Used Adjustable Fence for sale (22,217)

Condition: used, Year of construction: 2015, Base machine T65C Automatic, 1 unit Todpfxsz Alfue Aa Ijc General technical features: • Weight: 1600-2,200 kg, Martin composite stand • Table size: 860 mm x 1370 mm in gray cast iron; table extension is standard, designed as a lockable tool tray, 335 mm x 625 mm • Table height: 900 mm • Scoring table: Standard length 3000 mm, table length corresponds to cutting length; position-independent locking; guides are hardened, wear-resistant, self-cleaning; table lip is replaceable; design in anodized aluminum • Saw blade spindle: Ø 30 mm for main saw blade, two drive pins 8 mm • Saw blade change: Quick-change system "ProLock" • Saw blade diameter: Ø 250 - 550 mm; can be recessed under the table up to 400 mm; saw blades up to Ø 400 mm can be used with inserted scoring saw blades • Cutting width: 1,100 mm • Saw blade swivel: 0° to +46° • Cutting height: max. 204 mm / saw blade 550 mm / 0°, max. 135 mm / saw blade 550 mm / +45° • Cutting width (main saw): Saw blades with max. 6 mm cutting width at swivel angle 0° to +46°; special tools with max. 20 mm cutting width at swivel angle 0° • Motor power: 5.5 kW (7.5 hp), 3 ~ / 400 V - 50 Hz • Speeds: 2800 / 4000 / 5000 rpm; easy and convenient speed change from the front via the chip guard • Length stop: Design in anodized aluminum with continuous support, fine adjustment for both fence elements; dimension display via a scale with a magnifying glass; length compensation for angled cuts with electronic assistance; cutting length 95 - 2000 mm, extendable up to 3220 mm • Cross table: Design in zinc-coated steel; angled cuts according to the scale without repositioning the stop; integrated fixing positions for 0°, 22.5°, 30° and 45° cuts, one-hand clamping on the scoring table; support dimensions 1340 x 650 mm • Parallel stop: Electromotive positioning of the parallel stop; stop bar in anodized aluminum, foldable; complete integration of the parallel stop into the control system; guided by four grooved ball bearings, floating above the machine table, removable in any position; movement of the stop in the safety area (0 - 200 mm) in hold mode, display resolution: 0.1 mm; repeat accuracy ± 0.05 mm • Extraction: Connection to protective hood Ø 100 mm, machine stand Ø 120 mm; minimum extraction air volume: 23 m³/min at 800 Pa at the main connection 120 mm • Protective hood: Protective hood with 2 blade sets (1x flat for 0° cuts, 1x with a one-sided belly for cuts 0° to 46°); passage dimension between saw blade axis and support column: approx. 900 mm, clearance when the hood is swiveled away between the saw blade and the protective hood arm: approx. 635 mm; releasing the locking from the working position • Standard accessories: 1 scoring shoe on the scoring table, 1 handle for pushing the wood, 1 ProLock combination wrench, 1 return handle, 4 shims (250/350, 350/450, 450/500, 500/550), 1 push stick • Control panel: Control panel at eye level, can be swiveled away • Electrical equipment (according to VDE/EN 60204): Electronic soft start/stop device for the main saw blade; contact for controlling the extraction; motor protection switch and winding protection, emergency stop button; required voltage supply: 3 ~ / 400 V - 50 Hz • Emission values, workplace emission: Noise values according to DIN EN ISO 11202, dust values according to DIN 33893. Please refer to the operating manual for the technical values. Performance features of the T65 control system: Performance features of the 5.7" (145 mm) touch screen control system with color L

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: AB/129942, F410 SURFACER Surfacing width: 410 mm Total table length: 2600 mm Table height: 855 mm Infeed table length: 1450 mm Adjustable aluminum fence, up to 45° Fence dimensions: 1100 x 170 mm 4-knife cutterblock, diameter: 120 mm Cutterblock rotation speed: 5000 rpm Motor power: 4 kW SCM surfacing guard integrated into the machine frame Dust extraction port diameter: 120 mm Manual star-delta switch Motor circuit breaker, undervoltage release Main switch, lockable Automatic motor brake Adjustable auxiliary fence Available in ARDENNES Tsdjzadchspfx Aa Iec

Condition: used, power: 5.5 kW (7.48 HP), cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, rotational speed (max.): 6,500 rpm, rotational speed (min.): 4,000 rpm, total length: 2,700 mm, total width: 2,000 mm, total height: 1,700 mm, overall weight: 800 kg, No. 3277 Sliding table saw Panhans 684 Used Sliding table length 2600 mm Cutting width 1250 mm Max. saw blade diameter 450 mm Motor power 5.5 kW Speeds 4000 / 5000 / 6500 rpm Manual saw blade tilting 0° - 45° Manual cutting height adjustment Mitre fence on the sliding table Cross-cut table approx. 1400 x 650 mm LW Cross-cut fence extendable up to 3200 mm Mobile machine base Transport dimensions approx. 2700 x 2000 x 1700 mm LWH Weight approx. 800 kg Sale on behalf of customer, ex location near 73433 Aalen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Tedpfszcc R Nsx Aa Ioc Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: new, Panel saw ALTENDORF F 35 Type 3 - 1000 5.5 kW (7.5 hp), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC parallel fence, cutting width 1,000 mm, Angle-mitre stop 3,450 mm, without length compensation, Table extension/table widening:, With high-quality CDF surface ----- Technical data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inches, Working table height: 910 mm, Suction connection Ø: 80 + 120 mm Tsdpfx Aaswnr Eho Isc

Condition: excellent (used), Bäuerle Tjdpjhu Haxofx Aa Ijc -2-knife cutterhead -Cutting width 41cm -Adjustable fence, swiveling -Total table length 221cm -Includes fence with adjustable stop -Includes 2 replacement knives 3 new V-belts Robust and heavy-duty thickness planer. Inspection and test run possible by appointment.

Condition: new, - Sturdy steel and cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high intrinsic weight - Standard with reversing function (left/right rotation) and electronic interlock when changing direction - Five speeds from 3,000 to 10,000 rpm - Speed change is easily and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large cast iron work table for long-term precision - Easy handling via control elements and speed display located at the front of the machine - Large dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank - Numeric display of the set spindle height, accurate to 0.1 mm - Powerful industrial motors This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable to end customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Net weight approx.: 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of extraction ports on fence: 1 - Extraction port diameter on fence: 120 mm Work Table: Tjdpou T Hhkjfx Aa Iec - Work table length: 2,500 mm - Work table width: 810 mm - Table height: 923 mm Placement Information: - Space requirement explanation: Dimensions take into account the maximum travel ranges or usable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the specified measurements to the space requirement to obtain the recommended free installation area for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with numeric digital display - Curved milling safety hood - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual adjustment of milling unit height and tilt - Control element position: located on the machine body - Table configuration: table extension on left and right, and pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (lowerable): 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm

Condition: new, - Large jointer tables made of cast iron - The jointer table adjustment is controlled via a precise parallelogram system, ensuring that the distance from the table tips to the cutterhead remains constant in every position - The large, stable fence made of anodized aluminum is easily movable and tiltable from 0° to 45° - The fence angle is readable from the working position - Supplied as standard with auxiliary fence - Large, four-knife cutterhead with precision bearings - Smooth operation thanks to precision engineering and heavy cast construction - Powerful industrial motor - Maximum user safety combined with the simplest operation - Chip removal display via scale - Manual table adjustment - Motor protection switch Equipment Details -Includes foldable auxiliary fence for narrow workpieces -Manual quick adjustment for chip removal with scale and rotating knob Safety Guard -The safety guard is foldable and designed to provide operator protection without hindering work TERSA Models with Tersa Cutterhead System Todpeu T Hrcefx Aa Ijc -No setting or screwing required -Cutter knives can be changed in seconds -Self-locking -Especially quiet operation -Perfect planing results This product comes with the 3-year Stürmer warranty upon online registration. Warranty only applicable to end customers in Germany and Austria. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3 - PO Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weight: - Product length approx.: 2750 mm - Product width/depth approx.: 1500 mm - Net weight approx.: 680 kg Jointer: - Total table length: 2720 mm - Infeed table length: 1498 mm - Max. depth of cut on jointer: 8 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90 – 45° Connection for extraction: - Extraction port diameter: 120 mm Setup Information: - Footprint length: 2750 mm - Footprint width/depth: 1604 mm - Footprint explanation: Dimensions reflect maximum travel or usable lengths. Electrical Data: - Main motor power: 7 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Cutterhead: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 - Cutterhead speed: 5000 rpm - Max. planing width: 520 mm

Condition: new, ALTENDORF WA 6 sliding table saw - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, pivoting, outrigger table, angle mitre fence, automatic brake, can be lowered below table height ----- Technical data ----- Swivel range: 0 - 45 °, Cutting length: 2,500 mm, Cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, Swivel range mitre fence: up to 49 °, speeds: 4,200 rpm Motor power main motor: 5.5 hp / 4.0 kW, Scoring motor power: 0.5 hp / 0.37 kW, Tsdpfxou R Sx Es Aa Ioc Work table height: 910 mm, Extraction nozzle Ø: 1 x 100 / 50 mm each, Weight: 450 kg - new exhibition machine -

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum Tsdpfeu R S Ersx Aa Ijc ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new exhibition machine -

Condition: new, functionality: fully functional, KINGWAY GB Series – Professional Tracked Dumpers for Demanding Applications The KINGWAY GB800 and KINGWAY GB500 tracked dumpers are designed to ensure efficient transport of heavy materials under a wide range of operating conditions. Whether on construction sites, in agriculture, or in landscaping and horticulture, both models impress with their robust build quality, high performance, and thoughtful, ergonomic design. The durable rubber tracks and powerful drive systems provide stable movement even on soft, uneven, or steeply sloped terrain. Thanks to their compact dimensions and the ability to turn almost on the spot, these machines are ideal for confined spaces such as narrow properties, gardens, or congested construction sites. Both dumpers feature a sturdy skip with removable drop sides, facilitating easy loading and unloading of materials such as soil, demolition debris, timber, or paving stones. The mechanical transmissions allow the operator to optimally adjust speed according to the terrain and job requirements, while the rugged steel construction ensures high durability and longevity. TECHNICAL DATA – KINGWAY GB500 - RED Model: DR-MD-03A Engine: Petrol Engine power: 7 hp Transmission: 3 forward gears + 1 reverse gear Payload: 500 kg Skip length: 900 mm Skip width: 670 mm Skip height: 290 mm Track width: 180 mm Sound power level (LWA): 103 dB(A) Operating weight: 178 kg Fields of Application: • Construction: Transport of sand, rubble, mortar, and paving stones • Agriculture: Transport of feed, fertilizer, and crops • Landscaping: Removal of soil, grass, branches, bark, and stones • Fencing: Transport of concrete, soil, and assembly materials • Building materials trade: Loading and unloading of bulk materials Key Advantages: • Powerful engine and robust tracks for challenging terrain • Compact dimensions and excellent maneuverability • Skip with foldable and removable drop sides • Sturdy steel construction for intensive use • Simple, intuitive operation and high productivity PRICE: €1,600 net €1,904 gross TECHNICAL DATA – KINGWAY GB800 - GREY Model: TD800A Engine: Petrol Engine power: 15 hp Transmission: 6 forward gears + 2 reverse gears Payload: 800 kg Tedeyk Sl Ejpfx Aa Iec Skip length: 1,320 mm Skip width: 830 mm Skip height: 320 mm Track width: 180 mm Sound power level (LWA): 103 dB(A) Operating weight: 378 kg Fields of Application: • Construction: Transport of sand, rubble, mortar, and paving stones • Agriculture: Transport of feed, fertilizer, and crops • Landscaping: Removal of soil, grass, branches, bark, and stones • Fencing: Transport of concrete, soil, and assembly materials • Building materials trade: Loading and unloading of bulk materials Key Advantages: • High-performance engine and robust tracks for tough terrain • Compact dimensions and high maneuverability • Skip PRICE: €4,100 net €4,879 gross

Condition: used, Year of construction: 1994, used, in top condition, excellent features, many accessories with 3-axis control, pneumatic spindle change, electronic adjustment of the milling fence 99 memory programs, 15 exchange spindles, adjustable table insert Manufacturer: SCM Type: T150 Class Year of manufacture: 1994 Motor: enhanced 6 / 7.5 kW Swiveling range: -10° to +45° Motor brake Motor: 2 speeds / pole-reversing Speed stages: 3250/5000/6500/10,000/min Right/left rotation Table size: 2700 x 700 mm Milling arbor diameter: 14 x 30 mm / 1 x 40 mm Milling arbor mount: HSK Milling arbor quick-change system: SK / HSK Table top extension: 2x 650 mm Frame support: extendable Todpfsythdvjx Aa Iec Aluminum fence jaws Milling fence with fine adjustment Digital displays for milling fence: diameter, clamping depth, jaw offset Protection and pressure device Control panel on top Control panel: swiveling - electric height adjustment - electric swivel adjustment - electric milling fence Positioning control for 3 axes: height/swivel/milling fence with 99 programs Digital displays for swivel angle, spindle height, fence depth Swiveling device for milling fence Socket for feed device New price: approx. EUR 40,000 - 45,000 Dust extraction connection: 120 x 120 mm Space requirement: approx. 2700 x 1300 x 1800 mm Weight: approx. 1073 kg Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, functionality tested without overhaul without warranty

Condition: used, Year of construction: 1992, Table dimensions 1100 x 880 mm Motor output 7,5 kW Spindle diameter 30 mm reus 3000/4500/6000/9000 U/min Weight 650 kg Year 1992 Used Machine Year of manufacture: 1992 Features and technical specifications: - Universal table milling machine for machining wood, plastic, and light metals. - Interchangeable MK5 milling arbor, secured for left/right rotation - Special ball bearings for high-speed operation Todpfx Aaozr Rq Ie Iec - Special ribbed table with quill and additional dust extraction under the table. - Locking mechanism for tool change in any spindle position - Digital height indicator with 1/10 mm resolution and zero setting (optional) - Maintenance-free and dust-protected bevel gear feed mechanism: 1 revolution = 1 mm, stroke 130 mm - Central lubrication of both bearings and the feed spindle - SFM 101 control panel - Speed displayed visually and automatically - With automatic brake - Extremely fast belt change with automatic speed display - Machine table dimensions: 1,100 × 880 mm - Working height (table): 900 mm - Motor power: 7.5 kW - Speeds (VBG 7 visual display): 3,000 / 4,500 / 6,000 / 9,000 rpm - Max. height adjustment of the milling spindle: 130 mm - Safety interlock for high speeds - Milling spindle taper: MK 5 - Milling spindle, interchangeable: Ø 30 mm - A-weighted sound pressure level at ear level: L(A) 75 dB - Connection diameter: 2x120 mm - Air velocity: 24 m/s - Air flow rate at table: 680 m³/h - Airflow rate at the router fence: 1,060 m³/h - Dimensions: approx. 140 x 100 x 175 cm - Weight: approx. 700 kg

Condition: ready for operation (used), Year of construction: 2023, operating hours: 260 h, clamping force: 550 kN, screw diameter: 25 mm, Hydraulic injection moulding machine manufactured in 2023. This TEDERIC NEO.E55/e110h features a 12" color TFT touchscreen control unit and a stainless steel material hopper. It includes a 3-stage central ejector and a pneumatic core pull control. With a screw diameter of 25 mm and a bimetallic barrel, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the TEDERIC NEO.E55/e110h machine we have for sale. Contact us for further details. General • Operating Hours: Approx. 260 h • Machine Condition: Working Injection Unit • Screw Diameter: 25 mm • Screw Type: Nitrided Thermoplastic Screw • Barrel: Bimetallic • Nozzle Radius: 10 mm • Nozzle Bore Diameter: 2.5 mm • Stainless Steel Material Hopper • Manually Sliding Material Hopper • Feed Throat Temperature Control • Dosing Signal Output • Ceramic Heater Bands • Hot Runner Controller: 8 Zones • Temperature Control Channels: 8 Clamping Unit • Centering Ring Diameter: 100 mm • Mounting Plate Threads: M16 • Euromap Standard: Euromap 2 • 3-Stage Central Ejector • Central Lubrication for Mould Height Adjustment • Pneumatic Ejector: Included • Pneumatic Core Pull Control: 1 • Core Pull Connector: Euromap 13 (HAN 16A) • Water Circuits: 6 Control & Electrical • Control Unit Brand: KEBA • Display: 12" Color TFT Touchscreen • Power Supply: 400 V • Frequency: 50 Hz • Main Switch: 4P+PE Automation & Accessories • 3-Axis Linear Robot: TLRE03-650, (optional, not included) • Robot Payload: 3 kg • Pneumatic C-Axis • Mechanical Robot Interface: Euromap 18 • Electrical Robot Interface: Euromap 67 • Vacuum Circuits: 2 • Compressed Air Circuits: 2 • Automatic Lubrication of Main Axes Tedpfxoznu Ddo Aa Iec • Robot Protection Class: IP67 • Emergency Stop: 1 • Conveyor Belt Dimensions (optional, not included): 2000 × 400 × 1100 (+100) mm • Safety Fence Dimensions (optional, not included): 800 × 1000 × 2000 mm • Spare Parts Kit with Non-Return Valve (optional, not included)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Equipment: saw blade guard, scorer, Used panel saw Manufacturer: Altendorf Type: F45 Year of manufacture: 2010 Cutting length 3200mm. Cutting width 1300mm Maximum cutting height 130mm (saw blade diameter 500mm) Saw blade and scoring saw swivel 0-45° digitally adjustable Saw blade and scoring saw height adjustment digital Parallel fence manually adjustable Tjdeztwvajpfx Aa Ioc Double roller carriage, safety guard Switching on the main saw blade and scoring saw from the control panel and/or the machine table Main motor, panel saw 5.5KW (7.5 HP) (adjustable at 3500/4500/5500 rpm) Scoring saw motor, panel saw Duplex miter fence

Condition: new, CATALOG NUMBER: M0261 TECHNICAL DATA Number of spindles: 21 Distance between first and last drill: 640 mm Distance between spindle centers: 32 mm Max. workpiece size: 50 x 915 x 3000 mm Max. drilling depth: 65 mm Number of pneumatic clamps: 2 Working table height: 860 mm Max. clamp height above table: 70 mm Working pressure: 6-7 bar Air consumption: 10 l/cycle Motor power: 1.5 kW Noise level: 76.1 dB Spindle speed: 2800 rpm Dimensions (L/W/H): 1030/1030/1285 mm Weight: 275 kg PRODUCT FEATURES Main machine features: - Single-head boring machine, drilling range 0 - 90 ° - Pneumatically adjustable head inclination angle - Cast iron fences - Spindles adapted for quick-connect couplings - Patented pneumatic workpiece clamps - Cast iron work table - Fast and precise adjustment - Accurate drilling - Made in Italy Standard equipment: - 2 aluminum rulers, 1.5 m each (right and left) with two stops - 5 quick couplings - Wooden box for secure transport of the machine Todpfxjzw Dwro Aa Iec ADVANTAGES - Drilling vertically, horizontally, or at an angle - Multi-spindle - Brand new machine - CE certified - Robust and professional Net price: 13,800 PLN Net price: 3,330 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (prices may vary in case of significant exchange rate fluctuations) - We ship machines to every part of the country - Possibility to trade in another machine as part payment The prices provided are net prices. Net price applies to international transactions and EU customers with a valid EU VAT number. Before placing an order for a new product, please confirm availability and current price.

Condition: new, functionality: fully functional, Year of construction: 2026, Tilting Spindle Moulder CORMAK WS1000TA is a technologically advanced machine designed for professional woodworking in carpentry, furniture and production workshops. With a tilting spindle, a large cast iron table and a precise tool guidance system, the machine enables efficient and accurate machining of straight and profiled wooden components. Main advantages of the machine Tilting spindle from +5° to -45° – allows for bevels, rebates and special shapes to be machined. Large, heavy-duty cast iron table – ground and polished for smooth glide and work stability. Four-speed spindle control: 1,800 / 3,000 / 6,000 / 9,000 rpm – flexibility for various materials and tools. Rigid steel frame structure – ensures vibration damping and precision even under heavy load. Spindle stroke 100 mm and maximum tool diameter 180 mm – suitable for a wide range of cutters. Precise spindle and stop adjustment – enables accurate machining and dimensional repeatability. Easy tool change – optimised spindle access reduces setup time. Construction and technology The CORMAK WS1000TA spindle moulder is designed for durability and functionality in serial production. The machine body is made of thick-walled steel sheets, ensuring rigidity and resistance to deformation. The main table 1,000 × 360 mm and optional sliding table 1,000 × 240 mm allow efficient handling of long workpieces. The motor power 2.8kW (S1) / 3.9kW provides the energy needed for solid wood and wood-based materials machining. Precision and performance The machine allows for precise milling operations, including angular machining. The tilting spindle enables non-standard operations, while the accurate column spindle guide eliminates play and improves surface finish. The V-belt transmission ensures quiet and stable operation across the full speed range. Applications The CORMAK WS1000TA spindle moulder is ideal for: professional carpentry workshops, production of door and furniture components, machining of tenons, grooves, rebates and decorative profiles, angled and curved milling with a suitable attachment. Standard equipment Tedsycu Awspfx Aa Isc 30 mm spindle Side and top pressure hold-downs Precision milling fence Curved milling attachment Angle stop User manual CE Declaration of Conformity Optional accessories* Sliding table (1,000 × 240 mm) – shown in the photos Mechanical feed systems Special protective covers and guiding systems *The price quoted applies to the machine only, excluding optional/additional equipment, installation, transport and training — please contact our consultant for more details. Technical data Spindle diameter [mm] 30 Spindle speed [rpm] 1,800 / 3,000 / 6,000 / 9,000 Spindle stroke [mm] 100 Table dimensions (L × W) [mm] 1,000 × 360 Sliding table dimensions (optional) [mm] 1,000 × 240 Table height [mm] 900 Max. cutter diameter [mm] 180 Spindle tilt [°] +5 to -45 Motor power [kW] 3.9 Motor power S1 100% [kW] 2.8 Weight [kg] 270 Warranty [months] 12 User manual included

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Unicontrol 12 Consisting of: Cut-off unit (item A), Tenon and slotted spindle (item C), Transfer belt (Pos. I), profiling spindle (Pos L), profiling spindle (Pos. N), Profile shaving unit vertical right (Pos. P) Tsdpfx Aeumci Sja Ioc For the production of individual parts and elements in frame-by-frame or serial production. Consisting of a cross processing unit and a longitudinal processing unit connected to a transfer belt. Working width 40-140mm (See pressure ruler left 40 - 140 mm) Working height 40-120mm Workpiece length min. approx. 275 mm + 1 x end profile length Long machining: approx. 220 mm + 2 x end profile length Workpiece length max. 3500 mm The part dimensions depend on the machine equipment, production type and tool assignment. A final definition of the part dimensions is only possible after receipt, inspection and approval of the complete and final layout drawings. Cross machining: Table feed Motor power 0.3 kW (0.4 HP) Pre-set feed speed for cutting, profiling and return 3-25 m/min Vario table with (studio window production possible) The clamping length of all tenoning and slotting spindles can be used without a tool blank. Workpiece clamping by means of a clamping bridge. Operated by a clamping cylinder installed under the table. NC-controlled long fence mounted on the slotting table. Studio window device Swivel angle max. +/- 75° The minimum workpiece length for slanted windows depends on the angle and the width of the wood. Possible part dimensions for slanted window production Angle Max. Min. Working width Workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60° only counter processing Commission not documented 1)NC automatic angle adjustment for machining angled parts Splinter protection by means of overtravel counter Over the entire spindle length of the tenoning and slotting spindle for 90° machining Manually trackable counter-rail for angled part machining 2) Additional counter-rails

Condition: new, Stable steel-cast iron construction High-precision format sliding carriage made of anodized aluminum with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade adjustable by 45° Large fence frame (960 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm Heavily ribbed planer worktables made of cast iron, annealed and stress-relieved for decades of stability and flatness Helical steel infeed roller for uniform material feed Three milling speeds, manually adjustable Milling spindle with clockwise/counterclockwise rotation Three independent industrial motors Todpfx Aasiiynno Isc With lockable main switch, motor protection switch, emergency stop switch Planer table width 410 mm Planer table length 1810 mm Maximum chip removal 4 mm Thickness table length 605 mm Thickness table width 410 mm Working height min. 3 mm Working height max. 230 mm Feed rate 7 m/min Maximum chip removal 4 mm Dust extraction port diameter 4 x 120 mm Planer cutterhead type TERSA (3 pcs) Planer cutterhead diameter 72 mm Speed 5200 min⁻¹ Circular saw fence length 2250 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2310 mm Saw blade tilt 90 – 45 ° Max. cutting height at 90° 90 mm Max. cutting height at 45° 63 mm Saw blade diameter 315 mm Saw blade speed 4000 min⁻¹ Sliding carriage and table Format sliding carriage length 2600 mm Spindle diameter 30 mm Speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. adjustable/non-adjustable 180/210 mm Power of drive motor 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx. 560 kg INCLUDED OPTIONS - Handwheel with gravity-assisted numerical display for thickness table positioning - Sliding carriage length 2600 mm - Professional fences - "TERSA" planer cutterhead - Clockwise/counterclockwise rotation of the milling cutter

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Todpeiknp Rofx Aa Ijc Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: used, Year of construction: 1992, gebraucht 1992 090174 Belgien 17800 € 1 3050 mm 6 mm 11 - 25 1/min 0.5 - 3 ° 18 750 mm 11 kW 3850 mm 1750 mm 1720 mm 4600 kg 770 mm SC 5 control for: - Sheet thickness input - Automatic cutting angle and gap adjustment - Cutting length limitation - Programmable backgauge length Motorized backgauge 750 mm Downholder protection guard Foot pedal Table supports with ball bearings 1 side fence 1000 mm Operating manual in German Machine does not comply with German accident prevention regulations (UVV) or Austrian AMVO NEW BLADES Tedpfx Aasyi Hppe Ioc BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: new, ALTENDORF Model F45 Pro Drive Offer type: New machine, FOR SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer's warranty. Pro Drive control: Tsdpfxeiz Aufs Aa Iec 3.5" color display with separate keyboard Automatic dimension correction on the parallel and miter fence when the saw head is swiveled Easy axis calibration Machine diagnostics, operating hour counter, USB interface Recall of the last dimension input (back function) 99 storable cutting programs Grooving: with automatic step-by-step positioning of the parallel fence 400V / 50Hz - Europe, scale: scale in mm Electromotive height and swivel adjustment 0 – 46° for the main saw blade with automatic correction of the cutting height when the saw head is swiveled Machine height 910 mm (standard equipment) The control panel of the F 45 is mounted at eye level. This allows all axes to be easily controlled, and all settings are within view. The one-hand operation of the outfeed device is easily accessible from the working position in front of the machine. Another advantage: nothing stands in your way on the smooth machine front. INCLUDES OPTIONS: M62003 Template holder M64080 Extended cutting height with saw blade projection of max. 204 mm. M51101 Single-sided swiveling saw head with 7.5 kW (10 HP) motor M24030 2-axis scoring unit with electromotive height and side adjustment M24037 LED lighting for the danger area of the scoring unit M41010 Table extension 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Miter fence, cutting length up to 3500 m. M44443 CNC parallel fence, cutting width 1300 mm. M44450 Front support roller. M37003 On/off switch on the double roller carriage Note on used machines: • Subject to errors in technical data and prior sale. • Indicated prices are ex works, pickup only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as is, as viewed, without any warranty claims. • The buyer is free to inspect the machines at the location. • Special agreements are only possible in written form. (We only answer inquiries if you provide your address + telephone number!)

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 Todpfxjdcd Dle Aa Ioc feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: new, Catalog number S0336 TECHNICAL DATA - Length of the planer table: 1800mm - Working width: 410mm - Working height: 225mm - Spindle speed: 4500 rpm - Number of knives: 4 pcs - Spindle diameter: 100mm - Motor power S1: 4/5.6kW - Voltage: 400V - Dimensions (L/W/H): 1900/800/1300mm, - Weight: 495kg Four-knife spindle guarantees precise machining. High-quality and durable finish. Planer tables fold backwards, thus not limiting the functionality of the thicknesser. Table made of gray cast iron, with a ground surface. Adjustable thicknesser spindles for optimal workpiece transport. Stable work fence, adjustable in the range of 90° - 45°. Precisely mounted helical cutterblock spindle. Thickneser table with central column guide and stabilizer. Space-saving side placement of the profile fence. Scope of delivery: Tsdpfx Aszrk Rnea Ioc – Knives (mounted), – Heavy-duty profile fence, – Two rollers in the lower thicknesser table Optional equipment: – Horizontal drill, – Spare knives 410 x 25 x 3.0mm Net price: 15700 PLN Net price: 3651 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8062 Technical specifications: - max. main blade diameter 500mm - main blade adjustable up/down and at an angle, electrically - spindle diameter 30mm Tjdpfx Aaszxq Ugo Isc - spindle locking - with a crosscut fence - with a side fence + angle guide - crosscut fence length 3000mm - cutting width adjustable with the electric guide from the upper control panel 1550mm - with a side fence and an angle-adjustable guide - with a scoring saw - max. scoring saw diameter 120mm - scoring saw motor 0.75kW - main motor 6kW - blade adjustment up/down, adjustable from the upper control panel - angle adjustment, adjustable from the upper control panel - 2 types of rotation speeds - pressure beam - START/STOP switch in the crosscut table - angle guide - table extension 2000x1530mm - large blade guard - diameter of the dust extraction nozzle 100mm, 120mm - dimensions (L/W/H) 3600x3800x1600mm - weight approximately 1200kg Advantages: - Polish production - with a scoring saw - START/STOP switch in the crosscut table - pressure beam - original DTR documentation - unpainted - used saw, very good condition Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 1996, Working width: 520 mm Planer shaft: Tersa Number of knives: 4 Jointing table length: 2300 mm Jointing fence angle adjustable: yes Jointing tables folding: pneumatic Maximum thicknesser pass height: 250 mm Thickness table height adjustment: electric Thickness indication: digital Feed speed: 5 / 8 / 12 / 19 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: segmented Table rollers: no Motor power: 5.5 kW Motor brake: yes, automatic Extraction connection: 120 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 980 kg Tedpfx Aasy A Hh Tj Iec