Used Alg 100 for sale (38,899)

Condition: new, Year of construction: 2025, controller manufacturer: CYBELEC CybTouch, sheet thickness steel (max.): 6 mm, 2 in 1 = shear + press brake in one machine with control CYBELEC CybTouch 15'' shear capacity 3200 mm x 6 mm, throat 200 mm; press brake capacity 3040 mm, capacity 100 to; working hight 640 / 1240 mm, control CYBELEC CybTouch 15'', mot. back gauge 700 mm, shadow line, motor 7,5 KW Bjdpfx Abjd Huukobolr dimensions 3700x1900x2400 mm, ca. 9000 kgs same machine with capacity L = 2200 mm or L = 1400 mm

Condition: refurbished (used), Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h Bedpfx Abefc Hbdebelr clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: H92-2348, table width: 1,150 mm, table length: 1,250 mm, pressing force: 250 t, stroke length: 400 mm, Control system retrofit to SIEMENS (2005) TECHNICAL DETAILS Press force at 260 bar: 250 t Table clamping area: 1,150 x 1,250 mm Ram clamping area: 1,150 x 1,250 mm Draw cushion area: 800 x 1,000 mm Draw cushion force at 200 bar: 100 t Draw cushion stroke: 150 mm Installation height: 700 mm Ram stroke: 400 mm Oil quantity: 2,300 l Return speed: 330 mm/s Rapid approach speed: 365 mm/s Working speed (partial load): 36 mm/s Working speed (full load): 15 mm/s Bljdewur R Repfx Abbjr MACHINE DETAILS Power requirement: 45 kW Weight without oil: 28 t Machine height: 5,400 mm EQUIPMENT - Programming language: Polish

Condition: used, Year of construction: 1971, nominal power at 50% duty cycle: 100 kVA, Manufacturer: Nimak Type: NMP 7/100 Year of manufacture: 1971 Blodpfxew S Exus Abber Machine No.: 71059 Rated power: 100 kVA at 50% duty cycle Connected load: 175 kVA Primary voltage: 380V Open-circuit voltage: 7.3V Secondary current dd/max.: 8/33 kA Electrode force: 750 kp Frequency: 50 Hz Up to 8.8 V At 6 bar Please submit inquiries only by email. All information has been provided to the best of our knowledge. Errors excepted. This offer is exclusively aimed at entrepreneurs as defined in § 14 BGB. Sale is made to the exclusion of all warranties. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the keywords "Imprint," "Terms and Conditions," and "Data Protection."

Condition: ready for operation (used), 15/10-thick 304 stainless steel plate frame. Electric panel with loaded sterilizing programs. Blsdjwny Iqspfx Abber

Year of construction: 1984, condition: used, pressure 100 t throat 345 mm stroke 20-100 mm no. of strokes 60 Hub/min ram - range of adjustment 85 mm table surface area 980x650 mm ram surface 600x440 mm hole in the table Ø 200 mm table height 820 mm Bsdpsqwpv Sefx Abbjlr tool hole in ram ¤7 65 mm weight of the machine ca. 7 t dimensions of the machine ca. 2000x2000x2900 mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, inner diameter: 250 mm, outer diameter: 300 mm, For the production of internally and externally toothed cylindrical gears and other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference, as well as for the production of profiles using the single part process. incl. robot automation: coordinated Fanuc robot for loading and unloading TECHNICAL DETAILS CNC control: Siemens SINUMERIK 840 D sl External toothing: 300 mm Internal toothing: 250 mm Largest workpiece orbital diameter: 450 mm Nominal machine module: 8 mm Largest toothing width: 100 mm Shaping spindle stroke rate range Special version: 85 - 850 rpm Spindle diameter: 95 mm Mounting: HSK-B80 taper Distances and adjustment ranges Smallest pitch height of the hydrostatic inclined guide: 400 mm Smallest/largest distance between tool and workpiece axis: -70 / +230 mm Stroke position adjustment range (manual): 75 mm Stand lateral offset range: ±25 mm MACHINE DETAILS Weight of the machine: approx. 7,000 kg CONTROL AND DRIVE CNC control: Siemens SINUMERIK 840 D sl Control group: NCU 720.3PN with PLC 317-3PN/DP Drive system: SINAMICS S120 (digital drive technology) Measuring systems: - Absolute encoders for linear and rotary axes (except endless rotary axes) - Incremental measuring systems for C-axis NC axes: - Spindle stroke drive (A) Bljdovdtx Nspfx Abbsr - Workpiece rotation (C) - Tool rotation (C2) - Radial axis (X) shank and tool table Max. Shaping spindle speed: 12 rpm Max. Table speed: 300 rpm Max. Table torque: 220 Nm Table bore: diameter 150 mm, depth 253 mm Free support diameter: 365 mm (4 T-slots, M12 threaded holes) Radial drive: Max. Feed speed: 3,000 mm/min COOLING AND LUBRICATION SYSTEM Coolant tank capacity: approx. 550 l Cutting wheel cooling lubricant delivery rate: approx. 150 l/min Magnetic chip conveyor: - Nominal width: 230 mm - Discharge height: approx. 900 mm Lubrication and hydraulic system Tank volume: approx. 160 l Number of pumps: 2 (lubrication, hydraulic and hydrostatic) POWER SUPPLY Operating voltage: 400 V Control voltage: 24 V DC Frequency: 50 Hz Total connected load: approx. 25 kVA PROGRAMMING Standard dialog program: plain text operator guidance (German, English, Italian) Program functions: Single-cut cycle Multi-cut cycle (max. 3 cuts) Dimensional corrections Linear or degressive infeed EQUIPMENT 1 basic machine(s) AM 250 1 power clamping device 1 main column intermediate plate (150 mm high) 1 special ram head 0 - 110 mm stroke length 1 HSK-B80 tool holding cone 1 counter column with fixed counter support arm 1 counter column intermediate plate (100 mm high) 1 set of vibration isolators at no extra charge 1 Electronic handwheel 1 Extended software for fault diagnosis at no extra charge 1 Internet diagnostics system 1 Flow monitor 1 Flushing gun 1 150 mm diameter pipe socket 1 counterholder tip - rotating 1 draw tube and attachment bush AUTOMATION: 1 standard interface 1 Internal flushing of clamping top parts 1 Automatic loading door

Condition: new, Hydraulic workshop press LFSS Typ. DPM-K 1570/100 hydraulic workshop press with adjustable cylinder Technical specifications pressure 100 t stroke 300 mm table surface 1570 x 260 mm column passage between the guides 1570 mm infeed speed 8,0 mm/sec Bsdpegipi Tsfx Abbslr working speed 5,0 mm/sec retraction speed 10,0 mm/sec Motor power 5,5 kW Machine weight approx. 1580 kg. Space requirement approx. 2630 x 1000 x 2290 mm Equipment: hydraulic workshop press with adjustable cylinder table height adjustment V-block tool insert pressure gauge

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: DHD/250/100, die cushion stroke: 200 mm, total height: 4,500 mm, table width: 1,200 mm, table length: 1,000 mm, installation height: 900 mm, pressing force: 250 t, total length: 2,000 mm, total width: 2,700 mm, control cabinet height: 1,800 mm, control cabinet length: 800 mm, control cabinet width: 500 mm, die cushion force: 100 t, operating speed: 170 mm/s, reverse speed: 250 mm/s, input voltage: 400 V, stroke length: 600 mm, pressure: 235 bar, electrical fuse: 63 A, ram plate width: 1,200 mm, ram plate length: 1,000 mm, Euroblech 2024 trade fair machine - Hamburg location. Bljdettriaepfx Abber

Condition: new, functionality: fully functional, machine/vehicle number: V00002674023, input current: 272 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP54, year of last overhaul: 2025, power: 250 kW (339.91 HP), Equipment: type plate available, Exact type designation: Vacon 0100-3L-0261-7-ED-FLOW+SEBJ+IP54+EMC4+LS60+CAPU+CAPD+CDLP+CACH+C AMH+CPS0+EMAR+GNUL+GADN INPUT: Uin:3~AC,525-690V, 50/60Hz, 272A OUTPUT: 3~AC, 0-Uin, 0-320Hz, 261A POWER: 250kW:690V / 250HP:600V ° NEW in original packaging! ° Formed! ° Easy to use thanks to the integrated control panel ° Original operating instructions for commissioning included Bjdpfx Abjrwznijbslr Only 1 more in stock!

Condition: good (used), functionality: fully functional, machine/vehicle number: 940329, type of cooling: water, This is a NIMAK PMP 6-2 / 100 spot welding machine. TYPE: PMP 6-2/100 MACHINE NO.: 940329 Blsdpfx Abovbgxqsbjr Dqm: 72N U1N: 400V 1~ 50 HZ Sn 50% ED: 100kVA S max: 318 kVA I20c : 48 kA U20 from 5.8 V to 8.3V in 2 steps Clamp opening: 240mm - 500mm Outl. l: 350mm Fmax: 1100 daN at 6 bar Cooling water 10L/min

Year of construction: 2016, condition: new, Compact cell Fanuc ArcMate 100/7L with R30iB control , Lorch S3 pulse welder new Number of axes: 6 Max. Load: 7Kg Max. Working range: approx. 1633 mm Year of construction: 2016 Table area 750x500mm each Total dimensions: approx:2500x1500x2200 Total weight: approx. 2000kg Bljdpfxeiamrre Abbor Net amount plus 19% VAT

Condition: ready for operation (used), Feed rate: 5-25m/min. Bjdjhkdubopfx Abbelr

Condition: new, Hydraulic workshop press LFSS Typ. DPM 1070/100 Technical specifications Pressure 100 t stroke 300 mm table area 1070 x 260 mm column passage between the guides 1070 mm infeed speed 8,0 mm/sec working speed 5,0 mm/sec retraction speed 10,0 mm/sec Motor power 5,5 kW Machine weight approx. 1400 kg. Space requirement approx. 2110 x 1000 x 2290 mm equipment: Bedogipilepfx Abbjlr hydraulic workshop press table height adjustment V-block tool insert Pressure gauge

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, Forging units - Units consisting of 3 machines, to ensure efficient and automatic series production: 1 piece of ring rolling mill, 1 piece of manipulator, 1 piece ofring raw press The forging units / machines can be inspected by appointment. Condition: In good working order / operational. Item 1: Ring rolling mill Brand: WAGNER / Type: RAW 125/100 / Year of manufacturing: 1986 Item 2: Transport manipulator Brand: DANGO & DIENENTHAL / Type: STM 12 / Year of manufacturing: 2001 Item 3: Ring blank press (electro-hydraulic) Brand: WAGNER / Type: RStPö 1500 S / Year of manufacturing: 1986 Bsdpfswx Sqrox Abbslr NOTE: Just the complete package is available for sale (no individual items). There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale. Detailed technical data sheets and information on equipment available on request.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: V00002513199, input current: 415 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP54, year of last overhaul: 2025, power: 400 kW (543.85 HP), Equipment: documentation/manual, type plate available, Exact type designation: VACON0100-3L-0416-7-ED-FLOW+SEBJ+IP54+EMC4+WT03+FL03+DLNL+CIFD+C CET000109+EMAT+GNUL+GADN INPUT: Uin:3~AC,525-690V, 50/60Hz, 415A OUTPUT: 3~AC,0-Uin, 0-320Hz, 416A POWER: 400kW:690V / 450HP:600V ° With TEST SEAL! ° Only 13 operating hours - according to the manufacturer over 100,000 possible! Blodpjrwzr Ujfx Abber ° Easy to use thanks to the integrated control panel ° Quick parameterization possible ° Original operating instructions for commissioning included Only 3 more in stock! Item has been reset to factory settings and is therefore in the original delivery condition from the manufacturer. Please refer to the original product images for the optical condition. Functional and ready to use.

Condition: used, Year of construction: 1992, machine/vehicle number: 920544, current capacity:100 kVA throat:280 mm capacity at 50%:100 kVA Blsdpocxxwnefx Abbor pressure:1,1 t stroke:100 mm table-size:180 x 170 mm control:MPS-29-K-S-R total power requirement:279 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,15 x 2,1 m spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off

Condition: used, ILD1800-10(100), optoNCDT 1800, Micro Epsilon Laser Triangulation Sensor System RS232 Model: ILD1800-10(100) Condition: Used Bledpfx Abjq S Sl Tjber

Year of construction: 2017, condition: ready for operation (used), Vötsch VAW 60/100 Heat Oven / Heating Cabinet / Furnace Internal dimensions: 600mm x 1000mm x 600mm (W x D x H) External dimensions: 1800mm x 1800mm x 2200mm (W x D x H) Rated temperature: 650 °C Year of manufacture: 2017 Nominal power: 20 kW You are welcome to arrange a viewing. We can organize cost-effective shipping for you upon request. Bsdpswykz Sefx Abbelr You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offers. All listed company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the description of the item may occur and are reserved.

Condition: new, Year of construction: 2025, overall weight: 9,000 kg, pressing force: 100 t, 2 in 1 = Press Brake + Shear bending length 3040 mm, Press capacity 100 to, Shear capacity L = 3200 mm x 6 mm, throat 200 mm, working high 640 / 1240 mm, Control CYBELE CybTouch 15, mot. gauge 700 mm, shadow cutting line, motor 10 KW Bjdpfed Hn Tasx Abbolr dimensions 3700x1900x2400 mm, ca. 9000 kgs same machine available L = 2000 mm und L = 1400 mm

Condition: used, material width max. 100 mm material thickness 0 - 3 mm feed length max. 120 mm material cross-cut 150 mm² pulling capacity 400 N repeating accuracy +/- 0,03 mm air path of the top roller max. 5 mm pressure of the top roller max. 6 kN engine torque 6 Nm total power requirement kW Bodpotqm Dbofx Abbolr weight of the machine ca. t dimensions of the machine ca. m

Condition: excellent (used), Assembly press ITALPRESSE SR 3/100 Bjdpfxewyailj Abbelr Working length: 3300 mm Working height: 1800 mm Number of vertical cylinders: 4 Stroke of vertical cylinder: 200 mm Number of horizontal cylinders: 2 Stroke of horizontal cylinder: ~110 mm Machine control via control panel Manual and automatic operating modes

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: -230 V -0,7 A -50 Hz -IP 65 Bledpek Eakvefx Abber

Condition: used, ILD1800-10(100), optoNCDT 1800, Micro Epsilon Laser Triangulation Sensor System Bledpfx Abjq S Sl Neber Model: ILD1800-10(100) Condition: Used

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V Bledpfx Aolatz Dobber - 0,7A - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm