Used Automatic Lathe for sale (27,505)

Condition: excellent (used), Year of construction: 2008, operating hours: 9,000 h, functionality: fully functional, TECHNICAL DETAILS Control: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub-Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools at Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Kledpfx Agsxf Hqqe Uel Number of tools: 6 Tool System Turning tools (12x12x130): 5 Tool holder/parting-off blade (16x12x130): 1 Drilling tools (front): min. 3 Drilling tools (rear): 5 Tool holders, quills (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Collet main/sub-spindle: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specification Required space (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Power supply: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section), - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub-spindle - Main spindle with C-axis - Sub-spindle with C-axis - 3x powered tool rear side machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - FMB Turbo 3-26 bar feeder - Option for long parts - Spindle flushing (Scherzinger pump)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 58,134 h, functionality: fully functional, machine/vehicle number: 25 03 - 01104608, turning length: 330 mm, turning diameter: 33 mm, rotational speed (max.): 8,000 rpm, feed length X-axis: 70 mm, feed length Y-axis: 225 mm, feed length Z-axis: 140 mm, Equipment and axis systems Turrets: 3 units with driven tools Gantry: 1 unit with driven tools C-axes: main and sub spindle with C-axis TECHNICAL DETAILS Turning diameter: 33 mm Turning length: 330 mm Number of axes: 17 Controller: SIEMENS 840D Main Spindle Working area – max. bar capacity: Ø 32 mm Headstock travel: 350 mm Spindle bore: Ø 37.5 mm Spindle drive – AC motor power (100/40%): 8 / 12.5 kW Max. spindle speed: 8,000 rpm Spindle movement: left and right Spindle Feed Max. feed rate: 18 m/min Torque: 10.5 Nm Max. speed: 3,000 rpm Max. thrust: 3,000 daN Turret Heads (3 units) Rotary drive: gear motor Kledpjwm I Ntefx Ag Usl Torque: 25 Nm Hydraulic locking – force: 2,500 daN Number of stations: 8 Tool clamping: VDI 30 Number of rotating tools: 4 Tool speed: 7,500 rpm Drive Motor power (100/40%): 5.5 / 7.5 kW Direction of rotation: left and right C-axis: included Feed Feed rate: 30 m/min Rated torque: 10.5 Nm Max. speed: 1,500 rpm Max. thrust: 3,000 daN Cross-Slide X1 – U1 Number of cross-slides: 1 Cross-slide travel: 70 mm Max. feed rate: 18 m/min Rated motor torque: 6 Nm Max. motor speed: 3,000 rpm Max. thrust: 500 daN Rear Tool Slide Number of slides: 2 U1 Slide travel: 70 mm Y1 Slide travel: 225 mm Max. feed rate: 18 m/min Number of stations: 6 Tool section: 20 x 20 Max. thrust: 500 daN Rated torque: 6 Nm Number of rotating tool holders: 1 / 4 Motor drive: 8,000 rpm Motor torque: 4.2 Nm Max. speed single spindle ER32: 2,000 rpm – 12.6 Nm 1 modular double spindle ER20: 6,000 rpm – 4.2 Nm 1 modular double spindle ER20: 8,000 rpm – 3.2 Nm Cross-Slide Number of slides: 2 X2 cross-slide travel: 140 mm Z2 feed slide travel: 120 mm Max. feed rate: 18 m/min Max. thrust on X2: 500 daN Rated torque: 6 Nm Max. thrust on Z2: 900 daN Rated torque: 10.5 Nm Turret Slide X3 Number of slides: 1 Travel: 80 mm Max. feed rate: 18 m/min Rated motor torque: 6 Nm Max. motor speed: 3,000 rpm Max. thrust: 500 daN MACHINE DETAILS Supply voltage: 3 x 400 V – 50 Hz Total power consumption: 30 kVA Continuous sound pressure level at workplace – machine only: 76 dB(A) Machine Dimensions Machine weight: approx. 6 t Space requirement: approx. 3,850 × 2,000 × 2,100 mm Operating Data Operating hours: 58,134 h EQUIPMENT - Bar loader - Equipment and axis systems - Turrets: 3 units with driven tools - Gantry: 1 unit with driven tools - C-axes: main and sub-spindle with C-axis

Condition: good (used), Year of construction: 2007, operating hours: 27,896 h, functionality: fully functional, machine/vehicle number: 2101-0171, turning diameter: 20 mm, rotational speed (max.): 10,000 rpm, torque: 14 Nm, TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Power: 5.5 kW Torque: 14 Nm Rated torque: 9.4 Nm Speed: 10,000 rpm Axis data Linear axis Z1 / X1 / Z1 – travel: 80 / 35 / 240 mm Kedsw Em Dmspfx Ag Uell Linear axis Z1 / X1 / Z1 – feed rate (max.): 40 m/min Linear axis Z1 / X1 / Z1 – acceleration (max.): 10 m/s² Linear axis Z1 / X1 / Z1 – nominal force: 1,250 N Linear axis Z2 / X2 – travel: 180 / 230 mm Linear axis Z2 / X2 – feed rate (max.): 40 m/min Linear axis Z2 / X2 – acceleration (max.): 10 m/s² Linear axis Z2 / X2 – nominal force: 1,250 N Tool holder Number of fixed tools (internal): 6 Diameter: 20 mm Number of fixed tools (external): 4 Tool shank size: 12 × 12 mm Number of driven tools: 4 Collet type: ESX 16 MACHINE DETAILS CNC control: Fanuc 16iT Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA Power-on time: 85,620 h Operating hours: 27,896 h EQUIPMENT - CNC control: Fanuc 16iT - Bar feeder FMB Turbo 3-36 / 4200 / A, year of manufacture 2007 - Coolant tank with chip conveyor - Centralized lubrication - Handheld control device - Documentation available

Year of construction: 1981, condition: not inspected (used), Feinbau Precision lathe S1-So/KA 40 -WKG 986- Offered here is a fully automatic precision lathe from Feinbau. Kedpshg Nm Refx Ag Uell Technical data: Manufacturer: Feinbau Type: S1- So/KA 40 Year of manufacture: 1981 center height: 134mm Swing over bed: 272mm Max. turning length: 200mm Chuck: Ø 110mm (3jaws) quill feed: 140mm (tailstock) Usage: The machine is suitable for boring or reaming cylindrical turned parts. Accessories: Loading magazine for cylindrical turned parts 28mm Ø 40mm long. loading device Internal cooling device

Year of construction: 1979, condition: not inspected (used), Feinbau lathe, automatic lathe PM1 HUC S -WKG 1269- Offered here is a lathe from the company Feinbau. Technical data: Manufacturer: Scherer-Feinbau Type: PM1-HUC-S Year of manufacture: 1979 Kodpshg Nl Eefx Ag Uell Workpiece holder: hydraulic collet chuck Workpiece ejector: pneumatic cross slide: 100mm feed path longitudinal slide: 80mm feed path feed type: hydraulic type of control: relay control Spindeldrehzahlen: 1400/2000/2800 total power: 4kW weight: 1000kg space requirement: 2000 x 1500mm

Condition: used, functionality: fully functional, Manufacturer: TORNOS Type: DECO 2000/07 Year: 1996 Machine no.: T 62136 Country: Switzerland Specifications: Max. capacity in collet: 7 mm Control: FANUC 16 T-B Hour counter, machine powered on: 24,095 hours Equipped with: Collet clamping device Bar feeder magazine Full C axis Workpiece gripper Tool holders Coolant system Kjdpsxq D Svsfx Ag Usll Operator keys, etc.

Condition: good (used), Year of construction: 1984, Thomann EED 20 Automatic Bar Lathe For square and flat bars Capacity range: 6-20 mm Flat steel: 10/3-30/10 mm Turning length: 25-900 mm Technical specifications Kedpfx Aewbglijg Uell Length: 1200 mm Width: 660 mm Height (without base): 350 mm Height (with base): 1150 mm Weight (without base): 120 kg Voltage: 380 V Motor power: 0.75 kW Rotation speed: 7 rpm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 211S, rotational speed (max.): 3,000 rpm, bar diameter (max.): 65 mm, collet bore: 150 mm, TECHNICAL DETAILS Max. bar capacity: 65 mm Front spindle bearing diameter: 110/150 mm Collet clamping system up to Ø: 60 mm HAINBUCH collet system up to Ø: 65 mm Maximum spindle speed: 3,000 rpm Main spindle motor power: 11/15 kW Main Spindle Number of tools: 8 VDI-30 Maximum working stroke in Z: 50 mm Rapid traverse speed: 15 m/min Feed force: 6,790 N Cross Slide Number of horizontal slides: 2 Maximum working stroke at X1/X2: 70 mm Feed force at X1/X2: 8,000 at 50 bar Maximum working stroke on Z1: 230 mm Turret Number of tools: 8 VDI-20 Vertical Slide Number of vertical slides: 2 Maximum working stroke at X3/X4: 70 mm Manual length adjustment: 50 mm Rapid traverse speed: 15 m/min Feed force at X1/X2: 8,000 at 50 bar MACHINE DETAILS Machine height: 1,700 mm Footprint: 2,900 x 1,700 mm Machine weight: 4,100 kg Kedjwtq U Espfx Ag Uoll Voltage: 380 V Frequency: 50 Hz Power: 22 kVA

Condition: used, Year of construction: 2002, turning diameter 16 mm spindle passage 16 mm turning length 160 mm Klsdpevh I Tvsfx Ag Usl control GE FANUC Series 18 i-T spindle turning speed range 8000 U/min rapid traverse 30 m/min total power requirement 2,2 kW weight of the machine ca. 2,1 t Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm); chip conveyor, coolant

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX total power requirement 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Klodpfsvh Naqex Ag Usl Accessories: various tool holders, various collets, chip conveyor, coolant

Year of construction: 1996, condition: used, Schütte SF 26S DNT YOM 1996 Number of spindles: 6 Max bar diameter [mm]: 26 Auto bar loader: Cucchi BLT Multi-6 - (YOM 2015) Cross slide pos. 1, 3, 4, 6 CN slide pos 2, 5 Spindle stop attachment for main spindles Bar feeding pos. 6 Pickup spindle pos. 6 High pressure coolant system Kedji Hb Szepfx Ag Ujll Chip conveyor, hinged belt type Oil mist filter ISI RON/A 2500A, ID 26295

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Kledpfjin Ub Tex Ag Usl Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Equipment: rotational speed infinitely variable, Citizen C16-VII CNC Swiss Lathe Year of manufacture: 2004 Control: Mitsubishi Meldas 635 Max. machining diameter: 16 mm C-axis: Main and sub-spindle 5 controllable servo axes: X1/Z1/Y1/X2/Z3 Ksdpfxov Rhd He Ag Ujll 4 driven tools on the vertical holder C-axis: Main and sub-spindle Includes accessories: LNS Express 220 loading magazine, 16 mm and 10 mm conversion kit Donaldson Torit extraction system Chip conveyor - Available immediately -

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 320 mm, turning diameter: 32 mm, overall weight: 2,850 kg, Citizen C32-VIII Kodpfewanb Nex Ag Uoll Year 2007 LNS Express 332 Bar Feeder Chip Conveyor Parts Conveyor - Available Now -

Condition: good (used), Year of construction: 1974, 1 x automatic lathe Strohm 125 NAR Year of manufacture: 1974 + bar feeder Iemca Kedpfxjuluqlj Ag Ujll CS 112/31 CT Year of manufacture: 1994 Complete machine in technically perfect condition. The machine can be inspected under power or a video can be provided.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, number of slots in tool magazine: 19, TECHNICAL DETAILS Control: Fanuc, 18i-T series Axis configuration: 7 (X / Z / Y / C1 / X1 / Z1 / C2) Max. bar diameter: 20 mm Max. turning length: 205 mm Spindle data Main spindle speed: 10,000 rpm C-axis indexing: 0.001° Kedsvyrqpepfx Ag Ujll Counter spindle accessories: collet Counter spindle speed: 8,000 rpm C-axis indexing: available Tool configuration Total number of tool holders: 19 pieces Construction: linear tool holder, front attachment, rear machining EQUIPMENT - Integrated extinguishing system from Kraft & Bauer - Chip conveyor and parts conveyor belt - Loading magazine FMB Turbo 3-26/3200 / A (built in 2001)

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0127(009), turning length: 205 mm, spindle speed (max.): 12,000 rpm, turning diameter: 13 mm, drilling capacity: 8 mm, Equipment: documentation/manual, TECHNICAL DETAILS Control system: FANUC 16i-T Number of axes: 9 (X, C1, Y, E, B, A, X, C2) Machining range Max. bar diameter: 13 mm Max. turning length: 205 mm Main spindle Max. speed: 12,000 rpm Spindle power: 2.2 / 3.7 kW C-axis: yes Counter spindle Collet: available Max. speed: 12,000 rpm Spindle power: 2.2 / 3.7 kW C-axis: yes Tool equipment Tool holder: 4-way Cross drilling devices: 3 pieces Drilling capacity: 8 mm Turret: with 8 stations Speed of driven tools: 5,750 rpm Additional tool holders: various available Quills: available MACHINE DETAILS Connected load: 9 kVA Tank capacity: 170 l Coolant: oil Dimensions and weight Machine (L x W x H): 2,700 x 1,400 x 1,700 mm Weight of machine: approx. 1,700 kg Loading magazine (L x W x H): 4,300 x 600 x 1,800 mm Weight of loading magazine: approx. 700 kg Peripherals & accessories (L x W x H): 1,200 x 800 x 1,000 mm Kedsvuza Ajpfx Ag Uell Weight of peripherals & accessories: approx. 200 kg EQUIPMENT - Manuals  - Machine operating tools - Tool holder - Loading magazine FMB Turbo 2-16 (Ø2 - Ø20 mm, length: 3,200 mm, variant "A") - Parts conveyor belt - Extinguishing system Kraft und Bauer - Manuals and operating tools for the machine

Condition: used, Year of construction: 2017, machine/vehicle number: XD-38II-CN-0491-N, Special feature: The machine is equipped with a hydraulic 3-jaw chuck on both the main and pick-up spindles. The machine can be inspected at our premises. MAIN SPINDLE Maximum turning diameter: 25 mm Maximum speed [rpm]: 6,500 Maximum power [kW]: 23 (76 Nm) C-axis with 0.001° Stroke Z1 [mm]: Long lathe version 142 mm, Short lathe version 80 mm Synchronous guide bush unit Type of guide bush: SL38 Type of collet chuck: 173E COUNTER SPINDLE Maximum speed [rpm]: 6,500 Maximum power [kW]: 23 (76 Nm) Maximum pick-up diameter [mm]: 25 Max. part length ejection to the front [mm]: 90 C-axis with 0.001° stroke Z2 [mm]: 280 Type of collet chuck: 171E / 173 E TOOLING OPTIONS Tool slide X1,Y1: - Tool holder plate for 5 external turning tools 16 x 16 mm Cross drilling/milling device: - Quantity: 5 driven ER16 drilling/milling spindles - Power: [kW]: 2.1 (S6000) - Front drilling unit for 5 drilling quills diameter 32 mm Ksdpfxervzdmo Ag Usll Rear machining - Tool carrier for 4 (optionally 6) tools - 2 - 4 driven drilling/milling spindles ER16 modular - 2 - 4 stationary drilling/milling spindles ER16 modular Optional Y2 axis - 4 - 5 driven drilling/milling spindles ER16 modular - 3 - 4 stationary drilling/milling spindles ER16 modular TRAVERSING AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Rapid traverse m/min: 32 m/min (Z1,Z2,Y,X2, Y2) ; 24 m/min (X1) Connected load [kW]: 35 CONTROL Control type: Siemens 828 D SL Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2) Simultaneous 4-axis control External control panel with handwheel 10.4" color monitor LCD/MDI Automatic switch-off function PowerOff Program check function (test run possible via handwheel) Continuous thread cutting cycle Runtime display / parts counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function ACCESSORIES Alignment shoes with leveling elements Tool box and service tool set LED work area light Signal lamp (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8 liter lubricating oil volume) Coolant flow monitoring Pneumatic blow-out device for the pick-up spindle gripper Manual and documentation in German and English

Condition: used, Year of construction: 1995, turning diameter over bed 50 mm spindle passage 26 mm turning length 275 mm total power requirement 12 kW weight of the machine ca. 4500 kg CNC-Sliding Headstock Lathe, Opposite Headstock Kodpet Hwp Tofx Ag Usll

Condition: used, Year of construction: 1990, turning diameter 60 mm turning length 200 mm number of slides total power requirement 20 kW weight of the machine ca. t Klodst Hw Atspfx Ag Usl dimensions of the machine ca. m

Condition: good (used), Year of construction: 2003, Manufacturer: DMG Gildemaster Country of manufacture: Italy CNC control FANUC 16i-TB with 7 axes CE declaration of conformity Technical data - Number of axes: 7 - Number of spindles: 2 Travel paths: X1 axis: ±30 mm Z1 axis: 120 mm Y1 axis: 195 mm X2 axis: 30 mm Z2 axis: 180 mm MAIN SPINDLE - Max. bar diameter: 12 (13) [mm] - Travel path: 120 [mm] - Spindle speed: 12000 [rpm] - Spindle drive power: 3.7 [kW] - Torque: 6Nm COUNTER SPINDLE - Max. bar diameter: 12 (13) [mm] - Spindle speed: 12000 [rpm] - Spindle drive power: 3.7 [kW] - Torque: 6Nm Klsdpfx Asvvx H Neg Usl Driven tools: Power of the tool drives: 1.1 kW Max. speed: 6,000 rpm Bar loading magazine IEMCA SMART 316 Chip conveyor Machine dimensions: approx. 2043 x 1200 x 1750 [mm] Machine weight: approx. 2200 [kg] Spindle, counter spindle with new bearings!

Condition: used, Year of construction: 2008, turning length: 300 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, turning diameter: 32 mm, Machine in production. Equipped with: - Knoll high pressure pumps up to 60 bars - Collant cooling device - swarf coveyour - FMB bar feeder - live tools Kodpfxoxwmide Ag Uell - 2x C axis We can load machine on your truck free of charge.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, You can inspect the machine at our warehouse. Ksdexfr U Uopfx Ag Usll

Condition: not inspected (used), Year of construction: 1994, operating hours: 8,000 h, functionality: unexamined, Machine in good condition Kodjv Im Sdjpfx Ag Usll

Condition: good (used), Year of construction: 1998, Automatic lathe KUMMER Standard Blitz K90 A D, No. B2235, year 1998, control SIEMENS Sinumerik, with chip conveyor Klsdpfx Aeunw Hbeg Ujl 2 identical machines available