Used Autoclave for sale (116)

Condition: used, functionality: fully functional, Autoclaves are used for the sterilization of packaged products that must reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Continuous autoclaves: These are integrated within production lines. Containers enter the autoclave automatically and exit at the other end already sterilized. This enables much higher production volumes. Godpfswxwzpex Admoil - FMC-JBT rotary cooker-coolers: These consist of two or more bodies in which each sterilization phase is carried out. Measurements: Module 1: 9 m x 2 m x 2.30 m. Module 2: 9 m x 1.55 m x 2.30 m. Module 3: 13 m x 2.10 m x 2.30 m.

Condition: used, Year of construction: 1987, functionality: fully functional, total height: 7,700 mm, tank capacity: 50,700 l, warranty duration: 6 months, inner diameter: 3,000 mm, TECHNICAL SPECIFICATIONS - Brand : LEJEUNE - Year : 1987 - Material : 304 stainless steel - Volume : 507 HL - Interior finish : 2B - Exterior finish : Brushed - 2.5 % flat bottom ROOF - Central chimney - Ø 500 stainless steel hatch with clamping arm - Lifting rings VIROLE - Stainless steel door 410×520 with external opening - Oval autoclave door and ladder support - Stainless steel DN70 butterfly valve with sludge trap - Stainless steel taster - 1 level - Coil circuit BOTTOM Gjdpfx Adjwal Uaemeil - DN70 stainless steel butterfly valve - 4 fixing brackets for floor slab DIMENSIONS - Diameter: 3000 mm - Ferrule height: 7700 mm

Year of construction: 2019, condition: ready for operation (used), Used for autoclave sterilisation, an on-site inspection is possible. Giedpsq Rfl Nsfx Admol

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Giedsv Si Szjpfx Admel Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Pressure vessel Diameter 1 .400 mm Length 4.100 mm Volume: 6.500 litres of preservative Godpfx Adjtnmz Nsmoil Wood volume: app. 3,2 m3 per charge Pressure: 0 to 3 bar (abs) Material: 10 mm HII boiler plate/P265GH Wood pack size: max 1 ,00 m x 0,80 m x 4,20 m Door: 1 rapid closure door Complete with internal rails and an anti-float sy stem for the trolley s Storage tank placed next to the autoclave Volume: 10.000 litres of preservative Diameter: 1 .600 mm Length: 5.350 mm Material: 5 mm steel plate 1 .0037 acc. to EN10025

Condition: good (used), Year of construction: 1966, machine/vehicle number: 352149, total width: 1,800 mm, total length: 4,800 mm, Autoclave used for heating rubber. The devices are complete, with full photo and paper documentation, inspection certificates, etc. Heating temperature 160 degrees Celsius. The price includes 3 pieces of Autklaw in a set. Gisdpfxod E Aqaj Admel

Condition: used, functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: they are suitable for any format and are used for food packaged in cans, jars and other flexible materials. AUTOCLAVE CHARACTERISTICS: - Incorporates sterilization system by means of recirculating water with heating and cooling. - Water distribution by spray. - 1 bayonet-type quick-closing door with adjustment sensors and safety lock. - Thermal insulation of 60 mm thick fiberglass blanket covered with stainless steel. -Brand new MICROPROCESSOR. - Capacity of 100 programs in memory with output for PC connection. - Safety devices for all the functions of the autoclave with acoustic warning. - Inner conveyor for entry and exit of the autoclave baskets. Gjdpfewndykox Admsil AUTOMATIC CHARACTERISTICS: - PC connection available. - Remote control available. - Temperature/time available or with Fo. - Incorporates product probes. EXCHANGER CHARACTERISTICS: - Brand: ALFA-LAVAL INSULATION CHARACTERISTICS: - 60 mm thick glass fiber. - Fully coated in mirror-polished stainless steel. Internal diameter: 1.40 mm AUTOCLAVE CHARACTERISTICS: - Incorporates a sterilization system using recirculating water with heating and cooling. - Water distribution via spray. - 1 quick-closing bayonet-type door with adjustment sensors and safety lock. - Thermal insulation made of 60 mm thick fiberglass blanket covered with stainless steel. - Brand new MICROPROCESSOR. - 100-program memory capacity with PC connection. - Safety features for all autoclave functions with an audible alarm. - Internal basket inlet and outlet conveyor. AUTOMATIC SYSTEM FEATURES: - PC connection available. - Remote control available. - Temperature/time or Fo available. - Product probes included. EXCHANGER FEATURES: - Brand: ALFA-LAVAL INSULATOR FEATURES: - 60 mm thick fiberglass - Fully coated in mirror-polished stainless steel. Internal diameter: 1.40 mm

Condition: new, functionality: fully functional, tank capacity: 21,100 l, total height: 5,760 mm, inner diameter: 2,507 mm, overall weight: 1,130 kg, TECHNICAL SPECIFICATIONS - 304L stainless steel tank - Storage tank - Vertical cylindrical tank on legs Gijdpfx Aowvuv Ssdmel - Off-centre conical dome - Conical bottom with 38% slope - Interior and exterior finish: 2B polished - Off-centre chimney, diameter 400 mm and height 300 mm - ELICA 316L stainless steel anti-retention top hatch - ELICA 308x440 mm oval autoclave door, opening at the bottom of the ferrule - 3 DIN 80 male simple connections on the dome - ELICA 1000 HL 316L stainless steel double-acting valve, horn mounting - 5 lifting rings, including 1 at the base of the tank - Support + manufacturer's plate - 1 DIN 65 male connector in ferrule - 1 DIN 65 male connector in ferrule - Earth connection - Total drain pipe + DIN 65 male connector at the end of the pipe - 4 external tank feet, height 800 mm - Flat stainless steel reinforcement belt 150x5 - 4 levelling jacks - 4 stainless steel 304L floor plates - Weight: 928 kg DIMENSIONS - Diameter: 2507 mm - Height: 5760 mm - Weight: 1130 kg

Condition: new, High Performance, High Accuracy pH & ORP. The InPro 3253i SG/120 is a digital, pre-pressurized, low maintenance ISM pH & ORP sensor combined with a temperature sensor for in-line measurement in demanding applications. The 120 mm version is optimal for short installation lengths. Optimized for Steam Sterilization Gedpfoh Rulhsx Admeil The steam-sterilizable pH glass membrane of the InPro 3253i SG/120 makes it optimal for processes where sterilization or autoclaving are required. Low Maintenance and Easy-to-Use This digital pH sensor has Intelligent Sensor Management (ISM) technology, offering predictive diagnostics to reduce maintenance and calibration. Sterilizable and Autoclavable This sensor provides fast and precise pH and ORP measurement, even after repeated autoclaving and sterilization cycles.

Condition: used, Year of construction: 2006, functionality: fully functional, Lisec laminating line with Scholz autoclave and Kaeser compressor. The line is disassembled but fully functional. The photos show both the period when it was operational and the current situation with the disassembled components. Gedsw Tyk Ispfx Admjil

Condition: new, functionality: fully functional, total height: 6,520 mm, overall weight: 1,300 kg, tank capacity: 32,000 l, inner diameter: 2,900 mm, TECHNICAL SPECIFICATIONS - Effective capacity: 31,900 L - Shell, bottom and dome: 316L stainless steel - Vertical cylindrical on legs - Off-centre conical dome - Conical bottom with 38% slope - Upper bottom slope: 21.26% - Interior and exterior finish: 2B polished - Shell thickness: 2 mm - Off-centre chimney: Ø 400 mm and height 300 mm - Upper stainless steel anti-retention hatch: 316L ELICA - 3 simple male DIN 80 connections on the dome Godpswvt Efofx Admjil - ELICA 308 x 440 mm oval autoclave door, opening at the bottom of the shell - ELICA 1000 HL double-acting valve, 316L stainless steel, horn mounting - 5 lifting rings, including 1 at the bottom of the tank - Support + manufacturer's plate - 1 oval autoclave door, 330 x 430 - 1 DIN 50 single male ferrule connection - 1 DIN 80 single male ferrule connection - Earth connection - Total drain pipe + DIN 50 male connection at end of pipe - 4 external tank feet, height 1000 mm - 1 flat stainless steel reinforcement belt 150 x 5 - 4 levelling jacks - 4 304L stainless steel floor plates DIMENSIONS and WEIGHT - Diameter: 2900 mm - Total height: 6520 mm - Weight: 1300 kg

Condition: new, Oxygen Probe for Sterile Conditions. The InPro 6800 dissolved oxygen sensor with 12 mm diameter body provides maximum accuracy and ultimate cleanability. Sensor for Hygienic Applications The sensor has been developed to comply fully with the EHEDG and FDA flat-surface recommendations for extremely high-level hygienic applications. Durable and Hygienic Design The 316L stainless steel construction allows for CIP, steam sterilization or autoclaving in place. The sensor finish eliminates process contamination. Gsdpfjh Rulljx Admoil Easy to Integrate The InPro 6800 DO sensor is easy to integrate into your process. Its watertight VP connector (IP68) helps ensure reliable measurements.

Condition: used, functionality: fully functional, tank capacity: 50,700 l, total height: 7,700 mm, outer diameter: 3,000 mm, TECHNICAL SPECIFICATIONS - Brand: CTIA, year: 1998 - Material: 304L - Volume: 507 HL - Interior finish: 2B - Exterior finish: Brushed - Flat bottom with 2.5% slope. Roof - Central chimney - Ø 500 stainless steel hatch with clamping arm - Lifting rings Bottom - DN70 stainless steel butterfly valve - 4 fixing brackets for foundation slab Shell - 410 x 520 stainless steel door with external opening - Oval autoclave door and ladder support - DN70 stainless steel butterfly valve with sludge trap - Stainless steel taster - 1 level - Internal coil with approx. 4.5 m² exchange surface area - 1 DN 150 ball valve on 7 tanks and 3 tanks with flange without valve DIMENSIONS Gisdpoww Eykofx Admjl - Diameter: 3000 mm - Height: 7700 mm

Condition: used, Year of construction: 1998, functionality: fully functional, tank capacity: 50,700 l, inner diameter: 3,000 mm, TECHNICAL SPECIFICATIONS - Brand: CTIA, year: 1998 - Material: 304L - Volume: 507 HL - Interior finish: 2B - Exterior finish: Brushed Roof - Central chimney - Ø 500 stainless steel hatch with clamping arm - Lifting rings Bottom - DN70 stainless steel butterfly valve - 4 fixing brackets for foundation slab Shell - 410 x 520 stainless steel door with external opening - Oval autoclave door and ladder support - DN70 stainless steel butterfly valve with sludge trap - Stainless steel taster Godowvu E Topfx Admeil - 1 level - Internal coil with approx. 4.5m2 of exchange surface area DIMENSIONS - Diameter: 3000 mm - Shell height: 7700 mm

Condition: used, functionality: fully functional, TECHNICAL SPECIFICATIONS - Vertical cylindrical tank on legs - Martinez Sole brand - Flat-bottomed tank on stacked legs - Capacity: 260 hl + 200 hl + 150 HL - Material: 304 - Interior finish: cold-rolled - Exterior finish: BLAF2B - Year 2003 • Upper compartment: Roof - Central chimney - Ø 500 hatch with clamping studs - 1 reflux pipe - Walkway support Ferrule - 1000 x 800 stainless steel guillotine door with flap - For racking, Ø 70 stainless steel ball valve - Stainless steel taster - 8 m² channel thermoregulation circuit - 1 level with ruler Bottom - Self-draining spoon bottom - Full drain, Ø 70 stainless steel ball valve • Middle compartment: Roof - Off-centre chimney - Ø 500 hatch Ferrule - 310 x 420 oval stainless steel autoclave door with internal opening - For racking, Ø 70 stainless steel ball valve and decanter elbow - Stainless steel taster - 5.5 m2 channel temperature control circuit Bottom - For complete drainage, Ø 70 stainless steel ball valve • Lower compartment: Roof - Off-centre chimney - Ø 500 hatch Ferrule - 410 x 530 stainless steel door with internal opening - For racking, Ø 70 stainless steel ball valve and decanter elbow - Stainless steel taster - 5.5 m2 channel thermoregulation circuit Base - For complete drainage, Ø 70 stainless steel ball valve - Feet with adjustment screws and plates DIMENSIONS - Diameter: 3600 mm Gisdpfx Ajwvr Husdmol - Overall height: approx. 9100 mm

Condition: used, Year of construction: 2003, functionality: fully functional, total height: 9,100 mm, tank capacity: 61,000 l, inner diameter: 3,600 mm, TECHNICAL SPECIFICATIONS - Reference: 006837 - Vertical cylindrical tank on legs - Martinez Sole brand - Flat-bottomed tank on stacked legs - Capacity: 260 hl + 175 hl + 175 HL - Material: 304 - Interior finish: cold rolled - Exterior finish: BLAF2B - Year 2003 • Upper compartment: Roof - Central chimney - Ø 500 hatch with clamping studs - 1 reflux pipe - Walkway support Ferrule - 1000 x 800 stainless steel guillotine door with flap - Clear draining, Ø 70 stainless steel ball valve - Stainless steel taster - 8 m2 channel thermoregulation circuit - 1 level with ruler Bottom - Self-draining spoon bottom - Total drainage, Ø 70 stainless steel ball valve Giodpewqq Iyofx Admsl • Middle compartment: Roof - Off-centre chimney - Ø 500 hatch Ferrule - 310 x 420 oval stainless steel autoclave door with internal opening - For clear draining, Ø 70 stainless steel ball valve and decanter elbow - Stainless steel taster - 5.5 m2 channel thermoregulation circuit Bottom - Full drain, Ø 70 stainless steel ball valve • Lower compartment: Roof - Off-centre chimney - Ø 500 hatch Ferrule - 410 x 530 stainless steel door with internal opening - For racking, Ø 70 stainless steel ball valve and decanter elbow - Stainless steel taster - 5.5 m2 channel thermoregulation circuit Base - For complete drainage, Ø 70 stainless steel ball valve - Feet with adjustment screws and plates DIMENSIONS - Diameter: 3600 mm - Overall height: approx. 9100 mm