MADREW DCKRD-50 edger

madrew dckrd 50

Condition: like new (used), Year of construction: 2008, Üstünkarli UDKP 160 Cutting height 160 mm Hfodpfx Asucnudjg Usb Chain bed approx. 420 mm With spikes in the chain bed Including slat bush and spacer rings Main engine 75kW

Condition: excellent (used), Storti RM 500 edger - Italian production Hjdpfx Agsk Talpo Ujfb - year of production 1993 - electric spacing of discs TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm - engine power 2 x 22kW - max element width 600 mm - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers - electric disc adjustment - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Transport dimensions 500x240x180 cm weight 3500 kg

Condition: excellent (used), functionality: fully functional, Vertical, double-sided press for wood by C.O.P.E. Two working fields with dimensions of 620x110cm. Hjdpfxeudy A Ne Ag Uefb

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg Hodpfjidmptjx Ag Usfb

Condition: good (used), Sorting Car / Sorting Crane Baljer & Zembrod Crane ASX1 Inner track width: 2.5 meters Hjdpfx Agjv I A Iho Uofb With cross-cut saw (has not been used for a long time) With cutting rack With tracks With cable (1 year old) Immediately available Location: Austria, near Villach

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Very stable creel roller conveyor with hydraulic lift and lowering cross conveyor. 1st part: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Hjdpfx Aet Hg Hueg Uefb Overall height 1,000 mm. Built-in hydraulic lifting and lowering cross conveyor With 4 chain strands. Spacing: 1,500 - 1,300 - 1,000 mm. Fully plated. Hydraulic model support rollers. Drive via geared motor. New bearings. 2nd part: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lifting and lowering cross conveyor with 6 chain strands. Unsupported, it is possible to convey the cut material under the roller conveyor to the left or right. Fully plated. Including hydraulic unit for both roller conveyors.

Condition: good (used), functionality: fully functional, Screen area: approx. 1,300 x 4,000 mm new semi-mobile steel construction Hsdpfx Ajtpgvxeg Uofb

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height - length of slats in one field mm mm 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. Hedpstrl R Aofx Ag Usfb O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Condition: ready for operation (used), Habermann Pump-units Hjdpfx Agsi A Aqvs Usfb 1=Type HPK 150/450 In 200mm, Out 150mm Cap.: 400-600 cub/h Driving: E-Motor 90 kW 2=Type HPK 200/560 In 250mm, Out 200mm Cap.: 450-800 cub/h Driving: E-Motor 90 kW Both including : Chassis and Spare-parts

Year of construction: 2004, condition: ready for operation (used), SECOND-HAND CNC DOUBLE SIDED ROUND END TENONER BACCI TSD-E-NC14 - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - touch screen NC control - with loader CSF - safety net - S/N 800 - CE rules (year 2004) - RECONDITIONED Hsdoinbk Ropfx Ag Usfb