Used Autoclave for sale (120)

Condition: used, functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. CHARACTERISTICS: * Forced ventilation Godpfewndplox Aacokc *Shower system. * Temperature and time recorder. CONSUMPTIONS: - Steam: Maximum flow rate 2100 kg/h. Approximate consumption 475 kg/cycle. - Electrical energy in KW: 22kw - Cold water in tn/hr: Flow rate 25m³/h. - Compressed air in m³/min. The theoretical required to cool the autoclave in the worst air requirement condition (empty or with low load) is 2.91 m³/minute. - Total amount of drainage in ton/day: Depends on the number of cycles. Approximately 0.8 m3/cycle will be drained from inside the autoclave at the end of the cycle. The water output of the exchanger will be the same as the water input during cooling, 25 m³/h. - Total raw water consumption in tn/day: 0.8 m³/cycle final + 12-16 m³ cooling.

Year of construction: 1978, condition: used, 1. Scholz Autoclave - Internal Diameter: 3300mm - Internal Length: 10200mm - Capacity 102000L - Pressure: 15 bar - Year: 197 - Serial: 33189 3. Automated Bogie Loading System - Pneumatic Lowering Drawbridge - KEEVALITE Hydraulic System with Motor Gksdpfx Aehgbaksacoc - Width: 1500mm - Length: 6000mm 4. Steam, Air & Water Regulation Systems - AUMA Water Regulator/ Valve Actuator - AUMA Steam Regulator/ Valve Actuator - ECKARDT Compressed Air Vent System - ECKARDT Compressed Air Intake System 5. Control Cubicles with TOSHIBA E910 control panel display 6. 8x Loading Frames 7. MORROW ELECTRICS Control Panel for Autoclave Door & Loading

Condition: used, overall dimensions 900x1450x1380 mm; capacity 240 ltr; power supply 400 V; power 16.5 kW; pressure up to 2.5 bar; Gsdpfx Aajwrp S Hscskc 3 baskets 1/3; weight 332 kg.

Condition: used, Year of construction: 1992, Technical details: Godju Nz I Tspfx Aacekc max. temperature: 120 °C internal diameter: 980 mm internal length : 2580 mm external diameter: 1500 mm external diameter : 2740 mm wall strength: ca. 6,5 mm content: ca. 2000 l weight: 1425 kg Autoclave tank It is possible that this autoclave were built for the process of steam sterilization (according to operating parameters) The operating overpressure of +2 bar per room probably refers to the execution of the steam sterilization process, not to the pressure resistance of the container. - Permissible operating temperature 120 °C *

Condition: used, functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Rotary autoclaves: they are used to sterilize products that present greater difficulties in heat transmission. Examples are vegetables in grains, grated or diced, and beverages such as milkshakes, teas, coffees or evaporated milk. In this type, the basket rotates on itself inside the autoclave, stirring the contents and preventing the pieces closest to the sides of the pot from roasting. Steam consumption: - Steam consumption: 350 kg. - Required flow rate: 2400 kg/h Gkodpfx Aaowndcrecsc Cold water consumption: - Cold water consumption: 8 m³. - Required flow rate: 36 m³/h. Compressed air consumption: - Consumption per cycle: 11 Nm³ - Required flow rate: 110 Nm³/h * Consumption may vary according to the cycle and temperature before and after sterilization. Fluid pressures: - Compressed air pressure 6 bar - Steam pressure 4/5 bar - Water pressure 3/5 bar

Condition: used, functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. Characteristics TUBULAR INTERCHANGER: Brand: Barriquand Steriflow Type: IJMS Temperature: 200ºC Design pressure: 7 Bar Test pressure: 11.9 Bar Surface area: 11.25 m² Features: - Start-up steam (6 Bar): 1,100 kg/h - Process steam (6 Bar): 325 kg/h - Electric consumption: 11 kw. - Water (4 Bar): 6,000 L Fluid pressures: - Compressed air pressure 6 bar - Steam pressure 4/5 bar Gjdpownc A Dofx Aacskc - Water pressure 3/5 bar

Condition: excellent (used), Set of 2 autoclaves for wood impregnation. Gsdpfew S N Awox Aacskc Internal diameter: 1950 mm Total length: 13,500 mm + 3 tanks for impregnant

Condition: used, This listing is for a Belimed PST 9-6-12 HS1 Steam Sterilizer. The unit is in excellent working condition and is ready for immediate release. The Belimed PST 9-6-12 HS1 is a top-of-the-line pharmaceutical autoclave designed for saturated steam sterilization of laboratory and production equipment, including heat- and moisture-stable porous and non-porous loads. This advanced stainless steel sterilizer supports the 6050 and 6065 sterilization processes with integrated Filter Integrity System (FIS), ensuring reliable sterilization and validation compliance in regulated environments. Engineered by Belimed Life Science and manufactured in Germany, this system delivers high process reliability, precise temperature control, and full compliance with GMP/cGMP standards, making it ideal for use in research, pilot, and GMP production settings. This HS1 configuration features a single-door chamber, water-jacket cooling, vacuum-assisted drying, and a user-friendly B-Touch interface with integrated process control. It is optimized for efficient sterilization cycles with minimal operator intervention. Key Features GMP-ready design supporting pharmaceutical-grade sterilization processes (6050/6065) Integrated Filter Integrity System (FIS) for monitoring and verifying sterilization filter integrity User-friendly B-Touch touchscreen interface with Siemens WinCC Unified or Rockwell FT Optix Water-jacket cooling and vacuum drying ensure rapid cooling and effective drying of chamber loads Single-door HS1 configuration optimized for ergonomic loading and unloading High-quality AISI 316L stainless steel construction with hygienic surface finishes (Ra < 0.8 µm) Automated operation with redundant sensors and independent measurement circuits for reliable sterilization Compliance with GAMP5, 21 CFR Part 11, Annex 11, and optional ASME BPE certification Supports modular accessories including trolleys, batch carts, perforated or wire-mesh shelves, and cleanroom integration Technical Specifications Manufacturer: Belimed Life Science (Germany) Model: PST 9-6-12 HS1 Sterilization Processes: 6050 / 6065 (Steam, Pre-Vacuum, Gravity) Filter Integrity System (FIS): Yes Chamber Dimensions (W × D × H): 1030 × 600 × 1380 mm Usable Chamber Volume: 710–850 L External Dimensions (H × W × D): 1940 × 2150 × 1710 mm Weight: Approximately 1,010 kg Chamber Material: AISI 316L Stainless Steel Surface Finish: Ra < 0.8 µm (≤ 0.6 µm optional) Door Type: Single-door HS1 Loading Type: Ground loader (GR) Cooling System: Water-jacket cooling Gkjdpjxmi Hqsfx Aacec Vacuum System: Integrated water-ring vacuum pump with optional water recovery Control System: B-Touch interface with PLC Electrical Supply: 400 V / 50 Hz (other voltages optional) Compliance: GMP / cGMP, 21 CFR Part 11, Annex 11, ASME BPE options Year of Manufacture: Available on request Serial Number: Available on request Applications Sterilization of laboratory glassware, stainless steel equipment, and porous loads in biopharmaceutical production Small- to medium-scale pilot manufacturing with validated sterilization cycles GMP production environments requiring full regulatory compliance Sterilization of equipment used in vaccine, gene therapy, and biologics research Microbiology laboratories for culture media, instruments, and consumables Benefits Scalable and reliable for pilot and full production batches Validated sterilization with integrated FIS and redundant sensors ensures reproducible cycles High-...

Year of construction: 2012, operating hours: 75 h, condition: like new (used), This Vötsch Hephaistos Industrial Microwave Chamber has had extremely low hours usage during its life so far, on 75 hours .. having been installed and minimally utilized from time to time for a single research project at the University of Sheffield AMRC research department known as the “Factory of the Future”. Sold new for a price of approx 250,000.00Euro. Contact us now for an exceptional offer for this high tech unit in as new condition. VHM Hephaistos Industrial Microwave Chamber For Aerospace and Automotive Engineering The Research Project The VHM Hephaistos Industrial Microwave Chamber for component testing was developed in cooperation with the Karlsruhe Institute of Technology (KIT). It is the result of a joint development project sponsored by the German Federal Ministry of Education and Research (BMBF). Alongside KIT, the Composite Research Center of EADS in Munich, the Institute for Aircraft Design (IFB) at the University of Stuttgart, GNK Aerospace in Munich and Vötsch Industrietechnik were involved in the project. Microwave system The VHM Hephaistos Industrial Microwave Chamber from Vötschtechnik is an internationally patented system. Fast and energy-efficient production processes are possible by using microwaves. The microwave chamber is characterized by its hexagonal geometry with a very high field homogeneity. This is a major advantage when thermoforming fibre composites (CFRPs) in the aerospace and automotive industries. During the targeted volumetric heating of the products, the microwaves directly enter the material so that energy is delivered directly and the chamber does not require heating. This increases the heating rate and throughput, saving energy and time in addition. Reduced production costs This industrial microwave chamber guarantees you reduced costs due to shorter heating, process and cooling times required for curing CFRP components. Its material processing technology means the microwave can produce energy input into the component to be heated while the oven itself remains cold. In comparison to the process in autoclaves, the processing times are reduced by up to 50 %. Energy consumptions is reduced by up to 70%. Gsdpfx Aastvz Rfocokc Advantages: Possibility to use metal parts, such as conventional metal tools and feed systems, in the microwave field High degree of product quality thanks to the maximum homogeneity of the microwave fields provided by the hexagonal chamber structure. By using microwave absorbing materials, additional positive effects can be achieved Sizes from laboratory scale to large systems, e.g. as are required in the aerospace industry, can be achieved The modular design allows a flexible adjustment to your product Volumetric and selective heating for energy-efficient processes Precise heating of the products Hybrid systems, e.g. in combination with hot air

Condition: excellent (used), Lagarde 1400mm diameter retorts/autoclaves. Very light use, one has worked only 345 cycles and the other 1517 cycles. Have been cooking food products in sealed plastic trays but are commonly used for cooking PP / PE / PVC pouches, metal cans, foil trays, glass jars and plastic bottles. Gksdpow Rn N Tefx Aacjc

Year of construction: 2018, condition: used, with mesh safety enclosure, welded mesh fence, 1 sliding door for loading, 14 storage positions made of steel frame (blue), mobile loading trolley, IPSEN loading and unloading system, year of manufacture: 2018, serial number: 30.5185-60, 2 hinged doors, IPSEN hardening furnace DL(M)-5-E, year of manufacture: 2018, serial number: 30.5185-50, min./max. working temperature: 150/450°C, connection values: 49 kVA/38 kW/400 V/50 Hz, IPSEN autoclave "Electromagnetic Field Emission Category 2 (EN12198)", Ø approx. 180x400 cm, type: RUHT-524 (FV)AvaC(N), year of manufacture: 2018, serial number: 30.5185-10, min./max. working temperature: 150/1,320°C, 1 cooling unit KKT cBoxX, no.: 909120-00575, year of manufacture: 2018, water softening unit, pressure vessel MASCHINEN- UND BEHÄLTERBAU MB170512-3.14300L, volume: 14,300 l, year of manufacture: 2018 Gkodoxnahzopfx Aacjc

Year of construction: 2016, condition: ready for operation (used), A complete soup production line including can filling, sealing, and washing processes is available. 1) Steam boiler Loos, year of manufacture: 1990, max. operating pressure: 6bar, steam generation: 1250kg/h. Including gas burner Weishaupt, year of manufacture: 1990, max. power: 1730kW, adjustable pressure range: 5mbar-140mbar. 2) Autoclave Lubeca. Including 20 cooking trolleys and various intermediate racks. 3) Can washing machine W. Busser 521-1, year of manufacture: 1984. Including conveyor belt. 4) Can filling and sealing machine. Including conveyor belt. 5) Inkjet printer Linx 8900, year of manufacture: 2019. 6) Basket washing machine Hobart FUX-SAF, year of manufacture: 1990. 7) 2x cooking kettles A.S.T.A. Steiner, max. operating overpressure vessel/double jacket: 0bar/1bar, max. operating temperature vessel/double jacket: 100°C/119°C, volume vessel/double jacket: 300L/20L. 8) Can labeling system. An on-site inspection is possible. This is a complete system with conveying technology and peripheral equipment. Individual or partial sale of the units is possible upon agreement. Gedpfxjxliurs Aacekc

Condition: used, Year of construction: 1993, functionality: fully functional, tank capacity: 80,100 l, usable tank capacity: 80,100 l, total width: 4,000 mm, inner diameter: 4,000 mm, outer diameter: 4,000 mm, TECHNICAL SPECIFICATIONS - Flat-bottom tank - Material: stainless steel - Capacity: 80,100 litres - Exterior finish: brushed RING - 1 refill tube - 1 tasting tap - 1 oval autoclave door - 1 support and level tap - 1 partial drain valve on square flange with stainless steel plug BOTTOM - Flat - Boitard with total drain valve on square flange with stainless steel cap Godpfx Aow Upzljacokc DIMENSIONS - Diameter: 4000 mm APPENDICES - Liquid fertiliser storage: suitable and compatible - 6-month warranty - Complies with CE standards

Condition: used, This listing is for the Avestin EmulsiFlex-C5 for homogenizer with sealed toolings and spares The unit is in full working condition and is ready for immediate use EmulsiFlex-C5 High Pressure Homogenizer The Avestin EmulsiFlex-C5 is a high-pressure, pneumatically powered homogenizer designed for laboratory-scale applications. It is ideal for processing small to medium sample volumes, from 7 mL up to 5 L/h, depending on the pressure applied. How It Works: High Pressure Homogenisation High pressure homogenisation is an efficient and easy-to-use technique for cell disruption and liposome/emulsion processing. The principle involves pumping the sample through a valve with a small aperture. The sample transitions from very high pressure (up to 30,000 psi) on the pump side to atmospheric pressure on the outlet side. This sudden drop in pressure creates intense shear forces, disrupting cell membranes or dramatically reducing liposome/emulsion sizes. For cells, the pressure-induced shear forces rupture the membranes, effectively lysing the cells. For liposomes and emulsions, this process reduces their size from micron to nanometer range, often resulting in uniform particles with narrow size distributions. Unique Features of the EmulsiFlex-C5 Dynamic Homogenising Valve The C5 uses a dynamic homogenising valve, which maintains constant pressure during sample processing. This consistency ensures the formation of highly uniform liposomes and micro-emulsions, with tight particle size distributions. Efficient Cell Disruption Most cells (including E. coli) can be lysed in a single pass, minimizing over-processing and reducing the risk of protein denaturation or degradation. Godpfsxhgawsx Aacekc Pressure Range: Adjustable from 500 to 30,000 psi Flow Rate: 1–5 L/h depending on pressure Minimum Sample Volume: 7 mL Holdback Volume: Less than 1 mL Temperature Control: Can be used with ice baths, external chillers, or in cold rooms Autoclavable: Easy cleaning and sterilization (SIP-compatible) Compact Size: 430 × 160 × 320 mm, 25 kg Power Source: Requires compressed or bottled air. For most applications (e.g., E. coli disruption or liposome formation), 100 psi air pressure is sufficient. Applications Disruption of bacterial, yeast, algal, insect, or mammalian cells Nano-sized liposome and emulsion formation Particle size reduction in pharmaceuticals, cosmetics, and food products Liposomal drug delivery systems Efficient homogenisation for biochemical and biophysical research

Condition: ready for operation (used), Plant Liquidation – Complete Equipment for Tire Retreading For sale is a comprehensive production line for tire retreading, ideally suited for businesses specializing in tire renewal. ⸻ Machinery & Equipment • Buffing/Rasping Machine: Tread and casing preparation (roughening and buffing) • Repair/Skiving Station: Grinding and patching • Extruder/Filling Unit: Cushion gum processing • Cementing/Adhesive Station • Building/Banding Station: For precured tread application • Envelope/Vacuum Station: Envelope and sealing operations • Autoclave including accessories (tire rings, vacuum pump, pipelines, carts) Additional Workstations: • Casing Spreader / Inspection stand • Pressure & Leak Test Station • Final Inspection (Tread and Sidewall Check) Plant & Auxiliary Equipment: • Compressors (Kaeser & Atlas Copco brands) • Extraction and dust removal system at grinding stations • Tire and material carts, shelving units • Tool and small parts set (valves, gaskets, clamps) • Transport and cooling racks • Various vulcanization and operating accessories Documentation: Photos, parts list, and additional documents available on request ⸻ Condition & Delivery • Used, fully operational • Inspection possible at any time • Accessories available • Dismantling, loading, and shipment easily arranged • Shipping via freight forwarder possible ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net, plus 19% VAT. Subject to change and errors excepted. Gkodsxk Tuajpfx Aacec

Condition: good (used), JBT FMC Foodtech autoclave / retort in nice condition with upgraded controls. Has come direct from a European pate producer. Single door, 1.4m diameter 6 trolley capacity. We also have 2 x 4 trolley A144 versions from the same factory. Gjdpfx Aorzbfceacjkc

Year of construction: 2025, condition: used, comprising the following items: Placement unit (594), consisting of: 1 chain conveyor SEB-EURODRIVE, dimensions (W x H x D): approx. 350 x 145 x 60 cm; 1 rail conveyor device TEGEL-TECHNIK (595), carriage dimensions (W x H x D): approx. 130 x 160 x 130 cm, control system SIEMENS SIEMATIK HMI, rail length: approx. 25 m; 1 double hardening furnace PADELTTHERM KEU 1008/400-S (596), year of manufacture: 2023, connected load 4 and 3 phase 400V/50Hz, 60 kW, maximum temperature: approx. 400°C; 1 hardening furnace PADELTTHERM KEU 1008/400-S (597), year of manufacture: 2023, connected load 4 and 3 phase 400V/50Hz, 60 kW, maximum temperature: approx. 400°C; 1 autoclave ALD VACUUM Modultherm (598), year of manufacture: 2022, recorded operating hours: approx. 6,968, max. temperature: approx. 1,250°C, capacity: approx. 4,909 l / 338 l, 1 mobile autoclave unit on rail system, rail length approx. 25 m, ID: 39716; 1 pressure vessel, SABAWERK 47-001310, (599), capacity: approx. 5,000 l, max. allowable pressure: PS-1/40 bar, test pressure: approx. 58 bar, inspection date: 2023, maximum operating temperature approx. 50°C, min. operating temperature: approx. -10°C; 1 pressure vessel SABAWERK 47-001310, max. capacity: approx. 6,000 l, max. allowable pressure: PS-1/9 bar, test pressure: approx. 12.9 bar, inspection date: 2023, serial no.: 20550; 1 gas mixing unit FLUSYS (601), year of manufacture: 2022, comprising: 1 mixing battery FLUSYS type FSP-2030A_01, serial no.: M22111122A, year 2022, 1 compressed air drying unit ESD MK-HP575, year 2022, max. pressure: approx. 45 bar, max. capacity: approx. 575 m³/h; 1 compressed air compressor unit SAUER (602); 1 water treatment plant TECHNOTRANS (603); 1 pressure vessel KOMNINO KPT-10000-40/1.8 (604), year of manufacture: 2023, max. capacity: approx. 10,000 l, max. allowable pressure: approx. 57.2 bar, serial no.: 10054; 1 aluminium platform ladder, 10-steps, FARAONE 300/SN (605), max. load: approx. 150 kg, height: approx. 262 cm, net weight: approx. 35 kg, serial no.: 20230729002; 1 2-door steel cabinet (606), contents: various consumables for the multi-process hardening system. Gjdpfexnak Asx Aacokc

Condition: used, functionality: fully functional, Autoclaves are used for the sterilization of packaged products that must reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Continuous autoclaves: These are integrated within production lines. Containers enter the autoclave automatically and exit at the other end already sterilized. This enables much higher production volumes. - FMC-JBT rotary cooker-coolers: These consist of two or more bodies in which each sterilization phase is carried out. Measurements: Module 1: 9 m x 2 m x 2.30 m. Module 2: 9 m x 1.55 m x 2.30 m. Gkjdpswxwzpofx Aacec Module 3: 13 m x 2.10 m x 2.30 m.

Condition: used, Year of construction: 1995, functionality: fully functional, inner diameter: 3,000 mm, TECHNICAL SPECIFICATIONS - Brand: LEJEUNE, year: 1995 - Material: 304L - Volume: 507 HL - Interior finish: 2B - Exterior finish: Brushed - Flat bottom with 2.5% slope. Roof - Central chimney - Ø 500 stainless steel hatch with clamping arm - Lifting rings Bottom - DN70 stainless steel butterfly valve - 4 fixing brackets for foundation slab Shell - 410 x 520 stainless steel door opening outwards - Oval autoclave door and ladder support - DN70 stainless steel butterfly valve with sludge trap - Stainless steel taster Gkedpfxowvuzno Aacjc - 1 level DIMENSIONS - Diameter: 3000 mm - Shell height: 7700 mm

Condition: used, This listing is for 1 of 2 Quattro Fluid SystemFlow 1000S Gjdsxhfp Rjpfx Aacekc These units is in full working condition and is ready for immediate use Overview & Application The Quattroflow 1000 S is a quaternary (four‑piston) diaphragm positive‑displacement pump—engineered for gentle, sterile handling of shear‑sensitive fluids such as proteins, vaccines, cell suspensions, and other biopharmaceutical or food-grade products. Its design features—like seal‑less operation, low shear, low pulsation, and dry‑run capability—make it ideal for critical applications including: Filtration systems: Tangential‑flow filtration (TFF), recirculation pumps, filter cartridges Chromatography: Gradient mixing and feed pumps Centrifuge feeding and homogenization Aseptic filling lines and other sensitive processing tasks Commonly processed media include albumin, IgG antibodies, enzymes, vaccines, cell and virus suspensions, dairy products, and cosmetic or polymeric solutions. Technical Specifications Here’s what’s known about its performance and build: Flow rate: Continuously variable between ~25 to 1000 L/h (at atmospheric pressure); around 750 L/h at 6 bar (depending on configuration) Max Pressure: Up to 6 bar, with high‑pressure variants available upon request Drive mechanism: Four‑piston diaphragm setup actuated by an eccentric shaft; standard variant uses a 5° eccentric shaft reaching up to 1,800 rpm Material & Construction: Pump head: Stainless steel grades 1.4435 or 1.4539, optional alternatives (like PEEK) available Membranes: Santoprene (diaphragm), EPDM (valve membranes) Priming and Pumping Features: Self‑priming, dry‑run capable Four directional porting—pump orientation flexible No shaft seals or wetted rotating parts, minimizing wear and product heating Internal volume (filling volume): Approx 35 mL; designed to minimize dead volume and aid product recovery Connections: Standard ¾″ TC (Tri‑Clamp) sanitary ferrule; other flange types available Dimensions & Weight: Pump: 523 × 155 × 212 mm, ~23 kg Control unit (frequency inverter): 350 × 155 × 212 mm, ~6 kg Electrical: 230 V AC (50 Hz) via a control box with 6.3 A fuse; motor IP54, control box IP53 Key Advantages This model offers several standout benefits: Gentle, high‑integrity fluid handling—ideal for fragile biologics due to low shear and pulsation Contamination-free design—no mechanical seals, minimal abrasion Robust operation—powerful 370 W motor, simplified maintenance with fewer parts Aseptic and sterile process readiness—autoclavable, self‑draining, hygienic construction Installation adaptability—four flow directions, small footprint, flexible hookups

Year of construction: 2008, condition: used, The Getinge Autoclave is designed for the sterilization of porous or laboratory materials, which are capable of withstanding seam at high temperatures in excel of 100°. In stainless steel 1.4301 (AISI 304). Gjdpfoxd Aiyjx Aacskc FRONT SURFACE TEXTURE: Tetra polished Ra< 1,2 micrometer THICKNESS: 1.0 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Korimat KA-240 Autoclave Pressure Cooker 230V Gas-operated V2A 21kW 240L Built in 2009 2.5 bar The system is fully functional ready for immediate use. Accessories: 3-part basket Further information available upon request! Cash or prepayment! Sale to businesses only. No guarantee or warranty. Gksdpfjv Tyu Asx Aacjc

Condition: used, This listing is for 1 of 2 Applikon BioPilot 70L Fermenter. The unit is in full working condition and is ready for immediate use Overview The Applikon BioPilot 70L is a fully integrated, pilot-scale fermentation system designed for microbial and cell culture applications in research, development, and small-scale production. Manufactured by Applikon Biotechnology, a global innovator in advanced bioreactor systems, the BioPilot 70L offers exceptional flexibility, process control, and scalability—bridging the gap between laboratory and production environments. Key Features Advanced Bioprocess Technology Precision Control: Integrated control of key parameters such as pH, dissolved oxygen (DO), temperature, agitation, and feed rates. Scalable Design: Built to mimic laboratory-scale conditions, enabling seamless scale-up to production volumes. Gjdpfxexhfngo Aacekc Modular Automation: Compatible with Applikon ez-Control, DeltaV, or Lucullus® PIMS for sophisticated process control and data management. High-Quality Construction 70L Total Volume (50L Working Volume): Ideal for pilot studies, process optimization, and small-batch production. 316L Stainless Steel Vessel: Electro-polished and cGMP-compliant for pharmaceutical and biotechnological use. Jacketed Design: Enables precise temperature control via thermal fluid circulation. Technical Specifications Model: BioPilot 70L Total Volume: 70 liters Working Volume: 50 liters (typical) Vessel Material: 316L stainless steel, electro-polished Control Options: ez-Control, DeltaV, Lucullus® Sterilization: In-situ sterilizable (SIP) and Clean-in-Place (CIP) compatible Ports: Multiple ports for probes, additions, sampling, gas inlets/outlets Applications Biopharmaceuticals: Production of recombinant proteins, enzymes, vaccines Industrial Biotechnology: Fermentation of bio-based chemicals and specialty metabolites Food & Beverage: Cultivation of probiotics and functional ingredients Academic & R&D: Process development, scale-up studies, and microbial strain screening System Components 70L stainless steel fermentation vessel (jacketed) Modular control tower or integrated skid system Peristaltic pumps for acid/base, antifoam, and nutrient feed Autoclavable or SIP-compatible sensors for pH, DO, temperature, and level Gas flow control via mass flow controllers (MFCs) or rotameters Harvest and sampling ports, exhaust condenser, and sterile connections Quality Assurance Applikon fermentation systems are engineered and manufactured under strict quality control standards, ensuring full cGMP and FDA compliance where required. Factory Acceptance Testing (FAT), documentation, and validation support are provided for regulated environments. Benefits Flexible Configuration: Customizable to meet process-specific requirements Reliable Scale-Up: Accurate replication of lab-scale conditions in pilot volumes High-Level Automation: Advanced monitoring and control systems for optimized yields Ease of Integration: Compatible with existing bioprocess infrastructure Compliance-Ready: Suited for regulated production and research environments Conclusion The Applikon BioPilot 70L Fermentation System is the perfect solution for companies and institutions needing a reliable, scalable, and compliant bioreactor platform. With precise control, robust construction, and full integration capability, it empowers bioprocess development from the lab bench to commercial readiness.

Condition: used, This listing is for the Unity Scientific Spectra Star 2600XT bench‑top near‑infrared (NIR) analyzer The unit is in full working condition and is ready for immediate use The SpectraStar 2600XT‑is a high-performance, bench‑top near‑infrared (NIR) analyzer developed by Unity Scientific, designed for rapid, versatile compositional analysis across a wide variety of sample types, including solids, slurries, and liquids. Overview & Key Features Design & Functionality Dual Convection Technology: Offers adjustable fan speed from 0 % (natural convection) to 100 %, enabling tailored air circulation depending on the sample type or protocol Temperature Range: Operates from 5 °C above ambient up to 105 °C, making it suitable even for drying tasks Temperature Uniformity & Stability: With fan off: ±0.6 °C spatial uniformity With fan at full speed: ±0.2 °C to ±0.4 °C uniformity (at 37 °C) Temporal stability: ±0.1 °C (at 37 °C) Capacity & Build Interior Volume: 178 L (about 6.3 cubic feet) Shelving: Comes with 2 stainless-steel shelves (each supporting up to ~25 kg) and can accommodate up to 19 shelves for flexible arrangement Construction: Corrosion-resistant stainless steel interior (AISI 304) with easy-to-clean rounded corners Controls & Usability Controller: Microprocessor-based with a clear vacuum fluorescent display for easy setting of temperature, timers, and monitoring Timer Functionality: Programmable daily, weekly, or real-time ON/OFF cycles for scheduling experiments Extras: Internal power socket (120 V models) for operating devices like shakers or stirrers inside the chamber Internal glass viewing door and optional internal lighting for observing samples without opening the chamber RS‑232 interface for data logging and connectivity Stackable design without tools—efficient laboratory space use Safety & Maintenance Alarms: Automatic over- and under-temperature alert system protects sample integrity Security Model (IMH180‑S): Adds a lockable outer door and audible alarms for door‑open conditions Includes a certified 140 °C decontamination cycle (about six hours) to sterilize the chamber without needing an autoclave—ideal for high‑sterility environments Gsdpfx Aexhd I Sjacskc Dimensions & Electrical Specs Feature Specification Exterior (W × D × H) 64 × 74 × 92 cm (25.2 × 29.1 × 36.2 in) Interior (W × D × H) ~46 × 54 × 70 cm (18.3 × 21.4 × 27.9 in) Weight ~70 kg (154 lb) Electrical (120 V) 1,020–1,390 W; 8.5 A at 60 Hz Materials Stainless steel (interior), durable housing Summary The Thermo Scientific Heratherm IMH180 is a high-performance, reliable incubator tailored for demanding laboratory tasks: Precision: Excellent temperature control and uniformity. Flexibility: Adjustable airflow, generous interior volume, and timer options. Convenience: Viewing window, internal socket, and connectivity via RS‑232. Cleanability & Space Efficiency: Stainless steel interior and stackable design. Advanced Safety (Security Model): Door alarms, lockable access, and high-temperature decontamination. Perfect for microbiology, cell culture, pharmaceutical testing, and drying applications where sample integrity and process control are critical.

Condition: used, This listing is for the Thermo Scientific Heratherm IMH180 Incubator The unit is in full working condition and is ready for immediate use The Thermo Scientific Heratherm IMH180 is a high-performance, reliable incubator tailored for demanding laboratory tasks: Precision: Excellent temperature control and uniformity. Flexibility: Adjustable airflow, generous interior volume, and timer options. Convenience: Viewing window, internal socket, and connectivity via RS‑232. Cleanability & Space Efficiency: Stainless steel interior and stackable design. Advanced Safety (Security Model): Door alarms, lockable access, and high-temperature decontamination. Perfect for microbiology, cell culture, pharmaceutical testing, and drying applications where sample integrity and process control are critical. Design & Functionality Dual Convection Technology: Offers adjustable fan speed from 0 % (natural convection) to 100 %, enabling tailored air circulation depending on the sample type or protocol Temperature Range: Operates from 5 °C above ambient up to 105 °C, making it suitable even for drying tasks Temperature Uniformity & Stability: With fan off: ±0.6 °C spatial uniformity With fan at full speed: ±0.2 °C to ±0.4 °C uniformity (at 37 °C) Temporal stability: ±0.1 °C (at 37 °C) Capacity & Build Interior Volume: 178 L (about 6.3 cubic feet) Shelving: Comes with 2 stainless-steel shelves (each supporting up to ~25 kg) and can accommodate up to 19 shelves for flexible arrangement Construction: Corrosion-resistant stainless steel interior (AISI 304) with easy-to-clean rounded corn Controls & Usability Controller: Microprocessor-based with a clear vacuum fluorescent display for easy setting of temperature, timers, and monitoring Timer Functionality: Programmable daily, weekly, or real-time ON/OFF cycles for scheduling experiments Extras: Internal power socket (120 V models) for operating devices like shakers or stirrers inside the chamber Internal glass viewing door and optional internal lighting for observing samples without opening the chamber RS‑232 interface for data logging and connectivity Stackable design without tools—efficient laboratory space use Safety & Maintenance Alarms: Automatic over- and under-temperature alert system protects sample integrity Security Model (IMH180‑S): Adds a lockable outer door and audible alarms for door‑open conditions Includes a certified 140 °C decontamination cycle (about six hours) to sterilize the chamber without needing an autoclave—ideal for high‑sterility environments Gedsxhd Ixspfx Aacjkc Dimensions & Electrical Specs Feature Specification Exterior (W × D × H) 64 × 74 × 92 cm (25.2 × 29.1 × 36.2 in) Interior (W × D × H) ~46 × 54 × 70 cm (18.3 × 21.4 × 27.9 in) Weight ~70 kg (154 lb) Electrical (120 V) 1,020–1,390 W; 8.5 A at 60 Hz Materials Stainless steel (interior), durable housin