Used 4 Jaw Chuck For Lathe for sale (65,348)

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Quantity: 1x set of interchangeable jaws available -Total dimensions: 61/72/H47 mm -Total weight: 0,9 kg/pc. Pedjrhmmyjpfx Ad Ssgr

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set Psdjriicfjpfx Ad Segr -Top jaws: 4-piece hard rotating jaw set -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Quantity: 1 set of interchangeable jaws available -Total dimensions: 76/85/H60 mm -Total weight: 2,3 kg

Condition: ready for operation (used), Diameter: 160 mm Pgjdpfxsyv Dvuo Ad Ssr

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Pgedpfswz Rifsx Ad Ssr Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 130 mm Pgjdpfxeb E N T Ae Ad Ser -Recess: Ø 102 mm -Bolt circle: Ø 116 mm -Through hole: Ø 29 mm -Weight: 4 kg

Condition: excellent (used), Four-jaw lathe chuck (2859) Make Klopfer diameter 300 mm Short taper size 6 Taper diameter 106.39 Pitch circle diameter for stud 133.4 mm Pgodpfx Aetuvnysd Sjr Chuck height 110 mm

Condition: ready for operation (used), Year of construction: 2018, CNC vertical lathe, 4 axes Brand: UMARO Model: SC27 Year: 2001 / 2018 (retrofit) CNC: FANUC 0i Specifications: Turning capacities: Max pass-through diameter: 2650 mm Max turning diameter: 2600 mm Max turning height: 1900 mm Table: Diameter: 2500 mm Max load: 15 t Turning speed (2 ranges): 1 to 112 rpm Main motor power: 75 / 60 kW Cross rail carriages: Vertical travel of right carriage: 760 mm Vertical travel of left carriage: 580 mm Cross rail: Vertical travel: 1600 mm Dimensions (W x D x H, fully extended): 5 x 4.8 x 4.8 m Equipped with: Grinding spindle on left carriage Set of 4 jaws Pgodjw Add Espfx Ad Sjr

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Chuck size 195 mm diameter Pjdpfjlzmw Usx Ad Ssgr -Passage: Ø 60 mm - Accessories: incl. clamping tool -Weight: 18 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Röhm, Top jaw set, rotary jaw set, 4-piece, for chuck size Ø160 mm, 2 sets -Jaw width: 18 mm -Dimensions: see photo technical drawing -Price/Fee: complete Pgsdpfx Aex Hfhyed Ser -Overall dimensions: 160/70/H50 mm -Total weight: 1.9 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Dimensions total: 130/136/H80 mm -Total weight: 7.3 kg Pedpfx Adjw Dp Thj Segr

Condition: used, Year of construction: 1990, Technical details: number of spindles: 8 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AFH130 with CNC Yob: 1990 eight-spindle automatic lathe 8 main spindles Chucker AFH130 for complete machining means front- and back side Control Siemens Sinumerik 840DI complete revising and new configuration of this machine in year 2010. loading arm, for loading and disloading Pedpfx Aezubyrod Sogr Workpiece turn around station in pos. 4 position 4 with workpiece length control CNC compound slide in pos. 5 coolant pump with magnet candle filter delivered tooling: could be different like pictures option: Ergomat TBF42 for cutting off for half finnishing with FMB-Turbo Visiting under production condition is possible Please, contact us for getting more information and pictures on mail(at) or *

Condition: excellent (used), Year of construction: 2025, Format 4 Kappa 450 x-Motion 2-axis control, height and tilt adjustment Technical data: - Cutting length: 2800 mm - Cutting width: 1300 mm - Cutting height: 155 mm - Max. saw blade Ø 450 mm - X-motion control - Angle scale with length compensation - Extractable Ø 120 mm - Motor power: 10 kW Pgedpfxsy Rp D Tj Ad Ssr - Year of construction: 2025 Duplex mitre fence

Condition: excellent (used), AutoStrong power chuck In very good condition! D210mm See pictures for details on the mounting. Pgsdjzhrknjpfx Ad Sjr

Year of construction: 2010, condition: excellent (used), Three-jaw chuck Manufacturer: Forkardt Model: F 250 Threaded spindle: 105 x 6 mm Cylinder diameter: 105 mm Outer diameter: 250 mm Inner diameter: 63 mm Psdpfx Adsfb T Dbo Sjgr Chuck height including flange: 180 mm Age is estimated.

Condition: good (used), 3-Jaw Spiral Chuck Manufacturer: RÖHM Diameter 500 mm Spindle mount DIN 55027 size 11 Chuck inner bore 200 mm Chuck height 145 mm Weight 182 kg Accessories / Special Features: • Hard turning and drilling jaws Pgjdpfx Adjpmtgne Ser • 1 chuck key Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, three-jaw chuck, three-jaw lathe chuck -Manufacturer: SCA Skand Chuckfabriks, precision three-jaw chuck chuck size Ø 230 mm -Jaws: individually and fully adjustable -Passage: Ø 66 mm -Bolt circle: Ø 193 mm / M12 -Dimensions: Ø 230 x 130 mm Pedpfxeux Safs Ad Sjgr -Weight: 21.2 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Pgjdpswtl Rnjfx Ad Ser -Manufacturer: AROWA, three-jaw chuck chuck size Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 175 mm / M10 -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø200 x 105 mm -Weight: 13.8 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing Pjdpoq Ei Enjfx Ad Sjgr -Total dimensions: 70/80/H50 mm -Total weight: 1.5 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set Podpfx Asq Ei Duod Ssgr -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 65/80/H45 mm -Total weight: 1.2 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard Pedpfx Adsq Ei D Aj Sogr -Jaw width: 22 mm -Dimensions: see photo techn. drawing -Total dimensions: 80/90/H55 mm -Total weight: 1.8 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set Pjdpfx Adoq Tvqrj Sogr -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/80/H53 mm -Total weight: 1.6 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 32 mm Pgedpfolg H Nlex Ad Ssr -Dimensions: see photo technical drawing -Overall dimensions: 125/130/H70 mm -Total weight: 5.4 kg

Condition: excellent (used), SCHUNK SVP-2 201760 TRIBOS S clamping device Pedpfx Adjzhrfxj Sogr SRE reducing inserts Z7 (10 pieces) In very good condition.

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck holder MK4 Pjdpfxowuca Ae Ad Ssgr -Chuck size: Ø 100 mm -Passage: Ø 20 mm -Dimensions: Ø 100 x 200 mm -Weight: 3.8 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: from a Meuselwitz lathe, chuck size 315 mm diameter -Passage: Ø 103 mm / Cone Ø 120 mm Pgjdpfx Ajgvm Dbjd Ser -Bolt circle: Ø 190 mm -Weight: 49 kg