Carpentry tenon cutter SCHNEIDER SK A-3
very good condition
the construction is very robust and torsion resistant
cutting height is max. 245mm
cutting depth is max. 260mm
the journal width can be adjusted with a handwheel and scale from 0- 120mm
with hardened and ground guide rods, so the moving parts are very smooth running
Btw7efnzou
the machine parts are almost all made of grey cast iron
the upper saw blades can be adjusted individually in depth, thus the tenon can be cut slightly offset, thi...
Balancer
Make: DALEX
Type D 3 -5
Fh37qt2
Traglast 3 -5 kg
Seilauszug 2000 mm
Eigengewicht 2,9 kg
With 200mm 4 th Axis Manufactured 2001Serial No. 26386
Control Haas
Table size 1219mm x 457mm
Table load 1810 kg
Longitudinal traverse X Axis 1016mm
Cross traverse Y Axis 508mm
Vertical traverse Z Axis 635mm
Speeds 7500 rpm variable
Feed rate 25,400 mm/min
Spindle nose to table 102mm - 737mm
Spindle taper BT 40
Automatic tool changer Yes
Fxe8l7w
Number of tools 32
Input 415/3/50hz 20 hp
Fitted with Swarf conveyor ,Coolant, Enclosed interlocking guarding
Equipment 200mm 4 th Axis, coolant tan...
Three-phase motor, electric motor
-Power: 3 kW
-Speed: 945 rpm
-Shaft: Ø 28 mm
Dv32dd8rs
-Construction: B3
-Dimensions: 445/315/H250 mm
-Weight: 60 kg
sheet width 2550 mm
plate thickness 25,0 mm
pre-bending 20,0 mm
diameter of upper rolls 300 mm
side roll diameter 220 mm
Cvfjenly
diameter of lower rolls 220 mm
total power requirement 11,0 kW
weight of the machine ca. 8.000 kg
dimensions of the machine ca. 3750 x 1660 x 1680 mm
** New price ~ 90.000 euros
Furnishing:
- hydraulic 3-roll bending machine
- with conical bending device
- including 1x CENTER sheet metal support
* electr. / hydr. can be moved via the controls
- Hydraulic folding s...
table diameter 560 mm
table load 0,3 t
swivelling range 0 - 90 Grad
turning speeds 0,25 - 4,0 U/min
360 Nm
welding current 500 Ampere
total power requirement 0,4 / Hand kW
Self-locking gear, therefore no forward and backward at eccentric
Blnscwt2xn
Load.
Electronic components from Schneider, Siemens and Delta.
Frequency-controlled stepless speed of the turntable.
High stability due to the robust construction.
welding power transmission
CE certificate.
Very good price / quality...
Used Machine - Mitutoyo Crysta Plus 574
Here I offer a very well-maintained 3-D coordinate measuring machine from the manufacturer Mitutoyo. The machine was used exclusively in an air-conditioned measuring room. It is a TOP equipped machine with which you can start immediately!
Of course, we can also offer transport, setup and commissioning as well as calibration (factory or DAkkS) so that you do not have to worry about the individual items!
Leasing possible.
Btxuqqgijd
(All prices are NET)
Three-phase motor, electric motor
-Power: 3 kW
-Speed: 945 rpm
-Shaft: Ø 32 mm
-Construction: B3
-Dimensions: 445/315/H250 mm
-Weight: 60 kg
2qucze
3-D coordinate measuring machine ZEISS NUMEREX
Granite measuring plate, granite measuring plate, measuring table
Model No. 3648-18, Serial. No. X-1019, year of construction approx. 1986
Measuring range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm
Measuring plate L x W 1525 x 1435 mm
Uoaivas
Usable area 1525 x 1100 mm
Measuring plate thickness 305 mm
Passage width in the portal 1100 mm
Probe holder Ø 9,5 mm
Compressed air connection 6 bar
Mains connection 230 Volt, 50 Hz.
- Granite...
table diameter 560 mm
table load 0,3 t
swivelling range 0-90 Grad
table turning speeds 0,25 - 4 U/min
Muu2kk
Torque max. 360 N/m
centre of gravity max. 150 mm
total power requirement 0,4 kW
weight max. 3000 kg
workpiece diameter 20 - 1500 mm
drum diameter 100 x 200 mm
connected load frequency 230 V
Blns7q7wch
speed 100 - 1000 mm/min
dimensions 0,8 x 0,37 x 0,36 m
total power requirement 0,12 kW
General information
Date of construction: 2009-02-02
Mileage: 999 km
Cab: Day cabin
Reference number: eS222166
Drivetrain
Fuel tank: 300 litres
Transmission
Transmission: 8 gears, Manual gearbox
Axle configuration
Axle configuration: 6x4
Suspension: leaf suspension
Front axle: Tyre size: 12R24; Steering; Tyre profile left: 100%; Tyre profile right: 100%
Rear axle 1: Tyre size: 325/95R24; Tyre profile left: 100%; Tyre profile right: 100%
Rear axle 2: Tyre size: 325/95R24; Tyre profile left: 10...
Three-phase motor, electric motor
-Power: 3 kW
Dv38cpwz3
-Speed: 940 rpm
-Shaft: Ø 35 mm
-Construction: B3
-Protection class: -
-Dimensions: 440/350/H300 mm
-Weight: 60 kg
* General * SKU040C133 * LocationBarneveld * MakeMixaco Maschinenbau GmbH Neuenrade * TypeLabormischer Lab CM 3-12-D * 010914 * Year of construction2002 * Material * MaterialStainless steel * Key Features * Cold mixer/Container mixer (1x) * Capacitymax. 12 Ltr (useful) * Vessel sizesdia. 260x160mm (2x) * With cover(cover is jacketed), Max. 0,5 bar * Manual operated outletdia. 80mm * With motor3,0 KW, 230/400 Volt * With variable speed drive(frequency inverter) * Information * Mounted on frame *...
COMPLETELY OVERHAULED!!!
UVV tested
Battery and charger
Triplex mast
Integrated sideshift
Voltage 48 V
Overall height 2,130 mm
Btuidqpz7l
Lifting height 4,750 mm
2 front working lights
Indicator and stop light
Max. Load capacity 1,500 kg
dimension of workpiece 400 x 200 x 200 mm
0ejehldd
voltage 0 V
WINWERTH Software Version
total power requirement kW
weight of the machine ca. 300 kg
dimensions of the machine ca. 2000x950x1900 mm
Control
The opportunity of creasing, folding and gluing all in one.
Dimensions 5,2 x 1,2 x 1,65 m
Bol0k32vqj
Feeder Mode: Flat pile feeder, Pocket Type: Gate fold buckle, Pocket Configuration: manual, Rollers Configuration: manual, Roller condition: n/a, Working width max: 520 mm, Fold length max: 1.200 mm, Gluing unit not included, Delivery mode: Shingle delivery with pressing, Sheet size max: 520 x 1.200 mm, Sheet size min: 150 x 200 mm
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve
Ql2t3vvjm
-Magnetic valve
-Series: W402
-Weight: 0.9 kg
I am offering a very good 3-D Coordinate Measuring Machine. Service and calibrated constantly. The machine was always located in a climated measuring room. This machine is excellent equiped, which means you can directly start to use it with all features.
Transportation, Installation and calibration can be included in the offer, so you do not have worry about it!
Specifications see attached PDF.
Leasing possible.
(All prices are NET)
Dx7vmyupc
Remote control with frequence
Foot switch control with frequence
K3fynshj
Load capacity per section:1500Kg
Vessel range Minimum: 200Ø
Vessel range Maximum: 1500Ø
Variable rotation: 80 - 950 Rpm
No of wheels per section:2
Wheel dimensions: 200 x 100 mm
Length: 1.010 mm
Width: 350 mm
Height: 457 mm
Weight: 200 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It ...
table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 375
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable ...
Probe head: mechanical
Control: Stiefelmayer
Btrfdq37zf
Measuring range
X-axis mm: 4500
Y-axis (height axis) mm: 2000
Z-axis mm: 2200
Basic machine dimensions
Length approx mm: 4500
Width approx mm: 2300
Height approx mm: 3030
Minimum room height mm: 3230
Total power requirement kVA: 0.5
Documentation: yes
Errors in the technical data reserved.
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve
-Magnetic valve
Ql2qtyxnb
-PN 3-10 bar
-Price: per piece
-Number: 6x available
-Weight: 1.1 kg
Here I offer a very well-maintained 3-D coordinate measuring machine from the manufacturer Mitutoyo. It is a TOP equipped machine with which you can start immediately!
Bspslldco3
Of course, we can also offer transport, setup and commissioning as well as calibration (factory or DAkkS) so that you do not have to worry about the individual items!
Specifications see attached PDF.
Leasing possible.
(All prices are NET)
table height: 800 mmmessurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 355
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enab...
Bench grinder, grinder, stand grinder, stand grinder
-Motor power: 0.50 kW
-Speed: 3,000 rpm
-with: stand
C0ii0g0xo
-Max. Grinding wheels: Ø 175 x 20 mm
-Operating voltage: 380 volts
-Dimensions: 500/540/H1870 mm
-Weight: 100 kg
ROLLER TRANSPORTER type PRN-6.3
Producer: MCRS
Type: PRN-6.3
Year of production: 2018
Product number: 18014/1
Working height - 920 mm +/- 50
Roll working width -1610 mm
Total width - 1700 mm
Roll diameter - 53 mm
Total length - 6300
Movement speed - 20 m / min
Weight - 320 kg
Power supply - 400V 50Hz 6 bar
AUTOMATIC CAB SPRAY CEFLA EASY 2000 D
Producer: CEFLA
Type: EASY 2000
Year of production: 2005
Product number: 05026/4
Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun...
Complete PAINTING STREET w. overhead chain conveyor in electrostatic process with high rotation disc (OMEGA GRINDING).
PLANT is in OPERATION, so can be inspected in operation.
Probably free in the next months.
Detailed process description: see 2 x PDF documents.
Further TECHN. DATA:
approx. space requirement: W 20 x L 30 x H 9 m.
the height is determined by the lifting device.
Solvents & paint mist are sucked off & burned off afterwards
Plant is definitely complete incl. software, externally onl...
table height: 800 mmmessurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 481
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus en...
WAB Turbula / Willy Bachofen AG
Model Turbula T2C
Serial Number 881054
K2e9jfw2
Elec 1 x 220V 50Hz 180W
Number of revolutions / min 22 - 96 per minute
Dimensions (mm) 600 x 480 mm H 400 mm
we offer
Temperature control unit Wittmann Tempro plus D 160 3~380V 10kW Bj 2018 like new on rollers
Manufacturer:wittmann Vienna
Series: TP+ D-S-1:160,SO-A.E.I.6
Type: Tempro D 3 TV00000917+204
Art.No TX 00001468
Year of manufacture 05/2018
Technical data (series)
Self-optimizing microprocessor +- 0,2°C
Automatic filling & level monitoring
Monitoring of maximum temperature
Automatic detection of pump rotation direction
Sensor break monitoring
Heater control via solid state relay
Dry run protec...
Three-phase motor, electric motor
-Transfer in current condition as seen
-Foot damaged, see photo
-Power: 3 kW
-Speed: 1440 rpm
-Shaft: Ø 22 mm
-Construction: B3
-Protection class: IP 33
-Price: per piece
-Number: 1x available
-Dimensions: 530/330/H260 mm
-Weight: 51 kg
Xuczw72uj
Used machine - Zeiss UPMC 850
Brsabgq09s
Here I offer a very neat 3-D coordinate measuring machine from the manufacturer Zeiss. The machine was only used in an air-conditioned measuring room. This is a TOP equipped machine with which you can start immediately!
We can of course also offer you the transport, assembly and commissioning as well as calibration (factory or DAkkS) so that you do not have to worry about the individual things!
The machine has the following accessories:
- VAST Gold pr...
3D coordinate measuring machine incl. screen with keyboard and processor !
Model:
Make: Keyence
Control unit: VL - 350
Measuring head: VL - 370
Base with object table: VL - 360
Bskfpxs0w2
Measuring range:
Low magnification: Ø 300 mm x H 200 mm
High magnification: Ø 70 mm x H 50 mm
Display resolution: 0.1 µm
Repeatability: 2 µm
Measurement accuracy: ± 10 µm
Imaging element: 1" 4 megapixel - monochrome - CMOS image sensor 1"4 megapixel monochrome C-MOS image sensor
Light projection optics: offset...
