Used As 940 Sherpa for sale (8,840)

Condition: used, Year of construction: 2011, operating hours: 748 h, machine/vehicle number: 0300147215, Weights Empty weight: 7.286 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.100 cm Ledpfx Ajydupgsd Ajrk Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Max. horizontal reach: 677 m Transport dimensions (LxWxH): 5.54x1.2x2.01 Additional information Please contact PFEIFER GROUP for more information

Condition: new, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 3,600 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, hydraulics, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden. ClassicSpace, Mercedes PowerShift 3, domestic body, 1x comfort seat, 1x sleeper berth, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, auxiliary heating, air horn, ABS (anti-lock braking system), traction control (ASR), retarder, PTO (power take-off), differential lock, fog lights, work lights, beacon, leaf suspension, aluminum tank, roof hatch, green environmental sticker. Wheelbase: 3,600 mm. 7.5t front axle, planetary rear axle 13.4t, crown wheel 300, differential lock on both front and rear axles, electronic brake system with ABS and ASR, ABS can be deactivated, drum brakes on front and rear axles, electronic parking brake, secondary water retarder, condensate monitoring for compressed air system, front axle stabilizer, rear axle stabilizer, smoker's package, seat belt monitoring, lower bunk, residual heat utilization, auxiliary hot water heating, additional thermal insulation, PSM 2nd generation, pre-installation for toll detection, ClassicSpace, comfort locking system, light and rain sensor, offroad driving mode, Mercedes PowerShift 3, navigation system, Multimedia Cockpit, tank capacity: 290 l, skid plate under bumper, high performance engine brake, transmission oil cooling, MB 131-2c PTO pump. Fifth wheel height: 1,400 mm. Tipping hydraulics available at an additional cost of approx. €4,000! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Ljdsyt H T Njpfx Ad Asrk

Condition: excellent (used), mileage: 179,822 km, power: 478 kW (649.90 HP), first registration: 01/2013, fuel type: diesel, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: AdBlue, retarder, = Additional Options and Equipment = - Intarder - Tipping hydraulics - PTO (Power Take-Off) = Further Information = Transmission: MERCEDES, automatic Number of cylinders: 8 Engine displacement: 15,928 cc Unladen weight: 15,880 kg MOT (Technical Inspection): valid until 11/2026 Technical condition: very good Visual condition: very good MERCEDES-BENZ ACTROS 4165 V8 SLT 8X6 TITAN HEAVY DUTY TRACTOR UNIT PUSH AND PULL POWER 1000 TON EURO 5 L PACKAGE (CAN BE CONVERTED TO EURO 3 FOR EXPORT) V8 ENGINE 650 HP DRIVE 8X6 WHEELBASE 420 CM DIFFERENTIAL LOCKS FIFTH WHEEL + TRAILER COUPLING HYDRAULICS FOR LOWBED TRAILER LARGE 1000 L FUEL TANK BEHIND CAB TRANSMISSION + VOITH VIAB RETARDER CLUTCH RETARDER PUSH AND PULL CAPACITY 1000 TON!!! Lrodpfeya Ahcsx Ad Aok FRONT PUSH BUMPER EXTRA COOLING PACKAGE OIL AND AIR VALVES FRONT AND REAR TOOLBOXES CAB WITH ALL OPTIONS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Condition: new, Year of construction: 2025, Gildemeister 20 completely rebuilt to new condition -AC motor for production time control -AC motor for threading -GM-type soundproof casters -frequency converter for spindle speed programming -bar passage 20mm ,25mm , 28mm with integral loader Lrjdpfjfzk S Dox Ad Ask -Optional : X and Z axis NC cross slides, NC pickup with NC pickup slide -EC brand

Condition: new, sheet width 1050 mm plate thickness 3,3 mm pre-bending 3,0 mm roll diameter 90 mm min. dia. 130 mm total power requirement 1,1 kw weight of the machine ca. 570 kg dimensions of the machine ca. 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Lrjdjyv Nfbspfx Ad Aek Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, sheet width 1050 mm Ledpfx Adeyv I U Io Aork plate thickness 1,8 mm pre-bending 1,5 upper roll diameter 70 mm min. dia. 105 mm total power requirement 1,1 kW weight of the machine ca. 320 kg dimensions of the machine ca. 1700x700x1100 mm

Condition: excellent (used), mileage: 496,586 km, first registration: 05/2016, fuel type: diesel, axle configuration: 6x6, wheelbase: 4,200 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, AdBlue, Bluetooth, air conditioning, crane, cruise control, electric window regulation, fog lights, = Additional Options and Accessories = - 12 Volt connection - Aluminum fuel tank - Leaf suspension - Differential - Compressed air connection in the cab - EURO 6 - Speed limiter - Cup holder - Alloy wheels - Air horn - Radio/CD player - Sun visor - Power sockets 12V + 24V + 15A - Power take-off (PTO) = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,809 cc Axle configuration Front axle: Steered Rear axle 1: Twin tires Rear axle 2: Twin tires; Steered Weights Unladen weight: 18,820 kg Lrodpfxox N Saho Ad Ajk Payload: 14,180 kg Gross vehicle weight (GVW): 33,000 kg Functionality Lifting capacity: 5,290 kg Lifting height: 700 cm Crane: Palfinger Epsilon, year of manufacture 2016, mounted behind the cab Maintenance, History, and Condition MOT (Main Technical Inspection): New inspection upon delivery Technical condition: very good Visual condition: very good Warranty Warranty: 12 months

Condition: used, Year of construction: 2014, operating hours: 3,069 h, machine/vehicle number: 946221, Weights Empty weight: 6.700 kg Functional Mast: articulated arm Lifting capacity: 200 kg Lrodpfx Adsycpplj Ajk Working height: 1.500 cm Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Solideal Max. horizontal reach: 760 m Transport dimensions (LxWxH): 5.95x1.75x1.96 Additional information Please contact PFEIFER GROUP for more information

Condition: used, power: 127 kW (172.67 HP), fuel type: diesel, lifting height: 20,600 mm, Year of construction: 2012, operating hours: 8,318 h, Technical information Make of engine: Mercedes-Benz Top speed: 36 km/h Empty weight: 17.020 kg Functional Lifting capacity: 5.000 kg Identification Serial number: 762324 Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Mitas Transport dimensions (LxWxH): 7.96x2.43x3.05 Additional information Ledpjya T E Eofx Ad Aerk Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2008, machine/vehicle number: ME107330, Weights Empty weight: 2.450 kg Functional Mast: articulated arm Lifting capacity: 210 kg Working height: 1.200 cm Other information Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Max. horizontal reach: 300 m Transport dimensions (LxWxH): 2.35x1.25x2.4 Lrsdpfxjv Rvhte Ad Ajk Additional information Please contact PFEIFER GROUP for more information

Condition: used, This listing is for a Thermo Scientific Dionex AS-DV Autosampler. The unit is in full working condition and is ready for immediate release. Please note that ULM do not check or guarantee the provision of software Software Thermo Scientific Chromeleon 7 license key usb- Built for the lab and IT, Chromeleon CDS chromatography software enables both productivity and regulatory compliance with automated controls, data analysis, and security tools. The Thermo Scientific™ Dionex™ AS-DV Autosampler is an innovative solution for automating sample handling in routine ion chromatography applications. It’s designed to enhance productivity while maintaining cost-effectiveness, perfect for labs focused on ion and water analysis. Key Features: Automated Sample Handling: Random Access and Flexibility: Offers random access for multiple injections and filtration, allowing labs to run samples efficiently without manual intervention. High Reproducibility: Ensures consistent results thanks to precise mechanics that control dispense speed and volume. User-Friendly Control: Please note that ULM not to check the software and cannot guarantee the provision Lrsdjxhf Utjpfx Ad Ask Chromeleon™ CDS Software: The powerful software simplifies programming for injection loops and concentrator columns, allowing users to easily set optimal parameters. Advanced Sample Preparation: Optional Six- or Ten-Port Valve: This feature facilitates complex sample preparation techniques, including matrix elimination and sample concentration, enhancing analytical capabilities. Performance & Compatibility: Needle and Flow Path: Constructed from all-Thermo Scientific™ PEEK™, ensuring durability and minimal contamination. Vial Compatibility: Works with 5.0 mL and 0.5 mL polymeric vials, and filter caps can be used for automatic filtration, promoting better results. Injection Volume Range: Supports injection volumes from 0.1 to 5 mL, accommodating various experimental needs. Sample Capacity: Can hold up to 50 vials of either size or a mix of vials, adding to its versatility. Specifications: Dimensions: Height: 9 in (23 cm) Width: 17.5 in (44.45 cm) Depth: 22 in (56 cm) Weight: 16 kg Speed Control: Adjustable from 0.1 to 5.0 mL/min in 0.1 mL/min increments. Voltage: Compatible with 100/240 V. Compatibility: Works seamlessly with various ICS systems, including ICS-5000, ICS-2100, ICS-1600, ICS-1100, ICS-900, and legacy IC systems.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 43655, functionality: fully functional, rotational speed (max.): 12,000 rpm, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Ljdpfx Ajyxgzxjd Aerk Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system The machine is ready for operation

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 5,950 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 5,650 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm Ledpetk Ikmjfx Ad Ajrk 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 5,950 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (possibly two-piece) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 3,300 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 3,000 mm Lrjdpfx Astk Irksd Aok 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,300 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Lodpfx Adotk Iwaj Ajrk Basic dimensions: Width: approx. 3,200 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,900 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 3,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: Lrsdstk Iwpopfx Ad Aek The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,750 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 2,450 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,750 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 2,000 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 1,700 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 2,000 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (two-piece if necessary) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm 06x self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm Lsdpfsrtqm Dox Ad Ajrk 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, Year of construction: 2011, operating hours: 81 h, machine/vehicle number: 902593, Weights Lrjdjx U Rdvepfx Ad Ask Empty weight: 6.700 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.500 cm Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Solideal Max. horizontal reach: 760 m Transport dimensions (LxWxH): 5.95x1.75x1.96 Additional information Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 3,200 kg, opening width: 280 mm, total width: 2,050 mm, total length: 1,000 mm, total height: 1,200 mm, cutting force: 100 t, cutting length (max.): 600 mm, Alligator Shear 100 Tons – 11 kW | Powerful Metal Shear for Recycling & Industry This robust alligator shear is the ideal solution for efficient metal cutting in recycling operations, workshops, or industrial environments. Featuring immense cutting force and a durable construction, this machine is designed for continuous operation under heavy loads. Powered by a high-performance 11 kW motor, the unit delivers an impressive cutting force of up to 100 tons (1000 kN). This allows for effortless and reliable processing of a wide range of materials such as steel, profiles, pipes, or scrap metal. A 600 mm long blade and a maximum opening of 280 mm enable convenient handling of even larger workpieces. With a cycle rate of 9–16 strokes per minute, this shear operates efficiently and ensures a high throughput. The heavy-duty construction with a total weight of 3,200 kg guarantees maximum stability and long service life—even in demanding continuous operation. Technical specifications: • Power: 11 kW • Cutting force: 100 tons / 1000 kN • Max. pressure: 100 tons • System pressure: 16 MPa • Blade length: 600 mm • Max. opening: 280 mm • Stroke rate: 9–16 strokes/min • Weight: 3,200 kg Lodpfx Adsyu S Egs Asrk • Dimensions: 2050 × 1000 × 1200 mm Highlights: • Extremely powerful metal shear (100 tons) • Ideal for scrap, steel, profiles & pipes • Large blade length for versatile applications • High throughput due to efficient stroke rate • Robust industrial design for long-lasting use This alligator shear is the perfect choice for anyone looking to cut metal reliably, powerfully, and efficiently.

Condition: used, Year of construction: 1996, Manufacturer : Marchesini Model: MS 235 / AS 237 / BA 50 Year : 1996 Type : 4-seal pouch packaging line for powders. 1. Bagging machine Vertical automatic machine with intermittent movement for filling and sealing bags, for medium and high speed production lines, for powders. Volumetric shaving filler Mechanical speed: 100 strokes/min Range of formats : max reel outer diameter: 400 mm (800 mm with reel) max reel width: 800 mm (820 mm with waste) bag length: 60 to 120 mm Lrjdpex R Alkefx Ad Ask Reel support trolley Hopper handling trolley Weight: 2100 kg 2. sachet counting unit 3. Cartoning machine Capacity : 70 cartons / minute Dimension A = 40 - 145 mm Size B = 20 - 80 mm Size H = 70 - 190 mm A+B = 190 mm Weight: 900 kg

Condition: used, machine/vehicle number: E-001767, Year of construction: 1996, lifting height: 6,500 mm, fuel type: diesel, motor manufacturer: -, Lifting capacity: 1.800 kg Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Front tyre size: - Lredex Uv Utspfx Ad Ask Rear tyre size: - Transport dimensions (LxWxH): 0x0x0 Please contact PFEIFER GROUP for more information

Condition: good (used), Year of construction: 1990, Ref. -No.: 10542 Manufacturer: GILDEMEISTER Type: AS - 16 Year of construction: 1990 Max. Rod diameter: 16 mm Number of spindles: 6 Pcs Lsdpfsxmd Txsx Ad Ajrk Guide rod length: 3,3 m Further information: The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 1992, operating hours: 5,093 h, functionality: fully functional, load capacity: 4,000 kg, Equipment: crane, Baljer & Zembrod Sorting Line – 75 m, Operational, Available at Short Notice For sale is a used sorting line from the manufacturer Baljer & Zembrod, model AS/30V-L.D. The system comes from active operation and was decommissioned as part of a planned site relocation. The sorting line is fully functional but shows typical signs of wear consistent with its age. Note: The system was previously reserved and is now available again. Technical Data Model: AS/30V-L.D Year of manufacture: 1992 Operating hours: approx. 5,093 Condition: used, operational Defect: Saw blade is defective Length of crane runway: approx. 75 m Crane runway width: 3 meters Load capacity: 4 tons (see load capacity diagram in the photos) Length of round timber staging: approx. 23.5 m Description The machine is suitable for sorting round timber and was in use until recently. The sorting line has been regularly serviced but, due to its age, is in average visual condition. Hydraulics and electrics function reliably. The saw blade is defective and should be replaced or repaired. Fields of Application Ljdpfeyu U Rlex Ad Ajrk Round timber sorting Sawmills Timber processing Biomass and round timber logistics Availability The machine is dismantled and stored outdoors and can be inspected by appointment. Immediate takeover is possible. Inspection under operating conditions (powered up) is possible until early week 14. Afterwards, the location will be disconnected from the power supply due to new building construction. Further technical details, photos, or a site visit can be provided on request.

Condition: used, mileage: 470,198 km, power: 324 kW (440.52 HP), first registration: 03/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space volume: 16 m³, loading space length: 6,620 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Year of construction: 2017, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, MAN TGX 26.440 6x2-4LL Flatbed with Fassi Crane F195 AS.22 VIN: 1HM735853 Chassis / Attachments * Full air suspension * Air/Lift + steering axle * Wheelbase: 4,800 mm // 1,350 mm * Tyres: 315/80 R22.5 * Remaining tyre tread: 1.~60/50%, 2.~90/60%, 3.~90% * Alcoa Dura-Bright aluminium wheels * 1 x diesel tank * 1 x hydraulic tank * 2 x Zen stainless steel toolboxes * 2 x storage baskets * Trailer coupling * Duomat * 1 x fire extinguisher holder Body * Fassi F195 AS.22 crane * Total operating hours: 1,582h // Work: 576h * Year of manufacture: 2017 * Pallet grab * Two-point rear support * Rider crane * Flatbed/siderails sidewall: 1,000 mm, Length: 6.62 m, Width: 2.48 m * Slotted external frame * Side underrun protection * Kinnegrip folding stakes * NCG vehicle body Cab / Driver’s Cabin * TGX XLX cabin * Automatic air conditioning * Radio * Navigation * Distance control * Lane assist * Adaptive cruise control * BT // AUX // USB * New TACHO 4.1 * 2 x rotating beacons * Built-in cabinets * Refrigerator Engine / Transmission Lsdpfxjxrwzmj Ad Aerk * 324 kW // 12,419 cm³ // Euro 6 * Automatic * Retarder * PTO (power take-off) * Differential lock Weights * Gross weight: 26,000 kg * Payload: 10,590 kg * Kerb weight: 15,410 kg Other * German vehicle * Technical Inspection (TÜV) valid until 04/2026 New TÜVs / safety inspections or individual weight reductions/increases on request. We are happy to assist you in obtaining export/temporary registration plates, and can also arrange for delivery of your purchased vehicles within the Federal Republic of Germany. Contact us! ---- We speak the following languages: German, English, Russian ---- No liability for printing or typographical errors. Subject to change, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On our 11,000 m² site, you will find a wide variety of vehicles. Our business philosophy is characterized by fairness and integrity. Customer satisfaction is paramount to us, so we offer our customers an excellent all-around service package and provide a competent contact partner to support them throughout the purchase or sale process. See for yourself! Our services for you: Loading vehicles: We are happy to assist you with loading your purchased vehicles. Organizing special transports: We are happy to assist with the organization of special transports. Day plates / Export registration plates: We are happy to assist you in obtaining export or short-term license plates. Customs formalities: We are happy to assist you with customs matters.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 11,342 h, load capacity: 4,000 kg, lifting height: 4,500 mm, free lift: 1,450 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,550 mm, motor manufacturer: JCB, fork carriage width: 1,800 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire size: 16,5/85-24, rear tire size: 340/80 - 18, overall weight: 11,500 kg, empty load weight: 7,500 kg, total height: 2,550 mm, total length: 3,900 mm, total width: 2,200 mm, color: yellow, Equipment: cabin, lighting, pallet forks, sideshift, trailer coupling, Looking for a reliable forklift? We are industry specialists! 💼🔩 We specialize in selling high-quality forklifts, offering thoroughly inspected machines in excellent condition. Check out our offer and find the perfect equipment for your business! ✅ 🚜 In this listing we present: ALL-TERRAIN FORKLIFT – JCB 940 – TRIPLEX 4500mm – Year 2012 – 11,343 MTH – DIESEL – FREE LIFT – EXCELLENT CONDITION – NEW TIRES The forklift is in excellent technical condition and ready for immediate use. Key Features & Technical Specifications: Model: JCB 940 Year of production: 2012 Lifting capacity: 4,000 kg Operating hours: 11,343 mth Mast type: Triplex Lift height: 4,500 mm Drive: Diesel Load center: 500 mm Engine manufacturer: JCB Power: 75 HP Total weight: 7,500 kg Tyres: Solid, NEW Front tyres: 16.5/85-24 – 100% TREAD Rear tyre: 340/80-18 – 100% TREAD Overall height (folded mast): 2,550 mm Technical condition: Fault-free, after service inspection Visual condition: Very good Fork length: 1,200 mm Free lift: 1,460 mm Total height: 2,550 mm Lrjdpsy Afn Eefx Ad Ask Total length: 3,900 mm Total width: 2,200 mm Fork positioner width: 1,800 mm