Roller conveyor

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the help of the spark spectrometer, the alloy contents and accompanying elements of macroscopic solid samples can be can be determined with high precision down to the ppm range. Different analysis methods are available for the base materials iron, aluminum, magnesium, copper, nickel, titanium and lead, measuring methods adapted to the relevant alloy families are available. Advantages: Fast analysis within a few seconds Highly accurate spectral analysis including C and N Compact design (table-top device) Areas of use / application: Testing the chemical composition of 31 ferrous and non-ferrous metals Composition of 31 ferrous and non-ferrous metals metals, nitrogen and other elements Description of the system: Open spark stand for high sample throughput Wide range of sample geometries possible Simple change of base Gsdou S Ahqepfx Ag Rjbg The following elements are available as a base: Al, Cu, Fe, Mg, Ni, Ti, Pb The analyzable elements and concentration levels depend on the methods available for the respective base element Usable wavelength range 170-670 nm Output of measured values in concentrations or intensities Selectable output units (%, ppm) Output of statistical characteristic values (mean value, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm, the applicable and configured wavelength range is wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized to customer requirements Expansion with additional modules possible on site Spark stand: Open spark stand for high samples Throughput and various sample geometries Minimized argon consumption thanks to argon saving module Optimized argon flow Reduced cleaning intervals Spark stand plate can be easily replaced Temperature-absorbing design without water cooling Integrated shutter system for optimum plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. Spark duration: 4000 µs Max. Spark power 4 kW Display system: Separate microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/quality Results Manager Online maintenance scheduler Ambient conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity:

Condition: excellent (used), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive, graphical user interface (GUI) running on Microsoft Windows XP Professional. Instrument configuration includes the following features: • Magnification range: 5x – 300,000x • Acceleration voltage: 0.3 – 30 kV • Tungsten filament cathode (LaB6 cathode optional) • Large fully motorized sample stage with eccentric tilt capability, including: – Graphic navigation on the sample holder – Easy sample navigation via click-center-zoom – Field-of-view controlled navigation via two navigators – Relative coordinate navigation – Save and recall of sample positions – Adjustable stage field-of-view selection • Field-of-view correction during rotation via computer-driven eccentric rotation • Field-of-view correction during tilting via computer-driven eccentric tilting • Calculation of the possible tilt angle based on sample geometry • Automatic focus tracking when moving the sample in the Z-axis • Intelligent limit switches for all motorized axes • Stage travel: X = 125 mm Y = 100 mm Z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) • Secondary electron detector for high vacuum operation • Newly designed, super-conical objective lens for optimal resolution at high tilt angles • Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV • Simultaneous live imaging with multiple detectors • Powerful image measurement functions • Movie function for recording dynamic processes • Versatile specimen chamber with numerous expansion options: free ports for EDX, WDX, EBSD, cathodoluminescence, etc. • Low-maintenance, quiet pump system consisting of a fore vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control • Comprehensive safety procedures against misuse and external media failure • Ergonomic, height-adjustable system table • SEM starter kit including 2 sample holders, tool kit, and 6 replacement filaments Additional equipment for SEM: Gedpfxomn Rcqo Ag Rsbg • Turbomolecular pump (instead of standard diffusion pump) – Use of a turbomolecular pump eliminates the need for cooling water during SEM operation. Further SEM equipment: • PC for SEM control including TFT monitor • ΟΧ200 Bruker Quantax 200 Extended EDX System – Bruker EDX software will be transferred to new owner upon purchase • Nitrogen-free, energy-dispersive X-ray analysis system including: – SDD detector with 127 eV energy resolution or better – Detection for all elements from boron upwards – Vibration-free, maintenance-free. Peltier cooled (no nitrogen required) – Pulse processor – TFT monitor – Spectrum measurement and element identification – Fully automatic, quantitative, standardless elemental analysis – Image acquisition – Ultra-fast qualitative line scan – Ultra-fast qualitative element mapping – Data management and archiving system – Report generation and results output – Data communication – Installation and user training – HyperMap – Multipoint analysis – Bruker xFlash detector (SDD) with signal processing unit SVE III Scope of delivery: (see photos) Condition: used (Subject to changes and errors in the technical data and specifications!)

Condition: used, SANDWICH PANEL LINE FOR DOORS AND WALLS : 610mm width Made by METECO This sandwich panel production line is designed to manufacture doors & walls panels up to 610mm with an annual capacity of 1.500.000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1.500.000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper sheet metal treatment section - 10 T upper unwinder with coil carriage - Pinch-Roll and roller passage - Upper reel steel frame - Polyethylene film applicator - Embossing machine for texture pattern - Press for decoration pattern - Profiling machine with upper rollers (12 stands) - Steel upper frame for profiling machine - Upper sheet guide 2. Lower sheet treatment section - Lower 10 T double unwinder with reel carriage - Polyethylene film applicator Gbedpfjvtpcisx Ag Rsg - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Rollway - Operator desk for entry line 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Outfeed roller conveyor - Sawing machine for cutting - Soundproof cabin - Dust extraction unit - Operator Control desk 4. Stackable section - Automatic panel tilter - Stackable conveyor - Extraction conveyor - Packaging section - Styrofoam spacer feeding system - Infeed conveyor - Packaging machine - Extraction conveyor - Wrapping machine 5. Panel production equipment - Top roller forming tools - Bottom roll forming tools 6. List of additional machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Thickness: 40 - 80 mm Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1.500.000 m panel/year

Year of construction: 2002, condition: excellent (used), GILDEMEISTER LATHE CTX 420 V6 SIEMENS 840 MATR. 2260000551 YEAR OF CONSTRUCTION 2002 SIEMENS 840 NUMERICAL CONTROL C- and Y-axis WITH 12-POSITION MOTORIZED TURRET RADIAL VDI 40 Godpfx Aomv H Dxsg Rebg EQUIPPED WITH: 1) THROUGH CYLINDER DIAMENTRO 66 2) SELF-CENTERING CHUCK AUTOBLOK MOD. 250-66 BHD ON THE MAIN 1) AUTOBLOK SELF-CENTERING CHUCK MOD. 175/52 BHD ON THE COUNTER SPINDLE 1) CHIP CONVEYOR 1) 5-BAR COOLANT PUMP 1) WORKPIECE UNLOADING ARM TRUNCATED FROM BAR

Condition: excellent (used), Sandblasting machine De Laurentiis model 100 TS year 2002 Gjdpfx Ajrxr Rgeg Rsbg

Condition: excellent (used), Coating and packaging line with thermo-shrinkable film, consisting of: a) Double conveyor belt (mm 3000 x mm 1100) for application of corner protections. - Adjustable feeding speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total length of the machine (with motorised belt) mm 7600 approx. - Reel holder (6 upper reels max width mm 2450 + 6 lower reels max width mm 1450) - Slitter and transversal welding machine (mm 2500) - Max useful height mm 700 - Installed power KW 12 - With automatic device to pack light pieces (from 1 to 5 Kg) by welding bar c) Shrinking tunnel total length about 4700 mm (of which about 3700 mm are of the tunnel) with hot air circulation (heating by electric resistances and fan), total installed power KW ? - conveyor with metal rods (width mm 1500 approx.) - Max useful height mm 700 - Adjustable feed speed from 4 to 20 m/min Gsdpfx Ajgp Diasg Rjbg d) Outlet roller conveyor "ELME" (idle rollers) for cooling (mm 3000 x 1500 ca.)

Condition: new, Capacity, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radius difference ----- 90 mm Bending speed/repeatability ----- 500º/s. ±0.05 Tube length ----- 1 350 ∞ mm Weight ----- 2200 kg Machine dimensions ----- 3.0 x 1.2 x 1.3 m Tube rotation ----- 0-850°/sec Length feeding ----- Standard 0-2 400 mm/sec Booster ----- 0-1 200 mm/sec Degree of tolerance ----- 0,05°/mm Bending head rotation ----- 0,75 sec Standard components conform to VDMA, ISO and DIN standards. Gedpfsga T Exjx Ag Rsbg OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with free programmable robot or loading arm arm * Weld seam detector and tube positioner electromagnetic or optic detection * Free radius bending * Simulation/Collision Control * Bed length extension

Condition: used, functionality: fully functional, Foundry - Inventory Complete inventory of the sand casting foundry in Venlo-Lomm, Netherlands HWS molding line, type SFM2 / 30 boxes per hour Control system S/7 Hopper mill Core shooter Röper H6.5 - H16, hydraulic – control system S/7 Gsdpjvz Aprjfx Ag Rjbg Core sand mixing unit, manufacturer Klein YXLON X-ray system Spectral analysis Spectro Ideco analysis device Molding machines Sand preparation Melting furnaces Belt grinder Hazardous goods container Drying oven Band saw Blasting unit Overhead crane 32t / crane rail: 5750 mm / year 2002 You are cordially invited to inspect the foundry. Equipment and items are sold in used condition. The seller excludes any warranties.

Year of construction: 2025, condition: new, functionality: fully functional, working width: 2,400 mm, wire diameter (max.): 8 mm, mesh size: 6,000 mm, welding power (max.): 900 kVA, Double cross wire mesh welder VM-15/25-1000NC-UD-2C Gbsdjuv Eg Hspfx Ag Rog Technical characteristics - power: 14 x 63 kVA - drawing motors: 155 kW - el. voltage: 3 x 400 VAC - controlled by: PC - wire mesh dimension: 6000 x 2000 mm - wire diameter: 4-8 mm/6-10 mm - distance between line wires 150 mm and 200 mm - distance between cross wires from 150 to 200 mm - working speed 180 cross wires/min - machine dimension: 55 x 11 x 4 mm - machine is operated by two workers

Condition: used, Manufacturer: Maurer Type: Smoke chamber for 2 trolley Electric heating 48 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Gbodpstulp Sefx Ag Rsg Cleaning: foam cleaning Without an after-burning system Installation dimensions of the machine in cm: Width: 158 Length: 250 Height: 250 Trolley dimensions in cm: 100 x 100 x 200