Used Airless Paint Sprayer for sale (4,246)

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) Itodpfx Ajzlktpokpon -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: good (used), Year of construction: 1989, functionality: fully functional, Equipment: cabin, Manufacturer: Garmat Belgium Type: M 6/7A Year of manufacture: 07/1989 Work area volume: 70.5 m³ Fan capacity: 24,000 m³/hour Motor power: 7.5 kW Gas burner: 200 kW Total electrical connection value: 14 kW Operating voltage: 380/220 V The 24,000 m³/hour and 200 kW gas burner make this a serious, professional booth, not a hobby version. Fully functional; Burner and fan are operating; Filter system is complete; No significant rust damage. Internal length: approximately 6.70 m Internal width: approximately 4.0 m Internal height: approximately 2.5 m. The dimensions are approximate. External dimensions: 6.85 x 600 x 310 (approx.) The booth can be inspected, and it must be dismantled by the buyer. We will arrange for a forklift to load it. Itedpfx Akjzcfp Iopon

Condition: good (used), Year of construction: 2002, functionality: fully functional, working width: 1,300 mm, was completely refurbished in 2022. Itedjy Uacuopfx Akpjn

Condition: like new (used), functionality: fully functional, Year of construction: 2006, For sale is a Strojstav MPCS 4 dry shotcrete and guniting machine that has never been used and is in like-new condition (Year of manufacture: 2006). This high-performance machine has 0 operating hours and has been stored securely, offering the build quality and performance of a brand-new machine at a highly competitive price. It is designed for transporting and applying dry concrete mixtures and refractory materials. Technical Specifications & Features: Condition: Like new / Never used (0 operating hours) Year of Manufacture: 2006 Application Method: Dry shotcrete / guniting (pneumatic dry conveying) Feeding Options: Supports standard bagged materials or large-volume Big-Bags using an auxiliary feeding frame. Mobility & Chassis: Heavy-duty wheels with a front-steered twin-axle system for easy manual positioning on-site. Control System: Integrated, user-friendly control station directly on the machine for safe and precise operation. Isdsz Akvrjpfx Akpetn

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Forced convection oven for solvent-containing substances according to DIN EN 1539, 4 charging carts available on request (see image) - Max. temperature 150°C - Usable volume 1875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Guide rails and recesses for loading the oven with a charging cart - Maximum permissible amount of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with defined ramp or hold times (1 program, 4 segments) - Controller upgrade to JUMO DICON available on request - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Weight: 820 kg - Includes 4 charging carts, each with 12 trays and 24 insertion levels, available in stainless steel - Documentation, CE declaration Itedpfxoxbtvfs Akpon - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Oven, drying oven, baking oven, heating oven, industrial oven, solvent oven, paint drying oven, annealing oven, heating oven, temperature oven, drying cabinet, chamber oven, chamber dryer, sintering oven, convection drying cabinet, convection oven

Condition: good (used), Year of construction: 1994, Working area approximately 2,080 x 1,430 mm, lateral impact plates on the right and left, filter area approximately 1,800 x 1,300 mm, 2 rows of paper volume filters approximately 650 x 1,800 mm, internal fine filter G4 approximately 1,350 x 2,000 mm, air flow rate 4,500 m³/h, pressure max. 500 Pa, motor 1.1 kW / 1,400 rpm. Ex works, as inspected, from the Seevetal location, Iodjpvil Tepfx Akpetn subject to prior sale.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, The Cefla iBotic lacquering machine is an advanced robotic finishing solution designed for high-precision coating applications in industrial production. Engineered for flexibility and efficiency, it uses intelligent automation to deliver consistent, high-quality lacquer finishes on a wide range of surfaces. Its programmable system allows for precise control of spray patterns, reducing material waste while ensuring uniform coverage. Ideal for manufacturers seeking to optimize productivity and finish quality, the iBotic combines cutting-edge robotics with reliable performance in modern finishing lines. Itedpfxjy E Huxj Akpon

Condition: excellent (used), The BIBO TC84, a professional Italian edge coating machine, is designed for coating both sides of leather and finishing edges. This machine is used in the production of belts, straps, bags, wallets, and other leather goods that require aesthetically pleasing edge finishing. The device allows for the even application of coating to the edges of the material, significantly speeding up the production process and ensuring high consistency in the finished product. Technical data: Iodpfx Akoz Sm Suspotn Manufacturer: BIBO Model: TC84 Country of origin: Italy Power supply: 380 V 50 Hz Two-sided edge coating Adjustable operating parameters Adjustable material guide Stable steel construction Cabinet/base included Applications: leather belts straps handbags wallets leather goods leather products Condition: Used machine. Visual condition as shown in the photos.

Condition: excellent (used), Year of construction: 2016, operating hours: 10,000 h, functionality: fully functional, Complete painting system comprising two Cefla Flexispray spraying units and three Cross Oven drying ovens. The system was purchased new in 2016 and is customized for painting softwood interior door frames for the Dutch market. The system includes the following units: Cefla Cross Oven #1 Width 320 cm, length 300 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #1 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #2 Width 320 cm, length 390 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #2 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #3 Width 570 cm, length 700 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Ijdpfx Akjz Hbm Tjpjtn The painting system is installed at the factory and is available for a test run. The system is sold "as-is," and its dismantling, relocation, and transport are the buyer's responsibility. Sales price for the system is 120.000 EUR VAT 0% and is negotiable. If there are several buyers, we reserve rights to sell the system to the highest bidder.

Condition: ready for operation (used), machine/vehicle number: 89915, Drive system = compressed air, Isdpfxeiv Huwe Akpotn Material/air ratio = 16:1, Maximum material pressure = 90 bar, Air inlet pressure = 1 to 6 bar, 4 double strokes per 1 liter of material, with MX type spray gun with double hose, unused since the last maintenance in 01/20, Condition as inspected, Ex works, from warehouse Seevetal, subject to prior sale.

Condition: good (used), Year of construction: 2001, Air-powered airless pump on a pump cart The T2001 piston pumps are robustly designed, air-powered airless pumps developed for conveying, transferring, and spraying with multiple guns. Itsdert Uy Nspfx Akpen The parts in contact with the material are made of stainless steel, hard metal, PTFE, or PE. An ATEX approval for use in potentially explosive areas completes the picture and makes the pumps versatile. Below, you will find the advantages at a glance: - Minimal pulsation for a consistent material flow during conveying and spraying - Versatile due to stainless steel, hard metal, PTFE, or PE in the material area - Suitable for liquid solvents and water-based materials - Easy start-up thanks to a self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve in accordance with accident prevention regulations - Mobile versions on pump carts - ATEX approval Ex II 2 Gc IIB T6 Manufacturer: Kopperschmidt Spritztechnik Device type: T2001-60.135 Maximum material flow rate: 9.0 l/min Suction height (empty pump): 1.5 m water column Suction height (filled pump): 6.5 m water column Material temperature: +10 to +85 °C Maximum stroke frequency (short-term): 50 strokes/min Maximum stroke frequency (continuous): 20 strokes/min Maximum material overpressure: 6 bar Gear ratio: 60:1 Volume per cycle: 270 ccm Permissible operating overpressure: max. 360 bar ATEX: Ex II 2 Gc IIB T6 Air connection: G3/4“ Material outlet: G3/8“ Material inlet: G1″ Weight: 45 kg Customs tariff number: 8424 8970 Year of manufacture: 2001 New price: 13,600 € including VAT You can find more items in other sizes – new and used – in our shop! International shipping costs on request!

Year of construction: 2021, condition: new, Derryglan Ltd - Bagging Systems offer exceptionally reliable, cost-effective bagging solutions. We offer a range of semi-automatic & automated bagging machines for many applications. We offer a full range of accessories to suit your requirements and application. With body material available in painted mild steel or stainless steel. Itjdsgq N Axepfx Akpjn The T-1000 Advanced Poly-Bagger is our 'top-of-the-line bagger'. It is no wonder the T-1000 is also our best-selling machine! Designed for long or short runs, the T-1000 has the capability of cycling over 60 bags per minute, faster than any operator could manually feed. The T-1000 is also fast enough to keep up with automatic infeed equipment including vibratory bowl counters, scales and infeed conveyors. The T-1000 Advanced Poly-Bagger is also designed to run inline with punch/stamp presses, injection mould machines, blister machines and other continuous feed manufacturing equipment for inline bagging.

Condition: excellent (used), Paint mist extraction unit, ALKO spray wall Increased flexibility thanks to extraction technology with a frontal plate system Itjdpfoy Dpfwex Akpsn Motor data: 0.75 / 2.1 kW ex/ 400 V / 50 Hz Speed: 950 / 1,420 rpm Airflow: 3,000 / 6,800 m3/h Dimensions (W/H/D): 1,912 x 1,405 x 943 mm with side panels extended: 2,971 x 1,405 x 1,215 mm Filter surface: 2 m2 Weight: 248 kg Condition: very good

Year of construction: 2026, condition: new, functionality: fully functional, drying rack for painted parts double-sided shelf length 690 mm maximum spacing 2600 mm rods covered with rubber mobile design Itsdez Rm Edepfx Akpsn height 178 cm new, unused

Condition: good (used), Year of construction: 2005, Collomix Rota 30 Paint Mixer The Collomix Rota 30 is a high-performance biaxial mixer specifically designed for the fast and efficient mixing of paints, varnishes, and plasters in closed containers. It features a biaxial mixing process in which the container rotates simultaneously around two axes, enabling mixing times of less than 90 seconds, even with heavy materials. Itedpoy Nxh Eofx Akpon Features and Ergonomics Automatic clamping: After insertion, the mixing container is automatically fixed and centered. Safety features: Integrated safety door lock and an emergency stop button; the door only opens after the mixing unit has come to a standstill. Handling: Equipped with extendable rollers and height-adjustable machine feet for easy positioning. Durability: An integrated "splash guard" mechanism protects the drive components from contamination by leaking paints. Application areas The device is primarily used in the paint wholesale and retail trade, as well as in the chemical industry. It is often used as a system component in paint dispensing systems to mix color pigments into base paints without clumping. Collomix Rota 30 Paint Mixer For mixing: Paints Paint granules Facade paints Industrial paints Plasters Other low-viscosity materials Max. mixing weight: 35 kg Recommended continuous mixing weight: 30 kg Max. container height: 60-400 mm Year of manufacture: 2005 More paint mixers in other sizes - new and used - can be found in our shop! International shipping costs available upon request!

Condition: good (used), Spray booth with extraction system and cabinet – Used painting system for workshops and industry This spray booth with integrated extraction system and practical storage cabinet is the ideal solution for professional painting work in workshops or production facilities. Itjdpfx Aksg I Dhgopsn Technical specifications External dimensions of the spray booth: 72 cm (width) × 60 cm (depth) × 80 cm (height) Extraction system integrated for optimal dust and paint fume extraction Cabinet with storage space: 72 cm (width) × 109 cm (depth) × 100 cm (height), incl. 6 drawers Materials & surface: powder-coated steel, rust-resistant Airflow & filter technology: pre-filter + fine filter, exhaust system Colors / Design: green & black (custom colors available on request) Modularity & expandability: can be part of a larger painting system Condition / quality: (New / Used, inspected) Warranty / service: 12 months warranty, spare parts & maintenance available With its compact dimensions of 72 cm width, 60 cm depth and 80 cm height, it offers an efficient work surface with minimal space requirements. The cabinet with 6 drawers (72 cm × 109 cm × 100 cm) provides ample storage space for tools, paints and accessories. Complete workshop equipment, large selection of mezzanine floors, pallet racking, shelving, paternoster lifts. High-quality industrial machines, lathes, grinding machines, handheld machines. You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2019, VIDALI painting system Ijdpfxjzx Rxxj Akpstn Spray booth with overhead conveyor.

Condition: good (used), functionality: fully functional, High-pressure piston-diaphragm pump. Universally suitable for aggressive, abrasive, or shear-sensitive products. Very low rinsing agent consumption. For all applications up to 250 bar and 5 l/min. Supplies up to 8 AirCoat spray guns. + 3 automatic AirCoat spray guns with internal control for installation in automated painting systems. Iedjxmf Svjpfx Akpotn +FITTINGS+AIR/PRODUCT HOSE

Condition: good (used), Year of construction: 2009, For sale GIARDINA MOS/4PLUS paint line Iodpfx Astxnp Nskpotn

Condition: like new (used), Year of construction: 2011, functionality: fully functional, volume flow: 230,000 m³/h, nominal power (apparent): 22 kVA, For sale: filter for removing haze from paint. Fine dust filter. Ijdpfx Akjzhbqqopjtn

Year of construction: 2023, operating hours: 16 h, condition: like new (used), functionality: fully functional, GCV Glass Picasso V2 260 glass painting machine, year of manufacture 2023, condition - as new. AUTOMATIC PAINTING MACHINE GCV Picasso-V2 260 Max. Glass Width (mm): 2600mm Max. Glass Length (mm): unlimited Max. Glass Weight (kg): 600 kg Min. Glass Size * Width * Length (mm): W 220mm * D 900mm (single panel size) Itodpfx Aszhagkskpjn ADDITIONAL PRODUCTION EQUIPMENT 1 pc. transport table, equipped with wheels 1 pc. large stand for drying and storage portable sample boards with color palettes Mixer with pigment stand, Number of containers: 24, Container volume: 2.3 l

Condition: good (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 40 kg, CABO Mixspace Multispeed Paint Mixer Gyroscopic Mixer (gyromixer) Year of manufacture: 2015 Display Alphanumeric 20 x 4 Maximum bucket weight 40 kg Bucket holder tray Pull-out Bucket gripper Automatic Gyroscopic ratio 1:1.8 Speed ​​settings 3 programmable Mixing speed 80 - 180 rpm Acceleration / deceleration during the mixing cycle Automatic speed adjustment to the bucket height Mixing cycle time 20sec - 30m Maximum bucket diameter 380 mm Bucket height: min - max 90 - 490 mm Bucket height 340 (+30) mm Bucket types Round/Square/Oval Mains voltage: 230v 50Hz 3A Machine weight 190 kg machine dimensions: width:860mm Ijdpfx Akevmtw Ropetn length:850mm height:1150mm

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, Overhead crane / circular track for painting booth + dipping station + transfer unit Itjdpfx Ajzdbw Rekpen Load capacity: 250 kg With explosion-proof chain hoist and complete control system Dimensions, required space, steel structure: approximately 6 x 3.5 m Highest point: 3.5 m Crane track height: approximately 2.6 m Steel structure / running rails made of IPE200 and HEA120 beams With additional running rail and trolleys Control system and explosion-proof switch for chain hoist Crane is disassembled and packed on a pallet. Used condition - see pictures Collection only by prior arrangement in 75053 Gondelsheim Forklift available for loading Shipping via freight forwarder is possible; please inquire with your postal code.

Condition: like new (used), This paint shaker is brand new, taken from storage and never used. Includes user manual. Itodpfx Akszvf Ayepjn

Condition: used, Painting line Manufacturer: Giardina, Rich Fruit, Neomec, Kremlin The painting system is designed for painting elements made of MDF or HDF boards. The spray booths have two circuits, one for clear coats and one for colored paints. The system is designed for water-based UV coatings. The system consists of the following elements: Infeed Manufacturer: Neomec Conveyor table with a cleaner Spray painting machine Manufacturer: Giardina Type: Dualtech 416 Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Turntable Conveyor table Conveyor table with a cleaner Spray painting machine Manufacturer: Rich Fruit Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Each booth has two circuits, one for paint and one for coatings, driven by KREMLIN pumps and spray guns from the same company. Length of the machine line: 92 m Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding. Isdjzuzg Sjpfx Akpstn