Used Agglomerator for sale (13)

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. Bedoyvpxzepfx Acvswk We are the manufacturer of this system and can guarantee service and spare parts supply. The system is available at short notice!

Year of construction: 1998, condition: excellent (used), functionality: fully functional, high-impact mixer (continuous mixer and agglomerator), 45 kW SEW direct drive, feed chute and main shaft made of stainless steel 304, fitted with 4 nozzles made of stainless steel 316, inspection door opening safety switch is missing, documentation available, dimensions 136 x 120 x 309 cm (lxwxh), weight 1728 kg Bwjdsuy Tavspfx Acvek

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Bjdpswg Sgcofx Acvewk Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2021, condition: used, functionality: fully functional, machine/vehicle number: 4601230000, Hosokawa Micron B.V. Flexomix FXD-250 Intensive Mixer / Vertical Mixer – Year of Manufacture: 2021 Manufacturer: Hosokawa Micron B.V., Netherlands Type: FXD-250 (Flexomix) Machine Number: 4601230000 Year of Manufacture: 2021 Condition: Used, good technical condition Availability: Upon agreement Technical Data – General Empty weight: approx. 950 kg Max. bulk density of product: 0.7 – 0.8 kg/l Product area / housing: atmospheric ATEX: not available (N/A) Temperature Ranges Ambient: 0°C to +40°C Storage: -10°C to +60°C Bwsdsyn Nhfjpfx Acvjk Operation: Product area: 0°C to +75°C Housing: 0°C to +65°C Liquid supply: 0°C to +75°C Design: Product area: up to 80°C Housing: up to 70°C Liquid supply: up to 80°C Pressure Design pressure: Product area / housing: atmospheric Liquid: 5 barg Operating pressure: Product area / housing: atmospheric Liquid: 4 barg Nozzle Configuration 1 liquid system 4 nozzle holders (2 nozzles each) 8x standard HMBV nozzles Max. air consumption (nozzles): 120 Nm³/h Power and Media Connections Power supply: 3x 400 V AC / 50 Hz Control: 24 V DC Machine protection rating: IP55 Network type: TN-S Compressed air / nitrogen: 7–8 bar(g), clean, dry, oil-free Max. total air consumption: 149 Nm³/h Nominal current: 27 A Drive Manufacturer: Siemens Type: 1LE1603 Power: 15 kW Speed: 3000 rpm Protection class: IP55 Frame size: 160M Insulation class: F Note: Operation above 3000 rpm is not permitted according to manufacturer instructions. Bearings Permanently lubricated bearings, re-lubrication not required Foundation Forces Static vertical force: 9500 N Dynamic vertical force: 2100 N Dynamic horizontal force: 300 N Recommended vibration dampers: 4 pieces, Ø 100 mm, height 55 mm, 65° Shore Application The machine was used for mixing: Glass powder + CaCO₃ + water glass Suitable for high-intensity powder-liquid mixing processes. Scope of Delivery: - Complete mixing unit - Siemens main drive - Nozzle system - Documentation in accordance with FAT (sound level included in FAT document) - GA drawing 4601230201 available A viewing appointment can be arranged upon request. Loading can be organized.

Condition: good (used), Year of construction: 2008, functionality: fully functional, A used agglomerator from WEISS is being offered. Model: RL 900/2. Motors: 2 x 110 kW. Bedpfx Asxl Rw Uecvewk

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. Bedpsyvqbwjfx Acvjwk • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 Bodpfxeyvpyfe Acvswk • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2026, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Bsdpfowg Sd Uex Acvowk Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: used, Year of construction: 1999, Document Description Mill for the size reduction and recycling of agglomerates, lumps and granules in mass. Manufacturer: Gericke Model: NBS 300/450 Year: 1999 Choice of granulometry: Grid or wire mesh Operating principle: Rotor with 4 blades. cutting effect on the product with the screen. Inlet section: 300 x 350 mm. Power: 3,7 KW Max capacity : 12.000 L/H (depending on product and output size). Materials: stainless steel. Bwsdpfx Ajx R Apcscvsk Mounted on a mobile frame.

Condition: new, Year of construction: 2024, functionality: fully functional, COMPLETE PLASTIC GRANULATION LINES We offer technologically advanced complete plastic granulation lines designed to meet customer needs. Koltex PRS is a Polish manufacturer of high quality machinery and equipment for the various stages of waste recycling: PP,PE,LDPE,LLDPE,PS,ABS,HDPE. We provide comprehensive solutions and support for machine configuration. The innovative technologies of our recycling systems guarantee the highest degree of user-friendliness and equipment efficiency. We offer all the machines needed to configure a complete plastic recycling line. The XR 8 granulation line is the latest model from Koltex Plastic Recycling Systems in the field of LDPE film processing. In addition to the well-known technological solutions used in standard extruders, a number of changes have been made to achieve high production rates while improving the quality of the regranulate achieved. The new system is characterized by low energy consumption and significantly simplified operation thanks to the new SMART software. Numerous modifications have reduced the machine footprint by 30% compared to the previous model, but also increased productivity by 45% while reducing energy requirements by around 15%. An intelligent temperature control system for the plastic in the Agglomerator and an automatic material dosing system ensure process stability. Thanks to the automation of the process, operator involvement has been reduced to a minimum. Our offer also includes: Complete systems for plastics recycling Mills Plastification systems, vibrating screens, centrifuges Screen changers Peripheral equipment Washing lines (DWFS®) Bwsdpfjuqmavsx Acvok Dynamic washing machines Drying separators Granulation and extrusion lines Service and spare parts You can find out more about our range of products in this area at our website

Year of construction: 2014, condition: excellent (used), functionality: fully functional, RECYCLING PELLETIZING EXTRUSION LINE – BEIER 2014 / EKOCHEM – 2023 – with autostart heating - Belt conveyor with amperes load control - Agglomerator – 75 kw with cooling blower and auto water spray system Bwedpfjuac Ugjx Acvek - Main engine extruder – 110 kw - Double degassing MELT LASER FILTER SYSTEM – HOP 400 – Ekochem – 2023 - with autostart heating - with cooling pump - laser filter spare parts: 1 set 200 microns, 1 set 250 microns, 2 sets 300 microns, 2 blades PELLETIZER – RW-440 – Ekochem – 2023 - with new Ekochem die head water pump - with PE and PP die head - with air compressor and custom die head blades – 48 h/set change - Centrifuges - Vibrator - Heated Silo + weight system - Capacity: PP( 400 – 500 kg/h) / PE( 500 – 600 kg/h )

Year of construction: 2022, condition: new, Electrostatic filters are considered the most sophisticated technology, currently available, for the collection of solid and liquid particles existing in an exaust air flow. The electrostatic uptake allows the separation of any particle from the air, regardless of its size. In fact, the agglomeration of very fine particles is possible with efficiencies up to 99% on atmospheric dust according to the EN 779 method.The use of electrostatic filters therefore allows to obtain air completely free of dust , smoke, spores, bacteria, pollen ecc . The main advantages deriving from the use of electrostatic filters are: • High filtration efficiency Bwsdsh Aku Tspfx Acvok • Low pressure drops • Low operating cost • Limited maintenance interventions • High operating reliability

Year of construction: 2010, condition: excellent (used), Mastersizer Hydro 2000S The analyzer has been serviced annually. Condition: very good. Ready for operation. Technical data: Particle size analyzer for liquids, Malvern Mastersizer 2000 with Hydro 2000S module. The Hydro 2000S module can circulate between 50 ml and 150 ml of liquid. Variable pump/mixer speeds allow for suspension and circulation of particles of varying sizes and densities, while the variable-power ultrasonic system enables the dispersion of particle agglomerates. The Mastersizer 2000 measures particle sizes in the sample and displays their distribution on a computer graph. Measurement takes place as particles pass between the detector array and the laser. Hydro 2000S specifications: Voltage: 220-240 V, 50-60 Hz Power: 240 VA Maximum particle size: 600 µm Mastersizer 2000 specifications: Voltage: 240 V, 50-60 Hz Power: 60 VA Particle size range: 0.02 µm to 2000 µm Lasers: Bxzqjbv8Dy Bwsdpfx Asx Niiyecvek Red: gas laser, wavelength 633 nm Blue: LED, wavelength 466 nm This product consists of two separate units: Mastersizer 2000, Hydro 2000S, software included Mastersizer external dimensions (W x D x H): 133 x 30 x 40 cm Hydro 2000S external dimensions (W x D x H): 34 x 35 x 34 cm