Weighing and packaging machine for frozen foods

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: - Mountable base cabinet Hodpfxolb I Das Acvek - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: excellent (used), Year of construction: 2022, The chiller unit was in rental use with us for one year. The chiller features two refrigeration circuits and fan control. The cooling capacity is 240 kW at 7/12°C and an ambient temperature of 35°C. The refrigerant used is R140a. All our pre-owned chillers undergo a new leakage test and maintenance before delivery. Hjdpfoi If Rdox Acvjk

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, machine/vehicle number: 0901 0009, cutting height (max.): 10 mm, nominal flow rate: 3,000 m³/h, table length: 1,900 mm, table width: 1,450 mm, TECHNICAL DETAILS Working area: 1,900 x 1,450 mm Cutting thickness: 10 mm MACHINE DETAILS Knife system: Oscillating drag knife and ultrasonic knife Airflow rate: 50 m³/min Electrical data Voltage: 400 V, 50/60 Hz Number of phases: 3 Ph / N / PE Connected load: 3.5 kVA Main fuse: 16 A Hsdpjyu Ry Nefx Acvjk Control voltage: 24 V DC EQUIPMENT Vacuum unit conversion to Rovicore RTM vacuum table with distribution channel

Condition: ready for operation (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 20190824, feed rate X-axis: 33 m/min, overall weight: 2,800 kg, rotational speed (max.): 6,800 rpm, workpiece height (max.): 100 mm, workpiece width (max.): 180 mm, Four-side planer with only 100 operating hours! TECHNICAL DETAILS Material width: 20-180 mm Material thickness: 8-100 mm Infinitely adjustable feed speed: 8-33 m/min Spindle diameter: 40 mm Spindle 1 - bottom: Ø125 mm (Ø152 mm groove cutter), 4 kW Spindle 2 - right: Ø115-170 mm, 4 kW Spindle 3 - left: Ø115-170 mm, 4 kW Spindle 4 - top: Ø105-150 mm, 5.5 kW Spindle speed: 6,800 rpm Roller feed system dimensions: Ø140x35x50 mm Extraction connection diameter: 4 x 120 mm MACHINE DETAILS Feed motor power: 3 kW Total electrical connection load: 21 kW Operating voltage: 400 V, 50 Hz, 3-phase Required air pressure: min. 6 bar Dimensions & Weight Dimensions (L x W x H): 3,040 x 1,600 x 1,680 mm Weight: 2,800 kg Feed table length: 2,000 mm Operating hours: 100 h EQUIPMENT Solid cast and welded steel frame Chromed worktable for secure material feeding Side guide rollers for material with pneumatic drive Professional cardan shaft drive for the feed system Manual central lubrication unit Radial and axial adjustment of working spindles with mechanical indicators for precise positioning Hodpfxjyu Ii Ij Acvjk Electric adjustment of working height Ergonomically positioned control panel according to EU standard

Condition: excellent (used), Auger diameter: 24 cm Maximum discharge height: 200 cm Horizontal length: 300 cm Hsdpjyurydefx Acvok The machine is fully operational and ready for work. I have two identical units available. The listed price is per unit.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Hodeyu If Njpfx Acvok Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, The machine is in like-new condition! The technical data is provided by the manufacturer. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Press force: 594 kN / 60 t Specific pressing force: 45 N/cm² Cycle time in idle mode: 25 s Idle press capacity (theoretical): 32.5 m³/h Hsdpfoyqw Sqsx Acvsk Filling height: 1,115 mm Feed opening dimensions: 1,195 x 650 mm Bale dimensions: 1,200 x 1,200 x 1,100 mm Max. bale weight: 550 kg Material to be pressed: Film, mixed paper, cardboard, punching waste MACHINE DETAILS Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Door design: Sliding door Door lock: Hydraulic Type of loading: Manual Consumables: Wire, looped wire Dimensions & Weight Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg EQUIPMENT HSM TCS (TorsionControlSystem) for monitoring the inclination of the press plate Automatic start of the pressing process

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A25-M5-22-48408, repeat accuracy: 0.004 mm, number of axes: 7, The new price of the machine in 2023 was €48,700! TECHNICAL DETAILS Number of axes: 7 Arm length: 2.5 m Repeatability: 0.0042 mm Hodpjyqwgbsfx Acvok Volumetric accuracy: 0.054 mm MACHINE DETAILS Calibration date: 03.2023 Operating temperature range: 10 °C – 40 °C Operating humidity: 95% (non-condensing) Operating voltage: 100 – 240 V AC Frequency: 47/63 Hz Notes: Without CAM2 probe/touch Professional license Specifications, information, and technical data are provided by the manufacturer; therefore, no guarantee can be given by the seller.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 90 207, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 2,000 rpm, quill stroke: 100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,000 mm Travel Y-axis: 500 mm Travel Z-axis: 650 mm Spindle speed range: 40 - 2,000 rpm Quill stroke: 100 mm Feed speed range: 5 - 2,000 mm/min Hedpfxoyv Avte Acvok Rapid traverse: 4,000 mm/min Tool holder: SK 40 MACHINE DETAILS Control manufacturer: Heidenhain

Condition: not inspected (used), functionality: unexamined, turning diameter over cross slide: 160 mm, turning length: 1,000 mm, turning diameter: 315 mm, spindle speed (max.): 3,300 rpm, bar passage: 52 mm, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nTurning diameter: 315 mm\nTurning diameter over cross slide: 160 mm\n\nTurning length: 1,000 mm\n\nSpindle speed range: 30 – 3,300 rpm\n\nSpindle bore: 52 mm\n\nNumber of tool changer positions: 12\n\nMACHINE DETAILS\n\nControl model: Siemens Sinumerik 802 D\n\nMachine weight: approx. 6 t\n\nNote: The machine has been overhauled! Hjdpfjyv Aucox Acvok

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, mileage: 69,200 km, power: 75 kW (101.97 HP), overall weight: 4,900 kg, sweeping width: 2,100 mm, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nSweeping width: 2,100 mm\n\nMileage: 69,200 km\n\nMACHINE DETAILS\n\nPermissible total weight: 4,900 kg\n\nTotal power requirement: 75 kW Hsdpfx Acoyv Atfjvsk

Condition: not inspected (used), Year of construction: 1986, functionality: unexamined, travel distance X-axis: 2,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 1,700 rpm, controller model: Heidenhain TNC 155, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 900 mm Z-axis travel: 1,000 mm Clamping surface: 2,200 x 960 mm Spindle speed range: 20 – 1,700 rpm Tool holder: SK 50 Rapid traverse: 10 m/min Number of milling head positions: 4 MACHINE DETAILS Hodpjyv Ar Ujfx Acvek Control model: Heidenhain TNC 155 Dimensions & Weight Space requirement (L x W x H): approx. 7,000 x 4,200 x 2,900 mm Machine weight: approx. 16 t