Sand mixers, core sand mixers

Lueb, WLB, Eirich

Condition: good (used), Year of construction: 2006, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, table width: 1,000 mm, table length: 600 mm, table load: 500 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, Equipment: chip conveyor, Accessories: Approx. 40x SK-40 tool holders (without cutting tools) Operating hours: 32,379 h (as of July 9, 2024) Spindle running time: 15,674 h (as of July 9, 2024) Clamps on table are not included! Prsdpfxsxcpkzs Aa Ejf Machine available from: Imediately

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Prsdeh Ha Ipepfx Aa Ejf Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm column diameter 56 mm casting capacity 55 kN Podpfx Ajfrvzvea Esrf casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: excellent (used), Control : D.Electron Z 32 centre height 220 mm Centre distance 1000 mm turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm width of lathe bed 320 mm spindle mounting CL 6" spindle bore 62 mm spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min quill travel by hand 200 mm quill diameter 80 mm quill mounting MK 4 Podpsd Sitkefx Aa Ejrf

Condition: good (used), Year of construction: 1989, total height: 6,450 mm, For sale Beche short-stroke die hammer KGH 4B. Machine weight 65 t Working capacity 40 kJ max. impact frequency 98 min max. usable number of blows 41 min Prodjrt Uc Espfx Aa Ejf max. bear stroke 790 mm Machine is disassembled Technical data on request

Condition: excellent (used), 90 running meters pallet rack Stow Used, very good condition, see pictures height 6 m depth 100 cm beam length 2,70 m Load / compartment 3000 kg Prsdpfxeiwkn Rj Aa Ejf Frame blue Carrier orange Negotiable price: € 8.650,-- net ex stock Offer consists of: + 33 pcs. frames pre-assembled, 12t field load, depth 100 cm, height 6 m + 192 pcs. beams, length 2,7 m, 3000 kg payload/slot + 384 pcs. suspension locks + 132 pcs. concrete anchors Load plate Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Fast - flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 103 mm Tip width 1000 mm Circumference diameter over bed 500 mm Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Prsdpfxod I A Dhs Aa Eef Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Quilltravel 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,750.00 kg Dimensions 2500 x 1100 x 1380 mm

Condition: excellent (used), Year of construction: 2020, Manufacturer: Greif Velox Year of manufacture: 2020 Prodpfx Aaowcfwys Eef Type: BVP Particle sizes: 30 μ - 5 mm Bag size: 9.5 - 30 kg Bag capacity: up to 250/h Containers: Valve bags made of paper, PE, PP fabric Fully automatic single-spout system with bag feeder, 500-liter pre-bin, dust extraction without collection container, control panel 1x conveyor belt 650 x 2,000 mm

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in Predpsuxmt Tjfx Aa Ejf high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: refurbished (used), For Sale: EOS P395 – Guaranteed Working Condition This EOS P395 is fully inspected and revised by Inframotion 3D (IM3D) to ensure top performance. Equipped with a reliable Synrad CO2 laser, this machine is ideal for efficient SLS production. Included in the package: • 2 build frames • Water cooler Materials Highlight We offer a range of plug-and-play materials that are fully tested and optimized for use with EOS systems. Our Inframotion PA12 provides exceptional performance and offers significant cost savings compared to OEM powders. By switching to our materials, you can lower production costs without sacrificing quality or reliability. Services Included: • Transport & Installation: We ensure safe delivery in the original EOS packaging and provide professional installation. • Warranty & Maintenance Plans: Flexible options are available to meet your needs. Pedpfjq E I A Dsx Aa Eerf About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines and provide comprehensive support. As the only provider offering a complete solution for used EOS equipment, we deliver unmatched expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades by skilled ex-EOS technicians. • Exclusive materials: High-quality consumables like our plug-and-play PA12, tested and optimized for EOS systems, offering significant cost savings. • Complete support: From transport to tailored maintenance plans, we handle everything. Trust IM3D for dependable machines, premium materials, and the expertise to optimize your SLS production. Contact us today for more information or specific inquiries!