Used Automatic Circular Saw for sale (26,289)

Condition: used, 3.7 kW motor Table length 260 cm Working width 100 cm Nwedpfx Asulg Szjarjk With a cutter

Condition: new, Year of construction: 2024, New machine Nsdpfxewb Eh Nj Aarewk Year of manufacture: 2024 Cutting plane directly on the saw blade Large-sized saw unit made of cast iron, double-mounted on the cast iron table – guarantees stability, precision, smooth operation, and long service life; 6-year HOLZKRAFT warranty on wear of the swivel segments Precision-guided format sliding table made of aluminum, anodized as standard 10-year HOLZKRAFT warranty on wear of the sliding table guide rails Parallel fence as standard with round bar guide and fine adjustment Large work table made of milled cast iron Smooth operation and precise cuts Standard table extension and table lengthening enable easy work with larger workpieces Extendable aluminum telescope fence with angle adjustment and two professional folding fences Made in Italy Motor 4.0 kW - 400 V Saw blade tilt 90 - 45° Format sliding table length 1600 mm Table length 1020 mm Table width 325 mm Cutting width with parallel fence 700 mm Max. cutting height 90° = 100 mm Max. cutting height 45° = 79 mm Saw blade diameter 315 mm Saw blade speed 315 mm Max. crosscut width to the left of the saw blade 1660 mm Scoring saw blade diameter 80 mm Scoring saw blade speed 7600 mm Weight: approx. 276 kg Note! The parallel fence and table extension on the right are not visible in the pictures. Availability: short-term Location: Flörsheim

Condition: used, Heavy-duty, high-performance automatic band saw with a horizontally, parallel-traveling saw band, built 2005, for cutting round, square and flat material as well as tubes and profiles in all grades — especially tool steels and hard-to-machine materials (titanium, Hastelloy, Inconel, etc.). Cutting range: round ø430 mm, square/flat H×W 430×430 mm, clamping range 0–430 mm. Saw unit in steel-mineral-cast composite construction with KASTO TrumGuides vibration damping. Saw drive 15.0 kW (14.0 kW at the wheel), connected load 25.0 kW, stepless cutting speed 30–300 m/min, saw feed 0.5–300 mm/min. Automatic NC material feed via ball-screw drive, hydraulic clamping vises on both sides, hydraulically actuated and electronically monitored band tension, self-adjusting chip removal brush, automatic cutting-gap widening and automatic zero-positioning of the first cut. Fitted with a plate belt conveyor and KASTO EasyControl. Delivered WITHOUT infeed magazine — sold without the existing chain magazine. Nedozpb Eqjpfx Aarewk

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Nwsdpfx Ajxtbtpoarek Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder

Condition: good (used), Year of construction: 2008, machine/vehicle number: 21100122-F, Offer 25108 Technical Data: - Saw blade dimensions 350 x 3.4 x 32 mm - Saw blade speed 3400 rpm - Cutting range at 90° round 120 mm Nwsdewq N Swepfx Aarsk - or flat 105 x 105 mm - 180 x 70 mm - at 45° round 110 mm - flat 135 x 60 mm - Bevel adjustable left + right 45 ° - Tiltable bevel adjustment of the saw head for ship cuts left - Pneumatic vises - Discharge – roller conveyor with length stop 2000 mm - Feed – roller conveyor 3000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 600 x H 1730 x D 1200 mm - Weight approx. 180 kg

Condition: used, Year of construction: 2021, saw blade diameter 370x32x3 mm 15-150 U/min vice 190 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180x100 mm 115 mm 90 mm 90x90 mm 115 mm 100 mm 120x100 mm 115 mm 100 mm 120x100 mm total power requirement 5,5 kW weight 615 kg Nsdpjyvvpaefx Aarewk Overall size 1400x1400x2000 mm

Condition: new, Year of construction: 2022, Cutting length: 2500 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 2550 mm Cutting depth: 125 mm Scoring saw: yes Saw blade height adjustment: electric Saw blade swivel adjustment: electric Rip fence adjustment: electric Nedjid Igqjpfx Aarewk Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Crosscut fence display: digital Saw blade diameter: 400 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Dust extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 1000 kg

Condition: as good as new (ex-display), Year of construction: 2025, Sawblade tiltable 0-45 ° Length of the rolling table 3350 mm cutting width 1100 mm Motor output 5,5 kW Cutting height 155 mm Cutting height at 45° 110 mm Saw blade diameter 450 mm Nwsdpfewyd Tujx Aarjk Speed 3000 | 3600 | 4200 U/min.

Condition: used, Year of construction: 2007, 410 mm 430x410 mm capacity 90 degrees: round 410 mm capacity 90 degrees: flat 700x410 mm 410 mm 500x410 mm 320 mm 320x410 mm dimensions of saw-band 5800x41x1,3 mm total power requirement 5,5 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. 3500x2800x2000 mm Nwodpfxsztft Tj Aarsk

Condition: used, Year of construction: 2007, cutting diameter 330 mm saw band length 4115 mm cutting width 0,9 mm main drive motor 3,7 kW Roller conveyor length 5000 mm Roller conveyor width 700 mm roll diameter - bore 150 mm total power requirement 13 KVA Nodpfx Aaszfqhmerjwk weight of the machine ca. 1,8 t Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Aluminum circular saw, miter saw, glass bead saw, aluminum saw, underfloor aluminum miter saw machine Nsdpfx Aaecmtnmjrswk -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 350 mm -Drive: kW -Speed: 900/1700 rpm -Dimensions: 900/520/H1280 mm -Weight: 150 kg

Year of construction: 1983, condition: used, Aluminum miter saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw Nedpfed Ixn Rex Aarowk -Saw blade diameter: 355 mm -Speeds: 1420/2880 rpm -Drive: 3.7/4.5 kW -with: coolant device -Dimensions: 990/1140/H1535 mm -Weight: 596 kg

Condition: good (used), Year of construction: 2000, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, underfloor saw, aluminum circular saw, semi-automatic aluminum circular saw, chop saw, glass bead saw -Manufacturer: Kaltenbach, Cold circular saw, metal circular saw with roller conveyor left/right -Type: KKS 400 E Semi-automatic without material feed -Saw blade: Diameter 400 mm -Drive power: 1.8 / 2.7 kW -Cutting area at 90 degrees flat: 305 x 20 mm / round Ø 130 mm -Cutting area at 45 degrees flat: 245 x 30 mm / round Ø 130 mm -Cutting range for square bars: 90° 120 mm / 45° 110 mm -Miter: swivels on both sides -Cutting speed: 13/26 m/min. -Saw blade feed speed: infinitely variable 0 - 1000 mm/min -Roller conveyor left: total 4000/345/H1000 mm -Roller conveyor right: total 6000/345/H1000 mm Njdpfx Aajx Sdpyjrswk -Saw dimensions: 1150/930/H1765 mm -Overall dimensions: 10810/1150/H1765 mm -Total weight: 1190 kg

Condition: good (used), Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, cold circular saw metal circular saw type TRL 300 pivoting on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 315 mm -Cutting area at 90 degrees flat: 110 x 70 mm Nwedpfsxlzytsx Aarok -Cutting range at 45 degrees: 100 mm -Accessories: incl.2 saw blades, see photos -Dimensions: 1230/630/H1800 mm -Weight: 273 kg

Condition: good (used), Year of construction: 2007, MACO KS425A Undercutting Circular Saw / Cold Cutting Saw, year of manufacture 2007, with hydraulic clamping system. Technical data: Manufacturer: MACO Model: KS425A Year of manufacture: 2007 Saw blade diameter: 425 mm Max. cutting height: 145 mm Saw motor: 1.3 / 2.6 kW Motor speed, saw head: 700 / 1400 rpm Hydraulic unit: 0.75 kW Coolant tank: 70 liters Nwsdpezfwu Tjfx Aarsk Hydraulic tank: 40 liters Machine weight: approx. 845 kg Dimensions (W x H x D): approx. 1160 x 1730 x 1750 mm Hydraulic clamping device

Year of construction: 1998, condition: ready for operation (used), Feed rate: 50-1000 mm/min, operating voltage: 3x 400 V, control voltage: 24 V, rated current: 12 A. On-site viewing is possible. Nwedpfxeyln A Nj Aarjk

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above Nedpoxabztjfx Aarjwk consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: used, Year of construction: 2008, cutting diameter 1500 mm saw band length 15050 mm cutting width 2000 mm total power requirement 45 kW weight of the machine ca. 43.500 kg required space 3862 x 2110 mm FRIGGI 2MF GANTRY 1500 x 2000 x 9000 Manufacturer: FRIGGI S.r.l. Address: Via Vitt. Veneto 13, 20086 Motta Visconti (MI), Italy Model: 2MF GANTRY Type / Version: 1500 x 2000 x 9000 Serial Number: 3610 Year of Manufacture: 2009 Weight: 43500 kg CUTTING CAPACITY Rectangular Profile: 1500 x 2000 mm Round Profile: Ø 1500 mm Gantry Stroke: 9600 mm SAW BLADE Band Dimensions: 80 x 1.6 mm Max. Band Length: 15050 mm Band Speed: 10 – 120 m/min DRIVES Band Motor Power: 18.5 kW Bow Motor Torque: 12 Nm Gantry Motor Power: 2 x 12 Nm Flywheel Diameter: 2x 1200 mm + 2x 620 mm Nwodozk Rh Ropfx Aarsk HYDRAULICS Hydraulic Tank Capacity: 120 Liters Hydraulic Pump Flow Rate: 23 l/min Hydraulic Pump Motor Power: 4 kW ELECTRICAL DATA Installed Power: 45 kW Supply Voltage: 400 V Max. Current Draw: 80 A Frequency: 50 Hz Power Factor: 0.8 COLOR Structure Color: RAL 7039 Flywheel Covers Color: RAL 7021 Moving Parts Color: RAL 2004 TYPE PLATE / CE DECLARATION CE Marking: Yes (Directive 98/37/EC etc.) CE Declaration Date: 19.03.2009

Condition: used, Year of construction: 2008, cutting diameter / mm saw band length / mm cutting width / mm including roller conveyor 4000 x 500 x 850 mm Sawing diameter (round): 260 mm Sawing diameter (square): 260 mm Sawing diameter (rectangular): 300 x 260 mm Njdpswm Rqtsfx Aarjwk Saw blade dimensions: 4200 x 34 x 1.1 mm High-performance band saw automatic machine, heavy-duty hydraulic production band saw Parallel sawing feed system in profile guide rails Mitsubishi NC program control E1032 for preselection of 90 sets, each with a specific quantity and corresponding cut length PLC control Mitsubishi With Siko incremental encoder Material feed with ball screw spindle 950 mm in one stroke, any desired cut length from 3 mm – 9999 mm Hydraulic material clamping with long-stroke cylinder, opening on both sides Material clamping with double vice in front of and behind the saw blade Remaining piece length in automatic mode: 90 mm Max. cutting length in automatic mode: unlimited Material support height: 850 mm Net weight: 2300 kg Dimensions W x H x D mm: 2580 x 2000 x 2000

Condition: used, Year of construction: 2025, Second-hand machine Year of manufacture: 2025 Condition: as new, delivered in December 2025 Features and technical specifications: Solid worktable made of heavily ribbed grey cast iron for maximum stability and durability robust base frame made of welded steel – guarantees high torsional rigidity and vibration-free operation Precision sliding crosscut table made of anodised aluminium – guided smoothly via high-quality Ball-contact system Carbide guideways – for lasting precision and minimal maintenance swivelling grey cast iron saw unit with double segment guide – precise zero-point swivelling for maximum cutting accuracy Solid rip fence with round bar guide Njdpfxezk N Txe Aarswk Fitted with a sliding eccentric clamping device Integrated angle cutting device on the sliding carriage – for fast and precise mitre cuts Scoring unit with belt drive Sliding carriage length 2600 mm Trimming length 2600 mm Sliding carriage width 360 mm Table length 940 mm Table width 560 mm Cutting width with rip fence: 900 mm Max. cutting width to the left of the saw blade: 3200 mm Saw blade tilt 90–46° Max. cutting height at 90° = 100 mm Max. cutting height at 45° = 71 mm Saw blade diameter 315 mm Speed 4,000 rpm Scoring blade diameter: 120 mm Speed of scoring saw blade: 9,000 rpm Motor 6 kW Weight approx. 560 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1996, saw blade diameter 300 mm cutting diameter 100 mm capacity 45 degrees: flat 105 x 80 mm capacity 45 degrees: round 100 mm capacity 60 degrees: flat 80 x 70 mm capacity 60 degrees: round 90,0 mm dimensions of saw-blade 300 x 2,5 x 40 mm hole of sawblade 40,0 mm stroke 150 mm cutting speed 17 + 33 U/min voltage 400 V Nedpfx Aajzl E Twjrjwk weight 340 kg range L-W-H 1000 x 800 x 1600 mm Features: - Machine cabinet with built-in coolant system - Vertical saw head guide - 2 speeds - Very large work surface and turntable - Mitre adjustment on both sides: 60° to the left / 45° to the right - Clamping vise with lateral quick-adjustment and double clamping arm - Precise prism guide for the gear head - Operatorâ??s manual

Condition: used, Year of construction: 2002, with CNC parallel fence Machine in working order, completely set up used good condition cleaned functionally tested partially refurbished top equipment Manufacturer: Altendorf Type: F45 Elmo CE Year of manufacture: 2002 Machine no.: GS tested CE type-tested Nodpfx Aozkvy Sjarswk GS dust-tested Motor kW: 5.5 Steel guides Adjustable parallelogram guard Control panel swivels upwards Parallel fence with automatic control Aluminum parts anodized Height adjustment, electric Swivel adjustment, electric Position control 3 axes Digital display for height Digital display for cutting angle Digital display for parallel fence Speed: x Laser cutting line indicator Table length mm approx.: 3000 mm Cutting width mm approx.: 1000 mm Cutting length mm approx.: 2905 mm Cutting height mm approx.: 150 Max. blade diameter mm: 450 Swivel up to °: 45.5 Table extension mm approx.: 840 mm Dust extraction connection mm: 120 / 80 Space required approx. L x W x H mm: 3000x4200x1800 Weight approx. kg: 1000 Total connection value approx. kW: 6.25 Kw Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty

Condition: used, cutting width 90°: 410 / 45°:290 mm Cutting height 170 mm Cutting height at 45° 115 mm saw blade diameter 420 mm machine weight ab. 150 kg Saw blade 40 mm saw blade turning speeds 3350 U/min Nwsdpoy Ihauefx Aarok

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 150 mm, cutting width (max.): 1,000 mm, cutting length (max.): 3,200 mm, table length: 3,200 mm, Basic Configuration - Electrically powered height and tilt adjustment 0-46° for the main saw blade with automatic correction of the cutting height when tilting the saw unit - Control panel at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Parallel fence, manual adjustment via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Angle fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Max. saw blade projection 154 mm, max. saw blade diameter 450 mm - Drive power 5.5 kW (7.5 HP) with three speeds (3,000/4,000/5,000 rpm) - AKE tool clamping system for the main saw blade - Working height 91 cm Control System - Electrically powered height and tilt adjustment, also on both sides (+/- 46°)*, for the main saw blade with automatic height correction and digital displays - Electrically powered adjustment of the parallel fence* - Electrically powered adjustment of the CNC miter fence UNO 90* - Automatic size correction on the parallel fence and angle fence when tilting the saw unit - Digital speed display or stepless speed control (VARIO)* - Electrically powered adjustment of the scoring unit, two or three axes* - Stepless fine adjustment of the axes via +/- buttons - Control of vacuum clamping in the double roller carriage* - Easy axis calibration - Machine diagnostics - Operating hours counter - USB interface - Recall of the last dimension entered (back function) Nwsdpfx Ajxuqulearsk - 99 storable cutting programs - Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete - Automatic conversion from peak to blunt measurement on the parallel fence and angle fence, taking material thickness and tilt angle into account - Compound angle cut function with automatic calculation of missing angles or dimensions - Advanced tool management · Storage of the scorer position (3-axis scorer)* · Saving of main blade thickness and cutting width · Saving of main tool speed · Max. 100 storable tools - Additional functions · Grooving: with automatic stepwise positioning of the parallel fence until the groove is complete · Chain dimension function: cutting sequences with identical distances on the parallel fence, calculated on both sides of the saw blade · Angle cut: by trimming the oversize, the desired finished size is produced after entering the edge angle · 999 storable cutting programs *optional accessories The following options are included: - Pattern holder - Extended cutting height incl. tilting - Motor 5.5 kW (7.5 HP) VARIO - 2-axis scorer unit - LED lighting - Double roller carriage with a length of 3,200 mm - On/Off switch on double roller carriage - Digital miter fence Digit L - CNC parallel fence 1,300 mm - Front support roller - Duplex 1350

Condition: used, Year of construction: 2007, cutting height (max.): 1,060 mm, cutting width (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Nwjdpswk D Efofx Aarjk Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals