Used Auto Hacksaw for sale (5,800)

Condition: excellent (used), -Dimensions: 610x780x1410mm -Production: 12-40L per hour -Serial number: 1807850/2350 -Year: 2008 -Voltage: 400V -Power: 4.6kW -Weight: 280kg Lodpfewxu Sfox Afqorl This pasteurizer stirs, heats, cooks, pasteurizes, cools, matures, freezes, and preserves your recipes in a single, fully automatic cycle managed by the AUTOFRIGOR programmable controller (comparable to Carpigiani, Bravo Tritico, etc.), without any transfer or handling, ensuring maximum hygiene. All stainless steel construction Model: PG 24.60 Cooling: Condensation per cycle: 4 to 10 Production: 12 to 40 liters per hour. Electrical power in kW (400/3/50): 5.2. Dimensions in cm (W x D x H): 61 x 78 x 141. Net/Gross weight in kg: 250/280.

Condition: excellent (used), Year of construction: 2020, overall weight: 160 kg, total length: 1,200 mm, total width: 800 mm, total height: 400 mm, Metal cutting Tooling SMW AUTOBLOK - RX4-ZSW Premium Line self centering extra compact Integrated cylinder Sealed body Lrodpfx Afeyi Tr Roqol Chip guard with coolant nozzles Stroke control with proxi switch Roller for in arm not included C type steady:Yes Min. Diameter:35 Max. Diameter:350 Length: 1200mm Width: 800mm Height: 400mm Weight: 160kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2011, cutting diameter 335 mm Lrsdpfx Afey Sbkhsqel saw band length 4400 x 34 x 1,1 mm table height 750 mm 550 mm 335 mm 550 x 335 mm 330 mm cutting speed 320 x 335 mm down speed 200 mm dimensions of saw-band 200 x 335 mm workpiece weight 15 - 150 m/min 3,0 kW work height max. 1500 kg connected load 2400 x 2200 x 1900 mm Equipment: - Automatic feed unit - Material end Light barrier - Clamping pressure regulation for automatic machines - Manual saw blade tension - Laser light for cutting line display/scoring saws - Water spray gun

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeder Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-N200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 250 mm Bowl diameter (bottom): 190 mm Bowl internal height: approx. 45 mm Sorting track width: approx. 3 mm Overall height (drive + bowl with sorting track): 240 mm Power connection: 230 volts, 50 Hz - Conveyor spiral made of metal Space requirement Ø x H: 260 x 240 mm Weight: 13.5 kg Good condition Lsdpfxsy Tpttj Afqerl Matching control units with suitable connection plugs are available under stock numbers: 61867, 61866, 61856, 61858, 61889.

Condition: new, Year of construction: 2025, cutting diameter 335 mm saw band length 4400 x 34 x 1.1 mm table height 750 mm feed 5.0 - 2300 mm pro Hub capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 mm capacity 45 degrees: flat 320 x 335 mm capacity 45 degrees: round links 305 mm capacity 45 degrees: flat links 305 x 335 mm capacity 30 degrees: round 180 mm capacity 30 degrees: flat 170 x 335 mm 15 - 150 m/min workpiece weight max. 250 kg/m 3.0 kW 2550 kg 4350 x 2300 x 1900 mm - The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles Lodpfxjulnb Do Afqjrl - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Ljdeuzn Nnspfx Afqsrl Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: good (used), Year of construction: 2015, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm Lredpfx Asy I Da Refqol capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: ready for operation (used), BR-Automation 5PP120.1043-37A Power Panel, serial number as per photo, used, display foil damaged (see photo 2), otherwise normal signs of use, 100% functional, scope of delivery as per photos Lredpfx Afsi D Uh Isqsl

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Lredpoy Su A Rofx Afqol

Condition: used, Automatic Bag Filling Line Bag weights from 5kg to 1000kg Infeed with product de-clumper / product breakup breaker and sieve. Incline screw auger to high level hopper and mixer. Ledpfx Afsyq Tb Ieqorl Delivery system to bag filler where weighing takes place and metal detection before bag filling point. This system comes with a second mobile screw auger for filling 1000kg big bag / sacks Complete with all the controls for the smooth running of this bagging line. After Bagging the bags are sealed with a Saxon Bag Sealer and then stitched with a Singer Bag Stitcher.

Condition: not inspected (used), Year of construction: 2019, functionality: unexamined, machine/vehicle number: 10387A, input voltage: 400 V, type of input current: AC, Recently acquired through site purchase. Automatic robotic fruit packaging machine Utilizes three Staubli TS60 robotic arms See images for details Lsdoxcndgopfx Afqerl Buyer to arrange for collection Machine is not currently connected to services

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeder device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6,000 rpm Power supply: 230 Volt, 50 Hz Ljdpfjy N Dvbjx Afqjrl - The feeder was used for feeding automotive blade fuses Installation space required Ø x H: 420 x 390 mm Weight: 52 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which causes the sorting bowl to vibrate by mechanical oscillations, setting the parts in motion.

Condition: used, B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Components: 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Lrodpfek Abwljx Afqel Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany

Condition: used, Year of construction: 1996, Technical details: weight of the machine ca.: 1750 kg Ljdpevpt Eysfx Afqorl sawing motor: 2,2 kW total power requirement: 5 kW cutting speed: 17 - 90 m/min cutting diameter: 320 mm cutting range max.: 320 x 320 mm saw band length: 4.930 x 34 x 1,1 mm feed length: max 9x 600 mm dimensions of the machine ca.: 2,6 x 2,4 x 1,40 m Bandsaw automatic, straight cut, min. cutting diameter 10mm, min. cutting length 6mm, min. offcut 15mm (automatic 80mm), max. weight of material 400kg/m, coolant box 60l, pump 16l/min, clamping pressure 20-60bar, dimensions: chipconveyor 2.400x 950mm roller track 2.200 x 950mm, 5pcs. saws (new) 4.930 x 34 x 1,1mm operating manual, *

Condition: new, Year of construction: 2021, New 4 Head Automatic Capper & Cap Feeder Never Used / New Model RCP-141 To include Capper Feeder & automatic capper machine Lrodpov R I D Hsfx Afqel

Year of construction: 2004, condition: used, Automatic bar feeder for diameters from 6 to 45 mm and a maximum bar length of 3,300 mm. CE compliant, complete with manuals and certification. Lodpfx Afjww Hx Isqsrl

Condition: used, Year of construction: 2004, The used TOP AUTOMAZIONI X-FILES automatic bar feeder is a valid alternative to the more traditional bar pusher for performing unattended bar machining on production CNC lathes. Multilayer, year of manufacture 2004, CE compliant; maximum bar diameter: 75mm maximum bar length: 3300mm Ledpfex Nqi Iox Afqsrl

Condition: excellent (used), Year of construction: 2007, AMADA LKI MP 300 LOAD UNLOAD AUTOMATION Year 2007 Lsdpfx Asyylqbsfqjrl LKI MP 300M automatic sheet loader / manipulator with 3000mm x 1500mm sheet capacity.

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display Lredjyc H N Njpfx Afqsl • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic Lredpfx Asxabavsfqel * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the start of the cut position - Manually operated band tension control with indication on the display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed

Condition: new, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2 mm cutting diameter minimum 5 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MPE CNC total power requirement 2,2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than Lrodpfoxaa Ewsx Afqel 300 mA.

Condition: ready for operation (used), Year of construction: 2007, cutting diameter 320 mm saw band length 3400 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 400 mm capacity 45 degrees: flat LI 320 x 280 mm capacity 45 degrees: flat RE 320 x 260 mm capacity 60 degrees: flat RE 320 x 140 mm band speed 35 + 70 m/min work height max. 930 mm voltage 400 V total power requirement 2.67 kW weight 950 + 250 kg well-maintained condition (!!) current new price incl. accessories ~ 40.000 Euro special price on request - in checked conditions - machinevideo - ?v=AHgMDxAcpgE Equipment: - electro-hydraulic vertical mitre bandsaw - with large cutting range and small footprint - Robust material support table - miter cuts are carried out fully automatically * electro-hydraulic miter adjustment left right - Up to 99 cutting programs - Central operation of all machine functions from the front - Loading also possible from above - Precise positioning thanks to accurate measuring system - electro-hydraulic miter adjustment left right - Electro-hydraulic material clamping - electro-hydraulic infeed from the saw arm * steplessly adjustable (cutting pressure control) - Operating instructions (PDF) Lodpfx Afsym D Dreqjrl * Special accessories included : - BAUER material feed unit - Micro-dosing device (spray oiler)

Condition: excellent (used), Year of construction: 2008, For sale is a salt spray chamber designed for straightforward testing of the corrosion resistance of metal parts and coated surfaces. Within the enclosed chamber, components are exposed to a fine salt mist to reveal corrosion under realistic conditions. The system is clearly arranged and suitable even for users without specialized knowledge. The salt spray chamber is fully functional (still in operation) and in well-maintained condition. Key specifications can be found in the attached images. Ledpfx Afox Uz Hheqerl

Condition: new, Autobag bags are available for sale in the following sizes: 150x250 1.5 million bags 200x320. 2.5 million bags Price Euro Palette 1 Pallet 0.02€ x Bag 2 Pallets 0.019€ x Bag 3 Pallets 0.018€ x Bag 4 Pallets 0.017€ x Bag Lrodpfx Asu Ni Rpsfqel 5 Pallets 0.016€ x Bag and so on 10 and more 0.01€ Bag 1 million Autobag bags from 0.01€ each

Condition: like new (used), Year of construction: 2023, This machine is tailor-made for businesses seeking a simple and reliable packaging solution. The maximum speed is up to 1,500 bags per hour. Operation is easy, requiring just two simple steps: filling the bag from the top and sealing the bag. For sale: Autobag bags in the following sizes: 150 × 250 – 1.5 million bags 200 × 320 – 2.5 million bags Price for full Euro pallet: Lodpfx Aor E Dpzefqjrl 1 pallet: €0.025 per bag 2 pallets: €0.019 per bag 3 pallets: €0.018 per bag 4 pallets: €0.017 per bag 5 pallets: €0.016 per bag and so on 10 or more pallets: €0.01 per bag From 1 million Autobag bags: from €0.01 each Currently reserved.