Used Automated Lines for sale (22,014)

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, Complete pellet production line, consisting of: Wood chip feed hopper 8m³ Hammer mill 22 kW Chip bunker with 3 discharge openings Gjdpjy Ayiwsfx Acmjkd Screw conveyor with dosing unit (binder) Walw pellet press Conveyor belt Pellet cooling bunker with packaging unit and fine particle screening

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Gkodsz D S Sbepfx Acmsd Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: used, Year of construction: 2017, Overview Complete dressing line for sparkling wine in 750 ml glass bottles, rated at 5,000 bottles/h. The line runs from bottle washing and drying through capsuling and labelling to tray forming, wrap-around packing and vertical packing, linked by approximately 50 m of bottle conveyors, tray conveyors and two accumulation tables. The labelling machine dates from 2017, the packaging end from 2002 and the bottle washer-dryer from 2005. The line is still in production and can be visited on request. Technical data Gsdoz Dtymspfx Acmekd - Year of manufacture: 2017 (labelling machine); remaining machines 2002 to 2005 - Output: 5,000 bottles/h - Product: sparkling wine - Bottles: glass, 750 ml - Bottle conveyors: approx. 50 m total length - Accumulation tables: 2 - Electrical cabinet with power supply and automation included Scope of Delivery - Bottle washer and dryer | CAMES | WDT-12 | 2005 - Capsuling machine | Robino & Galandrino | ZENITH Z 2/16 OTTICO | 2004 - Labelling machine | Sacmi | KUBE K60 | 2017 - Tray former | CERMEX | F28.40 | 2002 - Tray former | CERMEX | F28.40 | 2002 - Bottle deviator | CERMEX | 2002 - Vertical packer | CERMEX | AN90 | 2002 - Wrap-around packer | CERMEX | WB45.00 | 2002 - Laser coder | LINX | SL301 - Hot-melt unit | Nordson - Bottle conveyors | Bobard, Thierion, Anduze | approx. 50 m total length | 2017 - Tray conveyors - 2 accumulation tables - Electrical cabinet with power supply and automation Condition In production. Inspection on site by appointment. Availability Available from 29 January 2027. Location: France.

Condition: used, Year of construction: 2022, Overview Complete PET bottling line for still mineral water in 6.0 L PET bottles with handle, max. 6,000 bottles/h. The heart of the line is an SMI ECOBLOC ERGON blow moulder-filler-capper combiblock, followed by handle application, rotary labelling and robot palletizing. Built in 2022, started up in 2023 and run only 3 to 4 times a year. Technical data - Year of manufacture: 2022, start-up 2023 - Capacity: max. 6,000 bottles/h - Product: still mineral water - Container: 6.0 L PET bottle, single bottle with handle and EAN barcode - Preform: 100% rPET, 86.5 g - Closure: 48/41 cap - Pallet: Euro pallet Scope of Delivery - Blow moulder-filler-capper combiblock | SMI | ECOBLOC ERGON 6-20-5 HC EV | blow moulder for 6 moulds (moulds not included), filler with 20 filling valves, capper with 5 capping heads, cap sorter and cap elevator | 2022 - Discharge conveyor | SMI | bottle conveying from the combiblock | 2022 - Accumulation table | SMI | FIFO | for filled bottles | 2022 - Bottle divider | SMI | DV 500S ERGON | 1 lane in, 2 lanes out | 2022 - Drying tunnel | EUROPOOL | before the handle applicator | 2022 - Handle applicator | TWINPACK | double lane, with barcode applicator | 2022 - Drying tunnel | EUROPOOL | before the labelling machine | 2022 - Bottle combiner | SMI | 2 lanes in, 1 lane out | 2022 - Conveyor | SMI | from the accumulation table to the labelling machine | 2022 - Rotary labelling machine | P.E. LABELLERS | ROLLMATIC MODULAR TOP SL 960 10T | 2022 - Conveyor | SMI | from the labelling machine to the palletizer | 2022 - Palletizer | BEMA | 2 FANUC robots, interlayer device | 2022 - Electrical panels | main distribution panels with all components for all machines and conveyors | 2022 - Format parts and spare parts | all available format and spare parts Not included Pressco preform and neck inspection, Heuft fill-level and cap inspection, pallet wrapper, preform and cap feeding from the pallet tipper to the hoppers, high-pressure compressor for the blow moulder, low-pressure compressors, utilities, piping and wiring from the main distribution to the machine panels, civil works. Condition As-new condition, low operating hours. Annual preventive maintenance by the OEMs plus regular in-house maintenance. In production until the end of April 2026 and still installed; dry run on request, inspection by appointment. Electrical and mechanical drawings, PLC programs with backups, service and maintenance manuals and spare parts books are included. Availability Gedpoz Ag U Dsfx Acmjkd From October 2026; the line must be dismantled by the end of October 2026. Dismantling, packing and truck loading can be arranged on request. Location: France.

Condition: good (used), functionality: fully functional, AMF Bakery Tromp puff pastry line direct from major factory. Has been producing 2 tonnes per hour of 90-100 layer puff pastry. Other machinery available from the same line including 2 x Syspal bowl tippers (2024), 2 x Diosna WV240 A Premium wendel mixers (stainless steel model), 2 x Siloba 75 tonne flour silos, 2 x Siloba flour stations. All being removed at the end of August '26. Gkjdpfozumifsx Acmjd

Condition: used, Year of construction: 2015, Biesse Uniline 4500 CNC processing center (i.e. for window & door frames) Description Biesse Uniline 4500 Machine nr; 1000004833 Year of construction: 2015 Machining lengths: 175 - 4,500 mm Number of milling motors: 1 Motor power: 19.2KW (25.7HP) Label printer: No Tool holder: HSK 63F Changer type: Fixed + movable Number of positions in toolchanger: Flexstore total 44 Software: BiesseWorks Office licenses: 1 x Fencing: Yes complete Extra The machine has a MULTIFUNCTION UNIT EQUIPPED with a drilling unit with four tool outputs. Gkedpszp Hbqefx Acmjd This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER25 recordings, speed 5,000 rpm. (If this drilling unit is also to be used for sloping frames, only two exits (opposite each other) are used). The machine also has a MULTIFUNCTION UNIT EQUIPPED with a mortising unit with two tool outlets. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER32 recordings, speed 16,000 rpm. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Gjdpfx Ajzvgdlecmjkd Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Year of construction: 1988, condition: used, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² Gksdpfx Aobicz Hscmod coil weight max. 4 t coil-dia max. 1.500 mm

Condition: used, Year of construction: 2005, machine/vehicle number: LC688, Used Tetra Pak A3 Flex 1000 SQ filling line 7000 PPHTechnical Specifications & Performance DataThis used Tetra Pak A3 FLEX 1000SQ filling line is designed for industrial packaging and beverage production in carton packages. The main filling machine was manufactured in 2005 and is configured for the 1000SQ format, with a production capacity of 7000 packages per hour. The filler has been upgraded from 100V to 300V.Main filling machine: Tetra Pak A3 FLEXMain format: 1000SQAdditional format capability: 500SQ through a quick change kitProduction capacity: 7.000 packages per hourIncluded accessories: 2 paper reels and 1 paper trolleyAdvanced Automation & Control SystemsThe line is arranged as an integrated carton filling and packaging system. Its format-specific configuration supports coordinated operation between the filler, cap applicator, accumulation equipment and cardboard packing section. The A3 FLEX filler upgrade from 100V to 300V is part of the documented machine configuration.Production Line Integration CapabilitiesThis complete bottling line is configured for carton-package production, with equipment supporting filling, cap application, product accumulation and secondary cardboard packing. The 1000SQ format is the principal operating format, while the supplied quick change kit supports conversion to 500SQ. The ACHX30-50M accumulator is suitable for both 1000SQ and 500SQ formats, helping maintain flow between filling and downstream packaging operations.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3 FLEX2005Capping MachineTetra Pak CAP30 FLEX2013Various EquipmentTetra Pak ACHX30-50M2015Case PackerTetra Pak CBP322008Various EquipmentPaper Reel TrolleyMachine Condition & Maintenance HistoryThe equipment is identified as used. The documented line includes components manufactured between 2005 and 2015, including the main A3 FLEX filler, the ACHX30-50M accumulator, the CAP30 FLEX cap applicator and the CBP32 cardboard packer. Used bottling line buyers can assess the individual machine configuration, installed formats and supplied accessories when planning recommissioning and integration.Operational Performance & VersatilityThe line is suited to carton filling applications requiring a 1000SQ package format and can be adapted for 500SQ operation with the included quick change kit. The C... Gkedpfx Aj Adttmjcmjd

Year of construction: 1987, condition: used, machine/vehicle number: LC609, Used AMENDUNI complete oil prodaction line 20 qlhTechnical Specifications & Performance DataThis complete continuous-cycle olive oil line is engineered for efficient, high-throughput extraction with integrated handling, crushing, malaxing, separation, and decantation. Manufactured by AMENDUNI, it provides a robust platform for second hand industrial packaging and food processing environments, supporting seamless integration with downstream bottling and industrial packaging operations for edible oils.Operating mode: Continuous-cycle olive oil extraction lineManufacturer: AMENDUNIYear: 1987Throughput: Up to 20 quintals per hour (approx. 2,000 kg/h)Included equipment: olives conveyor, leaf remover, stainless steel hopper, screw conveyors, hammer crusher, 4 stainless steel malaxers, 2 paste pumps, 2 decanter centrifuges, pomace screw conveyor, 4 stainless steel decantation tanks, separators, complete electrical panel, pomace-fired boilerConstruction: Stainless steel on key product-contact units (malaxers, hopper, decantation tanks)Use case: Olive oil extraction and clarification prior to bottling/packagingAdvanced Automation & Control SystemsThe line includes a complete electrical panel designed for centralized control of core processes such as crushing, malaxing, paste transfer, decanting, and separation. The control architecture supports safe equipment interlocks and coordinated start/stop sequences across devices, improving uptime and process consistency. Temperature control of malaxers, motor protection, and emergency circuits are managed through the main panel for dependable production. Quick access to drives and instrumentation simplifies routine checks and adjustments during campaign operations.Production Line Integration CapabilitiesThis system manages the primary extraction workflow, integrating seamlessly with fruit reception and washing units. Its modular design ensures a fluid transition from raw fruit to high-quality oil, focusing entirely on the mechanical transformation process. Engineered for industrial efficiency, the system delivers finished oil ready for bulk storage or filtration through a streamlined, high-performance infrastructure.Inline or semi-standalone operation for each individual processing stage.Steady and controlled transfers between units via high-efficiency pumps and screw conveyors.Layout adaptability to suit diverse facility footprints and storage configurations (tank farms).Optimized for edible oil workflows leading directly to bulk storage or filtration stages.Machine Condition & Maintenance HistoryThe installation is complete and reported as functional, with all major components included. It is currently stopped, offering a solid candidate for recommissioning. The comprehensive equipment list reduces the need for sourcing auxiliary machines and supports a coordinated restart plan.Operational Performance & VersatilityDesigned for continuous processing, the line stabilizes paste quality via controlled malaxing an... Gsdpfx Acj Adt Dromskd

Condition: used, machine/vehicle number: LC610, Used continuous flow oil extraction lineTechnical Specifications & Performance DataThis complete olive oil processing line is engineered for continuous operation and dependable seasonal throughput. Built around continuous-cycle technology, it combines crushing, malaxing, separation, and filtration with pneumatic management to deliver stable, high-quality olive oil ready for downstream industrial packaging and bottling.Production capacity: about 20 ql/h (expandable by upgrading pumps)Line configuration: 2 continuous-cycle linesPrimary equipment: crusher with variable speed and gear pump group, malaxers (5 ql and 7 ql units), centrifuges, stone mill, filters with trays, gear pumps, water pumps, sorter with belts and hoppersCentrifuges: 2 units, 7–8 ql/h eachMalaxers: 5 units x 5 ql; 4 units x 7 qlFilters: 2 units with 4 traysStone mill: 1 unit, 7 qlControl medium: compressed air for actuation and controlDischarge control: electronic management on crusher/pump groupManufacturer: Vitone engineeringAdvanced Automation & Control SystemsThe line leverages pneumatic actuation for reliable, low-maintenance operation and features electronic discharge management on the crusher and gear pump group for precise process control. Variable speed on the crusher enables optimal paste preparation across different olive varieties and crop conditions. Modular sections facilitate line balancing and fine adjustments during peak harvest periods.Electronic discharge management for consistent flowVariable-speed crushing for paste optimizationPneumatic controls for actuators and key mechanismsModular sections to match upstream reception and downstream filtrationProduction Line Integration CapabilitiesDesigned for seamless integration within an olive oil extraction plant, the system connects upstream fruit handling with malaxing, separation, and finishing. Downstream, it interfaces effectively with used bottling line equipment and industrial packaging solutions for edible oil, enabling a smooth transition from extraction to filling, capping, and labeling where required.Inline operation across crushing, malaxing, centrifugation, and filtrationEasy tie-in to downstream oil bottling and labeling systemsCapacity scalable by upgrading pump sectionsSorter with belts and hoppers supports steady, uniform feedMachine Condition & Maintenance HistoryThe plant is kept in regular working order with scheduled annual maintenance. It operates every harvest season, ensuring components remain exercised and service-ready. The consistent upkeep reflects a practical, second hand asset that remains fully functional and dependable for ongoing production.Operational status: in production during harvest seasonsMaintenance: routine annual service performedCondition: ready to support continuous-cycle extractionOperational Performance & Versatility Gksdpfs Adt D Ejx Acmed

Condition: used, Year of construction: 2002, machine/vehicle number: LC698, Used AVE monoblock 1-75-24 filling line 30000 BPH - Year 2002Technical Specifications & Performance DataThis used bottling line is designed for high-speed handling, filling, capping, inspection and secondary packaging of PET and glass bottles. The declared maximum line speed is 500 bpm, while individual equipment is rated up to 900 bpm in bottle handling sections and 800 bpm through the filling, capping and inspection stages.Declared maximum line speed: 500 bpmContainer handling: PET and glass bottlesFormats: Mignon 50ml Filling monoblock: AVE Monoblock 1/75/24 with 75 valves, rated at 800 bpmPrimary capping equipment includes Zalkin and Fowler cappersSecondary packaging includes shrink wrapping, bundle labeling, case forming, glue application, checkweighing and case turningMachine years represented in the line range from 1984 to 2020Advanced Automation & Control SystemsThe line combines dedicated bottle handling, cap handling, filling, closure inspection and reject systems to support controlled beverage production. Inspection equipment includes a Heuft Basic BA-R20 unit for bottle-cap and low/high fill-level inspection, followed by a Heuft pusher rejection unit.Available electrical data includes a Lanfranchi bottle unscrambler rated at 400 V, 60 Hz and 4 kW. The Tekkra shrink wrapper is rated at 480 V, 60 Hz, 102 A and 3-phase power. The Pearson case former is rated at 460 V, 60 Hz, 3-phase power, 3 KVA and 15 A. The Thermo Scientific Versa checkweigher operates on 120 VAC, 50/60 Hz, single-phase power.Production Line Integration CapabilitiesThe complete bottling line is arranged for bottle preparation, filling, capping, inspection and downstream industrial packaging. Bottle unscrambling, dumping and merging equipment supports PET and glass bottle flow, while cap elevators, cap conveyors and cap sorters provide closure handling upstream of the capping stations.Machine typeManufacturer / modelYearVarious EquipmentDumpers Unlimited Bottle Unloader2017Various EquipmentLanfranchi .24.58 Bottle Unscrambler2003Various EquipmentHartness Bottle Dumper2004Various EquipmentLanfranchi Merger2018Various EquipmentPerrier MFL. 60 / MFG 60 Cleaner1984Filling MonoblockAVE Monoblock 1/75/24 Gksdpfx Acj Ad Rixsmjd

Condition: used, Year of construction: 2018, operating hours: 8,000 h, machine/vehicle number: LC641, Used GEA Procomac Aseptic filling line 48000 BPHTechnical Specifications & Performance DataThis used bottling line is a high-performance aseptic PET solution engineered by GEA Procomac for industrial packaging and beverage production. Designed for second hand acquisition without sacrificing technical integrity, the line delivers a rated capacity of 48,000 BPH with dry aseptic technology and integrated fruit-piece dosing capability.Rated capacity: 48,000 BPHAseptic method: Dry asepticContainer format: 0.23L (two different molds)Bottle neck & cap: 38mm neck, double-layer 38mm capBlower: SIPA, 24 cavitiesFiller: GEA Procomac Fillstar FX isobaric filler, 84 valvesFruit-piece dosing: 24 valvesCapper: 24 nozzlesGas unit: None (suitable for low-acid and neutral products)Operating hours: 8000Year of manufacture: 2018Downstream speeds: Dual 24,000 BPH modules on key packaging operationsKey models/codes: Fillstar FX; outer-cap machine model NYG18H-00Advanced Automation & Control SystemsThe line integrates advanced aseptic handling and in-line quality control. Preform sterilization, cap feeding and sterilization, and H2O2 injection are automated to maintain hygienic integrity. Optical and X-ray inspection systems monitor critical control points with reject mechanisms for non-conforming containers. A dedicated aseptic water and CIP unit supports repeatable sanitation cycles and short changeover times. Automated components are engineered for consistent performance in high-speed production environments.Production Line Integration CapabilitiesConfigured as a complete production line for PET bottles, the system combines container handling, filling, labeling, secondary packaging, and palletizing. It includes a 24-cavity SIPA blower, GEA Procomac isobaric filler, fruit-piece dosing, sleeve and neck labeling, shrink wrapping, carton packing with industrial robots, accumulation buffering, and palletizing. Format flexibility includes 0.23L with two mold sets and 38mm neck finish. The modular layout supports synchronization across conveyors and buffering for continuous operation.Machine Condition & Maintenance HistoryThe line is still on power and reported in very good condition. Operating hours are approximately 8000. Manuals are available to support installation, operation, and maintenance. The equipment set is recent (predominantly 2018), with select processing assets from 2007 and 2019 included, indicating a professionally maintained and upgraded system.Operational Performance & VersatilityOptimized for low-acid and neutral product aseptic bottling, the configuration is suitable for premium beverage production requiring sterile conditions and gentle handling—especially products containing fruit pieces. Processing assets include tubular pasteurizers, UHT capability, homogenization, deaeration, and aseptic tanks, supporting robust beverage preparation workflows. Dual 24,000 BPH downstream modules help ba... Gjdpfxo Ady Dxe Acmjkd

Condition: used, Interroll roller conveyor, 0.99 m, with drive The Interroll roller conveyor element is in very good condition. Furthermore, the roller conveyor has its own drive motor. Width: 400 mm Length: 990 mm Complete factory closure sale, Godpfx Aehvmi Tecmjkd large selection of storage racking, pallet racking, shelving, and paternosters. High-quality industrial machines, lathes, grinding machines, and hand tools. More items – new and used – can be found in our shop! International shipping costs available upon request!

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam Gedpjhzbipsfx Acmjkd - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: reconditioned (used), Year of construction: 1996, No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter No. 1 type K –HS- Y sieve/Mesh 176 mm incl. Hydraulic Pack Gkedpfx Acogbffvjmsd 1x Melt-Pump with motor 22 kW 1x Melt-Filter No. 2 type K-SWE 180 RS back-flush self-cleaning 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, > find our most-recent stock-list online on our homepage.

Year of construction: 2020, operating hours: 10,000 h, condition: excellent (used), functionality: unexamined, FFP1,FFP2,FFP3,Carbon Layer Available Cup type, C type, Duckbill type, Flat-Fold type. FFP2 masks are suitable for filtering out at least 94% of airborne particles, including dust, smoke, aerosols, and droplets. They protect against hazardous materials up to 10 times the workplace exposure limit. Gkodpsza E Raofx Acmed They are widely used across several settings: Healthcare: Protecting wearers against airborne viruses, bacteria, and pathogens (such as influenza and COVID-19). Construction & DIY: Safeguarding lungs from hazardous dusts generated by drilling, masonry work, plastering, sanding, and handling loft insulation. Industry: Filtering oil and water-based mists, as well as dusts found in woodworking, agriculture, and waste management. An FFP3 mask (Filtering Facepiece 3) is a high-grade respirator used to protect against hazardous airborne substances. It filters at least 99% of airborne particles and is essential in environments with high concentrations of toxic dusts, aerosols, and pathogens.

Condition: used, Year of construction: 2004, operating hours: 51,870 h, machine/vehicle number: LC692, Used Tetra Pak TBA19 200 slim V020 line, 7500 PPHTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak TBA 19 200 Slim V020 aseptic carton filling line for industrial packaging and juice beverage production. Manufactured in 2004, the line is configured for the 200 Slim carton format and includes a straw applicator for complete retail-ready package preparation.Manufacturer: Tetra PakModel: TBA 19 200 Slim V020Year: 2004Production speed: 7,500Package format: 200 SlimProcessed product: JuiceOperating hours: 51,870Included equipment: Straw applicatorAdvanced Automation & Control SystemsThe TBA 19 platform is designed for automated carton handling, forming, filling and sealing within a continuous beverage production process. The line is supplied with its complete paper documentation, supporting operation, service activities and technical reference. Electrical configuration and installed power follow the standard European TBA 19 line arrangement.The integrated straw applicator supports automated application of drinking straws to compatible 200 Slim cartons, helping prepare finished packs for downstream industrial packaging operations.Production Line Integration CapabilitiesThis second hand Tetra Pak carton filling line is suited to integration with upstream juice preparation and product supply systems, as well as downstream carton conveying, accumulation and secondary packaging equipment. It is configured as a compact filling and pack-completion solution for 200 Slim juice cartons.Machine type/categoryManufacturer/modelYearFilling MachineTetra Pak TBA 19 200 Slim V0202004Various EquipmentStraw applicatorMachines of this type typically operate as part of an aseptic carton packaging line, with conveyors and accumulation equipment coordinated to maintain a steady flow between filling and final packing stages.Machine Condition & Maintenance HistoryThe line is in operation and reported in very good condition. Recorded operating hours are 51,870. Regular Tetra Pak service has been performed at 500-hour and 2,000-hour intervals. No modifications or upgrades are reported, and spare parts are available.Operational Performance & VersatilityConfigured for juice production, this Tetra Pak filling line handles 200 Slim carton packs and incorporates straw application for consumer convenience. The format-specific configuration makes it suitable for producers seeking a used bottling line for carton-based beverage production and industrial packaging where a compact retail format is required.... Gedpfs Adtr Nox Acmskd

Condition: used, Year of construction: 2018, operating hours: 18,682 h, machine/vehicle number: PST43, Used HRS juice line pasteurizer hot-fill - 5000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems Ltd. hot fill juice pasteurizer is designed for continuous thermal treatment within beverage production and industrial packaging operations. It is intended to pasteurize juice before or during hot filling, supporting controlled product heating and thermal process consistency in a used bottling line.Manufacturer: HRS Process Systems Ltd.Machine type: Hot fill juice pasteurizerCapacity: 5000 LPHYear: 2018Process configuration: 1x12-MI120 - 89/16 - 6000 - 316L / 316L SMLSProcess configuration: 1x1-K44(2P) - 168/16 - 1200 - 304 / 316L ERWElectrical supply: 420 V, 50 HzAdvanced Automation & Control SystemsThe pasteurizer is equipped with an ADVANCE TC-20 / TC-20A temperature control interface. The controller supports set-point adjustment, high- and low-temperature alarm limits, differential control, probe calibration, relay restart delay, alarm relay timing and keypad locking. Digital input functions include door-open monitoring and selectable automatic or manual alarm reset logic.Controller functions also include probe-failure relay logic and password-protected programming parameters. A timed restart caution label is fitted, indicating that the unit may switch on after a time delay.Production Line Integration CapabilitiesThis juice pasteurizer can be integrated into a hot-fill beverage production line as a thermal processing stage upstream of filling equipment. In a typical industrial packaging configuration, product is thermally treated before transfer to a suitable hot-fill system, with downstream handling, labeling and secondary packaging arranged according to the final container format.The 5000 LPH capacity makes the equipment relevant for beverage production environments requiring continuous juice pasteurization. Final integration should consider product piping, hygienic connections, buffer capacity, filling-line throughput and thermal process coordination.Machine Condition & Maintenance HistoryThe machine records 18,682 running working hours. It is a 2018 unit with identified HRS Process Systems Ltd. process assemblies and an ADVANCE temperature controller. Inspection of heat-transfer surfaces, seals, pumps, instrumentation, temperature probes, electrical circuits and control parameters is recommended as part of commissioning planning for second hand bottling equipment.Operational Performance & VersatilityDesigned specifically for juice processing, this hot fill pasteurizer supports the controlled heating stage needed in hot-fill beverage production. Thermal treatment equipment of this type is used to help maintain a stable pasteurization process before product transfer to the filling area.The listed construction materials include 316L / 316L SMLS and 304 / 316L ERW configurations, supporting use in hygienic product-processing environments. Temperature control, alarm limits and probe-related functions provide operational tools for monitoring the pasteurization process.Installation Requirements & Site Preparation... Gsdpfx Aj Adtqlscmjkd

Condition: used, Year of construction: 2009, A filling machine with packer is available, 1) Filling machine Shikoku Kakoki S-PS65UC, compressed air connection: 588-882kPa, compressed air consumption: 1,300Nl/min, electrical connection: 148A, operating hours: 56,823h, suitable for milk, yogurt, fruit yogurt and similar products, 2) Packaging machine Tetra Pak TETRA CARDBOARD PACKER 70, wrap-around carton formats: 250, 500, 1000ml, year of manufacture: 2004, an on-site inspection is possible. Gjdez S Ivyjpfx Acmjkd

Condition: good (used), Year of construction: 2000, functionality: unexamined, Equipment: documentation/manual, Eccentric press VSS, type LE 400 C, complete with LASA strip feed system. Press LE 400 C Table size 1250 x 895 mm Ram size 950 x 560 mm Weight 21,000 kg Nominal capacity 400 t (metric tons) Stroke rate 40/min Stroke length 450 mm Dimensions 1550 x 2900 x 3610 mm Unwinding reel – up to 4000 kg Gedpoz Rk Shsfx Acmjkd - Coil outer diameter – 1600 mm - Coil inner diameter – 450/550 mm - Strip width – 450 mm - Revolutions – max. up to 25/min LASA 400 strip straightening machine - Adjustable height - Speed – up to 70 m/min - Complete documentation - More information and detailed images available upon request - The straightening machine with unwinding reel can also be sold separately. Press – after inspection - Stroke adjustment and clutch-brake

Condition: used, machine/vehicle number: LC573, Used olive oil processing line VITONE V3 3000 kg/hr The Used olive oil processing line VITONE V3 3000 kg/hr delivers a complete solution for olive oil extraction. Industrial olive mills and professional oil producers use this line to achieve efficiency, operational continuity, and consistent oil quality. The system processes up to 3000 kg of olives per hour, offering high performance while reducing capital investment compared to new equipment. Gjdpfs Adt Rxjx Acmokd Technical configuration of the processing line VITONE manufactures every component of the Used olive oil processing line VITONE V3 3000 kg/hr. As a result, the system offers seamless mechanical integration and compatibility between modules. Moreover, technicians benefit from simplified maintenance procedures. Operators can run the line continuously without compromising output quality. In particular, VITONE uses certified food-grade materials that resist corrosion and mechanical wear, ensuring long-term durability. Olive washing and feed system The VITONE V3 olive washer initiates the process. It uses water and agitation to remove leaves, stones, and soil. Subsequently, the integrated elevator feeds clean olives directly into the crusher. This approach, in turn, minimizes downtime and reduces manual handling. In addition, the enclosed design improves workplace hygiene and reduces contamination risks. Traditional olive crushing The VITONE granite millstone crushes the olives at low rotational speeds. Because of this, the system preserves phenolic content and aroma compounds. Therefore, the machine enables producers to obtain oil with superior sensory qualities. Operators favor granite millstones for high-quality extra virgin olive oil, especially in artisanal production contexts. In other words, this equipment combines tradition with technical efficiency. Paste mixing with thermal control After crushing, the paste pump transfers the olive paste to the VITONE malaxers. These units mix the paste while maintaining precise temperature control. This step is critical, as it promotes coalescence of oil droplets. Consequently, the system prepares the paste for high-yield separation. In addition, thermal stability prevents the degradation of volatile compounds, preserving quality. Solid-liquid separation The VITONE decanter centrifuge separates the solid phase (pomace) from the liquid phase (oil and water). This machine handles 3000 kg/h and operates continuously. Thanks to its high throughput, it ensures stable processing under demanding conditions. Furthermore, the decanter maintains excellent oil recovery rates and leaves minimal residual oil in the pomace. As a result, it significantly reduces waste. Final clarification and oil polishing Two VITONE vertical separators perform the final stage of oil clarification. These machines remove fine solids and water traces from the extracted oil. Notably, the built-in collection tubs simplify ...

Condition: used, machine/vehicle number: 007966, Position 1: Panel Feeding and Loading SCM-EVOLUTION C Gedpfswu Agpsx Acmskd undefinedPosition 3: Panel Stacking and Offloading SCM-EVOLUTION C

Condition: used, machine/vehicle number: 005642, Position 1: Panel Feeding and Loading IMA-COMBIMA/II/650/A/R3 Position 2: Double Sided Squaring/Edgebanding Machines IMA-COMBIMA/II/650/A/R3 Position 3: Panel Turning Device IMA-COMBIMA/II/650/A/R3 Position 4: Double Sided Squaring/Edgebanding Machines IMA-COMBIMA/II/650/A/R3 Position 5: Panel Turning Device IMA-COMBIMA/II/650/A/R3 Gkedjwuciwopfx Acmod Position 6: Panel Stacking and Offloading IMA-COMBIMA/II/650/A/R3

Condition: used, machine/vehicle number: 008505, Position 1: Front-Loading Panel Saws HOLZMA-HPP 350/43/43 - HEE 38/22 Godjy Hcd Sepfx Acmjkd Position 2: Lift Table HOLZMA-HPP 350/43/43 - HEE 38/22