Moulder

Leadermac Speedmac 631 not Weinig

Condition: reconditioned (used), Year of construction: 2013, Leadermac Speedmac 631 Working width: 310 mm, height: 150 mm. Spindles: 6 x 50mm (4x spindles with inverter speed control Bottom (22 kW) - 6000 rpm outboard bearing Right (15 kW) - (4000 to 9000 rpm) straight jointer Left (15 kW) - (4000 to 9000 rpm) straight jointer Cgedpfx Agjyl Rl Tszep Top (22 kW) - 6000 rpm, outboard bearing, Top (22 kW) - (4000 to 9000 rpm), outboard bearing, straight jointer Bottom (22 kW)- (4000 to 9000 rpm), outboard bearing, straight jointer Electronic spindle position adjustment as follows 1. 3rd spindle width adjustment. 2. 4th spindle thickness adjustment. 3. 5th spindle thickness adjustment. Feed speed 60m/min (Possible to increase). Top feed rollers 200mm (first 2) and 140mm others Connection: 380 V / / 50 Hz Full Documentation included.

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Cedpfx Aew Sy T Hegzsgp Storage location: Nattheim

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Cgodpfx Agswhmdfjzjp Electronic Programmer EasyLing Safety and sound-proof enclosure No. 3+3 Vertical columns to support the working units Min. useful working width (mm) 240 Max. useful working width (mm) 3100 Min. useful working tickness (mm) 3 Max. useful working tickness (mm) 150 Distance between center-axes of the disappearing dogs (mm) 800 Adjustable (min/max) feeding speed (m/min) 4 - 24 Total installed power No. 4 Working groups (for each machine's side): Scoring Unit Jumping Scoring Unit 1 x Kw 3 (RPM 6000) Hogging Unit 1 x Kw 6 (RPM 6000) 0-10° Jumping Milling Unit 1 x Kw 6 (RPM 6000) 0°-90° Milling-Shaping unit 1 x Kw 6 (RPM 6000) 0°-90°

Condition: used, Year of construction: 1998, functionality: fully functional, planing height: 250 mm, working width: 410 mm, overall weight: 5,500 kg, Planer REX TIMBERWORK 410x250 mm + 4x chamfers + saw spindle Year of manufacture: 1998 Location: France, Savoie Csdpowmm Aljfx Agzjgp

Condition: used, Year of construction: 2005, functionality: fully functional, REX BIGMASTER 410-K (A+D+FR+FL+AFV4+MVG+2.FR+2.FL+HFRo+HFRu+AZG) REX Georg Schwarzbeck GmbH & Co. KG Year 2005 REX= HEAVY DUTY 4-SIDE PLANING AND MOLDING MACHINE TYPE BIGMASTER 410 - K Machine with exchangeable cutter heads K lower planing shaft A upper planing shaft D Cgedpju Sg T Tsfx Agzop vertical shaft/right side FR vertical shaft/left side FL chamfering device (4 spindles) AFV4 mid feed device MVG 2. vertical shaft/right side /profiling shaft 2.FR 2. vertical shaft/left side /profiling shaft 2.FL upper horizontal molding/profiling shaft HFRo lower horizontal molding/profiling shaft HFRu Heavy type out feed device AZG Machine with constant table height and adjustable upper part (height adjustment by 8 columns)

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Wemhöner VARIOPRESS Vacuum Membrane Press Basic 1000 S Cjdpfx Aev Np H Hegzsgp Technical Specifications: Heating platen size (mm): 2850 x 1550 Electric heating platen design: Aluminum, top heating platen Total pressing force (kN): 2400 Max. chamber pressure (bar): 6 Max. operating temperature: 180 degrees Celsius Max. batch or workpiece size (mm): approx. 2460 x 1180 Thermoplastic film in roll form: Film width: approx. 1430 mm Film thickness (mm): approx. 0.25 - 1 Pressure chamber height (mm): max. up to 180 Connected loads: Installed power (kW): approx. 46 Required air pressure (bar): approx. 8

Condition: like new (used), Year of construction: 2012, Profiling parquet machine for longitudinal side 5+5 motors Speed up to 60 m/min Min. Working width 70 mm (65 mm without bevel) Diamond tools for T&G profile Csdpfxjxwnhbe Agzegp +infeed belt conveyor

Condition: ready for operation (used), Year of construction: 1981, WEINIG Hydromat H25R, S/N 2603-624, year 1981 with walk-in soundproof cabin KASCHWIG - FAST NEW from year 2017 - Short infeed table with heavy 6-roller infeed 1st spindle bottom 11.0 KW Csdjtkt Tpjpfx Agzegp 2nd spindle right 11.0 KW 3. spindle left 11.0 KW 4th spindle top 15.0 KW 5. spindle bottom 11.0 KW 6. spindle bottom 11.0 KW - Hydraulic feed 6-60 m/min. - Feed motor 22.0 KW - 4x driven table rollers - Spindle diameter 50 mm - Automatic table lubrication - Spindle 1 + 4 + 5 + 6 with counter bearing - Spindle 1 + 4 with straight jointer - Feed rollers 170 mm - approx. 10 hydraulic planing heads - Suction box above the machine

Condition: good (used), Year of construction: 1989, functionality: unexamined, working width: 220 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 120 mm, overall weight: 7,500 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 10, power: 105 kW (142.76 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, working height: 120 mm, spindle diameter: 50 mm, Feed rate: 7.5 kW / 8- 40 m/min, Spindle arrangement: 1-bottom (7.5 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-Left (11 kW) Cgjdpfou Udd Sox Agzjp 4-Right (7.5 kW)- with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydraulic clamping 7-Bottom (7.5 kW) - with hydraulic clamping 8-Top (7.5 kW) - with hydraulic clamping and straight jointer 9-bottom (7.5 kW) - with hydraulic clamping and straight jointer 10-Uni (7.5) 6 driven rollers in the table

Condition: like new (used), Weinig Hydromat H22N four-side planer - German production - DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood TECHNICAL PARAMETERS: - planing width 220 mm - planing height 140 mm - spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW Cgsdpfx Aspvi Skjgzjp hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min feed on cardan shafts electric height adjustment pneumatic pressure five pulling rollers in the countertop eight steel upper pulling rollers one upper rubber pulling roller rests on horizontal spindles jointer on the lower spindles Transport dimensions 500x200x160 cm weight 4 tons