Used Bain Marie for sale (66)

Condition: new, Year of construction: 2023, The K’MX 920 CLEVER sliding headstock automatic lathe is designed for machining complex workpieces up to Ø 20 mm. The lathe is equipped as standard with two electrospindles with a maximum speed of 12.000 rpm each. With its nine axes, comb + turret on three axes and independent end unit, this machine is capable of having four tools in the material for an optimised cycle time. 9 linear axis 1 independent rack with 10 positions Cross-section of outer tools 12 x 12 mm Nedsk Dz Dijpfx Adbjwc Turret number of stations 12

Condition: used, Year of construction: 2006, Used INDEX MS 32 C lathe Equipment: Nedpfoxgh Eljx Adbjwc -2 NCU -SIR MS32P with shelves, length 3300 mm, screwed rails -Counter spindle -KNOLL complete with 1 HP pump -Bar stop control -Programmable inputs/outputs -4 tool breakage checks -1 NCU1 and 3 NCU2 rotary tool drives -1 WTO stroke doubler, 3 positions, motorized on station 1 -2 drilling units with 6044 motor sold with the machine. -Transmit Equipment listed below with : CNC axis: 1.1 XZ 1.2 Z 2.1 Z 2.2 XZ 3.1 XZ 3.2 XZ 4.1 XZ 4.2 XZ 5.1 XZ 5.2 XZ 6.1 XZ 6.2 XZ

Condition: new, K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle. The stroke of the spindle is up to 400 mm. The two separate tools racks can simultaneously machining (ex roughing and finishing). The two separate tools racks can simultaneously machining (ex roughing and finishing). Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling. These 2 tools racks are complemented by end working attachment for internal operations with the possibility to turn simultaneously on the main and sub-spindle. In optional, possibility to mill thanks to ddriven tools. The large space permits better chip evacuation and maximum accessibility. - Rigid - Large working space - Up to 4 simultaneous cutting tools in contact - 2 independent racks with 5 positions Nsdpfouq A D Rox Adbowc

Condition: refurbished (used), Machine rebuilt with : - AC spindles feed and speed motor - PLC Siemens Simatic HMI - New siemens electrical cabinet Nodpfjir Icwex Adbewc - Bar holder and its support - 6 advance tubes - 6 clamping tubes - Optional equipment - C standards machine

Condition: refurbished (used), Série n° 30 389 Machine reconstruite avec : - Moteur des avances et vitesses broches AC - PLC Siemens Simatic HMI - Armoire électrique neuve siemens - Porte barre et son support - 6 tubes d'avance - 6 tubes de serrage - Appareillages en option - Machine au normes C Nwsdpfx Ajir Imcsdbjc

Condition: new, K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle. The stroke of the spindle is up to 400 mm. The two separate tools racks can simultaneously machining (ex roughing and finishing). The two separate tools racks can simultaneously machining (ex roughing and finishing). Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling. These 2 tools racks are complemented by end working attachment for internal operations with the possibility to turn simultaneously on the main and sub-spindle. In optional, possibility to mill thanks to ddriven tools. The large space permits better chip evacuation and maximum accessibility. Nedpfxeunr H Aj Adbjwc - Rigid - Large working space - Up to 4 simultaneous cutting tools in contact - 2 independent racks with 5 positions

Year of construction: 2004, condition: excellent (used), Swiss type lathes MANURHIN K'MX overhauled with : – Spindle, counter spindle, geometry and changes of all non-conforming parts. Rotating tool on: rear comb, front comb, end unit, radial and axial counter operation C-axis on: main spindle and counter spindle Njdjir Id Uepfx Adbswc Rigid tapping on: main spindle and backworking spindle High-pressure Predispo Year of construction 2004 – approx. 22 000 h

Condition: excellent (used), Multispindle lathe GILDEMEISTER GM 35 with spindle stop n°4901/0067 with bar loader Giovanni DMB36 year 1999 n°DBM99294 - Hydraulic pick-up - Back burring slide Nedpfxoix I Dgo Adbjwc - 5 front spindles - 4 long turning slides pos.1, 2, 4, 5 - Part catcher - End of bar catcher - Swarf conveyor - Part belt conveyor

Condition: new, MANURHIN K'MX 520 is designed for the productive machining of workpieces consisting of bars with a maximum diameter of 20 mm. The machine is equipped as standard with two electrospindles with a maximum speed of 12,000 rpm and a rotating guide bush synchronised with the main spindle by means of pulleys and belts. Five CNC linear axes (X1, Y1, Z1, X2, Z2), two rotary axes (C1, C2). Main features : - Max. bar material diameter 20 mm Nsdpfx Asuqirbjdbjwc - 12,000 rpm on both spindles - 8,400 rpm driven tools - Main spindle power 3.7/5.5 kW - Headstock travel 210 mm - Number of tools in the cut at the same time: 2

Condition: refurbished (used), MORI-SAY 6/32 check over in standart configuration complete with : - 4 compound slides at stations 1-2-4-5 with independent movement - SIEMENS model S5 Simodrive motors for conditions feed speed ranges Chips conveyor : Removable tank with swarf conveyor Nwsdpfxeun Sfxo Adboc Pick-up : Synchro pick-up Pick-up brake Hydraulic slide for back machining Other attachments and special attachments on request

Year of construction: 2002, condition: excellent (used), 3D coordinate measuring machine in post and beam construction *On-floor installation on steel feet *Height floor to measuring plate: 650 mm Measuring range X 2.100 , Y 1.600 , Z 2.100 [mm] Uncertainty of measurement 25 + L/70, max. 50 [µm] at L=3,000 mm Dynamics Nsdpfx Adohlqapebowc 3D traverse speed 220 mm/sec 3D acceleration 1000 mm/sec² Touch probe Renishaw PH10M Renishaw TP20+2 modules Control system Pantec Eagle Pro / WPC2040 Joystick HT400 Software POLYWORKS Inspector (alternative possible) Optional technologies MCR20 stylus changing bank Services of the supplier Transport, commissioning , calibration , final inspection Warranty 12 months from the date of acceptance

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: type plate available, Fast precision coordinate measuring machine and gear measuring center. Moving gantry with patented TRICISION™ technology X 900 / Y 1500 / Z 700 B5 control system (retrofit 2021) High-resolution Leitz LSP-S2 3D measuring head Measurement uncertainty according to DIN EN ISO 10360-2: 0.9 + L/350 µm Nodpfxsv S Dk Es Adbjwc 8-position probe change system Large package with probe accessories PCDMIS CAD++ 2024 software 12-month warranty Computer, 32" screen Installation, commissioning, and acceptance according to DIN EN ISO 10360-2, 4, and 5

Year of construction: 2004, condition: excellent (used), 3D coordinate measuring machine in post and beam construction *On-floor installation on steel feet *Height floor to measuring plate: 600 mm Measuring range *X 3.200 , Y 1.600 , Z 1.800 [mm] Uncertainty of measurement *30 + L/40, max. 60 [µm] at L=3,000 mm Dynamics *3D-travel speed 220 mm/sec *3D acceleration 1000 mm/sec² Touch probe *Renishaw PHS / alternatively PH10M *Renishaw TP20+2 modules Control system *Pantec Eagle Pro Radio control unit *Hand control HT400 Software POLYWORKS Inspector Nwsdpjhlqknofx Adbec Optional technologies MCR20 stylus changing bench Stylus changing bank ACR3 Optical scanner KREON or NIKON Services of the supplier transport, commissioning , calibration , final inspection Warranty 12 months from the date of acceptance

Year of construction: 2008, condition: excellent (used), ZEISS ACCURA 16.24.10 RDS-CAA X 1,600 / Y 2,400 / Z 1,000 RDS CAA touch probe with VAST XXT technology Stylus changing system 8 positions Control C99 Software on request - Calypso / HolosNT Warranty 12 months Installation, commissioning, acceptance according to DIN EN ISO 10360-2,4,5 Nwedpfx Adsnp Hvuoboc

Year of construction: 2013, condition: like new (used), 3D coordinate measuring machine in portal design * precise CMM with strong performance * touch probe TESA-STAR-M (motorized), 7.5° indexable Measuring range * X 900 , Y 1.500 , Z 800 [mm] Uncertainty of measurement * 2.7 + L/333 , max. 5.0 [µm] Dynamics (without active vibration isolation) * 3D travel speed 300 mm/sec * 3D acceleration 1.5 m/sec² Touch probe * TESA STAR M - motorized * Renishaw TP20 / TP200 Control system * Hexagon DC240 - Software * PCDMIS CAD++ 2021 * incl. CAD interface CATIA V5 (import) accessories : * stylus set , extensions , modules Optional services * We offer transport, commissioning, acceptance, calibration * Calibration according to DIN EN ISO 10360-2 Warranty * 12 months from date of acceptance Nsdpfx Aoh T Dz Asdbewc

Year of construction: 2016, condition: like new (used), Double column CMG Nodjh T U Dfjpfx Adbewc *Installation in floor level design Measuring range * X 6,000 , Y 1,600 , Z 2,500 [mm] * Overlap of the uprights in Y = 100 mm Uncertainty of measurement single column : 25 + L/70, max. 60 [µm] at L=6.000 mm Double stand : 50 + L/70, max. 100 [µm] at L=6,000 mm Dynamics 3D traverse speed 400 mm/sec 3D acceleration 1200 mm/sec² Touch probe (per column) * Renishaw PH10M * Renishaw TP20+2 modules Control system (per stand) * WENZEL WPC2040 (Pantec Eagle Pro) Radio control unit * Hand control HT400 Software * POLYWORKS * alternative solutions possible Accessories * Calibration ball holder - 3 times equipped * stylus assortment * TP-20 modules * Calculator , Screen Keyboard (per stand) Services of the supplier * transport, commissioning , calibration , final inspection Warranty * 12 months from the date of acceptance