 LI baler - Large filling opening, ideal for large boxes - Container tipper for convenient filling Pressing force in kN: 400 - Motor power in kW: 9.5 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 350 kg - Manual binding: 3 times with wire Year of manufacture: 2012

Condition: good (used), Year of construction: 1985, -KOM 421 Offered here is a Bunion brace of company Tigrip type TR 0.75 / 1050. The Bale clamp works mechanically and is therefore in perfect condition! Gripping area: 700 – 1050 Blsdpfx Asdl T Hlodxop Capacity: 0.75 t All other information, please refer to the pictures. Pick up is shipping for free-please enquire. You get a proper invoice with expelled VAT when purchasing Interest or questions, please register by E-Mail!

Condition: new, Year of construction: 2023, _____Bale dimensions 1.20 x 1.00 - 1.50 mMax. bale weight 1,100 kgTotal length: 4.55 metersTotal height: 2.51 metersLoading system: Side loading arm with clamping deviceWrapping table: 4 beltsBale guide rollers on the wrapping table: 2 x adjustable Film end sensor, wrapping process stops when the film runs out or breaksVT 30 terminalFully automatic film cutter1 EW and 1 pressureless return or 1 DWSpecial equipmentMagazine for 4 film rolls,Storage location:null Bjdpfx Ajki Einedxolp

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 161.40.492, Used Strautmann bale press, type: BalePress 3, serial number: 161.40.492, year of construction: 2020, with tape extraction hook Power supply: 230 V 50 Hz Electrical Power: 0,75 kW Protection class: IP54 Pressing force: 27 kN Press stroke: 580 mm Weight of the machine: 275 kg Transport dimensions (lxwxh):1070 x 754 x 2110 mm (without pallet) 1070 x 754 x 1945 mm Filling opening (wxh): ca. 700 x 450 mm Cycle Time: 27 sec. Bale weight 30 kg Bale size in the chamber (lxwxh)*: 500 x 700 x 500 mm Bale tying: strapping with two twines, PP band ADVANTAGES Easy to install and transport Easy to handle bales Practical emptying of bales Blsdpfx Adevvk T Isxjp Foil/cardboard mode switch Simple and safe operation Stable door locking system Stable guide of the press plate "D" level security system. Small space required BP3: Bale tying system with open door; BP3CD: tied bales with door closed Solid construction Wheel door lock Ideal for small shops. The Strautmann BalePress 3/3CD is a small, single-chamber baler. At the same time, it is perfectly suited for baling common and smaller quantities of paper, foil, PET bottles and plastic waste and, thanks to its compact design, it can also fit into a very small space. It is clearly the best alternative for our partners with less waste and a waste container with a small footprint. Depending on the pressed material, the 3 ton pressing force can result in a volume reduction of up to 90%. The machine can produce relatively small and therefore easy to handle bales of up to 35 kg. By using it, significant savings in storage and transportation costs can be achieved. Bales are easier to transport and sell than untreated waste. Due to its dimensions, the machine can also fit in a very small space, and because of this, the baling technology is no longer available to our partners who have limited space. Price 3.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2004, condition: ready for operation (used), Connected load: 15.5kW, weight: 6.8t. Blsdpfeip D Rzox Adxop

Condition: ready for operation (used), Model: HSM V-Press 1160 Plus Baler Pressing force (kN): 532 Blodpera Nyusfx Adxsp Output (bales/h): 1–2 Max. bale size (mm): 1200x1100x1000–1200 Dimensions (L x W x H) (mm): 1780x1150x2985 Power (kW): 7.5 Year 2007–2008 price €5,500 year 2009–2010 price €5,800 year 2011–2013 price €6,300 We also offer HSM V-Press 1160 Max balers, year 2014–2015 Weight (kg): 2,300 ALSO AVAILABLE: 2017–2018 models – €7,500

Year of construction: 2016, condition: ready for operation (used), Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h. Blsdpfx Adeirakgsxep

Condition: ready for operation (used), Bramidan 4-0F Motor: 4 kW Press dimensions: 250 x 100 x 255 cm Bale dimensions: 1100 x 700 x 950 mm Bale weight: 200–250 kg Pressing force: 18 tons Weight: 1580 kg This machine is used to reduce the volume of waste such as film, cardboard, etc. Bjdpfx Ajv Ai Uqedxslp We also have a Bramidan 3-chamber baler available.

Condition: good (used), B5 – Ideal for large cartons: High throughput – large capacity Bale is ejected automatically Strap rollers positioned at the front for easy strap replacement Cardboard bale weight (kg): 80-110 Plastic film bale weight (kg): 90-130 Bale size WxDxH (mm): 1000 x 700 x 800 Pressing force (t): 5 Power supply: 1x230V 50Hz 10A Motor (kW): 1.1 Noise level (dB): 65-68 Average cycle time (sec): 33 Dimensions WxDxH (mm): 1360 x 895 x 2370 Weight (kg): 600 Feed opening W x H (mm): 1000 x 500 Year 2015-16 price: 4000 EUR Bljdpfjv Aktnjx Adxjp Year 2014 price: 3500 EUR

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Bledpfjra Nrxox Adxop Pressure force: 42 tons Beam dimensions: 700 x 800 x 600 - 1200 mm Beam weight: approx. 450 kg Press length approx. 7 meters press weight approx. 6000 kg tying 4 x wire automatically

Condition: good (used), Bramidan B 20 Baler Bale dimensions – WxDxH (mm): 1200 x 800 x 800 Feed opening WxH (mm): 1200 x 480 Pressing force: 20 tons Motor (kW): 4.0 Cycle time (s): 36 / 21 Baler dimensions WxDxH (mm): 1775 x 1030 x 2790 Weight (kg): 1600 Stroke (mm): 750 Number of tying points: 4 Year of manufacture: 2012 – 2017 Bramidan X25 – High-performance baler for waste compaction Suitable for various materials, including stretchable types Large, wide chamber Retaining clamps prevent material expansion inside the chamber Short cycle times allow for rapid waste processing TYPES OF WASTE: Cardboard Plastic film Paper PET bottles Aluminum cans Rigid plastics Textiles EPS foam Steel cans BALE DIMENSIONS 1200 x 800 x 800 mm Bsdpsv Aku Sofx Adxelp PRESS FORCE 25 t BALE WEIGHT Cardboard (kg): 200-300 Plastic film (kg): 250-350 Year of manufacture: 2012–2018 Price: 5,500 EUR

Condition: excellent (used), Manufacturer: Strautmann Model: PP 1207 Plus Bale size (LxWxH): 1200 x 1100 x 730 mm Bale weight: approx. 400 - 500 kg External dimensions (LxWxH): 1850 x 1047 x 3079 mm Transport height: 2500 mm Filling opening: 1190 x 600 mm Pressing force: 59 t / 580 kN Performance: 1 - 2 bales/hour Number of ties: 4 Press weight: 2300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: sheltered indoor/outdoor Bledpfx Ajv Aiymodxjp Noise level: less than 80 dB(A) Year of manufacture: 2003–2007 I also have Strautmann PP 1207 balers from 2010–2011, price 5500 EUR I also have Strautmann PP 1208 balers from 2014–2015

Condition: ready for operation (used), Hsm V-Press 860 Baler, year of manufacture: 2005-2009, price: €5,600 Compression force: 54 kN Specific pressure: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening (W x H): 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Consumables: Wire Pressed material: film, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene Hsm V-Press 860 Plus Baler, year of manufacture: 2013-2015, price: €7,500 Hsm V-Press 860 L Baler, year of manufacture: 2015, price: €9,000 Hsm V-Press 860 Plus Baler, year of manufacture: 2019, price: €9,000 Hsm V-Press 860, ex-demo, year of manufacture: 2020, price: €13,000 Fourfold bale strapping with wire Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight (kg): approx. 500 kg Technical data: (L x W x H, mm): 1,213 x 1,824 x 2,987 Loading aperture (mm): 1,200 x 565 Cycle time (s): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Hsm V-Press 860 Plus B Baler, year of manufacture: 2020, price: €14,000 Pressing force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Blodpfx Adjra Rbgsxop Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Filling method: Manual Dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Weight: 2,336 kg Consumable type: Wire Pressable materials: film, cardboard Idle cycle time: 25 s