MAZAK VCS430A

MAZAK VCS430A

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 430 mm z-travel 510 mm control Mazatrol Smart table surface area 900 x 430 mm max. table load 500 kg number of spindle speeds 40-12000 U/min rapid speed 42000 mm/min tool magazine with 30 Plätzen max. tool diameter 125 mm weight of the machine ca. 4800 kg Just 4,362 hours of pure machining! Capacity: External dimensions of the machine table: 900 x 430 mm Travel range X/Y/Z axis: 560/430/510 mm Distance from spindle head to table surface: Min: 150 mm Max. 660 mm Spindle: Spindle speed: 40-12000 (two electrical stages) Feed rate: Hfedpfx Ajyukgijfcof Rapid traverse speed: 42000 mm/min Cutting feed rate: 1-8000 rpm ATC magazine: Tool magazine slots: 30 Tool shank type: MAS BT-40 Max. tool diameter: with adjacent tools: 80 mm without adjacent tools: 125 mm Max. total weight of tools in magazine: 120 kg Equipment/accessories: Coolant system Vices (not shown in the photo) Tool holders Tools Documentation

Condition: ready for operation (used), Year of construction: 2023, operating hours: 154 h, travel distance X-axis: 215 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 605 mm, total height: 1,725 mm, total width: 1,690 mm, overall weight: 4,650 kg, controller manufacturer: MAZATROL, controller model: SMOOTH Ez, number of axes: 3, This 3-axis Mazak QTE-200MY SG was manufactured in 2023. It features a maximum swing diameter of 695 mm, a standard cutting diameter of 235 mm, and a maximum turning diameter of 340 mm. The main spindle operates at speeds up to 5,000 min-1, with a motor power of 15.0 kW. It includes a 12-position turret and rapid traverse rates on the X, Y, and Z axes are 30, 10, and 30 m/min respectively. Contact us for more information about this machine. Additional equipment • Transformer for Europe (CE) • Roller guide with spherical roller bearings • SD memory card I/F + USB memory I/F • 1 Set of control keys • Foundation kit (steel plates) • CE Marking (With noise filter) • C-axis Positioning 0.0001° Increment • 12-Position Turret • Y-Axis Control • Interface bar feeder Extra Information Automatic part trapper Hodjx D R Svepfx Afcoff High pressure cooling Preparation for chip conveyor 8" Open chuck Measuring arm Signal tower Rotary center Chain chip conveyor with side discharge Cylindrical and polar coordinate engraving function Automatic pecking cycle with load detection Quick-change cutter holder system Bar diameter Workpiece Maximum swing diameter: 695 mm Standard cutting diameter: 235 mm Maximum cutting length: 535 mm Maximum turning diameter: 340 mm Maximum bar diameter: 65 mm Maximum chuck weight: 200 kg Maximum workpiece weight: 500 kg Distance between spindle nose and end of workpiece: 81 to 686 mm Turret Number of tool positions: 12 Tool size (External turning): 25 mm Tool size (Internal turning): 40 mm Tool size (Driven drill): 20 mm Tool size (Driven end mill): 20 mm Tool size (Driven tap): M20 Indexing time 1 step: 0.23 s Indexing time full revolution: 0.63 s Tail Stock Center bore (morse taper): MK No. 5 Tailstock travel (body movement): 565 mm Maximum thrust: 5000 N Tools Milling spindle power (continuous power): 3.7 kW Milling spindle power (40% ED): 5.5 kW Maximum milling spindle speed: 4500 min-1 Minimum milling spindle speed: 20 min-1 Media Tank capacity: 225 L Coolant pump: MTA70H-250 Power: 0.25 kW Compressed air flow rate: 75 to 370 L/min (ANR) Dimensions Machine Depth 2785 mm

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 900 mm, travel distance Y-axis: 430 mm, controller manufacturer: MAZATROL, controller model: Smart, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3s Mazak VCS 430A vertical machining centre was manufactured in 2011. It features a powerful 18.5 kW spindle with a speed of 12,000 rpm and a table size of 900 x 430 mm. The machine offers rapid traverse of 42 m/min and includes a high-pressure coolant system, synchronized tapping, and tool length measurement. If you are looking to get high-quality machining capabilities, consider the Mazak VCS 430A machine we have for sale. Contact us for further details. • Operating hours: 33,000 • Spindle hours: 22,000 • Rapid traverse: 42 m/min • Installed options/software: • High-pressure coolant (through-spindle), 15 bar • Synchronized tapping • Tool length measurement • Workpiece air blast • Hand-held coolant nozzle • Automatic peck drilling cycle with load detection • G00 slope constant function • High surface smoothing on contours (High Smoothing Control) • Mazatrol-to-ISO program conversion • Program memory expansion Hodpoyhcviofx Afcjff • Preparation for workpiece probe (OMP60) • Preparation for chip conveyor (left side) • MAZACC-3D high-speed software package • CNC functions and connectivity: • NC user macros • Mazak drilling/tapping cycles (Mazatrol & EIA) • EIA/ISO code input • Constant tool tip speed function • Programmable block stop (M01) • Background tool path verification (MAZACC-2D) • Up to 300 workpiece coordinate systems • Thread cutting functions • EIA canned cycles (chamfering, arc machining) • USB interface (2 ports) • LAN port Additional equipment • Chip conveyor, left-hand, hinge type (Mayfran) • 4th-axis simultaneous kit: Kitagawa NC rotary table (MR200) Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2007, turning diameter 140 mm turning length 615 mm control C200-4D spindle passage 65 mm turning speeds 5.000 U/min Hjdpfx Afewzynqocsff max. torque at 40% / 100% load 145 / 105 kW turret-slide 1,2 und 3 x-travel 110 mm z-travel 360 mm y-travel 70 mm rapid traverse X/Y/Z 25/12/45 m/min slide travel X-axis 150 mm Z- Travel 600 mm turning speeds 5.000 U/min B - axis B-Korrekturachse +/- 1 ° tool turret - number of stations 3 x 12 tool taper DIN 69880 VDI 25 x 48 C-axis 0,001 ° total power requirement 61 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 9,75 x 3,10 x 2,85 m Loading: Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005 for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: BREUNING ILS-REX-7208 automatic workpiece unloader, built in 2007

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (max.): 42,000 rpm, table diameter: 450 mm, 5-axis Röders Tec RXP800DS -completely overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance height: 500 mm Tool changer: 52-way Spindle: HSK40E max. 42,000 rpm Tool measuring laser for tool measurement Handbox Minimal quantity lubrication Prepared for extraction system (e.g. for graphite) Hfsdpfx Asvvlmcsfcsf Spindle compensation Accuracy package Control: Röders RMS6 in current version A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: good (used), Year of construction: 1998, Hermle C 600 U CNC Machining Center Manufacturer: Hermle Model: C 600 U Year of manufacture: 1998 Operating voltage: 400 V / 3~ Frequency: 50 Hz Control voltage: 24 V Total rated current: 31 A Control system: Heidenhain TNC 426 Machine weight: 6,400 kg X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Hfodpoyrr Ucefx Afcof Tool magazine: 30 positions Tool holder, type: SK-40 Accessories: included, as per photos (vice + probe) No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 10,311 h, Main Drive Spindle speed range 10 to 12000 Spindle motor power 13 kW Number of axis 3 Movement X-Axis Movement 760 mm Y-Axis Movement 510 mm Z-Axis Movement 610 mm Table Table load 1000 kg Tools Max weight 7 kg Max tool diameter 80 mm Max tool length 300 mm Media Chip conveyor Yes Additional Equipment Hsdpex D I Tqsfx Afcoff Cooling Water System Main Cooling Chip Protection Cabin/Cover Machine Lamp Machine Base Machine Status Indicator Lamp This Hurco VMX 30i was manufactured in 2016. It features a robust table size of 1020x510 mm with a maximum load capacity of 1000 kg. Equipped with a high-speed range up to 12000 rpm and a rapid traverse rate of 35/35/30 m/min in X/Y/Z, it ensures efficient machining. Additional features include a cooling water system, chip conveyor, and protective cabin. Consider the opportunity to buy this Hurco VMX 30i vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2003, turning diameter 190 mm turning length 620 mm control Fanuc Series 18i-TB total power requirement 15 kW Hedpfxoxiy Aue Afcsff weight of the machine ca. 13,5 t dimensions of the machine ca. 5350X3350x2395 m

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, 3 axis CNC Machining Centre HURCO type VM10-24i PLUS CTS Year of construction: July 2024 - AS NEW - less than 100 working hours Travel X: 660 mm Travel Y: 406 mm Travel Z: 508 mm Hsdpfoyh Nz Ajx Afcsff Numerical Command WinMax 5: double touch screen 19'' / Detachable electronic crank / USB ports Spindle: SA40, cooling by thermal fluid Spindle speed: 12 000 RPM Integrated tool coolant (CTS) Table size: 762 x 406 mm - 3 T-slots 18H7 - Loading capacity: 1500 kg Tool changer: 24 positions, automatic electric arm changer Spindle motor: 11,2 kW at 1450 RPM Max couple: 73,6 Nm Rapid advances: 28 m/min. on X, Y and Z Standard Functions: Ultimotion / rigid threading / helical interpolation / trochoidal machining / import STL /WinMax programmation Fanuc ISO + conversational Installed software options: Ultimonitor ESF (supervison Ethernet) Materials and tools Bookcase Files player DXF 2D/3D, SPLINE and STEP

Condition: used, Year of construction: 2008, turning diameter 1000 mm swing diameter 1250 mm turning height 500 mm control Siemens Sinumerik 840 D Workpiece spindle flange diameter 520 mm work piece spindle speed range 0-440 U/min total power requirement 75 kW Hedpfew Rgcfsx Afcjff weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm With grinding spindle Table travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mm Table speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axis Equipment/accessories: - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentation