Used Flail-Mowers for sale (152)

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, mobility: stationary, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Kodpfey Hi D Ssx Aqgodl Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 600 mm, ✅ New & In Stock ✅ Ideal for Tall Grass & Large Meadows ✅ Shipping Available SCHORR FLAIL MOWER RR600HM HIGH GRASS MOWER 8HP 252CC MULCHER - Effortlessly mows tall grass and dense scrub - Powerful 252 cc 4-stroke engine (8 HP) – strong & reliable, even in thick vegetation - 60 cm cutting width – ideal for large areas and tall grass - 32 Y-blades made of hardened steel – efficient mulching of material up to 2.5 cm diameter - Robust 4-speed gearbox – 3 forward & 1 reverse gear for maximum control - Cutting height infinitely adjustable (20–80 mm) – precise results for any terrain - Self-propelled & easy to operate – even on slopes or uneven ground FEATURES / SPECIFICATIONS Whether it’s tall grass, dense brush, or woody growth: this flail mower gets the job done reliably and consistently. The SCHORR RR600HM is built for tough tasks – equipped with a powerful Loncin 4-stroke petrol engine (252 cc) delivering a solid 8 HP. At its core is a 4-speed gearbox (3 forward / 1 reverse), allowing precise control even in demanding ground conditions. With 32 robust Y-blades made from hardened steel mounted on a sturdy rotor, the RR600HM provides uniform and fine mulching. Whether on meadows, orchards, field margins, or fallow land – even branches up to 2.5 cm in diameter are processed with ease. Its 600 mm cutting width enables productive work while maintaining high maneuverability. The cutting height can be adjusted tool-free using the handwheel (20–80 mm), allowing flexible response to terrain and vegetation. The RR600HM is designed for intensive applications – be it overgrown gardens, large green areas, or agricultural environments. The robust construction, deep-tread drive wheels, and self-propulsion ensure confident traction – including on slopes and uneven ground. Up to 6,000 m² can be efficiently and comfortably managed with this flail mower. A professional-grade flail mower for demanding users, farmers, municipalities, or landscape contractors. For those seeking more than just a lawn mower, this machine provides real power at a fair price. Technical Data Manufacturer (abbreviation): SCHORR Manufacturer model: RR600HM Drive type: Self-propelled (3+1 speed gearbox) Blade type: Hammer flail Number of blades: 32 Y-blades Cutting height min. / max.: 20mm / 80mm Ksdpfx Aowtqdmoqgodl Cutting width: 600mm Weight: without packaging: 146kg / with packaging: 180kg Basic Dimensions Overall length: 1790mm Overall width: 730mm Overall height: 1150mm Discharge angle: 360º Engine Air-cooled single-cylinder four-stroke (OHV) engine Displacement: 252cc Max. output: 5.9kW / 8HP Fuel type: Petrol (RON min. 95) Starter: Recoil starter (pull cord) Power transmission: V-belt Spark plug: F7RTC or equivalent Fuel tank capacity: approx. 5L Engine oil capacity: approx. 1.1L Our knowledgeable team is happy to answer any questions you may have about the SCHORR RR600HM Flail Mower for High Grass. You can reach us by phone or email. We look forward to hearing from you and assisting with your inquiry. Find the initial investment for a flail mower too high? No problem, we also have some used machines in stock. Feel free to contact us.

Condition: used, functionality: fully functional, Year of construction: 2025, working width: 600 mm, ✅ Like new & in stock ✅ Ideal for tall grass & large meadows ✅ Shipping available SCHORR FLAIL MOWER RR600HM HEAVY-DUTY BRUSHCUTTER 8HP 252CC MULCHER - Effortlessly cuts tall grass and dense undergrowth - Powerful 252 cm³ 4-stroke engine (8 HP) – robust & reliable even in tough vegetation - 60 cm cutting width – ideal for large areas and tall grass - 32 Y-blades made from hardened steel – efficient shredding of material up to 2.5 cm in diameter - Rugged 4-speed gearbox – 3 forward & 1 reverse gear for maximum control - Adjustable cutting height (20–80 mm) – precise results for any terrain - Self-propelled & easy to operate – also suitable for slopes and uneven ground FEATURES / SPECIFICATIONS Whether tall grass, dense brush, or woody growth: this flail mower completes the job reliably and with endurance. The SCHORR RR600HM is built for challenges – equipped with a robust Loncin 4-stroke petrol engine (252 cm³), delivering a full 8 HP. Ksdpfxewufhce Aqgodl Its core is a 4-speed gearbox (3 forward / 1 reverse gear), allowing precise control even in demanding ground conditions. With 32 robust Y-blades made from hardened steel on a heavy-duty rotor, the RR600HM provides consistent and fine mulching. On meadows, orchards, field edges or fallow land – even tree cuttings of up to 2.5 cm in diameter are processed effortlessly. The 600 mm cutting width allows for efficient work and excellent maneuverability. Cutting height can be adjusted tool-free using a hand wheel (20–80 mm), so you can quickly adapt to any terrain and vegetation. The RR600HM is designed for intensive use – whether it’s overgrown gardens, large grass areas or agricultural settings. The heavy-duty build, coarse-profile traction wheels, and self-propelled drive system guarantee controlled handling – even on slopes and uneven ground. Up to 6,000 m² can be efficiently and comfortably maintained with this flail mower. A professional-grade flail mower for demanding users, farmers, municipalities, or landscapers. For anyone who wants more than just lawn mowing, this is a true powerhouse at a fair price. Technical Data Manufacturer (short): SCHORR Model code: RR600HM Drive type: Self-propelled (3+1 speed gearbox) Blade type: Hammer flails Number of blades: 32 Y-blades Cutting height min. / max.: 20mm / 80mm Cutting width: 600mm Weight: without packaging: 146kg / with packaging: 180kg Basic Dimensions Total length: 1790mm Total width: 730mm Total height: 1150mm Discharge angle: 360º Engine Air-cooled single-cylinder four-stroke engine (OHV) Displacement: 252cc Max. output: 5.9kW / 8HP Fuel type: Petrol (min. RON 95) Starter: Recoil starter (pull cord) Power transmission: V-belt Spark plug: F7RTC or equivalent Fuel tank capacity approx.: 5L Engine oil capacity approx.: 1.1L Our knowledgeable team is happy to assist you with any questions regarding the SCHORR RR600HM Flail Mower. You can reach us by phone or email. We look forward to hearing from you and providing expert advice. Are the acquisition costs for a flail mower too high for you? No problem – we often have used machines in stock. Feel free to contact us.

Condition: used, color: red, Year of construction: 2000, Bos edge trimmer    • PTO driven Kdedpfx Aqjy R Upuegsl    • Three-point linkage    • PTO shaft included Condition: Used Year of manufacture: 2000

Condition: new, functionality: fully functional, Year of construction: 2024, working width: 73,000 mm, color: green, machine/vehicle number: S241645, Equipment: hydraulic folding, lighting, SPEARHEAD 730 STUBBLEMASTER Trailed Rotary Mower If you need to work more hectares, opt for a machine with a 7.3-meter working width. The 730 features the same special design as the 500, complete with a powerful 165 hp (123 kW) transmission. Kdjdpfsxlf N Sjx Aqgol Larger farmers and contractors appreciate the five rotors. Each rotor is equipped with three straight and three angled blades, delivering the renowned double cut of the Stubble Master. This accelerates residue breakdown and improves soil structure. The monocoque deck design prevents dirt buildup, while the adjustable cutting height allows mowing just a few centimeters above the ground. Five rotors cover 7.3 meters in a single pass. Easy to clean thanks to the monocoque design. Precisely set your cutting height for maximum performance.

Condition: used, color: orange, Year of construction: 2016, Working width: 190 cm Kdedpoy Efttsfx Aqgol

Condition: like new (used), functionality: fully functional, machine/vehicle number: 2505427, Year of construction: 2025, working width: 132 mm, overall weight: 355 kg, power take-off speed (min.): 540 rpm, power take-off speed (max.): 540 rpm, power take-off power (min.): 20 kW (27.19 HP), operating hours: 7 h, We are offering this as-new Jansen flail mower EFGCH-135, hammer flail type, year of manufacture 2025. Manufacturer: Jansen Model: Flail Mower EFGCH-135 Year of manufacture: 2025 Condition: As new Category ID: 2456 Type ID: 4181 Type: Hammer flail mower Kdedpfsy Rq D Uox Aqgsl If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Riding Lawn Mower ETESIA Type Hydro 124 D Year of manufacture: 2003 Power: 15.5 kW Cutting width: 1240 mm Grass catcher: 600 liters = over 100 kg of grass Turning radius: 1250 mm Travel and working speed: max. 16 km/h 3-cylinder Lombardini FOCS 903 diesel engine Displacement: 916 cm³ Power: 22 HP at 3600 rpm - Water-cooled - Two counter-rotating blades, 65 cm long with a 6 cm overlap - The powerful suction lifts the grass upright before cutting - Central rear discharge - Hydraulic high-tip emptying, controlled from the driver's seat via toggle switch - Electric cutting height adjustment from 44 to 140 mm - Hydrostatic drive with rear-wheel drive via hydraulic motors Kdodpfoy Ai Ntex Aqgsl - Hydraulic differential lock - Hydraulic power steering - Twin hydraulic connections for operation of front-mounted attachments - Adjustable steering column - Hour meter: 1,539 operating hours Overall width: 1,280 mm Length: 2,800 mm Weight: 716 kg Good condition

Year of construction: 2008, condition: good (used), fuel type: diesel, JOHN DEERE 1515 Lawn Mower Yanmar Diesel 4x4 Park Mower / Air Conditioning 2008 Video can be sent via Whatsapp. Continuous stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a variable inventory of machines, trucks, trailers and attachments. All our deliveries are at trade prices in AS-IS condition, without warranties. (see our general terms and conditions) For a viewing and/or test drive you can make a non-binding appointment. Please call in advance as we are not constantly present. Van de Wert Trading B.V. Kdsdpfoy A I T Dox Aqgel Bedrijfsstraat 3 5391 LR Nuland

Condition: new, working width: 1,250 mm, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. slew ring / incl. floating mounting / NEW unit / in stock & immediately available Price: €17,890.00 net / €21,289.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg without accessories - Mulches grass and light brush up to 7 cm in diameter - Suitable for excavators from 5 to 15 tonnes - Universal interface for mounting various adapter plates - S420: double-walled housing made from high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low-profile design - Indirect V-belt drive with 4 belts - Drive designed for hydraulic motors depending on carrier's oil flow - 4D ROLLER: reinforced support roller 152 mm Ø, with double-taper roller bearings, height adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front chain guard - Rear rubber protection - Colour: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pcs, part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29–58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow rate in l/min (min-max): 55 – 150 OPT 099 Floating Mount (parallelogram linkage) OPT 555 Oscillating Adapter OPT 372 Hydraulic 190° Rotary Device Three hydraulic lines are required: supply, return, and leakage oil. Optional: MS08 adapter plate incl. bolts and installation = €880.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all immediately available! Mr. Herden (phone) will be happy to assist you. We are also happy to provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telescopic handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco With over 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Subject to errors and prior sale! = Further information = Kjdpfxey E Etyo Aqgodl Please contact Marius Herden for more information.

Condition: new, working width: 2,300 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Greentec RM 232 Hedge Mulcher / incl. MS08 Adapter Plate / NEW machine / in stock & immediately available Price: €14,590.00 net / €17,362.10 gross - Working width: 2,300 mm - Number of rotors: 4 units - Number of blades per rotor: 6 - Max. branch diameter: 4 cm Kdsdpfx Aey E Ettjqgel - Working speed up to: 4 km/h - Required oil connections: 1 x double acting + 1 x free return (leakage oil) - Minimum oil flow: 50 l/min at 180 bar - Weight: 310 kg Delivery without hydraulic hoses and oil flow divider! Key advantages: - High capacity – Efficient maintenance of large hedgerows - Unique cutting system – Cuts and mulches branches in a single process - Very long lifespan – Built with high-strength steel components The RM 232 branch cutter is designed for professional use by municipalities, farmers, and contractors. The machine stands out with its large working width and high operating speed, ensuring impressive capacity. Branches are cut and shredded in one pass. The processed material is gently deposited beneath the unit, initiating natural decomposition. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse offers a wide range of various Greentec products, all available for immediate delivery! Mr. Herden (phone ...) is at your service. On request, we are happy to provide you with a financing offer. We are official distribution and service partners for Westtech, OilQuick, Holp, Magni Telehandlers, DMS, Gierking GMT, Weber MT, Seppi M., JCB Construction Equipment, Mercedes-Benz, and Iveco. Additionally, with over 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We can supply the complete Seppi M. product range for you! Subject to errors and prior sale. = Further Information = Please contact Marius Herden for more details.

Condition: new, working width: 105,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H3 105 Mulcher / NEW / in stock & immediately available Price: €6,490.00 net / €7,723.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulcher head for mounting on a hydraulic arm - Suitable for mulching grass and brush up to 3 cm Ø - For excavators from 2 to 5 tons - Suitable for mounting on various adapter plates - Floating mounting (parallelogram guide) - Indirect V-belt drive with 3 belts - Drive designed for hydraulic motor depending on the carrier’s oil flow rate - Housing made of wear-resistant AR400 steel - Front guard with chains - Rear guard made of rubber - Reinforced support roller with double taper roller bearing, height-adjustable - Colour: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flails (standard) - 9 units, part no. 150.02.041 OPT 429 Hydraulic gear motor 17cm³ - With flow control valve and DRAIN SAFE TM motor safety valve to protect the motor in case of incorrect use - Required hydraulic pressure (min-max): 150 - 250 bar - Required hydraulic oil flow (min-max): 35 - 60 l/min Optional: MS03 adapter plate including bolts and installation = €530.00 net Three hydraulic lines required: feed, return, and drain. The device is supplied without hoses or fittings. Many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a large range of Seppi M. products in stock and available for immediate delivery. Mr. Herden (phone) will be happy to assist you. On request, we will be happy to offer you a financing option. We are an official sales and service partner for the following brands: - Westtech - OilQuick - Holp - Magni Telehandlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB Construction Equipment - Mercedes-Benz - Iveco Kedsyix Hmepfx Aqgodl Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further Information = Contact Marius Herden for more information.

Condition: new, working width: 125,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mower / incl. floating linkage / NEW unit / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross - Working width: 125 cm - Total width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg - Mulches grass and light brush up to 7 cm Ø - For excavators from 5 to 15 tonnes - Universal mounting interface for installing various adapter plates - S420: double-walled housing made of high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low design - Indirect V-belt drive with 4 V-belts - Drive designed for hydraulic motor depending on the carrier’s hydraulic flow - 4D ROLLER: reinforced support roller, 152 mm in diameter, with double-cone roller bearings, height-adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front guard with chains - Rear guard made of rubber - Color: red RAL3020 · anthracite RAL7021 Ksdpfxjyix Has Aqgodl OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pieces, part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow in l/min (min-max): 55 – 150 OPT 099 Floating mounting (parallelogram linkage) OPT 555 Oscillating adapter Three hydraulic lines are required: pressure, return, and drain/oil leakage. Option: MS08 adapter plate incl. bolts and installation = €750.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse offers a very large selection of various Seppi M. products, all available immediately! Mr. Herden (phone) will be happy to assist you. We can also provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telescopic handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. product range! Errors and prior sale excepted. = Further information = Please contact Marius Herden for more information.

Condition: used, Year of construction: 2021, operating hours: 729 h, 2021 | FAE PT475 Forestry Mower / Tracked Carrier with Mulcher | Used Forestry Mower | 729 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 470000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 64 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is in very good condition, but the Linguet on the winch hook is missing. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38548 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Kodsx Uyfiepfx Aqgjdl 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2024, working width: 85,000 mm, For inquiries regarding the attachment, please contact Mr. Herden (by phone) for assistance. Seppi M. H3 085 / Flail Mower / Mulcher / incl. MS03 / DEMO unit / in stock & immediately available / Excellent condition! Price: €7,040.00 net / €8,377.60 gross This mulcher has only been used briefly, for a single job! - Working width: 85 cm - Overall width: 97 cm - Depth: 80 cm - Height: 66 cm - Weight: 181 kg Equipment: - incl. MS03 adapter plate - Mulching head for attachment on a hydraulic arm - Mulches grass and brush up to 3 cm diameter - Suitable for excavators from 2 to 5 tons - For mounting on various adapter plates - Float mounting (parallelogram linkage) - Indirect V-belt drive with 3 V-belts - Drive designed for hydraulic motor depending on the carrier unit’s oil flow - Housing made from wear-resistant AR400 steel - Front protection with chains - Rear protection made of rubber - Reinforced support roller with double-taper roller bearings, height-adjustable - Colour: red RAL3020, anthracite RAL7021 OPT 039 Rotor with SMW flails (standard) - 9 pcs, part no. 150.02.041 OPT 428 Hydraulic gear motor 11cc - With flow control valve and DRAIN SAFE TM motor safety valve protects the motor in case of misuse - Required hydraulic pressure in bar (min-max): 150 – 250 - Required hydraulic oil flow in l/min (min-max): 20 – 50 OPT 529 DRAINLESS system with pressure accumulator (NO case drain line required!!) - Including hoses and check valve 2 hydraulic lines are required: supply and return. No case drain! The unit is delivered without hoses or connectors. We have many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We offer a large inventory of various Seppi M. products in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. Financing available upon request. Kjdpfx Ajyklntsqgodl We are an official sales and service partner for: - Seppi M. - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Magni Telehandlers - JCB Construction Equipment - Mercedes-Benz - Iveco Additionally, with 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range! Subject to errors and prior sale! Internal ref. no.: 520013 = Further information = Please contact Marius Herden for further details.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 167 h, Equipment: ABS, all wheel drive, Authorized SUBARU dealer offers for sale a professional remote-controlled mower designed for mowing challenging areas, such as embankments, slopes, or maintaining roadside verges. It is also ideally suited for private use. Kedpfxjvv Hi Eo Aqgedl Thanks to its low weight and compact dimensions, it fits easily into a standard van or a small trailer. This is professional-grade equipment – durable and robust. We offer all forms of payment: Leasing, financing, cash, or bank transfer. When paying by cash or bank transfer, you can immediately drive the equipment out of the showroom. The machine is ideal for mowing: - Steep slopes and embankments - Drainage ditches - Roadside verges - Park and municipal areas - Hard-to-reach and hazardous locations for operators Technical data: - Engine: Briggs & Stratton 950 Series (223 cc, approx. 6 HP) - Drive: Hydrostatic 4x4 - Control: Radio remote controller (remote-controlled) - Cutting width: 56 cm - Cutting height: adjustable, approx. 40–90 mm - Travel speed: up to approx. 4 km/h - Weight: approx. 125 kg - Fuel: Gasoline - Cutting system: Mulching blade Technical condition: The machine is fully operational / ready for work (you can specify: e.g., after service, new parts, oil change, etc.). Regularly maintained, used for municipal work. Benefits: - Safe operation on steep slopes - Remote control from a large distance - High stability and low risk of overturning - Compact size for easy transport - Proven industrial-grade construction The listed price is net and applies to export and companies. For private customers, a significant discount is possible – we encourage you to contact us directly by phone for your best price :) _____ Additionally, we have for sale a more affordable mower, also remote-controlled, with an extra snow plough attachment. BRAND NEW – see last photos in the listing. Price: 15,999 PLN net + 23% VAT. Technical data: - Dimensions: 1130x1000x600 mm - Plough dimensions: 100x310 mm - Machine weight: 155 kg - Cutting width: 500 mm - Cutting height: 20–150 mm - Travel speed: 3 km/h - Engine: RATO225 - Fuel tank capacity: 1.2 l _____ _____ After price negotiations, for serious buyers we are able to record a detailed video, perform a computerized test, or measure paint thickness to enable safe remote purchase of the machine. _____ Of course, we highly encourage visits for inspection, but where this is not possible, such forms of purchase will be available, ensuring a safe transaction. _____

Condition: good (used), functionality: fully functional, Möller Hacker / impact shredder / secondary shredder. Infeed width 835 mm. Infeed opening 310 mm. Kjdpfxexl Uiuo Aqgjdl Rotor diameter 500 mm. 72 hammers. Screen perforation 16 mm. Drive motor 30 kW. Hopper with angled feed or top feed. Insensitive to foreign objects. Ideal for waste in sawmill basements.

Condition: new, functionality: fully functional, Year of construction: 2022, working width: 5,000 mm, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2,100 kg. Driven via a PTO shaft with 540 rpm. - Maximum horizontal reach: 5.00 m - Independent hydraulic system (46 l/min, 210 bar) - Drive shaft - Hydraulic collision protection - Hydraulic swing arm - Float position for swing arm - Float position for mowing rotor - Stabilization kit for three-point linkage - Bowden cable control Flail rotor 1000 - Central mounting - Direct drive Ksdjxlf Hwepfx Aqgedl - Working width: 1.00 m - Weight approx. 140 kg

Condition: good (used), Lifting pulley, pulley, rope pulley, steel rope pulley, rope pulley, rope pulley block, hydraulic lifting pulley Kdsdpfxev Iycie Aqgsl -Mower lift: Lifting roller with hydraulic cylinder -Hydraulic cylinder: Bosch stroke 190 mm -Number: 2x mower lifts available -Price: per piece -Transport dimensions: 480/130/H67 mm -Total weight: 6.1 kg/piece

Condition: new, Working width: 185 cm Kdedpfx Aeyaul Tsqgel

Condition: new, Year of construction: 2023, Watering arm / irrigating boom    • Integrated tractor bumper    • Cat 2 three-point linkage    • Approx. 6 metre reach    • 2" galvanised piping Kdsdpsx S Sa Hsfx Aqgel    • Hose and spray head with Storz coupling    • Double-acting hydraulic cylinders    • Heavy-duty slewing ring    • Mechanically rotatable in 5 positions    • Available from stock! Condition: New Year of manufacture: 2023

Condition: new, color: yellow, Working width: 12.500 cm Kdodpfx Ajx I Hgysqgsl

Condition: new, functionality: fully functional, ✅ New stock ✅ Immediately available ✅ Shipping possible The SCHORR Disc Mower RR580KRM is a powerful high-grass mower, designed to cut through dense, tall grass and brush with ease. With a working width of 58 cm, it allows you to quickly maintain meadows, roadsides, and orchards. The disc mowing system features four freely swinging blades, ensuring an even and high-quality cut. The swath deposit with a removable swath cloth enables clean handling of cut material without mulching. The RR580KRM is self-propelled and easy to operate—even on slopes or uneven terrain. Its wheel freewheel system allows for agile maneuvering, and mowing drive and wheel drive can be engaged separately. Applications: • Orchard meadows & grassland with tall vegetation • Roadsides, embankments, ditches, and fence lines • Fallow ground, border strips around farmyards, riding arenas, or storage areas Even on slopes of up to approx. 30%, the disc mower stays on track and provides a consistently high-quality cut. The swiveling, ball-bearing glide disc and flexible V-belt drive ensure smooth, low-vibration operation and reduced maintenance requirements. Kdsdoxvb Ryspfx Aqgel Ergonomics & Transport: The handlebar is height-adjustable and foldable, ensuring comfortable operation and space-saving storage. Weighing around 65 kg, the RR580KRM combines a sturdy build with agile handling. Technical Data: Manufacturer: SCHORR Model: RR580KRM Engine: Air-cooled, single-cylinder four-stroke, 6 HP Drive: Self-propelled Blade type: Freely swinging blades, 4 pieces Weight: 65 kg Dimensions: Length 1070 mm, Width 570 mm, Height 840 mm Cutting height: approx. 30 mm Cutting width: 580 mm Spare parts are always available and our service team is ready to assist with any inquiries. Delivery or collection in 48465 Schüttorf is possible, collections strictly by prior arrangement. Financing or leasing options are also available – our team will be happy to advise you on the different options. The RR580KRM is immediately available, robust, agile, and ideal for both professionals and private users.

Condition: new, functionality: fully functional, SCHORR Rotary Mower RR580KRM - Type: High grass mower/rotary mower - Working width: 58 cm for efficient mowing of meadows, roadsides, and orchard areas - Cutting system: 4 freely swinging blades, ideal for tall, dense grass - Swath deposit: Removable swath cloth for a clean cut with no mulching - Function: Self-propelled, easy to operate – suitable even on slopes and uneven ground - Maneuverability: Wheel freewheel for easy turning, separate engagement of mowing and drive - Availability: NEW & AVAILABLE IMMEDIATELY! Applications The RR580KRM is excellent for overgrown areas, orchard meadows, and roadsides. Its 58 cm working width enables fast mowing with neat depositing of the cut material – perfect for later hay or green forage processing. Rotary mower system The centerpiece of the mower is the ball-bearing glide disk with four movable blades. This robust system reliably handles varying grass heights and obstacles for a uniform cutting result. The cutting height of approx. 30 mm protects insects and young plants. Drive & Handling The wheel drive can be engaged as needed for optimal working speed. Freewheeling wheels reduce effort when cornering, making maneuvering easier. Grippy tractor-profile tires provide maximum traction on diverse surfaces. Typical Uses - Orchard meadows and tall grassland - Roadsides, embankments, and fence lines - Fallow land and boundary strips around farms, equestrian arenas, or storage areas Ergonomics and Transport The height-adjustable and foldable handlebar ensures ergonomic operation and compact storage. Weighing approximately 65 kg, the RR580KRM remains stable yet agile on uneven terrain. Technical Specifications - Manufacturer: SCHORR - Model: RR580KRM - Engine: Air-cooled 1-cylinder four-stroke engine with 6 HP - Drive: Self-propelled - Blade type: Freely swinging blades - Number of blades: 4 - Dead weight: 65 kg Kdjdpew Sntbofx Aqgel Dimensions - Overall length: 1070 mm - Overall width: 570 mm - Overall height: 840 mm - Cutting height: approx. 30 mm - Cutting width: 580 mm We always have spare parts in stock and our service team is happy to assist with any questions. Whether delivery or pickup in 48465 Schüttorf – we have the right solution. Please contact us to schedule pickups. Would you like to finance or lease? Talk to us – we offer attractive options. Our team looks forward to advising you!

Condition: good (used), For lawn tractors, ride-on mowers, lawn mowers, lawn tractors, mower decks, lawn mowers, cutter bars, disc mowers -Lawnmower blades: 48 pieces Types: different -Package: complete -Price: complete Kdjdpfxob A R Uhe Aqgel -Weight: 120 kg