Used Abac B 2800 for sale (7,919)

Condition: used, Year of construction: 2007, workpiece diameter nominal 2400 mm max. workpiece diameter 2800 mm max. module 30 mm control Siemens Sinumerik 840 D dividing plate diameter 2200 mm table diameter 2500 mm Tjdpfow Rf S Sjx Ahujf Table hole Diameter / depth 800 / 875 mm max. table load 40000 kg Table rpm 4,5 min-1 clamping length max. 375 mm clamping diameter max. 350 mm cutter diameter max. 2800 mm Cutter arbor cone HSK-B160 swivelling range milling head + 30/-45° Distance Cutter - Workpiece 615 / 1600 mm weight of the machine ca. 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical Documentation

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Geometric acceptance with inspection protocol With warranty Tjdpfxjvfdate Ahuef Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual CE and Safety Equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: used, machine/vehicle number: WSM0000000520xxxx, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 20696 Specifications: 2018 model 33 podium finishes Partition 2 temperature zones Recent major service on the generator Mileage: 295,000 Best tt test for new FRC approval: 06.06.2025 Description:Thermo trailer with booms and 2 temperature zones.New FRC approval.Ready for delivery. Technical approved: Yes Todpewqwkhjfx Ahusf EU-approved until: 22.04.2026 Own weight: 9402 Total Weight: 42000 Payload: 32598 Width: 260 Length: 1404 Model: thermotralle m/ Ny FRC godkjenning til 6/2028 , bommer, 2 temp soner & ny service

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Tjdpfst Rmhaex Ahusf Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 1996, plate thickness 6.0 mm ST thickness at "Niro-steel" 4.0 mm plate thickness 8.0 mm ALU angle adjustable from - to 30 - 140 Grad table: 950 x 890 mm blade length 220 x 220 mm stroke 35 H/min work height max. 1150 mm total power requirement 3.0 kW weight 800 kg range L-W-H 1200 x 1200 x 1400 mm New price approx. 20.000 euros Tsdoxabx Espfx Ahusf Special price on request - in checked condition - machine video - ?v=QmUbaV41BfA Equipment: - electro-hydraulic notching machine * ??with adjustable angle 30° – 140° - cutting capacity up to 6.0 mm sheet thickness (R42/mm2) - made of the special spheroidal cast iron GS500. - the cutting movement takes place from top to bottom - robust work table made of steel with conical grooves * which ensure optimal adhesion of the stop angles - the scales are embossed - automatic cutting gap adjustment (patented) - system for the automatic adjustment of the gap * between the upper and lower knives * for simultaneous cutting of different thicknesses - 2x angle-adjustable locking stops - finger protection made of plexiglass - 1x freely movable foot switch - waste chute, side - load hook for easy transport - operating instructions (PDF)

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw diameter 75 mm Drive Baumüller 171 KW RPM 2,450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Last application PE pipes Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Connection value: 69 Kva Output approx. 110 kg/h Year of manufacture: 2010 Todpfx Asug Edkjhusf The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 + in stips / lippings (max mm 1) Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (Joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) VTG 3-24 + 283.203 Pressure zone + Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B (2 x Kw 0,66) 30 m/min (0°-25°) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min OPTIONAL: KFA 30 Profile Scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.604 (Kw 0,25 x 4) No. 2 Grooving units 08.190 (1 x Left-hand + 1 x Right-hand) (Kw 4,5 x 2) swivelling 90°/180°/270° Tsdoxggzljpfx Ahuof

Condition: reconditioned (used), Universal tool milling machine Brand: harich (DECKEL) Model: B (FP 2) Refurbished with CE certification Geometric inspection with test protocol Tedpfx Aedvdczshujf With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Coolant system - Operating manual CE and safety equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with braking function - Control panel with emergency stop, release, start and stop buttons - New documentation for machine and control cabinet - CE Declaration of Conformity

Year of construction: 2005, condition: good (used), Sanyo SPW-XDR94GXH56(B) Variable Refrigerant Flow Semi Concealed 4-way air discharge Capacity : Cooling :2.80kw Heating 3,20kw Air-circulation (High) 900 phase 1. 50Hz Voltage rating (AVR) V 230 Running amperes 0.21 0.18 A Power input 0.032 0.022 watt Power sound level (H/M/L) dB-A Ref.dia. Narrow/Wide Pipe 6.35 (1/4) / 12.7 (1/2) Weight 21+4,5 kg Indoor Unit H/W/D mm 265 x 840 x 840 Panel H/W/D mm 291 x 950 x 950 • Sirocco fans and heat exchanger fins with new shapes are adopted and the operating sound could be reduced by max 6 db (A)! • Wide reduction of the power consumption by adoption of newly developed DC fan motors with variable speed, new heat exchangers • Easy fine adjustment of the body suspension height • Discharge opening and flap with new shape • A drain height of approximately 85 cm from the ceiling surface • Easy servicing of the drain pan Todpfx Ahed Tw T Nsujf We have 6 pc on Stock!

Condition: used, Year of construction: 2003, Perfect binding line Consisting of Gathering machine Kolbus ZU 841.B Tjdpfsv N U U Nex Ahuof Year: 2003 Description: - Hand feeding station: 1 - Number of gathering stations: 21 - Optical sheet control Reverse feeder Card gluer - Hotmelt glue unit: Nordson Problue 4 - Air center: Becker VariAir, 2005 - Set up element - Reject gate for incomplete products: AS 841 - Transfer into the binder Perfect binder Kolbus KM 410.B Year: 2003 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Robatech ICS C 160 - PUR spine gluing unit, interchangeable (nozzle): EP 48V, 2008 - PUR premelter for PUR spine glue unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side glue unit, interchangeable: 3 mm - Premelter for side glue unit: Robatech ICS C 30 - Stream cover feeder: Non Stop - Na 400.B - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Description updated

Condition: used, machine/vehicle number: 005639, Type of edging: Thin edge, Thick edge Tsdpfxsvw Evgs Ahusf Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 50 m/min Operating Units Right Side: 12 nr Operating Units Left Side: 12 nr

Condition: like new (used), Year of construction: 2005, functionality: fully functional, input voltage: 400 V, overall weight: 590 kg, type of input current: AC, power: 5.4 kW (7.34 HP), Equipment: documentation/manual, manual Lisec 2-k sealing machine TAL-50PS/B for Polysulfide. The machine is completely overhauled and therefore in excellent condition. As new. power: 3N/PE 400V 50Hz Load: 5,4kW Tjdpfxsxr A Hbo Ahusf The machine can be seen in our overhaul warehouse in Oroshaza/Hungary on appointment.

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D Tedpowzyp Ijfx Ahusf weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm

Condition: used, axle configuration: 3 axles, first registration: 08/2007, color: other, Year of construction: 2007, Empty weight: 5.350 kg Axle 1: left 8 mm right 8 mm Tjdpfxew Tatij Ahusf Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: used, mileage: 577,574 km, first registration: 11/1987, fuel type: diesel, color: grey, axle configuration: 6x4, fuel: diesel, wheelbase: 6,400 mm, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 1987, DUTCH TRUCK = Additional Information = Technical Specifications Number of cylinders: 6 Engine displacement: 11,627 cc Axle Configuration Suspension: Leaf suspension Maximum front axle load: 7,100 kg Rear axle 1: Max. axle load: 9,000 kg; Reduction: Outboard planetary axles Rear axle 2: Max. axle load: 9,000 kg; Reduction: Outboard planetary axles Dimensions Dimensions (L x W): 911 x 252 cm Weights Unladen weight: 11,760 kg Payload: 14,240 kg Gross vehicle weight (GVW): 26,000 kg Environment Emission standard: Euro 0 Condition Damages: none Financial Information Price: On request Identification Registration number: 10-BFJ-3 Further information Todjuuli Djpfx Ahuef Contact Thierry Leemans for more information.

Condition: used, Year of construction: 2005, Three knife trimmer Kolbus HD 150.B Year: 2005 Description: - Right hand infeed - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device Tsdpfx Aovf Dtyjhusf - Set of knife holders: 2 - Sets of knives: 2

Condition: used, machine/vehicle number: 007802, Max. panel width: 1000 mm Tjdpjxn Nf Nofx Ahusf Panel return for edgebander: Right

Year of construction: 2012, condition: ready for operation (used), A Climaveneta chiller is available. Cooling capacity: 73.8kW, power consumption: 27.6kW, compressors: 2, refrigeration circuits: 1, refrigerant: R410A, refrigerant charge: 10.2kg, heat recovery: cooling capacity 76.6kW/heating capacity 23.3kW. Machine dimensions X/Y/Z: approx. 2200mm/1150mm/1450mm, weight: approx. 680kg. Documentation available. An on-site inspection is possible. Todpfx Ahexc Nh Teujf

Condition: used, Year of construction: 2008, control Siemens 840D Tedpfewzypnsx Ahuef

Year of construction: 2009, condition: excellent (used), I sell the throughfeed CNC drilling machine HIRZT Livra/B, Year 2009. Working width up to 820mm Configuration: 14 + 6 + 2 pcs. drilling units Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Total area covered: 2000 x 2000 (+800 +800mm) Total weight: 1350 kg. With full documentation and CE. Tjdjnxqdwjpfx Ahujf Very good condition. Available immediately.

Condition: good (used), functionality: fully functional, cutting length: 2800 mm rear guide Tedpfx Ahow D Nq Heuef

Condition: used, Electric motor, three-phase motor -Power: 0.45 kW Tsdjghid Nspfx Ahuof -Speed: 2815 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Protection class: IP 56 -Number: 2x available -Price: per piece -Dimensions: 230/125/H120 mm -Weight: 7 kg

Condition: excellent (used), Year of construction: 2002, I sell the 2-head 2-lamp UV-drying tunnel Cefla TLE/B/2+TTE 2500 Year 2002 Working width 1400mm. Total length 2,50m 2 Lamps HG 120 W + HG 120 W Total power 37,7 kW Tedpfx Ajt S Efgehuef Very good condition, available immediately.

Condition: used, Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply Tsdpfsn Nbm Eex Ahusf -Manufacturer: Hauser, Servo Drive basic device -Type: 951-300000 NMD 10/B -Dimensions: 450/80/H350 mm -Weight: 7.3 kg

Condition: good (used), Gear motor, electric motor -Power: 0.6 kW -Protection class: IP 22 Todpedwdriofx Ahusf -Price: per piece -Number: 1x available -Dimensions: 340/260/H240 mm -Weight: 7.6 kg