Used Ath W42 for sale (3,594)

Year of construction: 2023, condition: new, functionality: not functional, machine/vehicle number: 75010; 75011, We offer two ElectraTherm AC800 ORC units for generating electricity from waste heat, including two external LU-VE air coolers. The units were manufactured in 2023 and are installed at the premises of EKOLOGIE s.r.o. (ekologiesro.com) in Rynholec, Czech Republic. They are in new, unused condition and have never been put into operation. The equipment is available immediately; dismantling will be handled by the seller. TECHNICAL DESCRIPTION The equipment operates on the principle of an organic Rankine cycle (ORC). The AC800 design is based on the PM75 series and utilizes a modified internal hydraulic circuit that allows for independent cooling of the outlet heat to the desired parameters. EQUIPMENT IDENTIFICATION • Manufacturer: ElectraTherm, by BITZER Group • Commercial designation: AC800 Fsdpe Ag N T Iefx Aikjpp • Model according to the nameplate: ET75B • Manufacturing design: AC800-IP • Serial numbers: 75010 and 75011 • Year of manufacture of both ORC units: 2023 TECHNICAL DATA ACCORDING TO THE NAMEPLATES • Maximum gross electrical power of the generator: 75 kW per unit • Total maximum gross power of both units: 150 kW • Electrical system: 400 V, three-phase, 50 Hz • Operating range of hot water temperature: 65–115 °C • Maximum hot water flow rate: 83 m³/h per unit • Working fluid: R245fa • Nameplate weight "Tare Weight": 2,979 kg per ORC unit, excluding the external cooler • Maximum nameplate power consumption: 11.2 kW for unit 75010 and 11.5 kW for unit 75011 The stated electrical powers are the maximum gross values of the generators. The actual power depends on the conditions of the heat and cooling sources; the net power of the entire installation also depends on the consumption of auxiliary equipment. SCOPE OF SUPPLY • 2× ElectraTherm AC800 ORC unit • 2× external LU-VE air cooler, each with six fans External pumps, separate external heat exchangers, or connecting pipes are not included in the sale. These parts must be procured separately by the buyer. External pipes and other peripheral technologies shown in the photos are not included in the offer. SALE AND AVAILABILITY • Preference is given to selling both sets together; selling one set can be discussed • Price is negotiable • The seller is a VAT payer; the offered price is stated excluding VAT • Availability: immediately • Dismantling will be handled by the seller • Location: Rynholec, Czech Republic The attached brochures present the AC800 model series and the base ORC module PM75, from which the AC800 design is derived. The PM75 sheet serves as supplementary technical information. The specific parameters of the offered AC800 units are stated in this advertisement and in the photos of their nameplates. The scope of supply corresponds exclusively to the description of the offer.

Year of construction: 2005, condition: excellent (used), HYUNDAI-KIA SMART TURN SKT 250MS CNC LATHE MAKE HYUNDAI KIA, MADE IN SOUTH KOREA MODEL SKT 250 MS YEAR 2005 CONTROL FANUC 18 IT SWING OVER BED 620.0 mm SWING OVER CROSS SLIDE 400.0 mm MAX TURNING DIA 410.0 mm MAX WORK LENGTH 700.0 mm TRAVEL X AXIS: 290.0 mm Z AXIS: 750.0 mm B AXIS 700.0 mm Fpedpfep T Ulzsx Aikjp RADPI FEEDS X AXIS: 20 m/min Z AXIS: 24 m/min B AXIS 20 m/min SPINDLE SPEED 3,500 RPM SUB SPINDLE SPEED 4,000 RPM SPINDLE NOSE A2-8 SUB SPINDLE NOSE A2-6 SPINDLE POWER 18.5/22 kW SUB SPINDLE POWER 7.5/11 kW BAR DIA 82.0 mm BAR DIA SUB SPINDLE 65.0 mm TURRET 12 STATIONS PLUS C AXIS B AXIS PARTS CHATHCHER TOOL SETTING PROBE SWARF CONVAYOR

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Complete MECATHERM line from 2011, consisting of an H1 volumetric divider and an RT2 shaping unit with an integrated pre-fermentation and resting system. Industrial line designed for the automated production of baguettes, long loaves, and other bakery products, depending on the shaping equipment used. Line composition: - MECATHERM H1 volumetric divider - Complete MECATHERM RT2 shaping unit - Integrated pre-fermentation and dough resting system - Shaping and elongation system - Automatic depositing system onto trays - Several additional shaping accessories and equipment - Conveyors and connecting equipment Fpedpfx Aijz Sfa Dskep Features: - Manufacturer: MECATHERM - Year: 2011 - H1 divider capacity: up to 2,500 pieces/hour, depending on the weight - Production adapted for baguettes and various loaf sizes - Automated line from dividing to depositing onto trays Complete line sold with numerous accessories. Additional information and video available upon request.

Condition: used, Year of construction: 2005, functionality: unexamined, HOLZMA OPTIMAT HPP 380/43/31/L, year of manufacture 2005. Horizontal panel dividing saw. - Cutting length 4,300 mm - Cutting width / program carriage travel 3,100 mm - Saw blade projection 95 mm - Main saw motor 13.5 kW, scoring saw motor 2.2 kW - Saw carriage feed 5–130 m/min - Power Control PC with CADmatic 4.0 - 7 clamping devices and 4 air cushion tables - Power-Loc and motor-adjustable scoring saw - Automatic cutting length limitation and variable pressure bar control Fodpfs Ai Ehhex Aikepp - Laser guide light and label printer PICA 104 - Grooving, cutout, and stress-free cutting programs - 400 V / 50 Hz, connected load 20 kW, working height 920 mm SchnittProfit / external cutting optimization is not included in the scope of supply. Location: Offenburg, Germany. Dismantling scheduled for December 11, 2026. Availability and handover after scheduling an appointment. Price on request. Technical specifications according to available documentation; current scope of supply and condition after consultation. Inspection, loading, and transport by arrangement. Contact: DS-Maschinen – Owner David Schulz. Subject to changes and errors.

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 23,000 h, Machine is in good condition. All Basic operations are functional. Ready for use Fjdpfxozam Dzj Aikepp

Condition: used, machine/vehicle number: 3045, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Manufacturer: Matra Model: MD40 Machine Type: Pull and lead spindle lathe Machine Weight: approx. 4.8 t Working Area Turning diameter over bed: 870 mm Turning diameter over carriage: 520 mm Turning length: 2,100 mm Turning diameter in the pit: 1,080 mm Pit length: 430 mm Spindle Speed stages: 24 Speed range: 8–1,000 rpm Spindle bore: 103 mm Slides and Travels X-axis: 1,830 mm X²-axis: 160 mm Fode Aa Az Sjpfx Aikjpp Y-axis: 415 mm Compound slide travel: 450 mm Top slide travel: 160 mm Feeds Longitudinal feed stages: 104 Longitudinal feed: 0.1–61.6 mm/rev Longitudinal feed: 0.0038–2 19/64 in/rev Cross feed stages: 104 Cross slide feed: 0.3–18.4 mm/rev Cross feed: 0.0012–47/64 in/rev Rapid traverse longitudinal: 5,140 mm/min Rapid traverse cross: 2,570 mm/min Thread Cutting Thread pitches: 72 Metric thread pitch: 0.5–240 mm Inch thread: 60–1/8 threads/inch Module thread: 0.125–60 mm Tailstock Tailstock cross travel from center: 10 mm Arbor mount: MK 6 Arbor stroke: 280 mm Electrical Data Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Rated current: 30 A Fuse rating: 50 A Total power consumption: 13 kW Dimensions Footprint: approx. 4.1 × 1.5 × 1.9 m EQUIPMENT Original Forkardt F400 3-jaw chuck Removable bridge Original MiniWizard 2-axis digital display 3 glass scales Multifix quick-change tool holder Swiveling spindle guard with safety switch 2 safety emergency stop buttons Lockable main switch Important note: The machine vises and the steady rest visible in the pictures are not included in the scope of sale and delivery!

Condition: excellent (used), HANKOOK VTC160E FANUC 32IA - YEAR NEW - ORIGINALLY BUILT 2013 MACHINE SN 44G09758 HEAVY DUTY HIGH PERFORMANCE, ELEVATING CROSSRAIL, RAM TYPE CNC VERTICAL TURNING MACHINE WITH HARDENED & GROUND BOX GUIDEWAYS, C-AXIS & DRIVEN TOOLS. MACHINE CONSTRUCTION & FEATURES  HEAVY-DUTY CAST-IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HEAVY DUTY HARDENED & GROUND SLIDEWAYS TO PROVIDE INCREASED STABILITY & RIGIDITY.  2 STEP AUTOMATIC GEAR CHANGE.  24 POSITION TOOL MAGAZINE (12 MILLING & 12 TURNING). INCLUDED FACTORY FITTED MACHINE OPTIONS • HYDRAULIC 3-JAW & MANUAL 4-JAW COMBINATION CHUCK WITH4 MANUAL ADJUSTABLE JAW BODIES • CHIP CONVEYOR & CHIP BUCKET • 20 BAR THROUGH SPINDLE COOLANT SYSTEM • MEASUREMENT SYSTEM C-AXIS SCALE • TRANSFORMER (CE SPECIFICATION) • AUTOMATIC TOOL SETTING DEVICE • TOOL SETTING DEVICE • X-AXIS LINEAR SCALE • Z-AXIS LINEAR SCALE • RENISHAW PART PROBING SYSTEM • EXTENDED X-AXIS CROSSRAIL TOOLING INCLUDED • CENTERLINE TOOLCHANGEABLE ANGULAR MILLING HEAD WITH • SELECTION OF TOOLHOLDES & BORING BAR HOLDERS CAPACITY Maximum Turning Diameter Ø 2,000 MM Maximum Turning Height 1,400 MM Maximum Torque 17,800 NM Maximum Cutting Force 3,000 KGF Maximum Workpiece Weight 10,000 KGS TABLE Table Diameter Ø 1,600 MM Table Speed 0.7 ~ 280 RPM Table Speed Range AUTOMATIC 2 STEP TABLE C-AXIS Minimum Index Angle 0.001° C-Axis Cutting Feed rate 0 ~ 900 DEG / MIN Max. C-Axis Speed 3.0 RPM RAM HEAD Tool Size 32 MM² Spindle Taper ISO 7/24 #50 Ram Cross Section 220 x 220 MM MILLING SPINDLE Milling Spindle Speed 30 ~ 3,000 RPM Max. Milling Spindle Torque 235 NM TRAVEL & FEEDRATE X-Axis Travel (Saddle Horizontal) 1,900 MM Z-Axis Travel (Ram Vertical) 900 MM Maximum X / Z-Axis Cutting Feed rate 3,000 MM / MIN X / Z-Axis Rapid Feed rate 7,500 MM / MIN ATC Type of Tool Holder MAS BT 50 Tool Magazine Capacity 24 (12T & 12M) Max. Tool Weight 70.0 KGS MOTOR Table Motor (Cont. / 30 Min) AC 37.0 / 45.0 KW Milling Spindle Motor Power 15.0 / 18.5 KW X / Z-Axis Servo Motor AC 7.0 KW C-Axis Motor 7.0 KW POWER SOURCE Input Power Supply 415V / 50HZ / 3PH Power Capacity 110 KVA DIMENSIONS & WEIGHT Height 5,035/5,535 MM External Width (With Chip Conveyor) 7,090 MM External Depth 4,625 MM Weight 30,900 KGS Fpedpfxj Afm Nqj Aikop STANDARD SUPPLIED MACHINE FEATURES • Fanuc 32iA Control System • Through Tool Coolant • Table, Servo Drives & Motors • Through Spindle Coolant • 4 Jaw Independent Manual Chuck • Splash Guard & Safety Guard Rail • Automatic Tool Change System • X-Axis Slideway Protect Steel Cover • Lubrication Oil Cooler • Work Light • Hydraulic Power Unit • Patrol Lamp (Red, Yellow & Green) • Automatic Guideway Lubrication System • NC Power Off • Coolant System & Wash Gun • Chip Pan • Electrical & Mechanical Manuals • Levelling Blocks

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 Fedpsy Nfqmsfx Aikopp 3 Phase Electrics Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 82397, type of input current: three-phase, welding current (max.): 420 A, Equipment: type plate available, MERKLE Insquare W 421 AC/DC water-cooled TIG welding system Manufacturer: MERKLE Model: Insquare W 421 AC/DC Year of manufacture: 2012 Serial number: 82397 Description For sale is a powerful AC/DC TIG welding system from MERKLE with water cooling. This system is suitable for professional welding applications on steel, stainless steel, aluminum, and other non-ferrous metals. The AC/DC technology allows for both DC and AC welding, covering a wide range of applications. With a welding current of up to 420 A, the system is ideal for industrial use in metal, tank, plant, and pipeline construction. The water cooling ensures continuous and reliable operation, even at high welding currents. Technical data Manufacturer: MERKLE Type: Insquare W 421 AC/DC Year of manufacture: 2012 Welding current range: 5 – 420 A AC frequency: 50 – 200 Hz Open-circuit voltage: 80 V Mains connection: 400 / 415 V, 50 / 60 Hz, 3~ Duty cycle at 40 °C: 420 A at 40 % 360 A at 60 % 310 A at 100 % Protection class: IP23 Water cooling Standard: EN 60974-1 Scope of delivery MERKLE Insquare W 421 AC/DC Water cooling TIG torch Ground cable Foot pedal Fedozamffopfx Aikepp All information is subject to change without notice.

Condition: used, This listing is for a Thermo Scientific Heratherm IMH400-S Incubator. The unit is in full working condition and ready for immediate use. Advanced gravity convection technology ensures stable temperatures. Power-On Verified. The Thermo Scientific Heratherm IMH400-S is a high-performance microbiological incubator designed for delicate samples. It features a stainless steel interior, intuitive interface, and exceptional temperature uniformity. Ideal for research and clinical labs requiring reliability and precision. Fpedpfexzh H Ejx Aiksp Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) • Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: excellent (used), Year of construction: 1995, operating hours: 50,000 h, functionality: fully functional, machine/vehicle number: 0,4-3, conveyor belt thickness: 3 mm, coil weight: 20,000 kg, conveyor belt width: 1,500 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness steel (max.): 3 mm, blade shaft diameter: 160 mm, sheet thickness (max.): 3 mm, number of blades: 15, type of input current: DC, load capacity: 20,000 kg, space requirement height: 3,000 mm, feed roller diameter: 510 mm, Longitudinal slitting line for strips with a thickness from 0.4 mm to 3 mm. Decoiler 20 tons, diameter 510 mm / 610 mm, recoiler diameter 510 mm / 15 tons. The line is operational and can be tested. Operator training can be provided. Decoiler purchased in 2015, made in China. Recoiler purchased in 2021, manufacturer Poland. New electronics and new control system in 2021, manufacturer Poland. Fedpfx Aioynuwlekopp

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Fpedozav D Depfx Aikjp Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, total width: 2,100 mm, total height: 2,500 mm, total length: 6,000 mm, type of input current: three-phase, input voltage: 380 V, overall weight: 5,000 kg, power: 11 kW (14.96 HP), input frequency: 50 Hz, In working condidion, el motor is replaced with the smaller one for efficiency Fpjdpfx Aiozi A Iyeksp

Condition: used, Year of construction: 2000, turning diameter . mm turning length . mm control 2x 840 D Fjdpfeqn A Rnex Aikjpp Kühlmittelsystem chip conveyor ja kW generator - rated current 95,00 A connected load 65,00 kW

Condition: new, Year of construction: 2026, Drum chipper series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Fpsdpfxowbv Ers Aikep Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Fjdpfx Aoyaywhoikepp

Condition: refurbished (used), total height: 1,050 mm, total length: 850 mm, total width: 620 mm, spindle speed (max.): 2,500 rpm, type of input current: three-phase, grinding wheel diameter: 175 mm, overall weight: 350 kg, rotational speed (max.): 2,500 rpm, grinding spindle motor power: 750 W, input frequency: 50 Hz, input voltage: 400 V, year of last overhaul: 2026, warranty duration: 24 months, For sale: fully overhauled, high-precision Agathon 175-A tool sharpener Fjdpfx Aioz R Darskepp Accessories included with the machine: - 2 new Diametal MD16 and D91 grinding wheels - Centralized automatic spindle lubrication - 1 articulated arm LED lamp, CCEA - 1 fixed table - 1 PET rear guard - 1 PET front guard - 1 new electrical unit, CE compliance certificate - 1 frequency converter for adjusting the spindle speed Machine price: CHF 19,900,- (excluding VAT)

Condition: used, Daewoo Puma 12S-3A CNC Turning Centre Year: 1996 Fanuc Series O-T CNC Control C-Axis Spindle Live Tooling 12 Station Servo Turret Hydraulic Chuck Swing Over Bed: 570 mm Maximum Turning Diameter: 430 mm Maximum Turning Length: 770 mm Serial Number 3P100044 90 mm Bar Capacity 91 mm Spindle Bore A2-8 Spindle Nose Fpodpfxszrt Dwo Aikjp Spindle Speeds: 25–3,000 rpm 18.5/22 kW AC Spindle Motor X Axis Travel: 260 mm Z Axis Travel: 800 mm Rapid Traverse: X 20 m/min, Z 24 m/min Automatic Lubrication Coolant System Swarf Conveyor Fully Enclosed Splash Guarding

Condition: excellent (used), HOLZ-HER TRIATHLON 1486 V – Industrial Edge Banding Machine For sale: a professional, industrial single-sided edge banding machine from the German company HOLZ-HER, model TRIATHLON 1486 V. Fjdpfo Ahlyrsx Aikopp Identification data: Manufacturer: HOLZ-HER Model: TRIATHLON 1486 V Year of manufacture: 2003 Identification number: 172-0312 Machine number: M 109 Type: industrial single-sided edge banding machine Equipment and machining capabilities: pre-milling unit, gluing station, edge trimming units, cutoff saws, corner rounding unit, profile sanding unit, oscillating unit, polishing brushes, programmable control with operator panel. The machine is designed for industrial edge banding of furniture panels and carpentry elements. Technical condition: The machine is in good working order. It can be inspected before purchase.

Year of construction: 2005, condition: like new (used), We have a Buhrs ITM CS400 servo gathreing section available. Is your current machine to short? With this gathering section you will get 6 stations extra directly. Fpjdpomuzuaofx Aiksp Year of built 2005 but not used that often. We do selll this gahering section after complete maintenance and with maintained feeder. You have the choice between rotary and fiction feeders which you can place on the base.

Condition: used, Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 87 mm, turning diameter: 380 mm, turning length: 1,000 mm, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, travel distance X-axis: 190 mm, travel distance Z-axis: 1,090 mm, VICTOR VTURN-26 / 110 – LIVE TOOLING - Manufacturer: Victor - Model: Vturn-26 / 110 - Year: 1998 - Machine Type: CNC Turning Center with Live Tooling Fedpfx Ajzvfrujikepp - Number of Axes: 3 (X / Z / C) - C-Axis: Included - Live Tooling: 8 Driven Tools - Bar Feeder: Included - X-Axis Travel: Approx. 190 mm - Z-Axis Travel: Approx. 1,090 mm - Maximum Turning Length: Approx. 1,000–1,100 mm - Swing Over Bed: Approx. 520 mm - Maximum Turning Diameter: Approx. 380 mm - Spindle Speed: Up to 3,500 rpm - Spindle Nose: A2-8 - Bar Capacity: Approx. 75 mm - Spindle Bore: Approx. 87 mm - Spindle Motor Power: Approx. 18.5 kW - Turret: Live Tool Turret - Machine Dimensions: Approx. 4,400 × 1,700 × 1,900 mm - Machine Weight: Approx. 6,000 kg - Bar Feeder: Included

Condition: used, Year of construction: 1986, serial number 7175455 3 Backenfutter Durchm. 30 tool taper ja turret head für 6-fach-Belegung centre distance ca. 700 mm turning diameter max. ca. 450 mm Control FANUC dimensions of the machine ca. 3.000 x 2.000 x 2.200 mm Fpedpfjx U A Tcex Aikjp

Condition: used, Year of construction: 2005, Machine, and good Condition Fpsdpfs Aiw E Esx Aiksp Inspektion in our warehouse

Condition: excellent (used), Year of construction: 2018, operating hours: 1,700 h, functionality: fully functional, travel distance X-axis: 3,370 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, feed length X-axis: 90,000 mm, feed length Y-axis: 60,000 mm, feed length Z-axis: 40,000 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 40 m/min, controller manufacturer: Osai, controller model: Open, spindle speed (max.): 24,000 rpm, spindle motor power: 8,500 W, number of spindles: 1, number of slots in tool magazine: 12, type of input current: three-phase, Equipment: documentation/manual, ATHENA 3015, a 5-axis machining center for the processing of composite and plastic materials. Fpedpfxjz Dtx Ae Aikop

Condition: defective spare-parts repository (used), Year of construction: 1990, functionality: not functional, turning length: 600 mm, turning diameter: 300 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 670 mm, spindle motor power: 11 W, rotational speed (min.): 3,500 rpm, total length: 2,620 mm, total width: 1,480 mm, overall weight: 4,000 kg, bar passage: 65 mm, spindle nose: MT-NO.7, Equipment: documentation/manual, DAINICHI F25 CNC turning center, manufactured in Japan. A robust and reliable CNC lathe suitable for precision turning and general production applications. The machine features a rigid construction, hydraulic chucking, and automatic tool changing, making it suitable for both small and medium production runs. The machine is available for inspection and can be demonstrated upon request. TECHNICAL SPECIFICATIONS CNC control: FANUC CNC turning center Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 600 mm Swing over bed: approx. 500 mm Spindle bore: approx. 65–77 mm* Spindle speed: up to approx. 3,000–3,500 rpm* Turret: automatic turret, 10 stations* Hydraulic chuck Hydraulic tailstock Coolant system Chip conveyor *Specifications to be confirmed according to the individual machine configuration. ADVANTAGES DAINICHI, Japanese machine construction Fjdezwdqrspfx Aikopp Robust and rigid CNC turning center FANUC CNC control Hydraulic chuck and tailstock Suitable for general turning and production work Machine available for inspection Immediate availability < < < THE MACHINE HAS A FAULT ON THE REGULATOR AND IT IS NOT FUNCTIONAL. IT CAN BE REPAIRED OR USED FOR SPARE PARTS. > > > IT HAS AN ALMOST NEW 3-JAW CHUCK.