Used Ath W42 for sale (3,594)

Condition: good (used), Year of construction: 1987, Wood Lathe DHG 400/1000 Length: 1000 mm Fpsdpfxow Hl Ade Aikjp Motor power: 0.75 kW Voltage: 220 Volt 6 spindle speeds: 180/300/400/700/1400/2800 rpm Weight: 70 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2008, turning height: 1,500 mm, workpiece weight (max.): 20,000 kg, total height: 6,700 mm, total width: 6,300 mm, total length: 9,300 mm, rotary table diameter: 2,000 mm, spindle speed (max.): 200 rpm, table diameter: 2,000 mm, travel distance X-axis: 1,835 mm, travel distance Y-axis: 1,000 mm, workpiece diameter (max.): 2,400 mm, overall weight: 48,000 kg, Equipment: documentation/manual, X Stroke 1835 mm Z Stroke 1000 mm Table load 20 Ton Ram size 230 x 230 mm   Stroke crossrail 800 mm  Stroke crossrail in 5 steps each 200 mm Live tools 2000 Rpm Power live tools 15 kW ATC 18 station max L = 450 mm Taper BT50 BIG PLUS Full C-Axis 360.000   Under power in AEROSPACE precision plant 2020 Table bearing replaced 2020 Ram bearing replaced Fedpfx Aiev R Di Sekspp 2025 new chip conveyor Max. turning Ø: 2400mm Table Ø: 2000mm ATC / revolver: 18 Speeds / ranges: 200Rpm Power: 48kW Maximum turning height:1500mm C-Axis: 360000° Length: 9300mm Width: 6300mm Height: 6700mm Weight: 48000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 170 mm, center height: 170 mm, turning length: 700 mm, spindle speed (max.): 2,350 rpm, Emcomat 17 S Spindle bore: 50 mm Turning diameter over bed: 340 mm Turning diameter over support: 170 mm Center distance: 700 mm Maximum 2350 rpm. Lathe features longitudinal and cross feeds. Digital two-axis position readout. Equipped with emergency stop and chuck guard. Year of manufacture: 2002 5.3 kW 400 V Fpsdpfoxp Hudex Aikop

Condition: used, This listing is for the Grant JB2 Unstirred water bath without lid The unit is in full working condition and is ready for immediate use Fpsdpfx Aisxhgdvskjp The Grant JB2 series of unstirred water baths are reliable, general-purpose laboratory devices ideal for sample warming, media preparation, and quality control. Available in different capacities and configurations, they are especially suited to educational, clinical, and light industrial use.

Condition: used, Year of construction: 1999, turning diameter over bed 330 mm turning diameter over slide rest 195 mm turning length 750 mm center height over bed 160 mm centre distance 650 mm digital readout 3 Achsen HEIDENHAIN bed width 205 mm spindle bore 36 mm spindle taper KK5 DIN 55027 turning speed range 48 - 2500 U/min power requirement 3,0 kW 4-jaw-chuck diameter 160 mm quick change toolholder MULTIFIX Typ A taper in tailstock-quill MK 3 dia. of quill 40 mm quill stroke 100 mm voltage 400 V total power requirement 3,2 kW weight of the machine ca. 680 kg dimensions of the machine ca. 1,60 x 0,80 x 1,55 m - Serial-No.: 4432 - HEIDENHAIN 3-axis digital readout Fjdpfxjzy Sb De Aikepp - MULTIFIX quick-change tool holder - Collet chuck including collets Ø 8 - Ø 27 mm - Face plate Ø 250 mm - Quick-action drill chuck - Center point

Condition: used, total length: 3,700 mm, total width: 1,650 mm, total height: 190 mm, Year of manufacture: 2001 Colour: White Empty weight: 3.300 kg - Year: 2001 - Documentation available: Yes - CE marking present: Yes - Serial number: 291/01 - Drive system: Teach-in - Control system type: Monforts Control System MTC K - Power [kW]: 15.0 - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 290 - Distance between centres [mm]: 1500 - Bed width [mm]: 365 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 2 - Max. spindle speed [rpm]: 2800 - Options: Quick-change tool post, Fixed steady, Digital readout, Three-jaw chuck - Transport dimensions: 3700mm x 1650mm x 190mm (l x w x h) - Transport weight [kg]: 3300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fjdezhuvgspfx Aikopp Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, High Speed Elevating Rail Vertical Boring Machine with Power Indexing Turret & Copying Attachment. Four Jaw Chuck Size 48" Diameter. Table Swing 60" Diameter. Fjdozy Ik Ispfx Aikepp Max Height Under Cross Slide 60" Turret Rise & Fall 36" Speeds 10.5 - 234 rpm With 4 Sets of Chuck Jaws, Equipment, Chuck Guards & Newall Digital Readout System.

Condition: used, Colchester Magnum 1250 Gap Bed Centre Lathe. Distance Between Centres 4000mm (157"). Swing Over Bed 635mm (25"). Swing In Gap 900mm (36"). Spindle Bore 118mm. Spindle Speeds 6.3 - 1250rpm. Leadscrew 2 TPI. Rapid Power to Saddle & Cross Slide. Quick Change Tool Post & Holders. 3 & 4 Jaw Chucks. Fedpfx Aiszy Im Nekspp 3 Point Roller Bearing Steady. Newall DP 700 Digital Readout & Tooling. Weight Approx: 6000KG

Condition: used, Broadbent - Schofield Gap Bed Centre Lathe. Distance Between Centres Approx 5M (16ft). Swing Over Bed 35". Fjdpfezy Ipqjx Aikopp Swing in Gap 55". Spindle Bore 4 1/2". Spindle Speeds 7 - 500rpm. Leadscrew 2 TPI. Taper Turning Attachment. Bison 800mm Diameter 4 Jaw Chuck. Fixed 3 Point Roller Bearing Steady. Digital Readout & Tooling & 2 Rear Splash Guards.

Condition: good (used), Year of construction: 2010, operating hours: 5,750 h, functionality: fully functional, turning length: 393 mm, turning diameter: 200 mm, spindle bore: 51 mm, MSX 853 cnc control 3-jaw chuck diameter 210mm 12-fold revolver C-axis driven tools tail stock coolant device chip conveyor Fpedszd S S Rjpfx Aikep Technische Daten: / technical details Drehdurchmesser / turning diameter 200 mm Drehlänge / turning lenght 393 mm X-Weg / X-travel 160 mm Z-Weg / Z-travel 450 mm max. Drehzahl Spindel / max. spindle speed 50-3000 UpM /rpm Eilgang X/Z / rapid feed X/Z 24/30 Anzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mm Antriebsleistung Spindel / drive capacity spindle 13,5 kW Gewicht ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, total length: 2,650 mm, total width: 1,150 mm, total height: 1,650 mm, Colour: Green Empty weight: 2.500 kg - Documentation available: Yes - Drive system: Conventional - Centre height [mm]: 225 - Swing over bed [mm]: 550 - Carriage turning diameter [mm]: 1600 - Distance between centres [mm]: 1050 - Bed width [mm]: 340 - Spindle bore [mm]: 52 - Min. spindle speed [rpm]: 46 - Max. spindle speed [rpm]: 1000 - Options: Digital readout, Four-jaw chuck, Three-jaw chuck, Quick-change tool post, Fixed steady, Removable bed - Type of digital readout: Heidenhain - Transport dimensions: 2650mm x 1150mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fsdpfjzzlg Asx Aikjpp Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: R0285, spindle bore: 70 mm, total length: 3,350 mm, total width: 1,550 mm, type of input current: three-phase, spindle motor power: 15 W, overall weight: 4,000 kg, workpiece diameter between centers: 290 mm, workpiece length between centers: 1,500 mm, CNC Lathe MONFORTS KNC 5 – 1999 For sale, a MONFORTS KNC 5 CNC lathe, year 1999, in very good overall condition. Ideal for precision turning operations, the manufacture of individual parts, as well as small and medium production runs. Technical specifications Brand: MONFORTS Model: KNC 5 Year of manufacture: 1999 Condition: Very good Color: White Weight: 3,300 kg Motor power: 15 kW Numerical control: Monforts Control System MTC K Programming: By teach-in Documentation: Available CE marking: Yes Machining capabilities Distance between centers: 1,500 mm Center height: 250 mm Maximum turning diameter above the bed: 500 mm Maximum turning diameter above the cross slide: 290 mm Spindle bore: 70 mm Spindle speed: 2 to 2,800 rpm Included equipment 3-jaw chuck FORKARDT F+250 Collet chuck, see photo Soft jaws and reversible jaws, see photo Fpsdj Agvttjpfx Aiksp Technical documentation Dimensions and transport Length: 3,350 mm Width: 1,550 mm Height: 1,800 mm Total weight: 3,300 kg Additional information Machine in very good condition Price shown excludes VAT – VAT is recoverable for eligible professionals, subject to applicable conditions. Machine can be viewed by appointment in Sprimont, Belgium. For any further information or to arrange a visit:

Condition: good (used), Year of construction: 2004, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, total height: 2,270 mm, total length: 5,400 mm, total width: 2,150 mm, overall weight: 6,000 kg, CNC Lathe with c-axis MORI SEIKI - NL 2500 SMC/1250 MACH-ID 9884 Make: MORI SEIKI Type: NL 2500 SMC/1250 Control: MAPPS YOP: 2004 Chip conveyor Coolant tank Full C-Axis 360.000 Live tools Tooling package optional KITAGWA Chuck on main Max. turning Ø: 356mm X-Axis: 260mm Z-Axis: 795mm Spindle bore: 80mm Speedrange: 4000Rpm Spindle power: 18.5kW Subspindle speeds:6000Rpm Subspindle bore: 80mm Fsdpfe Agu Rcjx Aikopp ATC / revolver: 12 Speed live tools:6000Rpm Chip conveyor: Yes Tool eye: Yes Length: 5400mm Width: 2150mm Height: 2270mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1981, faceplate diameter 3200 mm swing diameter 5100 mm turning height 2505 mm cross rail - adjustment 1500 mm max. ram stroke 1250 mm slide adjustment 2000 mm control Siemens 8 T Fsdou Sbdgepfx Aikjpp tool changer 16 STK table load 60 t faceplate turning speed range -stepless- 0,8-100 U/min feed 0,0 mm/min rapid traverse 6000 mm/min drive of main spindle 75 kW weight of the machine ca. 70 t dimensions of the machine ca. 9,3 x 6,1 x 6,0 m machine is in an excellent condition!! with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.

Condition: used, Year of construction: 2008, control SIEMENS - - - - - - - - - - - - - - - - - - CNC Lathe | INDEX - GU 600 The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! Fedpezz S Itefx Aikepp - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600

Condition: used, Year of construction: 2009, control SIEMENS Fpjdpezz S Iyjfx Aikep - - - - - - - - - - - - - - - - - - CNC Lathe | INDEX - GU 600 The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total height: 1,930 mm, total length: 6,000 mm, total width: 2,500 mm, type of input current: AC, overall weight: 3,850 kg, input voltage: 415 V, number of spindles: 1, Equipment: chip conveyor, documentation/manual, CNC Dugard Eagle 200 with multifeed bar feed, can be viewed working. Machine Type: 2 Axis CNC Lathe Control: Siemens 802D Condition: Very Good Includes Swarf Conveyor Multi feed auto bar feeder Tool setting probe 10 x Tool Holders Manuals Technical Specification Fedpfxo Afpvto Aikspp Max Part Diameter: 480mm Max Turning Diameter: 280mm Max Turning Length: 508mm Z Axis Travel: 520mm X Axis Travel: 176mm Spindle Pull Rod Diameter: 52mm Hole Through Spindle: 62mm Turret Positions: 10

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Manufacturer: WEISSER HEILBRONN Type: 29 Machine type: Lead and feed spindle lathe TURNING RANGE Turning diameter over bed: 420 mm Turning diameter over cross slide: 240 mm Turning length: 1,150 mm Center height: 210 mm SPINDLE AND FEEDS Spindle bore: 40 mm Longitudinal feed: 0.05–0.71 mm/rev Cross feed: 0.025–0.355 mm/rev TAILSTOCK Arbor size: MK 4 Fjdpfo Ad E H Sjx Aikepp Arbor travel: 195 mm MACHINE DETAILS Dimensions (L × W × H): 3,000 × 1,500 × 1,500 mm Weight: 1,500 kg

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Speed range: 19–2,000 min⁻¹ Turning length: approx. 1,500 mm Center height above support: 260 mm Turning diameter above support: approx. 520 mm Center height above support: 200 mm Turning diameter above support: 400 mm Spindle bore: 58 mm MACHINE DETAILS Manufacturer: Heidenreich und Harbeck Type: Hanseat Machine type: Lead and feed screw lathe Length: 8,000 mm Width: 1,000 mm Height: 1,600 mm Weight: 2,000 kg EQUIPMENT Tailstock Fpodpfx Aie Ad Hczoksp Multifix tool holder Three-jaw chuck, diameter 240 mm

Condition: new, Maximum turning height: 315 mm Turning diameter over the bed: 630 mm Turning diameter over the cross slide: 430 mm Turning diameter in the chuck: 830 mm Distance between centers: 3000 mm Spindle bore: 103 mm Spindle fitting, DIN 55027: Size 11 Bed width: 400 mm 21 speed ranges: 12.5 – 1250 rpm Feed range, longitudinal: 0.04 – 12 mm/rev Feed range, transverse: 0.02 – 6 mm/rev 64 metric threads: 0.5 – 120 mm 64 inch threads: 60 – 1/4“ 64 module threads: 0.125 – 30 module 64 diametral pitch threads: 240 – 1 pitch Tailstock fitting: MK 5 Tailstock quill travel: 230 mm Tailstock quill diameter: 75 mm Drive power: 11 kW Dimensions L x W x H: approx. 5100 x 1400 x 1300 mm Weight: approx. 4800 kg Accessories / Special Features: • 3-axis digital read system, manufacturer K+C • 3-jaw chuck, manufacturer BISON, Ø 315 mm • Quick-change tool holder system “Multifix”, Size C • Powerful main drive with 11 kW • Large spindle bore, Ø 103 mm • Traveling steady rest • Fixed steady rest, small • Fixed steady rest, large • Chuck • Rapid traverse in longitudinal and transverse direction • Electrodynamic brake • Coolant system • Machine light • Quick-change device for the tailstock • Bed stop • Protective shield, rear, full length • Tool holder protection Fsdpfxjk Dpxls Aikepp • Chuck protection, electrically secured • Lead and feed screw protection • Interchangeable gears • Fixed center for the spindle • Reducer sleeve for the spindle • Two colors: top light gray RAL 7035, bottom blue RAL 5015 • CE compliant Delivery time: approx. 2 months after order placement Delivery: ex works, manufacturer's plant in Bulgaria, free on board (FOB) truck Warranty period: 12 months, with single-shift operation (8 hours) Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1998, turning diameter max. 250 mm turning length max. 900 mm control FANUC SERIE 0-T turning spindle Durchlass 75mm chuck diameter 250 mm turning speeds 0-3700 U/min transmission ratio 2 tool numbers 12 Fpjdsucgxuepfx Aikop feed speeds X/Z 15/20 mm/min quill stroke 100 mm diameter of quill 110 mm tool adaptor MK 4 coolant tank 130 l weight - pallet system 5500 kg

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: TCG 160 x 5M, turning diameter over cross slide: 1,280 mm, spindle bore: 105 mm, turning diameter: 1,600 mm, disc diameter: 1,600 mm, LATHE AVAILABLE FROM STOCK The heavy double-guide lathe TCG is a universal machine tool that allows roughing and finishing turning, drilling, threading, turning cones, boring, heavy and very heavy objects with one clamping. The TCG lathe is a lathe for machining objects with diameters of 1600 mm. The construction system and rigidity of the structure allow turning with large chip cross-sections and ensure high smoothness with minimal ovalization of the workpiece. The machine is located in our company ZAK in Poręba ul. Zakładowa 2 (Poland) Fpodsvw Uu Sepfx Aikep We encourage you to submit inquiries.

Condition: used, Year of construction: 1971, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Work area Swinging diameter: 520 mm Swinging diameter over cross slide: 400 mm Swinging diameter in the chuck: 1,000 mm Turning length: 1,250 mm Spindle Spindle speed range: 11.2–1,120 rpm Performance data Total power consumption: 7 kW Machine weight: approx. 3.8 t Fodez S Euajpfx Aikepp Dimensions Space requirement: approx. 2.7 × 1.7 × 1.7 m EQUIPMENT 4-position tool holder with quick-change inserts Digital display

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Pinacho Lathe Type SE 200 Year 2023 Fjdpfx Aijzhw D Tekspp Fagor CNC Made in Spain Includes Tooling Includes Goggles Machine is like new; it has only 200 hours of use Exact Model: Pinacho SE 200-42 Ax1000/S1 Key Features: ✔ Only 200 hours of use ✔ Virtually new

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, Colchester Tornado Turning Center 3 Axes: X, Z, Y Model: Tornado 80 CNC: GE Fanuc Series 21i-T Year: 1998 Tornado Bar Feeder Colchester Model: MBF 1000 Fodpoz S U Euefx Aikepp