6
Lathe chuck, power chuck RÖHM type KFD-F 500/3
Ident. No.: 421410
B0mfyktxgj
Diameter 500 mm
Conical centering ring receptacle taper size 15 = Ø 285.8 mm
Jaw reception 90° pointed toothing
Groove width jaw receptacle 25,5 mm
Total jaw width serration with groove 60 mm
Actuating force max. 9500 daN
Speed max. 2500 rpm
- Power chuck without passage
- Central tension screw: M30x 3,5 mm
- Fastening screws lathe chuck 6 pieces M24x 3 mm
Weight 253 kg
Further power chucks under stock numbers: 56823, 5...
6
3-jaw power chuck
Make SCHUNK Type: ROTA THW Plus 315-104
Bj.2021 in very good condition as new with existing accessories
Suitable for CNC lathe
Qhlc9
DMG MORI CTX BETA 800 TC .
4
STOCK AVAILABLE AT
Zcao0k9d
Type: KFV-400-3-A15
Manufacturer: SMW
Condition see pictures (in stock)
Description:
• Power operated 3-jaw special wedge hook chuck.
• Designed for external and internal clamping
• Centrically clamping
• Spindle side mounting according to DIN 55026, size A15
• With individually adjustable base jaws
• Top jaw side interface with 3/32 "x90° pointed teeth
• Chuck outer diameter: 400 mm (Swing: 430mm)
• Adjustment range / jaw: +/- 1.5 mm
• Center position is indicated...
1
Diameter 200 mm
Tightening bolt M 20
with flange and top jaws
H8ry3bsow
5
Hydr. 3-jaw power Chuck Fabr.FORKARDT type: 3KS630 bj.ca. 2005
Diameter. 630mm
With 1Parr hard Aufspannen JAWS
Lxkc2
FMAX 13000daN
Max speed 1200 RPM
Good condition.
Discover more used machines
3
Three-jaw Chuck
Bdof7r7xog
Mount MT 3
Diameter 130 mm
with indoor and outdoor baking
2
Hydr . Power chuck Röhm KFD-F 500/3, second-hand
diameter : 500 mm
Clamping force max : 11 000 daN
speed max : 2500 1/min
T3f7ahg
incl. 5 sets of jaws and hydr. clamping cylinder
2
3-jaw wedge bar chuckFabr.SMW Typ:HG 200 bj.ca.2000Bore 50mmFlansch Aufnahme Diameter 170mmWithout jaws,with chuck key.chuck in good condition.
Gvxqcw
6
3-jaw wedge bar lathe chuck FORKARDT TYPE F+160
Bpclnaeo
No. 1659 181
Identical in construction Forkardt F315 or SMW
diameter: 160 mm
Inner diameter: 45 mm
Chuck flange: short taper DIN 55022 size 6
1 set of chuck jaws consisting of base jaws and hard top step jaws for turning
1 set of chuck jaws consisting of base jaws and soft top step jaws for turning
- central adjustment
Weight: 11 kg
sound condition
4
5228
3-jaw eccentric lathe chuck
RÖHM
C2y8ou88
Spindle mounting M45 DIN 800
7
Mounting, bolt circle 130 mm, 4 x 130, 60 degree spacing, h-90mm
Gt8qnflmk
9
three-jaw power chuck D 210 mm used, fully functional
Cbnrnsua
for spindle head A2-6
incl. 35 sets of used soft jaws
ex location Heddesheim
1
.
Diameter : 315 mm
Passage approx. : 100 mm
Mounting : DIN 55027 / KK 8
Condition : used
.
Cfqyq9kfop
incl. mounting bolt , clamping key and 1 set of base jaws
.
4
Three-jaw Chuck
Make Roto record
Type DH 200-3
UNUSED with 2 sets of JAWS
Weight 14 kg
90pxb22tv
3
3- Jaw chuck
Manufacturer: SMW
Omhblt2h
Type: KNC S 140
Price: 680,-€D
11kg; D=1400mm ; H=19sm.
H4-R1/F1F-3
5
3-jaw power chuck
Jaw stroke via clamping cylinder and draw tube
No. 145270 with through hole.
Cylindrical flange mount according to DIN 55027.
Nxooz
Short taper, taper size: KK6
Three-jaw power chuck with quick-change system
and reversible step block jaws.
Base jaw type: Helical toothing FGB200, SGB200
Drawtube connection M52 x 2 mm
Cylindrical mounting for spindle flange ø 170 x 6 mm
Mounting hole circle for 3x ZK screws approx. 135 mm
Year of manufacture is estimated.
The chuck is in a, like ...
4
1 used 3-jaw face spiral lathe chuck
Manufacturer: RÖHM
Type: 160 6 1/4"
Technical data:
Faced spiral lathe chuck with central adjustment of the clamping jaws
diameter: 160 mm
Inner diameter: 42 mm
Chuck flange: Camlock DIN 55029 size 4 (cone Ø 63 mm)
- 1 set of chuck jaws stepped outwards
Huefyxrvk
Weight: 8,5 kg
3
Nr. 4573:
Bbsiekbmxf
1 gebr. 3 - Backen Kraftspannfutter
Fabr. FORKARDT
Typ 3 KTNC 315
Drehzahlbereich max. 3150 min-1
Ø 315 mm
10
We offer you:
3-jaw chuck
Manufacturer: Röhm
Type: Gamet Super D: 280 mm
Free shipping within Germany;
International shipping on request
Item no.: 001781
Immediately available
Faquu08t
8
We offer you:
Cbrizgxhze
Three jaw chuck with hard jaws
Manufacturer: SMW Autoblock
Type: HI-GRIP HGN-210-60-3
diameter: 210 mm
with hard base jaws
Free shipping within Germany;
International shipping on request
Item no.: 001774
Immediately available
1
3 jawed chuck Ø 530 mm
Qwtm7
1
3 jawed chuck Ø 630 mm
Fhngedex
6
Lathe chuck, power chuck RÖHM type KFD-HF 315/3
Ident. No.: 411193
Diameter 315 mm
Lathe chuck mounting short taper DIN 55027 size 8 with 4 mounting holes M16
Actuating force max 7000 daN
Speed max. 4500 rpm
Jaw mounting 90° pointed toothing 1/16".
Groove width of jaw mounting 21 mm
Total jaw width serration with groove 49,5 mm
Connection thread draw tube M90 x 2 mm
Central bore Ø 85 mm
- Lathe chuck mounting screwed to the chuck, short taper DIN 55027 size 8 (taper diameter approx. 139 mm)
- Dr...
5
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks
-Clamping force: max. 90 KN
-Equipment: short taper 6 (106 mm)
-Chuck size: Ø 210 mm
Bjzip7wpxz
-Weight: 22 kg
5
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks
-Chuck size: Ø 330 mm
-Tensioning force: max. 1500 daN
-Shot: short taper 8
-Weight: 79 kg
Bm2djz3zbb
5
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks
-Chuck size: Ø 330 mm
-Tensioning force: max. 1500 daN
-Thread: M16
-Weight: 83 kg
Bm2deohtyp
4
Size: 1/16" x 90° serration
Manufacturer:SCHUNK;
Condition : Good
Use for-chuck types: BERG FORKARDT SCHUNK RÖHM
Chuck sizes: ø 250 mm + ø 315 mm
width : 50 mm
height: 55 mm
length: 110 mm
Hole spacing: mm
9hc0qi
F-slot : mm
Groove width : 21 mm
3 mounting holes for sliding blocks
traces of use visible, toothing top
7
New 3 jaw selfcentering chucks BISON available from Stock:
3204-160-6350
3544-400-55029-11P
3544-400-55029-8P
New 4 Jaw Independent Chucks from Stock
3234-500-55027-11
3514-200-55026-6
3514-250-55026-6
3535-315-55027-11
3244-250-55029-8
3234-200-55027-5
3234-400-55027-11
3534-250-55027-6
3575-400-6350
3434-315-55027-8
7ivmzuesb
400 mm
ASK FOR BEST PRICE
1
3 jawed chuck with extended jaws Ø 320mm
Cemarsunmr
10
1 set = 3 pieces soft, as good as new top jaws
partly slightly pre-turned
pointed toothing 1,5 x 60°
chuck types: Kitagawa Howa B210 BB210
Chuck size: approx. ø 250 mm
suitable also for many others,
for example HOWA 10" ,Auto Strong 10" ,SMW SCHUNK
Chuck types: Kitagawa Howa B210 BB210
Jaw dimensions:
Width: 40 mm
Height: 40 mm
length: 110 mm
hole spacing: J = 30+30 mm
C9pcrdwhe
for fixing screws DIN 912 = M12
F-slot => N= 16mm
Without sliding blocks
2
Feed speed min. 2 m / min.
Feed speed max. 12 m / min.
Speed change - number of gears / stepless.
Number of feed rollers 3 pcs.
Roll diameter / width 75.50 / 28 mm
The distance between the rollers is 12.60 / 37 mm
Center-to-center distance of the roller 88.60 / 112 mm
8.3 mm roller spring deflection
Engine power 0.09 kW
Bvxbshsarp
Voltage 230 V
Weight approx. 10.5 kg
6
diameter: 400 mm
passage: mm
width: 160 mm
weight of the machine approx.: 159 kg
dimensions L x W x H: mm
revolution per minute: 3000 U/min
Merkmale:
B7wpwiqh7j
automatisches spannen
Kraftspannfutter
Flanschaufnahme Ø 298 x 32mm
Fmax: 110 kN
Fges. 250 kN
6 Formbacken
5
diameter: 430 mm
passage: mm
width: 240 mm
weight of the machine approx.: 237 kg
dimensions L x W x H: mm
revolution per minute: 1500 U/min
Power chuck for EMAG No. 5875620
Bh97h2bg
features:
automatic clamping
Flanged bore inside Ø 186mm
through hole Ø 197 x 64mm
3x clamping bolt M20x250mm
Fmax: 5000 daN
2Set of forming jaws
4
diameter: 200 mm
passage: 50 mm
width: 65 mm
weight of the machine approx.: 45 kg
dimensions L x W x H: mm
stationärer Spannstock SSH 200
Kraftspannfutter, hydraulisch
Merkmale:
Futterflansch Ø 280 x 17mm mit Spann-Nut 4x / 18x30mm
B7wp3qy8b8
Grundflansch Ø 290x30mm
Flanschaufnahme Ø 140x10mm
20 Satz div. Formbacken
4
diameter: 200 mm
passage: 50 mm
Yria9bf2
width: 65 mm
revolution per minute: U/min
weight of the machine approx.: 46 kg
dimensions L x W x H: mm
stationärer Spannstock SSH 200
Kraftspannfutter, hydraulisch Kraftspannung 53 kN
Merkmale:
Futterflansch Ø 280 x 17mm mit Spann-Nut 4x / 18x30mm
Grundflansch Ø 290x30mm
Flanschaufnahme Ø 140x10mm
20 Satz div. Formbacken
5
diameter: 300 mm
passage: mm
width: 165 mm
weight of the machine approx.: 88 kg
dimensions L x W x H: mm
revolution per minute: U/min
B7wpxfdyzm
EMAG Nr. 20012826 X0501
Merkmale:
automatisches spannen
Flanschaufnahme Ø 140 x 13mm
Durchgangsbohrung 48mm
Spannbolzen 3x M16x170mm
Pmax: 60bar
5
diameter: 260 mm
passage: mm
width: 125 mm
weight of the machine approx.: 50 kg
C0qdjvp
dimensions L x W x H: mm
revolution per minute: 4700 U/min
Merkmale:
neuwertig
automatisches spannen
Spannbereich außen 120mm
Spannbereich innen 50mm
Flanschenaufnahme innen Ø170 x 6mm
5
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set
-Top jaws: turning jaw set 4-piece hard
B8ymz2ftkk
-Jaw width: 34 mm
-Total dimensions: 130/135/H80 mm
-Total weight: 7 kg
5
Power chucks for vertical and horizontal CNC lathes
Manufacturer: SCHUNK Type: ROTA NCO260 year 2010
diameter 260 mm with intermediate flange diameter 220 mm
spindle nose in flange DIN 55028 / A6
Thread in tie rod M24
N max: 4500 rpm
Dgol9ax
In good condition.
2.pieces available
Price is for 1.piece.
8