Swiss-type cnc lathe

MANURHIN KMX 920 CLEVER

Condition: like new (used), Year of construction: 2021, operating hours: 3,400 h, functionality: fully functional, machine/vehicle number: 40 6003, spindle motor power: 5,500 W, spindle speed (max.): 12,000 rpm, spindle bore: 20 mm, bar passage: 20 mm, Manurhin KMX 920 Clever – 9 axes Year: 2021 – Serial No. 40S003 Machine Specifications - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle power: 3.7/5.5 kW - C-axis indexing accuracy: 0.001° SUB-SPINDLE - Maximum bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle power: 3.7 / 5.5 kW - C-axis indexing accuracy: 0.001° - Number of turrets: 1 LOWER TURRET - Number of stations: 12 - X/Z travel: 90x65 mm - Y travel: 50 mm - Number of tool holders: 2 TOOL HOLDER 1 - Number of stations: 10 - Number of driven positions: 4 - X/Y travel: 90 / 319 mm END WORKING DEVICE - Number of stations: 12 - X/Z travel: 215x305 mm ELECTRICAL SUPPLY - Supply voltage: 400 V DIMENSIONS - Floor dimensions: 2000x1280 mm Kfedjxwp Txjpfx Aa Eea - Machine height: 1720 mm - Machine weight: 3600 kg MACHINE HOURS - Power-on hours: 32,700 h (increasing) - Machining hours: 3,370 h (increasing) Equipment - CNC: Fanuc 31i-B - Interface(s): Ethernet / RS232 / USB / PCMCIA - Chip conveyor - 3-color status light - Rotary cannon - Parts catcher - Parts ejector - Coolant tank ACCESSORIES INCLUDED IN THE SALE - Bar feeder: Iemca Elite 220 (2010) - Fire suppression system - 70 bar high pressure – Muller - Oil cooling unit DOCUMENTATION - Electrical diagram - Maintenance instructions - Operator’s manual Machine currently in use. Viewing under power possible. Available within 2 months. Machine to be collected on site; travel and transport costs borne by the buyer.

Condition: refurbished (used), Year of construction: 2024, operating hours: 4 h, functionality: fully functional, Equipment: documentation/manual, For sale is a fully renovated TORNOS DECO 20 type longitudinal lathe. The renovation was carried out by Tornos specialist service with factory parts and covers the following units: - painting of coverings - replacement of all ball screws - replacement of all linear guides - replacement of all cables and cable ladders in the machining area - replacement of the entire pneumatic system - replacement of the entire coolant system - replacement of all axis servomotors - renovation of all spindle motors - main and control spindle renovation - renewal of rotating guide bush and synchronous drive - refurbishment of Fanuc control and servo amplifiers - power elements, partial replacement of electrical components Description TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 220 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] (5,5kW) - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 25,4 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 1,5 [kW] (2,2 kW) - C axis indexing precision : 0.1 [°] CROSS SLIDE 1 - Number of positions : 5 CROSS SLIDE 1 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] - Live tools power: 1,5/2,2 kW BACKWORK UNIT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2270 x 1650 [mm] - Machine height : 2200 [mm] - Machine weight : 3500 [kg] Kfodpeuq A T Sefx Aa Esa EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 Horizontal (8000 1/min 1,5/2,2kW) - Rotating guide bush (syncronised) - Parts catcher - Ejection of workpiece - Coolant tank - Bar loader LNS ALPHA 320S OPTIONAL: Long piece ejector device (max. workpiece lenght 700mm) OIL MIST EXTRACTION – SEI EMC 1000 with stand or. ELBARON RON 100 D2TR The equipment has been almost completely renovated and is in perfect and new condition. It has a long piece ejector and a new LNS bar feeder, it can optionally be equipped with an oil mist separator and other accessories, which we can also provide. If you are interested, we will provide you with additional information and pictures. The longitudinal lathe can be viewed at our site in Hungary, even during operation, at a pre-arranged time.

Year of construction: 2001, condition: like new (used), CNC Vertical Center MIKRON HAAS VCE 500. Kjdoh D E Duspfx Aa Ejfa Control: HAAS Year: 2001

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder Kfsdpjtzyx Tofx Aa Esa - Pick-up spindle workpiece pusher

Condition: excellent (used), Year of construction: 2007, Machining center - vertical Manufacturer: Hyundai KIA Kjdpjiw Ekdjfx Aa Eofa Modell: VX380TD Year of c.: 2007 Control unit: Fanuc Series 01-MC Spindle speed range: 12000 rpm Power consumption: 7 kva Type of tool holder: BT30 Slots in storage: 20 X-Axis movement: 500 mm Y-Axis movement: 350 mm Z-Axis movement: 350 mm Weight: 5000 kg

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Kfedpjuuz Iiofx Aa Eoa Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: good (used), Year of construction: 2007, operating hours: 14,029 h, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 650 mm, turning diameter: 400 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, For sale is a Gildemeister NEF 400 CNC lathe. The machine is in good condition, ready for immediate use, and fully functional. Technical specifications: Year of manufacture: 2007 Control: Heidenhain CNC Pilot 4290 Operating hours: 14,029 h X-axis (transverse travel): approx. 220 mm Z-axis (longitudinal travel): approx. 700 mm Max. turning diameter: approx. 400 mm Max. swing diameter over bed: 400 mm Max. swing diameter over cross slide: 270 mm Max. turning length: 650 mm Spindle bore: 65 mm Speed range: 0 - 4,000 rpm Drive power (100% duty cycle / 40% duty cycle): 12/15 kW Max. torque: 400 Nm Number of tool positions: typically 8 Tool holder: VDI 30 Tailstock travel: 680 mm Tailstock mount: MT 4 Clamping pressure: approx. 6.8 kN (hydraulic) Space requirement (L x W x H): approx. 2.5 x 1.7 x 1.8 m Machine weight: approx. 2.8 t Chip conveyor included in the offer Accessories such as tool holders are not included in the offer Can be offered separately Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Kfodpfx Aaswig R Ij Eoa Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website

Year of construction: 1971, condition: ready for operation (used), machine/vehicle number: 713406, -KOM 105- Kedpsg Nt A Eofx Aa Esfa Offered here is a grinding machine from the company Kehren & Co with a filter system from the company FAUDI. This is a segment grinding machine with vertical grinding spindle. The machine has 2 grinding tables/magnetic plates for pendulum machining. Technical data: Grinding machine: Manufacturer: Kehren & Co Type: D7B Year of manufacture: 1971 Make No: 713406 2 grinding tables/ magnetic plates with 700mm diameter. Grinding method: segment grinding Control: Marposs weight: 6.600kg Filter system: Manufacturer: Faudi - Filtersystems Type: AFB 1,3 / 1001 Year of manufacture: 1992

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 310 [mm] - Spindle speeds : 280 - 7.000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,01 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Z stroke : 150 [mm] - Spindle speeds : 280 - 7.000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0,01 [°] - Number of turrets : 1 UPPER TURRET - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 5.700 [rpm] - Live tools power : 2,8 [kW] GUIDE BUSH HOLDER 1 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 6.000 [rpm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 8 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.645 x 1.403 [mm] - Machine height : 1.680 [mm] - Machine weight : 3.880 [kg] Ksdpfsuha Elex Aa Eefa EQUIPMENT - CNC : Fanuc 16 iTB - 3 colors status lamp - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank - Bar loader : IEMCA BOSS 432/32LL - Electric transformer

Condition: good (used), Manufacturer ESTARTA Model 301 MV Condition Used Stock number 4576 Location Badajoz, Spain Dimensions 1520x1020x1260mm Weight 1550 kg Opening between grinding wheels 1,5/50mm Max. grinding wheel width in plunge grinding plunge 125mm Dimensions of the working wheel (od x Kfedjr Ezfpepfx Aa Esa id x width) 300x125x175mm Øext.min. working wheel working wheel 220mm Max. depth of profile of working profile depth 8mm Dimensions of the driving wheel (od x id x width) 220x125x125mm Øext.min. of driving wheel drive wheel 165mm Max. depth of profile of the driving wheel profile depth 8mm Grinding wheel motor power motor power 7,5Kw Motor power of grinding wheel driving motor power 0.75Kw Tilting angle angle of working working +/- 5º