Bench drill

UNION BFT 90/5 TNC

Condition: used, Year of construction: 2013, functionality: fully functional, HTZ 1200 SP EXTREME 15 HORIZONTAL LOG BAND SAW for big logs • production year 2013 • max. log diameter: 1,5 m • 45 kW main motor with frequency converter • automatic, hydraulic blade tensioning • automatic pre-cutter • automatic board guiding device • max. length of logs 12 m • 8 pcs hydraulic clamp + 1 pc support • 1 pc lifting clamp for taper control Dkodpfx Aox Adlgjfnsh • 3 pcs log turning device with left-right positioning • set of longitudinal rollers (3 pcs motorised, 1 pc simple) • automatic control • automatic, lifting belt conveyor for boards • dust extraction device • low working hours

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 490 mm, spindle bore: 155 mm, center height: 400 mm, turning length: 3,000 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 6 rpm, bed width: 700 mm, Turning diameter in gap: 1,050 mm, rotational speed (max.): 1,250 rpm, overall weight: 7,500 kg, three-jaw chuck diameter: 630 mm, ZMM Lathe CU800x3000, 2011, very little used, in excellent condition Specifications: Swing over bed: 890 mm Distance between centers: 3000 mm Spindle bore: 155 mm Bed width: 700 mm Spindle speed: 6.3–1250 rpm Weight: approx. 7500 kg Compliant with ARBO/CE Machine equipped with: • 2-axis digital readout • BISON 3-jaw chuck 630 mm Dkodpsxyf Ecefx Afnjh • BISON 4-jaw independent chuck 800 mm • 2 x fixed steady rests with roller fingers • 1 x travelling steady rest • Electrically adjustable tailstock • Tool post with 4 holders • Coolant system • Machine lighting

Condition: good (used), Used radial drill SASS Mod.TRM 2200 Excellent condition, fully functional. Cube supplied Maximum diameter drilling from solid cast iron 20-22 100 mm Maximum diameter drilling from solid steel R=60 80 mm Dksdpfxeikqz Ss Afnoh Sliding quill spindle diameter 102 mm Spindle morse taper 6 Spindle vertical travel 500 mm Rotational speed 32 Spindle speed values with 50 Hz motor - rpm/1' 18 ÷ 1600 Automatic feeds Maximum reach from column edge to spindle axis 2230 mm Minimum and maximum drilling radius 660 ÷2505 mm Head displacement on arm 1845 mm Vertical arm displacement 1040 mm Column diameter 550 mm Column height with motor 3720 mm Base plate height 260 mm Base plate height 2490 x 1230 mm Spindle motor 11 HP Weight 9000 kg

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: KME 2/750L, Tension carriage for saw frame Viewings are available by appointment. Dkodpov Umb Eefx Afneh

Condition: new, Year of construction: 2025, Through our many years of experience in service, we have decided to develop and produce our own milling machines. The FPS 500M is a conventional milling machine perfect for training and production. Through the Heidenhain Positip 8016 active digital display positioning and for example the creation and approach of a bolt hole circle is possible. Control Heidenhain Positip 8016 Active - Digital display Speed 0 - 3000 rpm geometrically stepped direct gear with 16 gear steps for maximum torque / milling power Feed rate 0 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill extendable quill, vertical 80 mm SK40 optional: horizontal work spindle or horizontal quill (approx. 100mm extendable) Pulling system: hydraulic tightening system - DIN 69872 optional: DIN 2080 Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x480mm Equipment - Vertical and horizontal spindle Djdoh Su Ipepfx Afnokh - Milling head manually tiltable +/- 90 °. - Travelling chip tray - Machine light - Central lubrication - Z-axis bellows Options - universal table - rotary table - Shaper head - dividing head - counterholder - etc. Further technical data can be found in the attached data sheet.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, spindle speed (max.): 2,500 rpm, total width: 1,000 mm, table length: 1,120 mm, travel distance W-axis: 710 mm, quill diameter: 100 mm, year of last overhaul: 2025, The machine is in very good technical condition after modernization in 2025, connected and available for testing. Heidenhain iTNC 530 control system. Accessories: tools, clamping angles, workpiece probe. Dkedpfxsxz E N Ds Afnsh

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Operating hours NC: 41804 Resonator hours: 14466 Beam ON hours: 2054 Y-Axis: 1300 mm Additional equipment: various tools Dodpswkd Efjfx Afnekh Recently installed new parts: Conversion to laser control TASC5 (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Dedpfx Afswf Sfvjnokh Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 S Dkodpjv Rxa Sefx Afnjh Year of manufacture: 1995 Operating hours: 65,071 Control unit: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: 20 – 6,300 rpm Tool holder: SK 40 M & H 3D probe (for workpiece sensing) Vertical-horizontal milling device Quill feed Coolant system Angle table: 900 x 458 mm Weight: 4,000 kg Machine dimensions (LxWxH, approx.): 3,900 x 2,000 x 2,000 mm Ref.: 3226

Condition: used, Year of construction: 1961, ram hammer weight 750 kg ram hammer stroke 660 mm no. of strokes 100 /min impact energy 2040 kJ distance lower die block / ram gudeway 6600 mm Throat 750 mm steel forging - rectangular up to 240 mm steel forging - diameter up to 270 mm power requirement 75,0 kW weight of hammer 16,5 t weight of anvil 15,5 t weight 32,0 t Dodsvuullepfx Afnskh dimensions (WxDxH) 3,2 x 1,45 x 3,45 m Forging hammer as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck video at seller's site before dismantling available