Welding machine

LD-Laser GY-W200

Condition: excellent (used), Year of construction: 2016, operating hours: 158 h, functionality: fully functional, machine/vehicle number: GG6TKB-21932, total width: 4,201 mm, total length: 7,151 mm, overall weight: 2,250 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, feed length X-axis: 6,100 mm, feed length Y-axis: 3,355 mm, pressure: 8 bar, cutting length (max.): 6,100 mm, Loading, cutting and break out machine for monolithic glass sheets with less than 158 working hours! Glass thickness automatic detection device enables automatic adjustment of machine parameters. Jumbo sheets: max. 6100x3355 mm, thickness 2–19 mm. Gtjdpfxownww Ne Afneu

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Gtodpjw T Sd Tsfx Afnou Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: excellent (used), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive, graphical user interface (GUI) running on Microsoft Windows XP Professional. Instrument configuration includes the following features: • Magnification range: 5x – 300,000x • Acceleration voltage: 0.3 – 30 kV • Tungsten filament cathode (LaB6 cathode optional) • Large fully motorized sample stage with eccentric tilt capability, including: – Graphic navigation on the sample holder – Easy sample navigation via click-center-zoom – Field-of-view controlled navigation via two navigators – Relative coordinate navigation – Save and recall of sample positions – Adjustable stage field-of-view selection • Field-of-view correction during rotation via computer-driven eccentric rotation • Field-of-view correction during tilting via computer-driven eccentric tilting • Calculation of the possible tilt angle based on sample geometry • Automatic focus tracking when moving the sample in the Z-axis • Intelligent limit switches for all motorized axes • Stage travel: X = 125 mm Y = 100 mm Z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) • Secondary electron detector for high vacuum operation • Newly designed, super-conical objective lens for optimal resolution at high tilt angles • Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV • Simultaneous live imaging with multiple detectors • Powerful image measurement functions • Movie function for recording dynamic processes • Versatile specimen chamber with numerous expansion options: free ports for EDX, WDX, EBSD, cathodoluminescence, etc. • Low-maintenance, quiet pump system consisting of a fore vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control • Comprehensive safety procedures against misuse and external media failure • Ergonomic, height-adjustable system table • SEM starter kit including 2 sample holders, tool kit, and 6 replacement filaments Additional equipment for SEM: • Turbomolecular pump (instead of standard diffusion pump) – Use of a turbomolecular pump eliminates the need for cooling water during SEM operation. Gtodpfx Ajmn Rcqjfnsu Further SEM equipment: • PC for SEM control including TFT monitor • ΟΧ200 Bruker Quantax 200 Extended EDX System – Bruker EDX software will be transferred to new owner upon purchase • Nitrogen-free, energy-dispersive X-ray analysis system including: – SDD detector with 127 eV energy resolution or better – Detection for all elements from boron upwards – Vibration-free, maintenance-free. Peltier cooled (no nitrogen required) – Pulse processor – TFT monitor – Spectrum measurement and element identification – Fully automatic, quantitative, standardless elemental analysis – Image acquisition – Ultra-fast qualitative line scan – Ultra-fast qualitative element mapping – Data management and archiving system – Report generation and results output – Data communication – Installation and user training – HyperMap – Multipoint analysis – Bruker xFlash detector (SDD) with signal processing unit SVE III Scope of delivery: (see photos) Condition: used (Subject to changes and errors in the technical data and specifications!)

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Gsdpfxsgwt S Tj Afnjtu Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Capacity, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radius difference ----- 50/230 Bending speed/repeatability ----- 230º/s. ±0.05 Length of mandrel ----- 1 000-∞ Weight ----- 5000kg Machine dimensions ----- 3.0 x 1.6 x 1.5 Tube rotation ----- 0-360°/sec Length feeding ----- 0-1800 mm/sec Gtsdpfx Aega T E Aofnju Degree of tolerance ----- 0,05°/mm Standard components conform to VDMA, ISO and DIN standards OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with free programmable robot or loading arm * Weld seam detector and tube positioner electromagnetic or optic detection * Free radius bending * Simulation/Collision Control * Bed length extension

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, TAMGLASS / GLASTON HTF ProE – 2448-ADS-R 2400 x 4800 mm, 3 – 19 mm, Right – Left Glass tempering furnace (for Low-E glass) Year: 2006 Noise reduction cabin included Gtedpfx Afextf Dfsnsu 160 kW compressor for 3 mm glass included In good condition.

Condition: reconditioned (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, rotational speed (max.): 6,000 rpm, tank capacity: 1,200 l, SHW Powerspeed 5 Travel paths • X-axis (bed): 10,000 mm • Y-axis (headstock): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rate • X, Y and Z axes: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Feed length: 10,000 mm Coolant system • Container capacity: 1,200 Liter ATTENTION the images are comparison images About us: Gtedpfx Ajv Dhw Tofnju MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drilling and milling machine - used metal milling machine - used metal milling machine - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large part machining - large part machining - large part machining - CNC large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Year of construction: 2021, condition: like new (used), functionality: fully functional, machine/vehicle number: 3815407, WEIGHT 8000KG FEM ISO 1Am M4 Gsdpfxet Nhqye Afnetu KW 2.4/15.5 ( 50 Hz) MAXIMUM CAPACITY 16 TON

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. Gsdpfsl Dw D Eex Afnetu With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. Gjdpfxsfzktzo Afnotu We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.