Single Screw Extruder 25/25 LD

Condition: used, Kantenanleimmaschine - Edge Gluing Machine Sumbel Perkeo Year 2014 - Serial-No. 40050 Working width max. 60mm Kaltleim / Cold Glue System Kodpjwgdw Tsfx Aa Eenf --wie neu / like new-- Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Multivac thermoformer currently setup to produce ‘hotel style’ jam packs, 14g and 20g. 32 portions per cycle. Could also be used to produce ice cubes, sauce packs, ketchup, stock etc. Can also be supplied as a line with M&P 32 head filler and end of line tray wrapper if required (at extra cost). Knsdpfx Aaetp N Dde Eef

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome Knedpfxeiyyndj Aa Esf

Condition: new, Year of construction: 2024, Saw Saw blade rotation speed 3000 / 4000 / 5000 RPM Diameter saw blade and bore 300 – 400 mm, 30 mm Sawblade tilting 90° – 45° Cutting depth at 90° / 45° 125 mm / 90 mm Cutting width parallel fence, version Z400 M, Z400 EL 1350 mm (option 1000 / 1525 mm) Cutting width parallel fence, version Z400 X1, Z400 X3 1250 (option 1500 mm) Cutting length 3500 mm (option 2500 mm / 4100 mm) Dimensions cast iron table 985 mm x 710 mm Dimensions sliding table 3200 (option 2200 mm / 3800) mm x 420 mm Dimensions cross-cut table 1420 mm x 650 mm Kodpfx Aeglfv Sea Esnf Length of swiveling cross-cut fence 2295 mm (telescopic 3000 mm) Scoring unit Diameter scoring blade and bore 120 mm, 20 mm Cutting depth with 120 mm diameter blade 3,5 mm Scoring blade rotation speed 8200 RPM Scoring saw motor power 1,3 kW / 2 hp (S6) Weight 850 kg (Z400 – 3200) – 1080 kg (Z400 X3 – 3800) Voltage 400 V 3 phase (option 230 V 3 phase) Motor power (3 phase) 7 kW /9,5 hp (S6), option 9,2 kW / 14 hp (S6)

Year of construction: 2024, operating hours: 10 h, condition: like new (used), Extrusion Line with Densifier – Ideal for Recycling Applications Kjdpfetziudex Aa Ejnf This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Key Features: • Suitable for all types of polyolefins • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials.

Year of construction: 2014, condition: refurbished (used), REEPAK REEFLOW 250 ID.NO. 2050 Reepak mod Reeflow 250 flowpack machine from 2014 which has previously packed apples but is suitable for all kinds of food etc. Dimensions max packaging L 600 x 250 mm H 100 mm. NOTE THE MACHINE IS IN NEW CONDITION! Dimensions 570 x 145 H 205 cm. Knsdpfeg Rcabjx Aa Eef

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Knodpfogwt S Tjx Aa Ejf Please do not hesitate to contact us.

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Knsdoumubyspfx Aa Ejf Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February.

Condition: good (used), Year of construction: 2011, Industrial robot Manufacturer: Kuka Model: KR30L16-2 (SafeRobot) Year of manufacture: 2011 Reach: 3102 mm Weight: 700 kg Payload: 16 kg Kuka controller KRC2ed05 (SafeRobot) Weight: 185 kg Processor: 2 GHz Operating system: WinXP Software version: V5.6.6 Kuka Teach Pendant KCP2 Kuka connection cables 7m/15m 101225ä Kjdon Uv S Aepfx Aa Eonf

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder BH45-30D with barrier screw and mixing section. 45mm extruder with 30L/D screw length The extruder is equipped with a new control system full function-tested Kjdeuxa Abjpfx Aa Eonf Several extruders of the same type available !