Used 3 Axis for sale (68,040)

Condition: new, Year of construction: 2024, 1000 kg load capacity complete set incl. hand and double foot remote control Height-adjustable welding turntable with through hole 200mm Plate diameter 900mm Horizontal height min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.1 rpm Lredpfx Aler Tr A Uj Ijn Tilt up to 135° Hand and double foot remote control with speed display Very robust Chucks available at extra cost depending on model and size

Condition: ready for operation (used), load capacity: 750 kg, 3-axis welding positioner, 750 kg load capacity, control panel Tilt and speed infinitely adjustable from 0.05 to 1.0 rpm Ledoxxvgzepfx Al Iern Clamping plate diameter: 0.8 meters Height when tilted to center min. approx. 0.45 m + 0.1 m base, max. 1.1 + 0.1 m base Height horizontal min. approx. 0.56 m + 0.1 m base Length 2.0 m, width 1.05 m

Condition: new, 3D grid table 2000 x 1000 x 200 mm, 100 mm pitch, plate thickness 22 mm, hole diameter 28 mm. Machined flat, very robust, weight approx. 750 kg. Supplied with table leg suitable for all standard accessories with 28 mm. Price is without accessories. Additional charge of €500 for a set with half the pictured quantity. Lsdjvlli Ajpfx Al Ijrn

Condition: new, Year of construction: 2025, 3D hole table 2000 x 1000 x 200mm, 100mm grid, plate thickness 22mm, hole diameter 28mm, precision-machined, very solid, weight approx. 750 kg. Includes table base suitable for all standard accessories with 28mm. Price is without accessories, accessories as shown special price €250. Plasma nitriding €800 extra (impact-resistant, scratch-resistant, stainless). Lsdpfx Aow H Abksl Isrn Shipping within Germany €250.

Condition: new, 3D perforated table 2400 x 1200 x 200mm, grid 100mm, plate thickness 20mm, hole diameter 28mm, Lrjdovm Dk Iopfx Al Ien Plan machined, very solid weight approx. 950 kg With table base Price is without accessories

Condition: new, load capacity: 1,000 kg, Equipment: foot remote control, 1000 kg load capacity complete set incl. hand and double foot remote control (available from 600 kg to 10,000 kg) 3-axis weld positioner with adjustable height with through bore 200 mm table plate diameter 900 mm with T-slots, alternatively with screwed-on solid perforated plate 2000 x 1000 x 200 mm, thickness 20 mm, hole grid 100 mm, diameter 28 mm Lrjdpox Th A Hofx Al Ijn height (horizontal) min. 0.65 m, max. 1.25 m height (tilted) min. 0.45 m, max. 0.95 m speed from 0.01 - 1.1 rpm tilt up to 135° hand and double foot remote control with speed display very robust price without accessories, accessories available at very competitive surcharge table plate surcharge €1,900 (only in combination with positioner)

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Equipment: foot remote control, 3-axis welding positioner Protec KT 10 000 HV Complete set incl. hand and dual foot remote controls Digital speed display Ledpfxjx Th Sus Al Ijrn Hydraulic height adjustment Tilting range 0 to 130° Dimensions: Min. tilted height: 1050 mm Max. tilted height: 2200 mm Min. horizontal height: 1360 mm Clamping plate diameter: 2000 mm Length: 3250 mm, width: 1700 mm Speed from 0.05 to approx. 0.6 rpm (range from 0.05 to 1.2 rpm possible)

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, Equipment: foot remote control, rotational speed infinitely variable, 3000 kg load capacity welding positioner, complete set Horizontal load capacity: 3000 kg, tilted load capacity: 3000 kg 2 gears for tilt adjustment Lodjw T S Huopfx Al Iern Motor protected by two steel swing doors Very robust design Speed steplessly adjustable from 0.05 to 0.7 rpm (optionally up to 1.5 rpm) Turntable diameter: 1400 mm Tilt up to 120° Height horizontal: 1300 mm, tilted to center: 1050 mm Dimensions: Length 2.0 m x Width 1.4 m Handheld remote control with digital display and dual foot pedal

Condition: used, Year of construction: 2008, functionality: fully functional, 5-Axis Simultaneous Machining Center MAZAK Variaxis 630-5X II T with Turning Function and Top Specification. Control: MAZATROL Matrix Year of manufacture: 2008 Travel - X: 630 mm Travel - Y: 765 mm Travel - Z: 600 mm a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. work height: 500 mm Number of tool changer positions: 80 Tool holder: SK40 Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Swing diameter of workpiece: 730 mm Accessories: - Chip conveyor and tank - ICS (internal coolant supply) - Showa oil mist extraction unit - Renishaw probe The following features/options are available: - Linear scale system for X and Y axes - Tool magazine for 80 tools - Air blow unit at the workpiece - Oil mist extraction unit CRK 1500K - Coolant temperature control - Flood coolant 4.5 bar - Workpiece rinsing system - High-pressure coolant through the spindle 70 bar - Pressure switch for coolant supply through the spindle - Chip conveyor ejection right (Consep) - MAZAK Monitoring System B incl. Renishaw probe MP10 - Preparation for visual tool identification system - Detachable electronic handwheel - Milling spindle synchronous tapping Ljdpfex Db D Aex Al Iern - Tool tip inspection for 5-axis simultaneous machining - Tool radius compensation 5-axis - EIA dynamic tool compensation 2 (incl. 1) - Max. program memory 8 MB - Rapid traverse – constant tilt angle during movement - MAZACC-3D high-speed software package - Form compensation for rotary axes - Ethernet operation capability - High-precision control for finishing operations - Cylinder interpolation G07.1 - Signal light (3-color LED) - 3-jaw chuck 21" - Additional work area lighting The machine is in very good condition and can be inspected under power at its current location.

Condition: ready for operation (used), Year of construction: 2005, Pallet changer TOOLPAL 3 R 12 compartment Lredpfx Alor Hnglo Ien

Condition: used, mileage: 132,050 km, power: 130 kW (176.75 HP), first registration: 06/2022, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,836 mm, total width: 2,040 mm, total height: 2,798 mm, loading space length: 4,000 mm, loading space width: 1,780 mm, loading space height: 2,050 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 5883X ----Why autonext GmbH? One of the largest commercial vehicle showrooms nationwide. Always over 400 vehicles immediately available. Largest selection - Best price. More than 1,000 satisfied customers per year - Top customer reviews. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Top condition! 1st owner, German vehicle, non-smoking vehicle Fully serviced exclusively by Volkswagen Next service due in 450 days New brakes front and rear Equipped with 8 tires Summer tires on steel rims Winter tires on steel rims Body: Maxi super high-roof panel van Tow bar, increased towing capacity 3,000 kg Reversing camera Parking assist front and rear Cruise control Discover Media audio navigation system with streaming & internet (touchscreen, USB) Climatic air conditioning Reinforced suspension and stabilizers, front and rear Super high roof in vehicle color ErgoComfort suspension seat for driver's side ErgoComfort suspension seat for passenger's side ---- Special equipment: * Discover Media audio navigation system with streaming & internet (touchscreen, USB) * Voice control system * Multimedia interface 2 x USB (type C) in front * Bluetooth mobile phone interface * Mobile online services App-Connect wired and wireless * Lockable glove compartment * Tow bar preparation (tow bracket, socket, and wiring) * Trailer stabilization program * Airbag driver/passenger side, passenger airbag switchable * Dashboard with additional console * Exterior mirrors electrically adjustable and heated * Reinforced battery and alternator * Universal wooden flooring with lashing rails in cargo area, longitudinally adjustable * Driver assistance system: Parking assist front and rear * Digital tachograph * Chassis: Reinforced suspension and stabilizers, front and rear * Cab floor mats: rubber * Vehicle without type designation * Vehicle without lashing eyes * Cruise control incl. speed limiter * Body variant: Super high roof in vehicle color * Climatic air conditioning (cab) * Metallic paint * Multifunction steering wheel Lredpfxeym It Re Al Ion * Fog lights with integrated cornering light * Emergency call system * Digital radio reception (DAB+) * Reversing camera * Hinges for rear doors with increased opening angle * Seat upholstery: durable seat covers * Cab seats: ErgoComfort suspension seat, passenger side (20-way adjustment) * Cab seats: ErgoComfort suspension seat, driver side (20-way adjustment) * High wood panelling in cargo/passenger area * Lashing rails in load compartment - on side wall Standard equipment: Storage package 2, stowages: 2 DIN slots front under headliner, Interior lights in the cab: Reading light front, Anti-lock Braking System (ABS), Drive type: front-wheel drive, Convex exterior mirror left, Convex exterior mirror right, LED indicators integrated in exterior mirror, Rubber floor covering in cab, On-board tools, Underbody aerodynamic cladding, Twin headlights, Entry handle on rear left D-pillar, Entry handle on rear right D-pillar, Electronic Stability Program (ESP), Driver assistance system: Hill Start Assist, Driver assistance system: Brake Assist (HBA), Driver assistance system: Crosswind Assist, Electric front windows, Laminated windscreen, F...

Year of construction: 2014, condition: excellent (used), Powder / Ingredient Depositors Qty 3 available Lredpfx Alourf Tko Ion Stainless steel Year 2014 In excellent condition

Condition: excellent (used), Year of construction: 2011, Weishaupt gas burner, with Dungs gas piping DN 50 Burner type: WM-G10/3-A Design: ZM-LN Year of manufacture: 2011 Lrodpfx Ajzdku Rjl Ien Output: 125-900 kW

Condition: used, mileage: 110,000 km, power: 120 kW (163.15 HP), first registration: 08/2019, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space length: 4,250 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: - 2nd battery (auxiliary battery) in engine compartment - Overhead storage in cab headliner - Passenger airbags - Aluminum trim at sliding door step - Tow bar: ball head, for increased trailer load - 3.5 t - 13-pin trailer socket - Electric roof ventilator II (cargo/passenger compartment) - Cargo area ceiling light with door contact - Entry handle on rear left D-pillar - Entry handle on rear right D-pillar - Tachograph controls front under roof headliner - Chassis: Stabilization level II - Transmission lock for PTO - Grab handles on A-pillars - Additional main key - Rear door (opening angle 270 degrees) - Wooden floor in cargo area - Terminal strip for electrical connections (driver's seat base) - LED cargo area light - Cable duct at rear portal - Cable duct at side wall - Multimedia system MBUX (7" touchscreen) - PTO 2 B with layshaft - Parameterizable special module - Crossmember with integrated step - Smoker package - Spare wheel with same specification as driving tires - Spare wheel carrier under rear chassis incl. jack - Amber warning beacons (2) - Reversing camera - Acoustic reverse warning (external warning signal) - Wipers with rain sensor - Off-road chassis - Seat belt warning system with alert (passenger side) - Cabin seats: passenger double seat - Cabin seats: comfort driver's seat - Engine start/stop system - 12V socket in driver's cab - Additional separating relay with extra battery - USB port middle under dashboard (charging only) - AGM battery 92 Ah - Jack - Additional rear indicator lights (roof) Ledpfx Aley Nf T Us Ijrn Further equipment: - 2 extra main keys - Overhead parcel shelf - Aluminum protective strip, floor covering, entry - Trailer hitch for increased towing capacity 3.5 t incl. 13-pin socket - Fixing rails for roof rack - Passenger airbag - Passenger double seat - Warning film application - Hill start assist - Flat indicator lamps, extra rear on roof - Electric roof ventilator II - Load space ceiling light with door contact - Constant speed control - Eco start-stop function - Entry grip on rear left corner pillar - Transmission lock for PTO - Passenger seat belt warning device - Entry grab handles for driver and passenger - Wooden floor - Terminal strip for electrical connection - Controlled air conditioning TEMPMATIK - Comfort roof control unit - Comfort driver's seat - LED light strip in load compartment - M. Becker MobiE generator offer 18022287 - M+S tires - MBUX multimedia system with 7-inch touchscreen - PTO layshaft - Parameterizable special module - Crossmember with integrated step - Smoker package - Rain sensor - Spare wheel - Spare wheel holder under end of frame - Reversing camera - Reverse warning device - Double-wing rear door, opening up to side wall - Amber warning lights front left/rear right - Rough road version - Sortimo racking system - Stabilization level II - Socket in cab - Tank sender for auxiliary heater - Additional separating relay at battery - USB socket 5V - Additional features: Interchangeable ball/pin towing coupling - Additional features: Switchable additional hot air heating - Auxiliary battery for retrofit consumers, engine compartment 3rd brake light, storage compartment above windscreen, storage compartment below dashboard passenger side, adaptive brake light, driver's airbag, hill start assist, traction control (ASR), washer fluid level display, exterior mirrors electrically adjustable and heated, both sides, outside temperature display, cab roof lining, ...

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm Ledpfx Asza Eipol Iorn - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: refurbished (used), Year of construction: 1996, Universal tool milling machine KUNZMANN WF 4/3 Ledoq Ulucjpfx Al Iern With 3 axes Heidenhain digital readout Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 - 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X , Y , Z axis Hydraulic tool clamping Automatic central lubrication pump for X , Y , Z axis Machine light 4-piece machine shoes Coolant device Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICE TRAINING !!! THE MACHINE IS IN GOOD CONDITION !!!

Condition: used, diameter div. Lredpfsww Nbxsx Al Isn number 40x tool adaptor BT 40

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: 520511, Features: → Robust machine housing made of cast iron → Automatic application and release of the test force → Automatic switching between objective lens and indenter → LED illumination → Digital measuring eyepiece → LCD color touchscreen display → Conversion to other hardness scales (e.g., HRC/HB) → Simple operation Technical Data: → Test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000) → Testing method according to Vickers → Cross table 110 x 110 mm / travel range 25 x 25 mm → Eyepiece 10X → Automatic objective turret → Objectives 10X / 40X / 60X → Max. specimen height 90 mm → Max. specimen depth 110 mm → Compliance: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 50 kg → Power supply 230V / 50Hz Scope of delivery: → Hardness testing device Ljdpfxoc Ipcke Al Iorn → Diamond indenter 136° → Cross table 110 x 110 mm → Eyepiece 10X → Objective turret → Objectives 10X / 40X / 60X → LED illumination → Power cable → Accessory case → Operating manual OPTIONAL → VMS3 software (Video Measuring System) → Digital built-in measuring screw (for transmitting the edge distance to the VMS software) → Module "automatic measurement" (only in conjunction with VMS3 software) → PC system / monitor

Year of construction: 2023, condition: like new (used), machine/vehicle number: 530211, Properties: → robust machine housing made of cast iron → automatic loading and unloading of the test force → change between lens and indenter automatically → LED lighting → digital measuring eyepiece → LCD color display touch screen → Conversion to other hardness scales (e.g. HRC) → easy to use Technical data: → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Test method Vickers → Eyepiece 10X → automatic Revolver → Objectives 10X / 20X / 40X → Test force application 50µm/sec → height Capacity max. 210mm → depth Capacity max.160mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Standard delivery: → Hardness tester → Diamond indenter 136° Vickers → Flat Anvil Ø80mm → V-Anvil Ø80mm → Eyepiece → Objectives 10X / 20X / 40X → LED lighting → Power cable → Accessory case → Operating instructions Lrsdoc Ipc Uspfx Al Ien OPTIONALS: → VMS3-Software (Video-Measuring-System) → X/Y-Stage 200x200mm (Movement 25 x 25mm) → Digital micrometer (to transmit the edge distance to the VMS3-Software) → “Automatic measurement” module (only in combination with VMS3-Software)

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection Ledpfxepbbc Hj Al Isrn - Accessory case

Condition: like new (used), functionality: fully functional, Year of construction: 2023, - Automatic hot mounting press - Product details: - corrosion-resistant table model with automatic hydraulic hot mounting - electro-hydraulic automatic system - 7-inch user-friendly LCD touchscreen system - Preset programming and data storage Lrodpfx Ast Dvyfol Isn parameters (up to 100 memory locations) - Setting of heating time, cooling time, assembly temperature, pressure build-up and cycle start via the LCD touchscreen - Cooling process - slow cooling, medium cooling and fast cooling mechanism. - Easy replacement of the mold assemblies - Sliding locking mechanism - Automatic water cooling system - Timer buzzer display for heating and cooling cycles - Possible sizes: 1 inch, 1 ½ inch, 2 inch, 30 mm, 40 mm and 50 mm - Power supply: 230 V / 50 Hz - Machine color: 3-Rath design (grey/red)

Condition: like new (used), Year of construction: 2013, For sale is a functioning and very well-maintained gas burner from the Weishaupt brand, including gas piping (Dungs DN 80). Lodpfozamd Uex Al Isrn 1. Burner type: WM-G30 Output: 600-5700 kW Design: ZM Year of manufacture: 2013 Connection pressure: 15-500 mbar

Condition: excellent (used), Conventional lathe Manufacturer: ZMM Sliven Huvema Lrjdpfsy I Dqvsx Al Ion Inventory no. Model: HU310 x 750 Year of manufacture: 2007 Distance between centers: 750 mm Center height: 155 mm Swing over bed: 310 mm Spindle bore: 32 mm 3-jaw chuck Quick-change tool holder Voltage: 380 V Machine weight approx. 700 kg 3 units in stock!!!

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: 640M, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of slots in tool magazine: 120, number of axes: 5, This 5-axis Mazak Variaxis 630-5X was manufactured in 2003. It features a maximum X-axis travel of 630 mm, Y-axis travel of 765 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool magazine holding 120 positions and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Mazak Variaxis 630-5X vertical machining centre we have for sale. Contact us for further details. • Table size: 500 × 500 mm • Tool magazine capacity: 120 positionsCondition • Machine in working condition • Complete and fully operational • Sale due to reallocation of production assetsAvailability / Sale terms Ledpoy Ey N Nefx Al Iorn • EXW sale • Technical documentation available upon request • Available for commercial valuation • Possible technical inspection / site visit • Direct purchase negotiations possible Additional equipment • Pallet system: Palletech – 12 stations + 2 loading/unloading stations • Renishaw workpiece probe • Laser tool presetting • High-pressure coolant system: 18 bar • Belt-type chip conveyor

Condition: like new (used), Year of construction: 2015, For sale is a functional and very well-maintained gas burner, brand WEISHAUPT WM-G20 (2600 kW), with a gas manifold DUNGS DN65. WEISHAUPT WM - G20 (2600 kW) - Output: 350 - 2600 kW - Design: ZM - Year of manufacture: 2015 Lrjdszab H Depfx Al Ijn