Wire cutting EDM machine

MITSUBISHI MV 2400 R

Condition: used, Year of construction: 2017, Technical details: travel -x axis: 600 mm travel -y axis: 400 mm travel -z axis: 310 mm max. size of workpiece LxWxH: 1.050 x 800 x 295 mm max. workpiece weight: 1.500 kg table-size: 840 x 640 mm U-axis: + / - 75 mm V-axis: + / - 75 mm conical grinding: 15° / 260mm rapid traverse: 1,3 m/min wire dia.: 0,1 - 0,3 mm wire-forward-feed: max. 23 m/min weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,7 x 3,1 x 2,2 m wire eroding machine, autom. wire threading (AWT), chiller, tank incl. ion-exchange resins, clamping devices, reference tooling, aligning tools for wire, documentation aüürox. 9.100 h "machine on", approx. 4.200 h "working hours" Nwjdpfjx Hp Nhex Ad Neb *

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 193 34-41, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,600 mm, table load: 2,500 kg, spindle diameter: 102 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 1,600 rpm, total height: 3,500 mm, total length: 6,500 mm, total width: 4,700 mm, table length: 1,400 mm, table width: 1,250 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, The machine was overhauled and modernized in 2025 and is immediately ready for operation! Travel paths: - Table cross travel (X-axis): 1600 mm - Spindle head vertical travel (Y-axis): 1250 mm - Table longitudinal travel (Z-axis): 1475 mm (restriction due to large table) - Quill travel (W-axis): 710 mm - Table rotation (B-axis): 360 degrees Clamping table: - Clamping surface: 1250 x 1400 mm - Table load capacity: 2.5 t Spindle: - Diameter: 102 mm - Tool holder: DIN2080, SK 50 - Infinitely variable speed: 4 – 1600 rpm - Drive power: 13 kW Feed: - X, Y, Z axes, stepless: 1 – 4000 mm/min Rapid traverse: - X, Y, Z axes: 4 m/min Power consumption: 42 kW Weight: 10 t Space requirements (L x W x H): 6.5 x 4.7 x 3.5 m Nwodpfxjw Rn R Rs Ad Njb Equipment: - Heidenhain TNC 320 - Coolant device

Condition: like new (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Mitsubishi MV2400R precision wire EDM machine (2018), in excellent technical condition, continuously operated, fully functional, and ready for immediate use – very low operating hours (only 2,700 hours). Technical Specifications: - Year of manufacture: 2018 - Manufacturer: Mitsubishi Electric - Model: MV2400R - Control system: Mitsubishi M700 Series - Axis travel (X/Y/Z): 600 / 400 / 310 mm - Max. workpiece dimensions: 1050 × 800 × 295 mm - Max. workpiece weight: 1,500 kg - Worktable size: 840 × 700 mm - Wire diameter: 0.1 – 0.3 mm (0.25 mm currently in use) - Positioning accuracy: ±1 µm Nwsdoxu Hvlopfx Ad Nob - Power supply & cooling: complete and fully functional - Machine dimensions (L×W×H): 2687 × 3030 × 2150 mm - Weight: approx. 3,500 kg Equipment and Accessories: - Original upper and lower wire guides - Automatic Wire Threading (AWT) - Filter tank with ion-exchange resin - Complete set of clamping and locating devices (in carrying case) - Wire alignment device - Original operation manuals and documentation Additional accessories purchased for over €10,000: - Wire guides for 30° angle cutting (upper and lower) - Processor battery - Precision workpiece clamping vise - 0-600 PSI pressure gauge (2 pcs) - MV power contact (259320) (2 pcs) - CF card with software - 0.25 mm EDM wire – 3 new spools - 2 sets of new filters - Machine transport and handling system Condition: The machine is well-maintained, regularly serviced, and ready for immediate operation. Complete filtration and cooling systems included. We offer assistance with transport, installation, and commissioning of the machine, as well as operator training – we are EXPERIENCED. Price negotiable. VAT invoice available. Export (0% VAT) possible.

Condition: used, Year of construction: 2015, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Nwjdpfxox Hgg Dj Ad Neb

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Nwedpfxsxftqde Ad Neb Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Year of construction: 2013, condition: ready for operation (used), General Data Machine weight 3500 kg Control Unit Brand MITSUBISHI Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Y-Axis Movement 400 nmm Z-Axis Movement 310 mm Workpiece Workpiece X 820 mm Workpiece Y 305 mm Workpiece Z 1050 mm Workpiece weight 1500 kg Nwodpox D Iv Sofx Ad Nob Additional Equipment Wire diameter: 0.1 – 0.3 mm This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Application Types EDM

Condition: used, Year of construction: 2013, operating hours: 47,754 h, functionality: fully functional, machine/vehicle number: 52DR2077, workpiece weight (max.): 1,500 kg, travel distance X-axis: 620 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 300 mm, Equipment: documentation/manual, For sale is a used Mitsubishi MV2400R wire EDM machine in good, well-maintained condition. The machine is well preserved and has been handled with care. Nodpfsx Iukmjx Ad Newb

Condition: good (used), Year of construction: 2004, operating hours: 109,078 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine HOURS: 109,078 h Spindle HOURS: 22,117 h - Spindle HSK-A63 10,000 rpm - 32 tool pockets - Rotary table SRT 280 mm with integrated clamping system SK50 (if not required, this can be closed or alternatively converted for use as a zero-point clamping system) - External coolant supply - Internal coolant supply with paper band filter, 80 bar - Swarf flushing pistol - Chip conveyor - Handheld control unit - Automatic cabin door - 32 tool pockets plus 87 additional ZM87 positions - Thermal compensation - BLUM tool measurement on carriage - Renishaw probe - Chip container - Status indicator light The machine has been thoroughly inspected, and there is a geometry inspection protocol as well as circularity test measurements available. The machine can be viewed and tested under power at any time. Nwjdpfx Adoxcp Sls Nsb Very well-maintained condition.

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, type of input current: AC, table width: 840 mm, overall weight: 3,500 kg, table length: 640 mm, positioning accuracy: 0.003 mm, ### Price heavily reduced ### This machine is very well maintained and in very good condition. The machine is still in production. You can view and test this machine with power on. Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 MODEL: MV 2400R MV-R Series – Power for Precision Production hours: approx. 8,000 hours Application type: EDM / wire cutting Machine type: Wire EDM machine Technical specifications - Mitsubishi MV 2400R X-axis movement: 600 mm Y-axis movement: 400 mm Nwsdpfx Adovq Rh Uj Nsb Z-axis movement: 310 mm Travel (X / Y / Z) in mm: 600 / 400 / 310 Travel (U / V) in mm: 150 / 150 (+/- 75) Max. workpiece dimensions (W x D x H) in mm: 1050 x 820 x 305 Max. workpiece weight in kg: 1500 Table dimensions (W x D) in mm: 840 x 640 Overall dimensions (W x D x H) in mm: 2687 x 3030 x 2150 Machine weight in kg: 3500 Price greatly reduced.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 03DR2150, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, overall weight: 3,500 kg, Equipment: cooling unit, Wire-Cut EDM Machine The machine comes from productive operation and is in fully functional, used condition. All relevant assemblies are complete; the generator cabinet, control system, wire feed, and AT system (Automatic Threader) are all present and complete. Running times according to control system: Processing time: approx. 29,062 h NC on-time: approx. 43,836 h Ready-/TFT downtime: approx. 8,966 h Maintenance records (excerpt): Filter change: last performed at 176 h / 200 h Resin change: 21 h / 1000 h Oil refill: 742 h / 1000 h Conductivity sensor: 742 h / 1000 h Current supply rotation: 57 h / 80 h The machine is complete but shows typical signs of use after more than 10 years in operation Accessories are extensive and well organized Servicing always confirmed as per control system Automatic threading system included Accessories / Equipment: Original Mitsubishi nozzle & roller/bearing kit: various guide rollers upper and lower diamond guides nozzle set (upper/lower nozzle) drying stones / assembly tools NSK/Japan replacement bearings spare tension rollers Manufacturer’s wooden box Mitsubishi Electric Spare and consumables: resin container (packed) filter elements quick adhesive components A/B Njdpfx Asx Hadvjd Njwb pH test strips process chemicals (for EDM) logbook / maintenance records Documentation / manuals: complete folders: Operator’s Manual MV Part 1 & 2 training materials “Advance Series” operating instructions (German) maintenance and AT maintenance sheets Travels (X / Y / Z): 600 × 400 × 310 mm Working table / workspace: table size: 840 × 640 mm (square table) max. workpiece dimensions: 1050 × 800 × 295 mm max. workpiece weight: 1,500 kg Wire data: wire diameter: 0.1–0.3 mm max. wire feed: 23 m/min tension: 0.5–25 N automatic threading (AT), including fine-threading Taper cutting: opto-linear T/C device, ±75 mm (X/Y), max. taper angle 15° at 260 mm workpiece height Generator / Control system: transistor-controlled pulse generator 15" LCD touch control 6-axis simultaneous control integrated 2D and 3D CAM (Parasolid viewer) NC memory up to 1 GB USB interfaces (2×) Dielectric system tank capacity: 860 l filter flow rate: 50 l/min paper filters (2 pcs) resin container 10 l (ion exchanger)

Condition: new, BRAND NEW MACHINING CENTER HEIDENHAIN TNC 7 digital path control with 19" screen HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 650 mm Nwedjhy Artjpfx Ad Nob Y-axis: 700 mm Z-axis: 645 mm Table size (diameter): 410 mm Maximum workpiece diameter: 500 mm Maximum spindle speed: 12,000 rpm (oil-cooled with MQL) Spindle taper: SK 40-BIG PLUS (BVD 40) Maximum spindle motor power: 17 kW ICS – internal coolant supply – 20 bar Rapid traverse X, Y & Z: 30,000 mm/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm ATC tool changer with double gripper: 30 positions (optional up to 80 tools) Hinged belt chip conveyor Full enclosure Only inquiries from Germany will be answered.