Tanker truck
- Wasserpumpe 4,3 ltr, 108m³/Std 1.800l/min, Pumphöhe: 17 - Preis je nach Größe

Fixed price plus VAT

€3,900

Condition

New

Location

Bovenden

Tanker truck - Wasserpumpe 4,3 ltr, 108m³/Std 1.800l/min, Pumphöhe: 17 - Preis je nach Größe

- Wasserpumpe 4,3 ltr, 108m³/Std 1.800l/min, Pumphöhe: 17 - Preis je nach Größe

Machine data

Machine type:: Tanker truck

Model:: - Wasserpumpe 4,3 ltr, 108m³/Std 1.800l/min, Pumphöhe: 17 - Preis je nach Größe

Condition:: new

Price & Location

Fixed price plus VAT

€3,900

Seller location:: Alte Bundesstraße 48, 37120 Bovenden, Germany

Call

Technical details

Driver cabin:: other

Gearing type:: other

Details about the offer

Listing ID:: A8271326

Reference number:: 2907

Update:: 07.07.2026

Description

Vehicle location: en route / in transit
Design: self-priming water pump, self-lubricating with separate motor, dirty water pump, motor KD350 C5, air-cooled, max. flow rate 1800 liters/min (108 m³/h), pump head 17 m, protection class IP 23, self-priming, impeller made of graphite cast iron, spiral made of graphite, mechanical seal silicon carbide, centrifugal pump for supplying and draining, conveying highly contaminated media up to 20 mm particle size, standard equipment: sieve, screw connections, clamps, operating and maintenance manual, weight 90 kg

Technical data:
Max. flow rate: 1800 l/min (108 m³/h)
Max. suction height in m: 8
Suction diameter (mm): 100
Discharge diameter (mm): 100
Particle size (mm): 20
Self-priming: yes
Weight approx. kg: 90
Dimensions L x W x H in mm: 715 x 570 x 590
Motor type: 1-cylinder, 4-stroke S.V.
Motor: KOHLER KD350 C5
Autonomy (h): 4.3
Fuel: Diesel
Dusdpfoi Rqr Tex Akkew
Tank capacity (liters): 4.3
Starting system: Recoil starter
Price varies depending on size! Suitable for water tank, see -6112-, -6113-. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2002

2,483 listings online

Call

Send inquiry

Telephone & Fax

+49 551 8... show

Fax:

Add to watchlist

Share Report listing

These listings may also fit your interest.

Listing

MIG-MAG gas-shielded arc welder FRONIUS T.I.M.E Synergic 450

Rödermark

1,235 km

MIG-MAG gas-shielded arc welder
FRONIUST.I.M.E Synergic 450

Call

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0518018, Offer 24600 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 14 linear meters Djdsvncfmopfx Akkjuw - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

See details

Listing

Bocholt

1,018 km

Welding machine
BoehlerTerra NX 400

Call

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes Dujdpjw Rm Sasfx Akkjw

See details

Listing

Rödermark

1,235 km

MIG-MAG gas-shielded arc welder
FRONIUST.I.M.E Synergic 450

Call

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618012, Offer 24604 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case Duedpfx Akovncubjksw - intermediate package device - wire feed case 1 linear meter - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

See details

Listing

E-welding device, stick electrode welding machine, electric welding power source ESAB LTG 250

Hessisch Lichtenau

1,244 km

E-welding device, stick electrode welding machine, electric welding power source
ESABLTG 250

€380

Fixed price plus VAT

Call

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Dodpfsd N E Rvox Akksuw Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

See details

Listing

WIG and Electro DC welding machine, WIG welding machine, E-welding machine also for stick electrodes DALEX GL/W 201

Hessisch Lichtenau

1,244 km

WIG and Electro DC welding machine, WIG welding machine, E-welding machine also for stick electrodes
DALEXGL/W 201

€750

Fixed price plus VAT

Call

Condition: used, Wig welding machine, DALEX, type GL/W 201 WIG welding machine Machine no.: 201, year of manufacture approx. 1995 Power: 200 amps, 35% duty cycle 160 amps, 60% duty cycle 120 amps, 100% duty cycle Adjustment range: stepless Type of current: DC - direct current Mains connection: 400 volts, 50 Hz, 5.9 kVA, 32 amp plug Dujdpfji E Izvsx Akkew - 2-cycle and 4-cycle welding system - WIG hose set, 8 meters - HF ignition - Shielding gas pressure regulator - Electrode welding for coated electrodes - Fan cooling - Connection socket for foot switch (without foot switch) Space required L x W x H: 850 mm x 450 mm x 700 mm Weight: 90 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise, the machine is in very good condition.

See details

Listing

Rödermark

1,235 km

MIG-MAG gas-shielded arc welder
FRONIUST.I.M.E Synergic 450

Call

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618019, Offer 24589 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. Djdovnb Tpjpfx Akkjuw - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

See details

Listing

Eilenburg

1,429 km

Flatbed truck
STEYR12 M18/4x4 Pritsche

€19,840

Fixed price VAT not applicable

Call

Condition: used, mileage: 158,032 km, power: 130 kW (176.75 HP), first registration: 04/1987, fuel type: diesel, overall weight: 11,500 kg, axle configuration: 2 axles, color: brown, gearing type: mechanical, Equipment: all wheel drive, Errors and prior sale excepted! Internal number: 0633.2MY2407 Dedpeh Udydjfx Akkjuw ---- EQUIPMENT Frame for tarpaulin Flatbed All-wheel drive ... and more ---- The vehicle has not been refurbished! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing/leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

See details

Listing

TIG welding machine Messer Griesheim GW 200

Weiterstadt

1,224 km

TIG welding machine
Messer GriesheimGW 200

Call

Listing

Enschede

1,021 km

Profit cutting machine
AYEL-TECHM36

Call

Listing

Kopierer-Welt - Long sheet feeder BDT VX 370 long sheet feeder Canon + Ricoh

Langenfeld (Rheinland)

1,065 km

Kopierer-Welt - Long sheet feeder
BDT VX 370 long sheet feederCanon + Ricoh

€3,490

EXW Fixed price plus VAT

Call

Condition: good (used), In this offer you acquire a used longbow feeder "Canon BDT VX 370". Item for sale: 1 x Canon BDT VX370 suitable for: Canon imagePRESS C10000VP Canon imagePRESS C8000VP Ricoh Pro C7100 Serie Ricoh Pro C9100 Serie Condition: This is a used unit and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The unit has been tested for function Djdjl Axtgjpfx Akkjuw Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available upon request! Before shipment or collection, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

See details

Advertise here