Tractor

Massey Ferguson MF 8S.245 Dyna-VT

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Rsdpsvwlqqofx Abdsn Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2019, operating hours: 3,868 h, front tire size: 540/65R24, rear tire size: 600/65R38, AUTOPOWR / IVT - 40 KM/H / AUTOTRAC READY / GEN 4 COMMAND CENTER / AUTOTRAC / JDLINK-CAPABLE / PREMIUM SEAT / HYDRAULIC PUMP - 114 L/MIN / 3 ELECTRONIC SCV 450SER CONTROL UNITS / MFWD FA- TLS WITHOUT BRAKES / 2-POSIT. STEEL RIMS FRONT / FRONT Rodpfx Aoulaxhjbdsn

Condition: used, Year of construction: 2019, Equipment: compressed air brake, Heatable front and rear windshield Additional device holder / Rodpsr Ilxvjfx Abdjn

Year of construction: 2006, condition: like new (used), Pneumatic crushing and sizing machine for band saw blades. Rodpody A A Nofx Abdjn

Condition: used, Year of construction: 2023, operating hours: 185 h, maximum speed: 50 km/h, front tire size: 540/65 R28 | 0%, rear tire size: 650/65 R38 | 0%, tire size: 650/65 R38, number of beds: 35, Tyres (front): 540/65 R28, Tyres (rear): 650/65 R38, Operating hours: 185, First registration: 19.12.2024 Basic equipment/Technical data ENGINE Max. power: 121/165 kW/hp (ISO 14396) Max. power with power management: 136/185 kW/hp Max. torque: 790 Nm, with power management: 800 Nm Registered power: 134 kW (ISO 14396) Max. PTO power: 103/140 kW/hp (OECD) 4 cylinders, 4.9l AGCO Power - 49 LFNT-D5 Exhaust aftertreatment with DOC - diesel oxidation catalyst, SCR 3rd generation & diesel particulate filter Emission standard: Stage 5 Electronic engine control with Vistronic fan management Engine speed memory Powercore engine air filter with coarse dirt extraction Rjdjw A Hgpopfx Abden EasyCare radiator package 280 liter fuel tank

Condition: ready for operation (used), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for economical volume reduction of recyclable residues in industrial and craft sectors: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials Horizontal baler, DIXI 60 SLD waste press with tipping device Technical specifications: Pressing force: 60 tons Specific pressure: 6.81 kg/cm² Power supply: 400V / 7.5kW Bale dimensions: 800 x 1100 x 1200 mm Number of ties: 3 Bale weight: approx. 370–410 kg Tying: manual Feed opening: 990 x 1110 mm Machine weight: 5,420 kg Average pressing cycle: 47 sec Year of manufacture: 2011–2016 Dixi 80SLD Baler Technical Data of the Baler Brand: Dixi Model: 80 SLD Pressing force: 80 tons Rsdpsra A E Uefx Abdsn Drive power: 11 kW, 400 V / 32 A Feed opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 sec Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: Length: 4,200 mm (+cage 1,600 mm) Width: 1,830 mm Height: 2,620 mm Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016–2020 Weight: approx. 8.4 tons Condition: Used

Condition: new, power: 18 kW (24.47 HP), gearing type: mechanical, fuel type: diesel, color: blue, overall weight: 2,000 kg, total length: 2,895 mm, empty load weight: 1,210 kg, maximum load weight: 790 kg, suspension: other, number of seats: 1, Equipment: all wheel drive, Power steering, diesel, all-wheel drive, 18.2 kW, 1,319 cm³, 1 seat, easy-shift transmission, 9 forward gears + 9 reverse gears, shuttle gearbox, side-mounted gearshift, analog fuel gauge, rear swivel work lights, roll bar, 2 front weights at 15 kg each, 3 cylinders, power steering, total length 2,895 mm, weight 1,210 kg, bias-ply tires front: 6.0-12, rear: 8.30-20, permitted total weight 2,000 kg. FOR US, CONDITION AND GUT FEELING ARE MOST IMPORTANT; PRICE COMES SECOND. If you have any further questions, Mr. Faller will be happy to assist you at the given number. //* TRADE-IN, PART-EXCHANGE, OR FINANCING OF YOUR VEHICLE POSSIBLE! All information is provided without guarantee. For more offers, visit our homepage. The description and specified data do not constitute a guarantee and are not binding. The only binding agreement is the sales contract concluded at the dealership upon purchase of the vehicle. Subject to errors and prior sale! Rodpswtpvuofx Abdon

Condition: new, Year of construction: 2024, Price 99000¤ + VAT HMK 102 B Alpha Stage 5, turbo diesel engine 99.8 HP (74.4 kW, 4.4 liters, 4 cylinders Perkins, Road registration possible Luxury glass cabin "Jumbo" of the latest generation, FOPS/ROPS certified with 2 doors Air conditioning and heating CD-MP3 audio device with antenna and speakers Music player ? Bluetooth Street lighting ? 2 front, 2 rear, with flashing light Rodowgud Rjpfx Abdon Work lights ? 4 front, 4 rear, independently adjustable Beacon ==> LED reversing alarm Manual mode to activate the gearbox in the event of electronic system failure Tool box, work suit Documentation: user manual, spare parts catalog Servo-assisted, double pedal together or separately, including hydraulic accumulator for effortless braking in engine off Luxurious driver's seat with armrests, headrest, adjustable to the driver's position and weight and seat belt Tilt-mounted steering column TIPshift joystick for front loader 6 forward gears, 3 reverse gears, full automatic/Powershift Two adjustable and tilting panoramic mirrors Windscreen wipers front and rearAutomatic transmission 6 forward gears/3 reverse gears, full Powershift/Autoshift Heavy-duty axles 100% differential lock (rear axle) + limited-slip differential (front axle) Flow-sharing system (enables combined movements)Closed, load-dependent flow-sharing hydraulic system Integrated four-wheel drive (4x4)Front tire 20"Rear tire 16.9-28 12-plyTelescopic arm + Brake line BRAKE LINE VALVE/TELESCOPIC Brake line Double acting hydraulic line MSS (Motion Stabilization System)Auto-locking systemHydraulic joysticks Load control valve (REXROTH-LS (LOAD SENSING)) Variable displacement piston pump With pneumatically suspended seat Retro mechanical displacer Retro hydraulic displacer Price differenceFuel refill pump Selector lever excavator pattern ISO-SAE Rubber pads on stabilizers Safety valves for lifting armSafety valves for loading bucket inclination Safety valves for excavator arm and boom cylinders Overload warning system, EXC. OVERLOAD WARNING SYSTEM, LOADER AUTOMATIC IDLE/STOP Mechanical quick coupler - HMK factory Mechanical quick coupler Hybrid HMK - other brand Mechanical quick coupler Hybrid HMK-JCB Hydraulic quick coupler for 4:1 bucket Standard loader fixed bucket 1.1 m3, 2420 mm width Standard loader 4:1 bucket 1.1 m3, 2420 mm width Forklift forks on the bucket or quick coupler - tiltable Forklift forks on the bucket ==> 6:1 bucket is attached ==> here bucket is attached to forklift Forklift attachment for heavy loads Hydraulic quick coupler cable set (installation costs not included) ==> must be checked Excavator bucket 40cm with teeth and side cutters - HMK Factory Excavator bucket 0.18 m 3 60cm with teeth and side cutters - HMK make Excavator bucket 90cm with teeth and side cutters - HMK make Clearing bucket 150cm without teeth - HMK WestStift (2x pins per bucket) without road approval "Guarantee 1 year or 1,800 hours, whichever comes first, valid for EU area, or subject to confirmation depending on the country of use" CE certificate Subject to prior sale and errors. Images show original consumption data.

Condition: new, functionality: fully functional, fuel type: gasoline, Equipment: lighting, New complete Fendt Slicer 310 FKC front mower with conditioner ----- New complete Fendt Slicer 310 FKC front mower with conditioner Rjdpfx Ajv Ew Drjbdsn ----- Neuer kompletter Fendt Slicer 310 FKC Frontmäher mit Aufbereiter

Condition: used, Year of construction: 2020, operating hours: 3,300 h, power: 96 kW (130.52 HP), front tire size: 540/65R24, rear tire size: 600/65R38, Equipment: compressed air brake, front power take-off, GERMANY / AUTOPOWR / IVT - 50 KM/H / DUAL 10 "COMMAND CENTER DISPLAY / AUTOTRAC READY / JDLINK CAPABLE / 4600 PROCESSOR / MIRROR - WIDE ANGLE / PANORAMA WS / W/B-POST / PREMIUM RADIO / HYDRAULIC PUMP - 114 L/MIN / 1,2,3,&4ELEC. SCV 4 Redpfjuq Nv Hsx Abden