Injection molding machine

KraussMaffei KM 2300 - 12000 MC

Year of construction: 2003, condition: ready for operation (used), A total of seven injection molding machines Arburg are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, injection volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, plate distance: 750mm, plate dimensions X/Y: 570mm/570mm, tie bar distance: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, plate distance: 350mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, injection volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, injection volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, plate distance: 550mm, plate dimensions X/Y: 446mm/446mm, tie bar distance: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, injection volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, plate distance: 425mm, plate dimensions X/Y: 400mm/400mm, tie bar distance: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Lsdpfotyyn Hsx Aa Ejak

Condition: used, Year of construction: 2004, Technical details: screw size: 105 mm injection shot weight in Polysterol: 4727 g/PS closing pressure: 2300 kN plate size: 2830 x 2400 mm opening stroke: 3700 mm daylight: 1100-1800 mm injection volume: 5195 ccm injection pressure max.: 2296 bar dimensions: 14,2 x 4,15 x 2,84 mm total wight: 143 t tie bars distance: 2000 x 1600 mm Robot system core pulls hot runner controller Lasdpfjtrbcbjx Aa Esk -     The machine is in a very good condition       -     Additionally complete cutters available. -     A conveyor belt and Robot Systems(Model 2012) *

Condition: excellent (used), Angel Victory 1350/220 Tech Closing 220 tons year 2004 Clamping plan WxH Laedpfxspdrpzj Aa Ejk 860x830 Scrow 55mm 618 cm3 Cc 200 Minimum mold height 250mm Maximum 730mm

Condition: good (used), Year of construction: 2000, operating hours: 83,000 h, clamping force: 350 kN, screw diameter: 25 mm, For sale is an injection molding machine of the Marker Arburg and the type 320S 350-60 Year of construction: 2000 Operating hours automatic: 83000 Screw diameter: 25 mm Ledpfxehhuq Aj Aa Esak Clamping force: 350 kN Barrel length: 60 On request, transport can be organized throughout Europe for an additional charge. Price incl. VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Lajdpjrthkuefx Aa Ejk Screw diameter: 35 mm Injection volume: 230 cm3 Shot weight: 127 g New temperature control board ARB 777 (cost 2.750€)

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Lasdpfsvgu D Sex Aa Eek Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: TET351P5-offAD-Bypass - 2200373733, cooling capacity: 66 kW (89.73 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,082 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -5 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 11.2 m³/h, pump pressure: 4.68 bar, total width: 866 mm, total length: 2,250 mm, total height: 2,054 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller, Type: TAEevo Tech 351 P5-offAD-Bypass MTA S.p.A. Chiller, water chiller; cooler TAEevo Tech 351 P5-offAD-Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Special features: - Open fill system / attached tank - Bypass with manual valve between water inlet and outlet Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 39 Laodpfx Ajwlt Raea Ejk Max. current (A): 68 Start-up current circuit (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial no.: 2200373733 Year of manufacture: 2021 Condition: Visual 2, Technical OK used (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have visual imperfections due to their usage. (Subject to technical changes and prior sale!)

Condition: used, Year of construction: 2008, clamping force: 160 kN, displacement volume: 251 cm³, injection pressure: 2,500 bar, overall weight: 8,200 kg, load hours: 37,200 h, screw conveyor diameter: 40 mm, terms of delivery: FCA Pegnitz Laodpfxjwd Udlj Aa Ejk delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2003, operating hours: 67,092 h, BATTENFELD HM 10000-9200 Manufacturer: BATTENFELD Type: HM 10000-9200 Control system: UNILOG B4 Year of construction: 2003 Operating hours: 67092 h Technical data closing side Clamping force: 10000 kN Tie bar dimensions h x v: 1120 x 1400 mm Panel size h x v: 1960 x 1690 mm Installation height min.: 550 mm Installation height max.: 1020 mm Panel distance max.: 2120 mm Opening stroke: 1100 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering movable plate D: 250 mm Centering of fixed plate D: 315 mm Technical data injection side Screw diameter: 120 mm Stroke volume: 5655 ccm Injection pressure: 1632 bar Screw length: 22 l/d Screw stroke: 500 mm Screw speed: 130 min Screw torque: 11370 N Plasticizing flow: 144 g/s PS Injection flow into the atmosphere: 1144 g/s PS Number of heating zones: 8 Nozzle path: 700 mm Dimensions & weight Machine dimensions LxWxH: 11.6m x 2.9m x 2.5m Total weight: 76500KG Equipment On-screen text German Compact flash drive Hydraulic core pull 4x Leveling elements EUROMAP 12 interface Interface for temperature control unit Laodpfxerdyq Ro Aa Eek Enlarged oil cooler mold heating 16x

Condition: reconditioned (used), Year of construction: 2002, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 5000 - distance between columns (h x v): mm 900 x 800 - distance of mold opening max: mm 1170 - mold installation height min: mm 480 - opening stroke of the clamping platen: mm 1650 - Ejector stroke: mm 250 Ljdponh Rnuofx Aa Esak - Ejector force: kN 95 ( Backward: 48 ) SCREW UNIT - Screw diameter: mm 90 - Ratio Ls/D: 20 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection size for PS: g 1777 - Injection capacity: cm3/s 649 - Closing force of the nozzle: kN 115 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 44 WEIGHT AND DIMENSIONS - net weight: t 25,8 - dimensions of the machine (L x W x H): m 7,65 x 2,33 x 2,55 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!