Used Airless Paint Sprayer for sale (4,136)

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. Kedpfx Aowzmcbsfkona FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth Kodpfx Afsxa H Ewjkona It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2026, Wetpaint Spray-/ Dryingcabine Internal dim. L8000 x B4000 x H3000mm 30.000m³/h Inletair/ 30.000m³/h evaporation Internal Temp. 20°C man. adjustable, Drying Temp. up to 70°C Kodpfx Aohzbq Tjfkjna Indirect Gasburner approx 300KW (-10°C - +20°C) Software in delivered switch box Inlet air ceiling with filter G4/EU4 und NF600PA, Outside air bollom using grids and PS50 glas fiber Light (4x18W) wall integrated LED, 750LUX Grid point weight max750kg

Condition: used, functionality: fully functional, power: 9 kW (12.24 HP), gearing type: hydrostat, fuel type: gasoline, color: white, number of seats: 1, Equipment: onboard computer, Line marking machine: + Airless pump Speeflo 4900XLT Kjdpoy H Hg Rjfx Afksna + Bead container + Self-propelled forward/reverse + Bead dispenser + Line marking spray gun + Hand spray gun with hose + Honda GX390 engine, 12 HP + Line section computer Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, intermediate sale reserved!

Condition: used, used, good conditionnumber of tiers 14tier depth approx. 550 mmspace requirement approx. 1200 mm x 800 mm x 175 mmstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Knsdpfxjwi Rn Dj Afkoa

Condition: new, - NEW -- stable tubular frame construction- Extendable from 200 to 2000 mm andlockable to any desired width- 17 shelves on both sides possible- 4 polyamide castors, capacity 400 kg- Supporting tubes galvanizedTechnical specifications:Support pipe length: 650 mm- extended to: 1150 mmLight intermediate dimension of the tubes: 60 mmLength: 200 - 2000 mmDepth: 870 - 1180 mmHeight: 1855 mmItem No. 13-03000001 Kedpfxovwfvms Afkona

Condition: new, The inexpensive shelf trolley Ecoflex isfor space-saving and gentle storageof painted workpieces. ByThe Ecoflex can also use its 4 swivel castorsTransport of workpieces can be stable tubular frame construction letscan be adjusted from 200 to 1500 h its 17 plastic-coatedSupport tubes on each side, the trolley canWeights up to 400 kg with a uniformabsorb distributed load. The pluggable onesSupport tubes can optionally be removedand can be reinserted on the backwill. When not in use, theAssemble shelf trolleys to save gth: 200 - 1500 mmDepth: 870 - 1180 mmHeight: 1855 mmSupport tube length: 650 mmClear intermediate dimension of the tubes: 70 mmLoad capacity: 400 kg Knodpfx Aevwf Ehsfkja

Condition: new, Year of construction: 2026, total height: 3,000 mm, total length: 4,900 mm, total width: 2,400 mm, volume flow: 3.6 m³/h, type of input current: three-phase, power: 1.1 kW (1.50 HP), Equipment: cabin, Wet paint spray booth in cabin with extraction and supply air filter, lighting. Knsdorvi Riepfx Afkoa

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, working width: 1,300 mm, working height: 110 mm, TECHNICAL DETAILS Max. working width: 1,300 mm Max. working height: 110 mm Min. working height: 8 mm EQUIPMENT Motorised feed rollers 2 brush units The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. Ksdsyqynuepfx Afkena External reference: 7615

Condition: new, Year of construction: 2024, 4 UNITS AVAILABLE FOR IMMEDIATE DELIVERY with 15 support rails (rail surface: edge trim) Dimensions: L x W x H 910 mm x 700 mm x 1850 mm Shelf depth: 510 mm Shelf width: min. 500 mm - max. approx. 2000 mm Distance, clear width from the shelves: approx. 78 mm Load capacity: max. approx. 600 kg evenly distributed Load capacity/calculation: approx. 40 kg Weight: approx. 90 kg Knjdpfx Aegmht Ssfkja

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth dimensions without fan and control Panel! Suction area - dimensions (mm): 2190w)x2350(h) Overall dimension (mm): 2295(w)x2295(h)x1910(d) Knsdpfxoia Taqj Afksa Technical data: - Fan power 2.2 kW (ATEX) - Fan suction power: 12000 m³/h (max. 1100Pa) - Lighting: 1pc 2x58W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x810(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) Ksdjia Ta Rjpfx Afksna - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty We can manufacture filtration supply (new air to sprayroom). Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1900(h) Overall dimension(mm): 3100(w)x2350(h)x1910(d) Technical data: Knsdpfoia Tausx Afkoa - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Lighting: 2 pcs 2x36W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1400(h) Overall dimension(mm): 3100(w)x1850(h)x810(d) Technical data: - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Ksdpfx Afoia Ta Hjkjna Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, EISENMANN Industrial Paint Complex - Complete Automotive-Grade Paint Line (New/Unused, 2008) Manufacturer: Eisenmann (Germany) - Tier-1 OEM supplier for Mercedes, MAN, Solaris, Volvo etc. Year of manufacture: 2008 Application: Full-cycle industrial painting of buses and large vehicle bodies. Components included: 1. Full Surface Preparation Line ● Pre-cleaning booth ● Degreasing, rinsing, and activation tanks Kedpfxozi D T Do Afkona ● Phosphating tank ● Rinsing tanks (8 m and 12 m) 2. Cathodic Electrocoating (KTL) ● Full-size KTL tank ● Post-KTL drying chamber 3. Sealant & Mastic Application ● Specialized PVC & underbody protection booth ● Sealant/mastic application booth 4. Primer Line (Primer 1 & Primer 2) ● Application booth ● Drying booth ● Cooling booth ● Workstations for filling, sanding, surface preparation 5. Final Paint Line ● Paint application booth ● Drying booth ● Cooling booth ● Minor defect correction booth ● Final inspection & preservation booth 6. Additional Systems ● Paint preparation room ● Wastewater treatment unit ● Transport systems ● Ventilation units ● Regenerative thermal oxidizer (RTO) Condition: new/unused, 0 working hours

Condition: excellent (used), functionality: fully functional, Olimpia SE3BSTD spray booth wall Kjdpfjy Rmyxex Afkjna Length: 3000 mm 2x cardboard filter Pint stop filters Filtration capacity: approx. 11,000 m3/h Motor power: 2.2 kW CE mark Dimensions: 335x150x238 cm (H)

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 2190w)x2350(h) Overall dimension(mm): 2295(w)x2295(h)x810(d) Technical data: Knodpfjia Ta Aex Afksa - Fan power 2.2kW (ATEX) - Fan suction capacity: 12000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2025, Paint booth, TM1010 paint wall made of INOX stainless steel. Working dimensions (mm): 1000 (w) x 1000 (h) x 600 (d) Overall dimensions (mm): 1200 (w) x 2200 (h) Knjdpfxjd S N Swe Afkja Technical data: 1,1 kW fan power, Capacity 4500 m³/h, Compression 870 Pa, 3 stage air filtration, 96% filtration degree, Explosion proof Ex fan, Inverter to adjust the fan rotation speed, IP 66 control panel, Hermetic lighting IP 65. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 111313, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: R-30iA, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended for painting blades for wind turbines. For this purpose, it was installed on a 60 m long rail, which had another rail with which the robot could travel up and down. For this reason, two large additional amplifiers are installed in the control system. This is why the encoder break module is also present twice. Another special feature of this robot is that motors are installed in the shoulder to control two gear pumps. So a 2-component mixture on the robot is no problem. The robot was never actually used. The operating hours only occurred because the robot was live. This was also confirmed to me by the operator of the system (Enercon). The actual servo ON time is 0.2 hours. The robot has slight soiling, but is practically as good as new. Kedpfx Ajtu Hpqjfkjna Unfortunately, the teach pendant and the teach cable are very dirty. However, this could be replaced if necessary. The cable length between the robot and controller is 5m and can be plugged into the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. We have two of them. The price is for one robot. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device can be inspected under voltage at Paintrobotics.

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. Knodpfjtu H Avjx Afkea We would bring the device to us from Frankfurt.

Condition: like new (used), Year of construction: 2006, operating hours: 39,475 h, functionality: fully functional, machine/vehicle number: 80022, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It was once used at BMW to clear coat luxury car bodies and, with its 40000 hours, has a certain working life behind it. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control system. The second additional amplifier is used to control motors in the shoulder for gear pumps. However, these motors are not installed. The rail motor would then be connected directly to the robot. The cable length between the robot and the controller is 10 m and can be plugged into the controller. This is also special. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as left-armed and left-handed. It has line tracking. However, this can easily be changed without mechanical conversion. Kjdstu H Hcopfx Afkjna The device is still with our customer, but can be inspected under voltage at Paintrobotics if you are seriously interested. We have two of them. We would also bring the device to us from Frankfurt.

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), gearing type: hydrostat, fuel type: gasoline, Year of construction: 1998, Line marking machine: + ProSign + Citadine + Self-propelled – hydraulic – forward and reverse + Airless pump + Line spray gun + Hand spray gun + Honda GX160 engine, 5.5 HP + Year of manufacture: 1998 Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale! Knsdpfxjx Ek Tfj Afkja

Condition: used, functionality: fully functional, power: 26 kW (35.35 HP), gearing type: hydrostat, fuel type: diesel, color: white, operation weight: 1,900 kg, axle configuration: 4x2, number of seats: 1, Year of construction: 2003, operating hours: 1,768 h, Equipment: onboard computer, Road Marking Machine: Knsdpsyhd E Sofx Afksa + Euroliners + Trassar 201A + Year of manufacture: 10/2003 + 1,768 operating hours + 1,900 kg + 3-cylinder diesel engine, 36 hp + Hydrostatic drive + Articulated steering + Protective roof + Rear warning device + 2 bead containers of 130 L each + 2 paint tanks + bracket for a third tank on the right + Airless pump + Compressor + Guide rod and spray boom hydraulically adjustable + Machine from municipal ownership Receive all newly listed vehicles via email – subscribe to our NEWSLETTER! Errors and changes excepted, subject to prior sale!

Condition: used, functionality: fully functional, power: 6 kW (8.16 HP), gearing type: hydrostat, fuel type: gasoline, color: blue, Road marking machine: + Graco Knedpjw Svqzefx Afksa + LineLazer IV 250SPS + Paint tank / Bead container + Parallel spray: 2x spray nozzles / 2 bead dispensers + Hand spray unit + Hydraulic drive, self-propelled forward/reverse + Airless pump + Honda GX 270 engine, 8.4 HP Receive all newly listed vehicles via email – subscribe to our NEWSLETTER! Errors and typos possible, prior sale reserved!

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: gasoline, color: white, overall weight: 750 kg, first registration: 07/2001, Year of construction: 2001, Line marking machine on trailer: + Zebra 5 + Airless pump + Hand spray gun with hose reel + Honda GX200 engine, 6.5 HP + Electric start + Fixed paint tank Trailer: + Crapie + Type CMF750 + First registration: 20/07/2001 + Ball coupling + Height-adjustable drawbar + 370 cm x 205 cm (LxW) + Perm. total weight: 750 kg Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale! Knjdsw S T Taepfx Afksa