Used Automatic Mitre Saw for sale (26,042)

Condition: good (used), Year of construction: 1998, Cutting length 6000 mm Bjdpfxjyz Il Rs Akajdb Saw blade diameter 500 mm Mitre cuts swivelled from 22.5° outward to 45° inward Two-hand operation with intermittent spray device

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Bdodpfx Aewuck Iekajb Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF

Condition: new, Mitre saw with a saw blade diameter from 400mm up to 800mm - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and tilt angle of clamping cylinders infinitely adjustable) - Two-hand safety control Optional available: - Automatic mitre adjustment - Hydraulic saw feed - Hydraulic clamping device - Roller conveyor with length stop or positioning system - Version as fully automated saw - Preload magazine - Horizontal clamping device - Extraction system Bedpfx Aed Rhziskasdb - Further accessories on request We are happy to provide you with an offer tailored to your specific requirements. The machine can be inspected and tested in 56812.

Condition: used, Year of construction: 2005, dimensions of saw-band 4400 x 34 x1,1 mm capacity 90 degrees: round 335 mm capacity 90 degrees: flat 500x335 mm cutting speed 15-150 m/min weight of the machine ca. 1.550 kg Bsdpfx Asyv Ncmjkaedb

Condition: used, Year of construction: 2001, saw blade diameter 350 mm 190 mm Bedpfsyvvpmex Akasdb speeds 15 / 30 / 45 / 90 U/min power requirement 1,8 / 2,6 kW kW

Condition: good (used), Year of construction: 2003, Horizontal bandsaw fully automatic with gripper feed Cutting capacity 90° round: 400 mm square: 400 x 400 mm Cutting speed: 15 - 90 m/min Working height: 800 mm Saw blade dimensions: 4570 x 41 x 1.3 mm Material feed per stroke: 560 mm Multiple feed: up to 9 times = 5040 mm Motor power: 5.5 kW Dimensions (L x W x H): 2250 x 2850 x 1700 mm Weight: 2500 kg Accessories / Special features: • Fully hydraulic: workpiece clamping, saw feed, bow lifting, and material feed Bodsynaz Nspfx Akasdb • Gripper feed system • Screw conveyor swarf remover • Fully automatic operation or single cuts • Automatic bow lifting height adjustment according to material diameter • Max. cut length: 560 mm with single feed • 5040 mm with multiple feed • Hydraulic clamping pressure regulation for the vise • Saw band guidance via deflection rollers and carbide jaws • Constant saw band tension with automatic shutdown in case of blade breakage • Coolant system • Piece counter • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm 560 x 630 mm dimensions of saw-band 7.400 x 54 x 1,60 mm Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min Bdjdpfxjvxwkfs Akaeb height of material-table 700 mm total power requirement 12,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Ks Kesmak KME 350 Shaft cutting diameter: 350 mm Bjdpey H Rbfofx Akaodb Square: 340 x 340 mm Rectangle: 340 x 415 mm Hydraulic control of the bandsaw arm Hydraulic control of the vise Hydraulic blade tension sensor PLC controller Mechanical feed with rollers in the vise Electronic setting of cut part length and quantity Feed cycle up to 6000 mm, any length and quantity Membrane control panel Bundle cutting possible (upper clamp) Stepless blade speed adjustment: 20-120 m/min Roller feeder 1200 mm Documentation Year 2024

Condition: new, Year of construction: 2025, TVM Ø 400 - The Versatile and Customizable Saw for Your Carpentry Workshop The TVM 400 is the all-purpose saw that is essential for your workshop. With a solid and high-performance structure, it is designed to provide an excellent solution for cutting small-section woods, quickly eliminating knots and imperfections. Thanks to the option of customizing it with accessories such as roller conveyors and stops, the TVM 400 ensures maximum versatility and productivity (discover more details in the ACCESSORIES section). Key Features: Efficient and Cost-Effective: Ideal for small and medium-sized carpentry workshops, offering excellent value for money. Ease of Use: Perfect for use without the need for highly skilled personnel, saving time and resources. Reliability: Always ready for use, supporting all operational needs and reducing machine downtime. Cost Optimization: With the TVM 400, you get a durable machine that doesn’t require frequent maintenance interventions. Bdedjv Iqaxjpfx Akaob Advantages: Operator safety ensured by a design aimed at reducing risks. Optimized ergonomics to improve productivity during processing stages. Wear compensation of materials without the need for frequent replacements. Simplified maintenance to reduce costs and increase efficiency. Ready for CURSAL accessories, offering full customization according to production needs. Rationalized cost/quality ratio, making the machine a smart investment. Applications: Production of semi-finished wooden furniture components. Manufacturing of window frames and similar applications. Small-batch production of various types, for specific needs. TVM Ø 500 - The Advanced Solution for High-Volume Production The TVM 500 is one of the most in-demand saws on the market for its ability to handle high-volume production with quality and precision. The optimal cutting section allows for the processing of 90% of squared boards and is perfect for industries that require high performance, such as packaging, construction, and the production of sofa frames and laminated panels. This machine offers maximum flexibility and precision in operations, thanks to advanced features such as: Electropneumatic stops, ideal for cutting stacked boards with repetitive measurements. Numerically controlled stops, for precise measurement management, even in complex processes. Discharge of semi-finished products via transfer systems, discharge tables, or roller conveyors, ensuring smooth and fast material handling. Main Advantages: High productivity for large-volume applications. Versatility in sizes and configurations, adaptable to multiple industries. Operational flexibility supported by advanced accessories. The TVM Ø 500 represents a strategic choice for those seeking a saw capable of meeting the most demanding challenges in the industry, while maintaining high standards of quality and efficiency.

Condition: new, saw blade diameter 550 mm Number of revolutions 3580 r.p.m hole of sawblade 32 mm Control NC total power requirement 3 kW weight of the machine ca. 250 kg Bdsdpsymf Tbefx Akajb required space 980 x 1130 x 1430 mm The Gerd Wolff AC 550 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Schnittbereich 90° rund: 155 mm Schnittbereich 90° quadratisch: 155 x 155 mm Schnittbereich 90° rechteckig: 260 x 200 mm Schnittbereich 45° rund: 130 mm Schnittbereich 45° quadratisch: 130 x 130 mm Schnittbereich 45° rechteckig: 180 x 200 mm Standard Accessories - Location points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air gun Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: new, cutting diameter 570 mm saw band length 7250 x 41 mm cutting width 1,3 mm capacity 90 degrees: square 550 x 550 mm capacity 90 degrees: flat 550 x 700 mm total power requirement 4 kW weight of the machine ca. 6050 kg required space 2600 x 1300 x 3700 m The KLS 550 x 700 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System Bdjdpfx Akjymf Sdeaob - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: used, Sawing machine, automatic saw, automatic cutting machine, Adige CM501 – used machine Bedpfjy Ayc Dsx Akajdb Manufacturer: Adige Model: CM 501 Year: 1996 Blade diameter: 250–360 mm Cutting length: 2100 mm Max. workpiece diameter (round): 85 mm Max. workpiece size (square): 70 × 70 mm The ADIGE CM501 automatic circular sawing machine, manufactured in 1996 in Italy, is designed for fully automatic cutting of solid materials, tubes, and profiles made of steel, brass, aluminium, and other light alloys in industrial production environments.

Condition: used, machine/vehicle number: 007569, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 152 mm Bedpfxsvrrlde Akaodb No of Grippers: 11 Thin sheet loading: yes

Condition: used, Year of construction: 2003, cutting diameter 500 mm Bsdpeyutwqjfx Akaodb saw band length 6990x41x1,3 mm cutting width 860x500 mm cutting speed 15-90 m/min Feed 400 mm/min Rapid movement 2500 mm/min main drive motor 5,5 kW cutting length min. 8 mm total power requirement 8,5 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 3,3x1,2x2,42 m Single lift 3000 mm Multiple lifts possible Optional: Infeed roller conveyor approx. 8 m Outfeed roller conveyor approx. 10 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2005, saw blade diameter 450 mm cutting diameter 150 mm stroke 1300 mm cutting range 140x140 mm Roller conveyor 6000x350 Roller conveyor 4500x700 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Bdjdpfx Ajyutvgokaeb If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2011, functionality: fully functional, power: 3.73 kW (5.07 HP), cutting height (max.): 440 mm, cutting width (max.): 600 mm, pivoting range: 60 °, total height: 1,700 mm, total length: 2,900 mm, total width: 1,300 mm, overall weight: 1,320 kg, Equipment: CE marking, We offer this used semi-automatic band saw TOP-PORĘBA BMT460DSA, year of manufacture 2011. Motor power: 5 HP Cutting diameter at 90° (round cross-section): 460 mm Cutting dimensions at 90° (square): 460 x 460 mm Cutting dimensions at 90° (rectangle): 440 x 600 mm Bdedpfoyv Ai Hex Akaeb Cutting diameter at 45° (round cross-section): 445 mm Cutting dimensions at 45° (square): 445 x 445 mm Cutting diameter at 60° (round cross-section): 295 mm Cutting dimensions at 60° (square): 295 x 295 mm Blade dimensions: 41 x 1.3 x 5330 mm Machine weight: 1320 kg If you have any questions or require additional information, please send us a message or contact us by email.

Year of construction: 2005, condition: good (used), I sell the double mitre saw OMGA TRF 527, year 2005. Cutting length 390 - 2800mm Bodpfx Asg Tumcekaedb Cutting width max. 170mm Cutting height max. 90mm Tilting heads 0 + - 45° 2 Horizontal + 2 Vertical pneumatic Material pressures 2 Motors x 1,62kW (2,2 HP) Good condition. Available immediately.

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Min/Max. cutting length 150mm - 2400mm Max. cutting section at 90° 55 x 100mm Max. cutting section at 45° 40 x 100mm 2 x sawblades dia. 220mm x 30mm bore Motor 1.6hp, 3 phase Bsdpfx Akjdy Hqvjasdb CE Safety requirements

Condition: new, Automatic hopper feeder and loader 1350mm length capacity (longer on request) Adjustable feed stroke- pneumatic / mechanical - standard model Piece positioning device with double pneumatic clamps. 3KW motor with 500mm blade. 2800 rpm. Mechanical blade angling 0 degrees / + / - 60 degrees. Minimum infeed length 200mm / maximum 1350mm. Minimum section 20mm wide x 10mm thick / maximum 200mm wide x 100mm thick Movement / feeding of timber adjustable 1 to 395mm PLC control Maximum production 500 - 800 pieces per hour (depending on length of cut). Pneumatic head stroke. CE safety enclosure. Bsdpen Nv Tiofx Akaedb Overall dimensions 2450mm x 1000 x 1900mm.

Condition: used, Year of construction: 2014, Stromab CT600 Automatic Upstroke Crosscut Saw for Straight and Angled Cutting - 2014 CE 6000mm infeed capacity 2000mm Outfeed table 12" Touch screen graphic display Power 1000 controller Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. 5 optimising criteria - longest size, minimum waste, priority size, by volume or by value. Cutting list entered via controller key pad Graphic description of the workpiece. Bsdpfx Akswl Hyusaodb 10hp motor Rack & pinion drive system for pusher with magnetic reading strip to give a high level of  repeat cutting accuracy 600mm diameter blade CUTTING CAPACITY POSITION A) # max height At 0°: mm. 200x215 or 50x370 At 30°: mm. 200x185 or 50x325 At 45°: mm. 200x150 or 50x265 CUTTING CAPACITY POSITION B) # max. width At 0°: mm. 160x315 or 40x410 At 30°: mm. 160x270 or 40x350 At 45°: mm. 160x220 or 40x285 Angle setting -70 degrees, 0 degrees, + 70 degrees Adjustable saw stroke speed Vertical clamping Horizontal clamping Dust extraction 1 off 100mm, 1 off 120mm. Plexiglass hood with gas springs Year - 2014 CE

Condition: new, Year of construction: 2026, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing Bsdpofww Sqjfx Akasdb of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, sawing system type "ORIX" With the sawing system, a wide variety of aluminum profiles can be processed fully automatically. The machine consists of a stable base. Star guides and precision carriages are used to position the saw unit. The drives are equipped with servo motors. For sawing, the saw unit moves 300 mm forwards on the Y-axis and can easily saw special profiles, panels or Item and Bosch profiles. The support table consists of moveable rollers that are moved to the correct position depending on the section length. All rollers are also mounted on precision carriages. The saw also has a stable storage table on which the sawn-off aluminum parts are placed. (Optionally, the sawn parts can also be transported away directly via a conveyor belt, including the chips). The machine is available with a section length of 6,000 mm. It therefore has a total length of 7,000 mm. The sawing system is delivered with a suitable 2-channel minimum quantity spray system. In addition, the system will be delivered with a 400 or 600 saw blade. Bjdpfefu Tgrex Akasdb

Condition: new, Year of construction: 2026, The fully automatic aluminum circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) was specially developed for cutting profile and solid materials made of cast aluminium, copper and hard plastics. An automatic feed and an automatic cutting movement are ideal for fast and precise series production! The material feed is up to 700 mm with one stroke. Multiple strokes and thus longer sections can be easily entered from the control panel. The main vice clamps the material over two horizontal and two vertical clamping cylinders, the material feed clamps over one horizontal and one vertical clamping cylinder. The cutting and feed speed can be adjusted to suit the material to be cut via the large and clearly arranged control panel! The machine is equipped with a mechanical lifting height adjustment, the maximum cutting height is 100 mm. A large protective hood covers the entire work area and is lifted pneumatically at the push of a button! The UK 350 A 90° CNC + drilling unit comes standard with an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). This has a connection to the cycle control of the aluminum circular saw. Bdjdskqz H Djpfx Akasb

Condition: new, Year of construction: 2026, Aluminium Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminium, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its easy operation and quick, convenient material changes. This model only allows for 90° cuts! The saw feed operates automatically at the press of a button, and material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard features include a minimum quantity lubrication system and an air spray gun for machine cleaning. This machine is equipped with connections for a chip extraction system. Additionally, it can be optionally fitted with a digital mitre angle display, a layout laser, and pneumatic lifting for the protective hood. Equipment: - Large support table, high-performance drive motor - Two-button control for initiating the sawing process (optional single-button control available) - Intuitive control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydro-pneumatic saw blade lifting with oil level indicator - Fixed material back jaw can be moved rearwards to increase cutting capacity - Large protective hood covers the entire working area - Minimum quantity lubrication system with 2-litre reservoir - Adjustable saw blade feed speed - Air gun for machine cleaning - Saw blade diameter: 600 mm Work Sequence: 1. Set the cutting angle 2. Insert the material Bdsdjpa Nxdopfx Akaob 3. Adjust lift speed 4. Bring clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the start button – the machine is ready for operation 7. Press and hold both SAW buttons to initiate cutting 8. After cycle completion, release SAW buttons and press the STOP button 9. Open the clamping fixture and remove or advance the material For technical data such as cutting range, performance, etc., please refer to the data sheet in the email attachment. We look forward to your inquiry! Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Bdsdpfjidun Dox Akaeb Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.