Room Type Powdercoating Spraybooth

PROTON ROOMLINE

Year of construction: 2011, condition: used, Rated power: 5.5 kW Motor speed: 2930 rpm Max. operating pressure: 11 bar Dryer type: CT 8 Refrigerant: R134a Refrigerant charge: 0.260 kg Max. operating pressure (cooling system) HP 21 bar / LP 16 bar incl. Aquamat CF 3 oil-water separator Storage location: supplier Gbodoxtnvkopfx Afnoh

Condition: new, Year of construction: 2025, Blast Container High Cube Basic with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + extra blasting vessel filling, enabling extended blasting time without refilling. Type SC.20FHC.5800 Basic Standard Equipment, ready for operation (just add abrasive and connect power and compressed air): 1x Control cabinet with emergency stop, Siemens Logo controller 1x Pressure blasting vessel 1x Pressure regulator and water separator 1x Blasting hose DN 25 with 8mm blasting nozzle 1x Remote control with dead man's switch 1x Abrasive inlet box/hopper 1x Abrasive media sieve + collection container for coarse particles 1x Airwash separator for blast dust extraction (dust reduction during blasting) 1x Filter unit with pre-chamber separator 1x Suction wall with louvre-type impact separator 1x 4mm rubber wall lining with fabric insert 1x Tread plate floor 3/5 1x LED lighting 1x Emergency lighting, door-end switch, emergency stop 1x Breathing air filter 1x Blasting helmet 1x Blasting gloves 1x Coverall/suit Options: - Side Door Open: blast container can be fully opened from the side for easy forklift loading - Container widening - Container extension - Crane roof hatch Gbodjw Ivk Topfx Afnjh - 500kg crane runway - C-profile rail for powder coating - Blasting trolley - Filter with big bag - HEPA secondary filter for hazardous dust, e.g. when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor and much more upon request!

Condition: new, original Siegmund welding table perforated plate octagonal 2D or 3D 1200 x 200 with 28 mm hole 514 kg, diameter 1300 mm plasma nitrided Godpjt Sk Ndjfx Afnebh original price 8900.-€ in combination with positioner half price sold only in combination with positioner Hole holder 8 hole 500 x 500 diameter 18mm (see picture)

Year of construction: 2022, condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, face plate with clamping slots and manual remote control. Height (face plate horizontal): approx. 532 - 1.132mm Lifting distance/lifting time (hydraulic): approx. s = 600mm, t = 20s Swivel range of face plate: approx. +-300°. Gbsdpfxofw Ah Ro Afnsh Height (Pl.-sch.vertical axis): approx. 709mm Dimensions face plate: Ø1.200mm x 40mm, 6x clamping slots Speed of the main axle: approx. 2.0 rpm (other Torque main axis of rotation: approx. 7,500 Nm Face plate speed: approx. 2.5 rpm Face plate torque: approx. 1,500 Nm

Condition: new, Year of construction: 2025, functionality: fully functional, Dry Ice Cleaning Machine Model X-FORCE – Polish Manufacturer! This listing features a state-of-the-art X-FORCE dry ice cleaning machine, manufactured by the first Polish producer of such equipment. Our devices are sold worldwide and supported by an extensive service network. This is a professional, efficient, and reliable device designed for cleaning surfaces without the use of water or chemicals – the ideal solution for industry, workshops, maintenance, and restoration. Dry ice cleaning technology. Key advantages of the X-FORCE machine: • Polish manufacturing – quality assurance, robust construction, full service support, and spare parts availability. • High performance – effective cleaning with no surface damage. • Mobile and compact – easy to transport and operate. • Environmentally-friendly technology – dry ice cleaning without chemicals and no secondary waste. • Safe operation – 230V power supply, electric vibrator ensures stable ice feed. Technical Specification – X-FORCE: Parameter | Value Dimensions | 100 × 50 × 55 cm Weight | approx. 100 kg Dry ice hopper capacity | 37 kg Operating pressure | 1.7 – 20 bar Dry ice feed range | 0 – 3.5 kg/min Dry ice stream diameter | 1 1/4" Air consumption | 1.5 – 6.0 m³/min (5 bar) Power supply | 230V AC (50/60 Hz) Electric vibrator Applications: • Cleaning of injection molds and dies • Cleaning and maintenance of industrial machines and equipment • Restoration of metal, wood, and stone surfaces • Removal of paints, greases, oils, and industrial contaminants • Cleaning electrical and electronic devices (no risk of flooding) • Post-fire cleanup Why choose X-FORCE: When you purchase a machine from the original Polish manufacturer, you not only receive a high-quality device, but also: • 24-month manufacturer’s warranty • Technical support and operator training • Access to accessories and spare parts • Warranty and post-warranty service on all continents! We are the only dry ice cleaning machine manufacturer offering a 24-month warranty. Brand new machine, ready for operation. Gjdpexy Ilfofx Afnebh Customisation of machine parameters and colour schemes available for larger orders.

Condition: new, Year of construction: 2025, functionality: fully functional, Blasting container for blasting with glass beads, ceramics, corundum, hard cast gravel, garnet sand, etc. Blasting container with full-surface screw conveyor floor and real blasting agent preparation. No sweeping, vacuuming and shoveling of abrasive in the blast room during the blasting of your workpieces thanks to our circulation system. Gbjdpfx Aeuwlzyefnoh Blast media cleaner air separator 4-fold adjustable air volume/ flow speed/ suction proximity to the blast media/ blast media layer height adjustment. Electric vibrating screen for permanent coarse separation. Bucket elevator with trapezoidal threaded spindle for belt tensioning and speed monitoring. Container lining with a 70shore 4mm fabric rubber for a service life of up to 30 years with proper use. Container can be opened completely to the side for easy forklift loading. Container can be upgraded with a crane overhead hatch, floor reinforcement, lateral blast room extension. When blasting stainless steel, the container can be upgraded with a real magnetic drawer or a magnetic drum separator as well as stainless steel grating. Filter system with easy maintenance doors, big bag dust bagging, H13/14 secondary filter and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special warranty of 5 years on the essential parts of the blasting system included. Safety equipment: Door/gate limit switch, dead man's control, emergency lighting, blast room viewing window, emergency stop in the blast room and on the outside of the control cabinet, pressure vessel quick ventilation

Condition: excellent (used), Year of construction: 2013, Alpha 1550XS - Cycle lathe incl. accessories Center distance is 1500 not 2000 Multifix holder 16 pieces Year of construction 2013 Top condition (really in top condition) Various interchangeable jaws (soft jaws) steady rest Godpfjunruyjx Afnobh face plate Spindle bore 104mm Turning over bed 550mm Three-jaw chuck 315mm

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Gbodpfx Afjtr Ud Ssnjh Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Gbodpfjd Ixadsx Afnjh Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Year of construction: 2007, condition: used, machine/vehicle number: 46650051, Horizontal machining centre Gbsdpfxjgay Evs Afnoh with multipallet+B39 NIIGATA SPN 501-P8 FANUC 18I-MB Accessories: Chip conveyor High pressure cooling system through the spindle the spindle line