Used Proton Me-Line for sale (14,733)

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. Credpfokw Ukusx Afwjc •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: new, Year of construction: 2026, functionality: fully functional, pressure: 8 bar, compressed air connection: 8 bar, warranty duration: 24 months, Equipment: cabin, compressor, crane, documentation/manual, lighting, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 8-10 weeks after receipt of payment! ✅Important note: If you would like to receive a quote for a blast cabinet, please use the blast cabinet configurator on the homepage of our website. ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ 💥 SR-LINE – Industrial blasting rooms for XXL applications 💥 🔧 Maximum performance, robust construction, sophisticated design! Whether railway wagons, construction machinery, aircraft, or military vehicles – with our SR-LINE blasting rooms, you can process even the largest and most complex workpieces reliably and efficiently! Our blasting rooms offer a safe, clean, and high-performance environment for every type of surface preparation – be it cleaning, roughening, or smoothing. _____ 🧩 Complete system with all essential components: ✅ Spacious main cabin with rubber lining to protect against wear ✅ Emergency exit doors with safety windows ✅ High-performance sandblasting pots in various sizes ✅ Pneumatic or mechanical abrasive recovery system ✅ Efficient dust collection system to maintain air quality ✅ Aftercooler, filter units, and robust steel construction ✅ Main control panel for centralized control ✅ Lighting system for perfect visibility in the room ✅ Optional: Overhead cranes, workpiece trolleys, wall-mounted multi-axis units for improved handling _____ ♻️ Economical & sustainable thanks to recovery system The used blasting abrasive is collected automatically or manually and returned to the cycle – saving resources made easy! _____ 🔒 Safety & comfort according to EU standards Our systems comply with applicable CE and safety standards and are equipped with optional sound insulation for a more pleasant working environment. 💨 Fresh air systems with fans or suction lines ensure optimal air supply during the blasting process. _____ 📦 What does the SR-LINE blasting system include? • Blasting cabinet • Workpiece entry door & operator door with panel • Interior lighting & rubber lining • Blasting pot & abrasive container • Recirculation system with scraper blades • Dust filter & aftercooler • Hoses, lines & main control panel • Robust support structure ⚠️ Compressor and compressed air tank must be purchased separately. A suitable air duct is recommended. _____ 🚀 Why SR-LINE? ✔️ Customized planning for your application ✔️ Extremely durable materials & components ✔️ Designed for high performance and continuous operation ✔️ Made by PROTON Maschinenbau GmbH – 40 years of experience _____ 📞 Contact us now for a customized quote – we'll be happy to advise you! 🛠️ SR-LINE – Your solution for large-format blasting technology. Codpeghawmjfx Afwerc ☀️ 2-YEAR WARRANTY ☀️ ☀️ We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, PROTON P-V LINE  PROTON equipment offers the right solution to recovering and conveying of blast medias, powders, plastic pellets, grains, sands, aggregates and other bulk metarials in both cleanup and material transfer functions. The main type of industry using our equipments are blast cleaning companies, shipyards, tank cleaning companies, metallurgical plants and steel mills, foundries, power plants, cement industries, chemical industries etc..   The dust in the air is collected by a Vacuum Cleaner and the grit in the Stock Silo by its separator. Especially in inaccessable or enclosed areas such as storage tanks, box girder constructions, tank internals at shipyards etc., the equipment offers great savings in time and manpower.  A PROTON Vacuum system cuts costs by reducing cleanup time and reclaiming valuable materials.  This versatile vacuum system can be used to pick up any material that will flow through a hose.  With its long reach and powerful suction, PROTON cleans out tanks, pipes. There are 2 types of stock silos, Cylindrical and Square, having 2 floors. Technical Specifications for standard machines: VC Unit’s cost-cutting power has been proven hundreds of times. In fact, most VC units pay for themselves in less than 3 months through reduced labour costs and reclaimed materials. Units are available with capacities up to twelve tons per hour, conveying distances up to 330’’(100m),and motors with 7,5 kW-90 kW (3,98m³/min-72m³/min). Performance data for air (p₁=1,0 bar, t₁=20 °C, ρ=1,2 kg/m³) The heart of the PROTON VC is a very robust AERZEN blower made in GERMANY. All sets include the following equipment: - Suction Hose (rubber-wired) - Suction Hose for connection between Vacuum Unit and Hopper Crjdpfxoghbkyo Afwsc - Suction Nozzle - Cam-lock and clamp Connections - Cartridge Filter (spare) - Oil for Blower (spare) - Manometer (spare) - Phase Protection Relay - all necessary fasteners

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 42 ratings ✈️shipping : 45-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! Cedpjc Uthdofx Afwjrc ⭐€10,850 EXCL.VAT & SHIPPING⭐ ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Paint Booth – WETLINE-SP-1500 ✔️ Internal dimensions: 1390 mm L * 1500 mm W * 1400 mm H ✔️Pool height : 561 [mm] ✔️Filter system : double layer water curtain ✔️Filtering material : city water, plate filter and mechanical separator with backwash ✔️Filter material cleaning : thin and thick grid ✔️ Pump output : 1.5 [kw/h] 940 [d/d] x 1 piece ✔️Number of fans : 1 piece ✔️Fan performance : 5,400 m3/h x 1 ✔️Fan motor power : 3 kw/h ⭐The cabins can be made of galvanized sheet metal or stainless steel. They can be designed to be integrated into the automatic and manual systems. ⭐At the pool there is a platform for material and personal safety. The platform covers the entire pool. ⭐In the Filterline wet painting booth, environmental pollution is prevented by the simultaneous use of 3 different filter systems. ⭐Wet paint particles, sucked in the air by a suction fan, are caught by the water curtain at the back of the cabin and transported into the pool. ⭐Wet paint particles in the trace amount that are not caught by the water curtain are caught by the separators on the suction ducts on the back of the water curtain, and the fresh air outlet is from the flue. ⭐The backwash system is applied in the separator section to help the process of retaining the wet paint particles of the separators. The filtration efficiency, whose contact area is increased by spraying wash water through the nozzles, is maximized. ⭐While paint dirty water accumulated in the basin enters the pump suction chamber, it goes through a coarse and a fine mesh to prevent clogging of the pump spray water, thus ensuring paint particles are retained. ⭐When the dirty water in the pool becomes unusable, it can be disposed of from the waste water valve located behind the grates in the suction department. ⭐By using a paint separator system, the water in the pool is cleaned from the paint and used continuously. ⭐The separated paint residues are drained by a filter press and must be disposed of properly. ⭐Price quoted is for the smallest standard size in stainless steel. All devices/machines are new, not used. Do you want a special configuration ❗ Call us now❗ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, These units are manufactured from galvanized sheet and are designed to be fully screwed. This takes up very little space during shipment. Cjdpfxody Dv Do Afwerc Suction system is designed separately and specially for each booth so that the booth provides perfect suction. Thanks to the suction system, it is not possible for the personnel applying wet paint to be disturbed by the paint. In Elboy Wetline-KF Wet Paint Application Booths, environmental pollution is prevented by using accordion and cartridge or roll glass fiber filtration system. Wet paint particles vacuumed through suction fan in the air are caught by the accordion filter on the back of the booth. Wet paint particles in the trace amount which are not caught by the accordion filter are caught by the fiber filter on the back side. The door system can be fitted to the front door entrance in various ways. UV lights can be placed in the cabinet to check the painting process.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! Codpfjggyk Ejx Afwsrc ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! Important note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ✅Twinline-MA Automatic Powder Coating Booth - Perfect Coating, Fast Color Change✅ The Twinline-MA powder coating booth from Proton Maschinenbau was developed for automatic and manual application in an electrostatic field and impresses with its efficiency, user-friendliness, and outstanding coating results. ✅Innovative design for quick cleaning: Thanks to the insulating PVC floor and the automatic floor cleaning system, dust accumulation is effectively prevented. The booth can be cleaned quickly and easily without entering – for maximum productivity with minimal effort. ✅Intelligent airflow for maximum efficiency: Fulair technology ensures targeted air extraction at the inlets and outlets. This prevents powder loss into the environment and guarantees ideal conditions in both manual and automatic coating areas. ✅Effective powder recovery: The monocyclone with a downstream filter system enables a high powder recovery rate. The filters are automatically cleaned using compressed air, significantly reducing maintenance requirements. ✅Robust and flexible construction: The booth construction is available in powder-coated steel, stainless steel, or entirely made of PVC. The solid construction with no moving parts ensures a long service life and low maintenance costs. ✅Fast integration, short installation time: Twinline-MA can be easily integrated into existing systems and minimizes downtime. All system components are optimally arranged and offer the operator easy access at all times – whether during operation, color changes, or maintenance work. With the Twinline-MA booth, you are investing in speed, quality, and reliability. Experience a modern powder coating system that sets standards! Inquire now – Make your company fit for the future! ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 12 Ratings ✈️ Shipping : 3-4 weeks ✈️ ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✅✅✅Energy class A+++✅✅✅ ⭐Offer Price €6,220 EXCL. VAT & SHIPPING ⭐ ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time 3-4 weeks❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ✨ Strong ✨ Economical ✨ Efficient ❗❗❗The fastest delivery time! Go direct from the manufacturer❗❗❗ ►►►PROTON - WETLINE EX paint booth - VENTILATION CHAMBERS◄◄◄ Crjdpfx Aoc Uthxsfwec ⭐WETLINE-EX-800-PRO⭐ ✔️ MOTOR POWER : 0.55 KW/H ✔️ FAN PERFORMANCE : 8000 M3/H ✔️ CARTON FILTER AREA : 2.6 m2 ✔️ FIBERGLASS FILTER AREA : 1.44 m2 ✔️ PANEL FILTER NUMBER G3: 2 PCS ✔️ PANEL FILTER AREA : 1.7 m2 ✔️ PRESSURE GAUGE : YES ✔️ MOTOR CONNECTION : BELT CONNECTION ✳️CABIN SOLUTION FOR LOW COST✳️ Exhaust/supply pods are ideal for converting an area in your factory for spray painting. They can also be used to create a prep area for sanding or cleaning parts prior to finishing. We have designed a variety of exhaust/supply chambers to meet your finish requirements while minimizing your footprint. Our exhaust/supply chambers share the same design features as our large industrial booths. ✳️ECO-FRIENDLY✳️ Each supply chamber meets safety and code requirements - NFPA-33, IFC to protect those working in an industrial spray environment and the environment outside. Their extraction/supply chamber is designed to efficiently remove overspray from the painting process while maintaining an even flow of air throughout the work area. ✳️FLEXIBLE AND ADAPTABLE ✳️ You will find that our chambers can be designed for both types of care. Supply Chambers are supplied with exhaust fan and motor as a package, with Supply Chambers specifically designed to accommodate an Air Supply Unit ✳️CNC AND CAD TECHNOLOGY✳️ Panels are made from Premium 1.5 - 2.0mm. Galvanized G-90 steel and precision stamped on m5 centers allowing for easy installation of nuts and bolts and it has reinforced construction to support the fan placed on top. ✳️QUIET EXHAUST FANS✳️ Typically operates at low dBa noise levels below OSHA limits ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! Important note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. Crodjkwct Uopfx Afwec ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ► Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Before the paint can develop its full potential, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – be it oil, dirt, or oxide – is reliably removed. This is the only way to achieve lasting corrosion resistance and excellent paint adhesion. Each product requires a customized process. Whether alkaline or acid degreasing, iron or zinc phosphating, nanotechnology, or chrome-free processes – we develop customized solutions for your requirements. Our pretreatment systems – whether spray or immersion systems – offer you: ✳️ Maximum energy efficiency ✳️ Minimized chemical and water consumption ✳️ Precise process control with automatic dosing and pH monitoring ✳️ Durable construction made of chemical-resistant stainless steel or plastic Our promise: Customized technology for the highest demands Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We consider all crucial parameters – from heating power and water circulation to vapor deposition and chemical separation. The spray wash lines are seamlessly integrated into your conveyor system. All cleaning, rinsing, and drying processes are fully automated and efficient – ready for a perfect coating. Available systems: ✳️ Spray and dip pretreatment lines ✳️ Nanotechnology systems (e.g., Bonderite, Oxsilan) ✳️ Degreasing and pickling systems ✳️ Iron and zinc phosphating lines ✳️ Chromating and chrome-free systems PROTON – Technology that convinces. Experience that works. ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, Product description: Codpfx Asgha A Sefwerc Casting, forging, pressing, heat treatment, finished product, semi-finished product, steel fabrication etc. It is preferred for surface cleaning, pre-coating preparation or revision works. Its distinct advantages are that it enables versatile sandblasting, and that large and small parts with irregular geometry can be sandblasted. With the help of the digital clock we use in our machines, the sandblasting time can be adjusted according to the part type and desired sandblasting surface. Casting sandblasting, forging sandblasting, press - heat treatment workpieces sandblasting, finished product sandblasting, semi-finished sandblasting, steel fabrication sandblasting, etc. used in transactions. The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. It can be designed as a continuous system upon request and can be included in the paint line.

Condition: new, Automatic sheet metal & profile shot blasting machine It is preferred for surface cleaning works of products such as sheet metal, NPI, NPU, angle, profile etc. The parts to be sandblasted move with the help of roller conveyors located at the entrance and exit of the machine. Turbines are placed in the machine body at appropriate angles so that the part surface can be sandblasted from the bottom and top. Its distinct advantages are that the products can be sandblasted quickly in length, semi-finished and finished products that can move on the roller conveyor, and the conveyor system. The digital speed control we use in our machines can be adjusted for each loading according to the piece type and the desired sandblasting surface. The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. Conveyor lengths can be lengthened or shortened upon request. Cedpsghaywefx Afwjrc

Condition: new, TECHNICIAL SPECIFICATIONS: It can be manufactured from 304ss or 316ss Stainless material in accordance with the preferred surface treatment. The tank side walls are insulated with 50mm glass wool. The tanks that require heating can be produced with serpentine or electric heating. Temperature control is done digitally and follow-up is provided. If necessary, an air mixing device is added to the tanks. In the tanks, stainless ball type valves are used for discharge. WORKING PRINCIPLE: It is based on the principle of surface cleaning and processing by taking the material to be surface cleaned into the baskets as a general application and immersing it in tanks with chemical and / or water by means of a crane and waiting for a while. The aim is to clean the existing oil layer on the metal surface and create a thin film on the metal surface, thereby making the material more conducive to paint and more resistant to external factors. Csdpfx Ajfw N Rtsfwjrc APPLICATION AREAS AND ADVANTAGES: Automotive sector, White goods sector, Lighting sector and General machinery manufacturing sector are facilities that do not require continuous production or provide high and equal quality with less labor in facilities where alternative solutions are not available due to the shape and size of the material or very high capacities are not reached. Chemical values ​​and temperature values ​​can be monitored and controlled by applying automation optionally. APPLICATION: Immersion type surface cleaning applications vary according to preference and required strengths for each sector. As two main applications show: - iron phosphate surface treatment - zinc phosphate surface treatment Apart from these, only applications for cleaning and oil removal can be made. There is an option additional to the immersion tank: * a drying oven * 2 stainless steel baskets DRYING OVEN: Generally, the working principle of drying ovens, which is the last step of immersion type surface cleaning units, is like BOX type ovens, however, in order to be suitable for immersion type surface cleaning facility, the parts of the lid are designed on the top side of the oven and the surface cleaning parts are dried in the same basket. In this type of drying system, the parts enter the drying oven and are ready for paint application after drying.

Condition: new, total height: 3,500 mm, total length: 7,000 mm, total width: 4,000 mm, volume flow: 26,000 m³/h, warranty duration: 12 months, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, working height: 2,700 mm, Equipment: cabin, documentation/manual, ⭐⭐⭐⭐⭐ (5.0) Customer Rating – Quality that impresses! ⚡ Top Service – Fast Delivery – Reliable Support ⚡ ✈️ Plus shipping costs – Shipping available upon request ⏰ 48H EXPRESS DELIVERY available after a deposit! Regular delivery time varies between 1 business day and approximately 15 weeks depending on stock. 🔧 Please note: Additional options may extend delivery time. 📩 Ask the seller in advance whether your selected options are immediately available. 🛒 ►►► Buy now! ◄◄◄ 💸 Preserve liquidity – invest wisely! ✳️ We offer flexible financing options: ✔️ Hire Purchase ✔️ Leasing ✔️ Warranty Programs 📞 Contact us – we'll find the right solution for your budget! ✨ Powerful. Economical. Efficient. ✨ 📦 Immediately available in three standard sizes! 📌 Our three standard booth sizes are usually in stock and available for short-term delivery. 📌 If larger painting areas are required, we can combine standard booths modularly to create customized solutions – tailored to your space and process requirements! 🎨 PROTON WETLINE KKF-40-70-35 Top-of-the-line wet paint booth & drying system 📐 Technical specifications (inside / outside): Codpfeipvuljx Afworc Length: 6900 mm / 7000 mm Width: 3900 mm / 4000 mm Height: 2700 mm / 3500 mm Air treatment box: 1350 x 2900 mm 🔧 Features: 🌬️ Vertical airflow via full-surface ceiling supply air plenum – for even, dust-free painting 🚪 3-wing main door with viewing windows + service door with emergency locking in case of overpressure 💡 Shadow-free lighting, heat-resistant and compliant with standards ♻️ Recirculation system with controllable fresh air flap – rapid heating to 60–80°C 8–15 min 🔇 Low-noise, high-performance fans with constant airflow (0.30 m/s) 🛡️ Slight overpressure reliably protects against dust ingress 🔥 Heating system & efficiency: Riello G20 burner Heating output: approx. 200,000 kcal/h Efficiency: up to 99% High-temperature heat exchanger made of special steel 🧼 Top-of-the-line filter technology: ✅ Pre-filter (tear-resistant, up to 100°C, DIN 53438-3 F1) ✅ Ceiling filter (EN 779: F5, polyester-coated) ✅ Floor filter (Paint Stop, G3, silicone-free) ✅ Activated carbon filter (DIN 24184, class G4) 🖥️ Intelligent control: Modern control panel for full control of ventilation, heating, lighting, and Safety – simple & compliant with standards 🖲️ Optionally available with touchscreen operation 🧱 Flexibly positioned air treatment units – can be mounted on the right, left, or rear of the cabin ➕ Optional equipment (for an additional charge): 🪟 Panoramic doors – fully glazed 🧱 Roof with additional insulation 🎨 Paint mixing station can be integrated 🌈 Color selection: Any RAL color possible (standard: blue, white, orange, red, gray) 💡 Explosion-proof lighting (Exproof) 🌪️ Explosion-proof fan (Exproof Fan) 🖥️ Touchscreen control ⚠️ Selecting optional equipment may extend delivery times. Please discuss your options with our sales team in advance. 🚧 Installation costs not included in the price. 📍 These depend on your location – we would be happy to provide you with a customized quote! ☀️ 2-YEAR WARRANTY – Better safe than sorry! ☀️ ⭐ Follow us for new offers & promotions! ⭐ PROTON Maschinenbau GmbH – Your partner for professional painting technology with over 40 years of experience.

Condition: new, Product description: ROOMLINE powder coating booths are designed for paint recycling and prevention of environmental pollution during the powder coating process of large parts. It works on the principle of manual painting of products suspended on a rail or placed on a trolley.It is integrated into manual painting systems. Suitable for bar transfer systems. There are options to bring the products into the cabin with the trolley hanging above or on a bottom trolley. The cabin floor is left as the factory floor according to the demand, or the cabin is placed on a chassis and floor suction is provided. Available in floor, side wall or rear wall suction versions.The front of the cabin is optionally produced with a door or open. Depending on occupational safety and European standards, it can be equipped with equipment such as emergency exit door, fire extinguishing system, camera monitoring, ex-proof lighting and suction system, inverter motors. Cabinet construction consists of sandwich panels and steel structures in various thicknesses according to the project. Attachable Dust Collection Systems: Crodpfxoggyige Afwoc - Jet-Pulse Filter System - Mono Cyclone - Multi Cyclone Advantages: - Easy to Use - Quick Color Change - Easy assembly and disassembly - Cleaner environment

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. Credpfx Afeq Nxrxowjc 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: new, Allen Bradley 2706-B22J31 DL20 2-line Message Display , 31k Memory, unused in opened original box, 100% functional Codpfx Afsi D Tzhowjrc

Condition: good (used), For sale: Baking trays with gutters brand: SASA number of pieces in total: 550 baking trays total price: €25,000 dimensions: Length: 200 cm width: 80 cm height: 5 cm gutter width: 9.5 cm number of gutters per plate: 21 gutters The baking trays come from a current Mecatherm Line See also the photos All as good as new and still provided with a Teflon layer and all the plate are stainless steel. Viewing is possible on location If you have any questions, we'd love to hear from you! Kind regards, Leo Holland Crjdpfx Afort Uw Rewec for sale: baking trays with gutters brand: SASA total number of pieces: 550 baking trays total price: 25,000,- dimensions: Length: 200 cm width: 80 cm height: 5 cm width gutter: 9.5 cm number of gutters per plate: 21 gutters See also the photos All as good as new and still provided with Teflon layer and all plates are made of stainless steel The baking trays come from a current Mecatherm Line Viewing is possible on location If you have any questions, we would like to hear from you! kind regards, Leo Holland

Condition: used, mileage: 32 km, power: 96 kW (130.52 HP), first registration: 01/2026, fuel type: diesel, overall weight: 2,940 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,531 mm, total width: 2,474 mm, total height: 2,499 mm, loading space length: 2,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 88207 Errors and prior sale excepted! ---- SPECIAL EQUIPMENT * Airbag (passenger side) * Exterior mirrors, electrically adjustable, heated and foldable - with integrated turn signals * Radio: Ford audio system with 4-inch multifunction display - Connected Radio - DAB/DAB+ - FordPass Connect - 4 speakers, antenna - Integrated control panel and steering wheel audio remote control - Bluetooth, USB port, and hands-free system - Emergency call assistant Crsdpox I T Rxofx Afwoc * Seat Package 15: Driver’s seat, 4-way adjustable - Double passenger seat with storage compartment under individually folding seat cushions - Height-adjustable headrests - Fold-out table integrated into double passenger seat - Heated seats for driver and passenger - Inner armrest for driver - Manual lumbar support (driver's seat) - Seat cover: fabric * Technology Package 10: Heated windscreen - Rain sensor wipers - Front and rear parking pilot system - Active emergency braking assistant (camera-based) - Lane keeping assist with fatigue warning and high-beam assistant, additionally with lane keeping system - Headlight assistant with day/night sensor - Cruise control - Rear view camera with image display on multifunction display - LED downlight - Fog lights * Würth conversion: steel module block - vehicle floor panel - side wall lining ADDITIONAL EQUIPMENT * 1 battery * Driver’s airbag * Anti-lock braking system with electronic brake force distribution incl. ESP with traction control - Hill start assist - Crosswind assist - Emergency braking assistant - Rollover protection - Emergency brake support incl. emergency brake light * Battery: battery runtime, programmable for 10 min * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECO mode * Rear double-wing doors with 180° opening angle (without window) * Front power windows with quick down/up function for driver's side * Ford Easy Fuel * High-capacity alternator * Lockable glove compartment * Interior lighting with delay function and front reading lights * Front air conditioning incl. dust and pollen filter * 70 l fuel tank * Cargo area lighting * Steering wheel: synthetic leather steering wheel * Steering column adjustable for height and reach * MyKey key system * Emergency call assistant * Particulate filter: diesel particulate filter * Wheels: wheel trims * Wheels: tire repair kit * Wheels: steel rims 6.5 J x 15 * Headlights: halogen dipped headlights with daytime running lights * Sliding door entry light, automatic when door is opened * Sliding door, right * Rear mud flaps * Side protection strips * Power steering * Seat belts - Pre-tensioners and force limiters for front seat belts * Start-stop system * Rear bumper with integrated step * Partition wall (plastic) at B-pillar height * Air recirculation function * Lashing eyes * Immobilizer * Heat-insulating, lightly tinted windows * Central locking with remote control * Second remote control key * Overhead storage compartment at the front ... and much more.----1st owner. German specification. Errors and prior sale excepted. 2 years factory warranty from initial registration (extendable on request). We are happy to accept your vehicle in trade-in. Financing/leasing available with zero down payment! Do you have any questions? We are happy to advise you! Despite existing checks, a deviation of the vehicle from the above

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2026, Optical precision drill grinding High-precision and very easy-drill grinding with optics and , Costsaver and Swiss in 100% quality. grind drills, thinning and check in the shortest time and with maximum precision. With MEGA POINT blue line you win more than once, achieve with it: - Better positioning - Improved accuracy of diameter - Significantly longer service life - Feed force is greatly reduced The MEGA POINT blue line is a versatile precision drill grinding machine, which is easy and ergonomic operation and a variety of drills handelsueblichen nachschleift perfect and optimized. MEGA POINT blue-line 1-20mm (Optiom to 30mm) Technical specifications: Our MEGA POINT drill grinding allows precise and rapid regrinding and thinning all handelsueblichen drills. Our customers have so always perfectly ground drills for disposal. The sophisticated design provides enormous flexibility in terms of the different cut angles and the thinning of the drill. Without a doubt, the world's best conventional drill grinding! Crjdpfj R R R Sjx Afwoc Technical specifications Drill material grinding HSS and carbide HSCO Point angle adjustable 80 ° - 150 ° optional tip angle adjustable up to 180 ° Chuck with collets for drill diameters from 1 to 6.5 mm Chuck with collets for drill diameter 7 - 20 mm optional Spannzangenset for drill diameter 20 - 30 mm Average / free angle adjustable 0 - 40 ° Ausspitzvorrichtung, Ausspitztiefe adjustable CBN grinding wheel double-fine / coarse D 125 mm optional DIAMOND grinding wheel (for carbide drills) D 125 mm CBN grinding wheel for thinning D 50 mm x 4 mm Engine power 0.3 kW Spindle speed 2800 r / min Power supply 230 volt 50 Hz Dimensions (L x W x H) 50 x 50 x 50 cm Weight about 42 kg Standardausfuehrung For right- and left-cutting, two- and dreilippige drills. With built-in optics (10x Zoom) separate Ausspitzvorrichtung and: 1 Machine light 2 chucks with collets D 1 -6.5 mm and D 7 - 20 mm 1 CBNDoppel grinding wheel D 125 mm fine / coarse 1 CBNSchleifscheibe D 50 x 4 mm 1 Set of service tools 1 instruction manual with spare parts list 1 CD-ROM with manual (CE Declaration) Danger: OPTIMA / TATAR Parts BERGER technology will take over on January 1, 2016, the stock of spare parts of HighTech OPTIMA AG. We can now offer genuine spare parts and service for the OPTIMA and TARTAR Boherschleifmaschinen.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, Standard equipment red line Optical precisions drill point grinding machine for 2 fluted drills regrinding and point splitting in one chucking diameter range 2 to 16 mm (1 to 20 mm as option) point angle 80° - 150° infinitely adjustable cutting angle 0° - 20° infinitely adjustable relief angle set to 30° incl. complete electrical instalation with single phase electrical motor 0,3KW 115V 60Hz (or 220V 50Hz) Cedsbrpr Uepfx Afworc and integrated power-supply for illumination of the optical system incl. built-in optical projection system with 10 power lens (zoom lens with 6 - 20 power as option) incl. integrated point splitting device incl. one precision collet holder and one set of double-tapered precision-collets of your choice (MP 16 for drill-dia. 3-16 mm, MP 6,5 for drill-dia. 1-6.5 mm or MP 20 for drill-dia. 6.5-20 mm) incl. 1 double sided grinding wheel dia. 125mm CBN (one side coarse [grit ~100] second side medium [grit ~200]) incl. wheel guard with connection system for vacum cleaner incl. 1 each of detailed operating manual with pictures, spare parts list, CD-Rom and CE-Declaration (on demand)

Year of construction: 2023, operating hours: 20 h, condition: new, functionality: fully functional, 🔥 3D printing filament Extrusion Line – DEMO Unit | 1.75–5 mm | Up to 100 m/min | 12 months warranty High-performance extrusion line for production of filaments (3D printing, welding wires, technical strings). Reliable, fully automated solution directly from manufacturer. Completely made in the European Union. _____ Key Features • Materials: ABS, PLA, PET-G, MARLEX, DOWLEX and others • Filament diameter: 1.75–5 mm • PLC control with an automatic operation • Triaxial measurement for precise diameter control • Continuous production (compensator - up to 140 m of filament) • 3-zone cooling tank (up to 80 °C) _____ Technical Data • Line speed: up to 100 m/min • Output: 5–20 kg/h • Screw diameter: 35 mm • Screw length: 30 L/D • Drive power: 9.2 kW • Cooling tank: 6 m • Spool size: 0.5–5 kg (no downtime during change) _____ Condition • DEMO unit – directly from manufacturer • Excellent condition • Available immediately • Full factory warranty for 12 months FCA BOCO price: 158 850,- EUR w/o VAT _____ Manufacturer Csdjy Ipflepfx Afwerc BOCO Pardubice Machines, s.r.o. (Czech Republic) Over 30 years of experience in plastics processing technology

Condition: new, functionality: fully functional, Year of construction: 2025, color: grey, overall weight: 1,300 kg, loading space width: 3,000 mm, loading space length: 7,000 mm, loading space height: 2,600 mm, Equipment: air conditioning, lighting, Container in the picture available in stock and ready for immediate delivery. Inspection and collection possible. We offer Villex Mega Block-Line Grey Containers in this offer, which can be used as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, living containers, or construction site containers. Dimensions: 7.0 x 3.0 x 2.6 m Delivery: Available nationwide Standard features: Condition: New & Assembled Exterior color: Black + Grey (as shown in the photos) External wall thickness: 50 mm Floor area: 21.00 m² Weight: 1300 kg 1x entrance door 2x windows – single-sash, fixed glazing, tilt function included Includes air conditioning for heating and cooling Electrics: 6x power outlets, circuit breaker + fuse, surface-mounted wiring (PVC) We manufacture your container individually according to your requirements! Optional customizations at extra cost: Custom sizes, e.g. 9x3 m, 4x2.4 m, double container, triple system, and more Various window sizes Different colors Floor colors Practical forklift pockets Lighting Credpfx Aey Egtujfwec Roller shutters Heating WC, shower, toilet, washbasin Kitchen Plastered interior walls And much more Delivery is usually carried out with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance via PayPal or bank transfer. Lead time nationwide for standard containers in stock is approximately 1-2 weeks after receipt of order, depending on the postal code area. We manufacture and deliver custom containers within 1-4 weeks.

Condition: new, functionality: fully functional, Year of construction: 2025, color: grey, overall weight: 1,300 kg, loading space width: 3,000 mm, loading space length: 7,000 mm, loading space height: 2,600 mm, Equipment: air conditioning, lighting, Containers shown in the photos are in stock and immediately available. Inspection and collection are possible by arrangement. In this offer, we provide Villex Mega Block-Line Black Containers suitable for use as office containers, sanitary containers, school containers, kindergarten containers, refugee accommodation containers, living containers, or construction site containers. Dimensions: 7.0 x 3.0 x 2.6 m Delivery: Available nationwide Standard Features: Condition: New & Assembled Exterior color: Black RAL7016 (as shown in the photos) Exterior wall thickness: 50 mm Floor area: 21.00 m² Weight: 1300 kg 1x entrance door 2x windows -> Single-sash, fixed glazing with tilt function Incl. air conditioning with heating & cooling functions Electrical equipment: 6x sockets, circuit breaker + fuse, surface-mounted wiring (PVC) We manufacture your container individually according to your requirements! Optional features available at extra cost: - Custom dimensions, e.g., 9x3m, 4x2.4m, double containers, triple units, and more - Various window sizes - Various colors - Floor color options - Practical forklift pockets - Lamps - Roller shutters - Heating unit Crjdpfxsy Egqmj Afwoc - WC, shower, toilet, washbasin - Kitchen - Plastered interior walls - Much more Delivery is generally carried out with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance via PayPal or bank transfer. Lead time for standard containers in stock is approximately 1-2 weeks nationwide after order placement, depending on postal code region. Custom containers are manufactured and delivered within 1-4 weeks. Collection and inspection are possible at Villex Container GmbH, Dortmunder Str. 90, 59427 Unna, by appointment during business hours by prior phone arrangement.

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Crsdpfx Afex D Dq Sjwjc Application Types Complete Production

Condition: used, EVG G95 Reinforcing mesh welding line 2.5x6m Welding lines for the efficient production of standard reinforcing mesh in medium to large lot sizes - Automatic and highly dynamic feeding of wires from coils - Top production speeds on single-step welding lines - Double point welding is perfect technology for thicker wire diameters Scope of supply: Full machine including stands Optional: Fixed spools up to exit conveyor Technical data: Diameter line and cross wire: 5 – 12 mm Line wire spacing: 100, 150, 200 mm Cjdpfx Afoymb Unoworc 36 horizontal line wire stands for 3Ton reel Cross wire switch with doubles horizontal pay offs Tying and mat lift machine not included Diameter line and cross wire: 5 – 12 mm Line wire spacing: 100, 150, 200 mm 36 horizontal line wire stands: for 3Ton reel Cross wire switch: with doubles horizontal pay offs

Year of construction: 2010, condition: used, METAL SHEET PROFILING LINE FOR TILE ROOF PANELS Reduced price due to urgent sale Scope of supply 1 Uncoiler 2 Front shear + coil guide table 3 Film applicator 4 Base parts of cassette type forming machine 5 Roll forming machine for roof tile for "COPPO" 6 Roll forming machine for rooftile for "ATIIKA" 7 Roll forming machine for rooftile for "T177.5" 8 Shearing (Cut-off) machine: Flying type 9 Drawing part 10 Auto stacker 11 Electric control panel Technical specifications - Manufacturer: IL Kwang (Korea) - Manufacturing: Year 2010 - Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) - Tensile strength: 250 ~ 320 MPA - Max. coil width: 1250 mm - Coil thickness: 0.35 – 0.8 mm - Max. coil weight: 15 ton - Outer coil diameter: Max. 1300 mm - Inner coil diameter: 508 mm - Line speed (length > 5 m): Max. 8 m/min - Speed control: Frequency control by inverter - Commercial voltage: 380 / 50 V/Hz 3 Phases - Surface (LxWxH): Approx. 30 x 8 x 5 m Brand of components - Motor: Siemens (ICE. type) - PLC + Inverter: Siemens 7 - Servo: Mitsubishi (with C.E ) - Touch screen: Pro-face (with C.E.) - Electric components: L.G (with C.E.) Commercial voltage: 380 / 50 V/Hz 3 Phases Line speed (length > 5 m): Max. 8 m/min Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) Crsdpoymbfysfx Afwoc Tensile strength: 250 ~ 320 MPA Max. coil width: 1250 mm Coil thickness: 0.35 – 0.8 mm Max. coil weight: 15 ton Outer coil diameter: Max. 1300 mm Motor: Siemens (ICE. type) PLC + Inverter: Siemens 7 Servo: Mitsubishi (with C.E ) Touch screen: Pro-face (with C.E.) Electric components: L.G (with C.E.) Speed control: Frequency control by inverter Inner coil diameter: 508 mm Surface (LxWxH): Approx. 30 x 8 x 5 m