Injection molding machine
KraussMaffei KM 160-750 CX

Name: KraussMaffei KM 160-750 CX
Brand: KraussMaffei
Availability: InStock

Year of construction

2025

Condition

New

Location

Wrocław

Injection molding machine KraussMaffei KM 160-750 CX

Show map

Machine data

Machine type:: Injection molding machine

Manufacturer:: KraussMaffei

Model:: KM 160-750 CX

Year of construction:: 2025

Condition:: new

Price & Location

Location:: Kwiatkowskiego 5a, 52-407 Wrocław, Polska

Call

Details about the offer

Listing ID:: A20025215

Update:: 18.09.2025

Description

Injection Moulding Machine – Krauss Maffei KM 160-750 CX
Year of manufacture: 2025

Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" operator panel with colour touchscreen display.

Plasticising Unit

Complete plasticising unit for thermoplastics, screw diameter 50 mm, with check valve and open nozzle
Nozzle radius: 10 mm
Nozzle orifice: 4 mm

Technical data (standard version)

Clamping Unit

Clamping force: 1,600 kN
Opening force: 86 kN
Platen dimensions (H x V): 820 x 845 mm
Tie bar spacing (H x V): 520 x 520 mm
Opening stroke: 650 mm
Minimum mould height: 300 mm
Maximum daylight: 950 mm
Ejector stroke: 150 mm
Ejector force front/rear: 23 / 10 kN

Injection Unit

Screw diameter: 50 mm
L/D ratio: 20.2
Injection pressure: 1,892 bar
Shot volume: 393 cm³
Shot weight (PS): 357 g
Injection speed: 90 mm/s
Injection rate (standard): 177 cm³/s
Screw speed (standard): 265 rpm

Electro-hydraulic System

Pump motor power: 22 kW
Installed heater power: 15.5 kW
Dry cycle time according to Euromap 6: 2.1 s
Hnodsxdd N Ujpfx Afnjh
Oil tank capacity: 400 l

Linear Robot – Krauss-Maffei LRX 100

Payload < 10 kg (gripper + drives + parts)
Part removal on operator-offside
Axes:
X-axis (from mould): 620 mm, servomotor
Y-axis (vertical, with brake): 1,200 mm, servomotor
Z-axis (crosswise): 1,500 mm, servomotor

Dimensions and Weight

Net weight (with control cabinet): 6.10 t
Machine dimensions (L x W x H): 4.93 x 1.62 x 2.04 m

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2019

98 listings online

Call

Send inquiry

Telephone & Fax

+48 71 70... show

These listings may also fit your interest.

Listing

Injection moulding machines up to 5000 KN KraussMaffei Krauss Maffei KM160-750CX, 2008

Pegnitz

1,423 km

Injection moulding machines up to 5000 KN
KraussMaffeiKrauss Maffei KM160-750CX, 2008

Call

Listing

Eccentric press Fresan FP 100P Eccentric Press

Küçükbalıklı

3,152 km

Eccentric press
FresanFP 100P Eccentric Press

Call

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.15, Fresan FP 100P - C Frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Power: 100 tons (1000kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 445 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil Hnsdpenxh T Rofx Afnjh * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine

See details

Listing

Injection moulding machine KraussMaffei KM 160 - 750 CX

Eschweiler

1,032 km

Injection moulding machine
KraussMaffeiKM 160 - 750 CX

Call

Condition: ready for operation (used), Year of construction: 2006, operating hours: 58,670 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, displacement volume: 318 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Hodpfx Afjydp Idononh Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 45 mm Ls/D ratio 22,4 Injection pressure 2336 bar Stroke volume 318 ccm Shot weight (PS) 289 gr. Injection rate 143 ccm/s Screw speed 265 1/min Plasticising rate max. 29,3 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Dimensions of the machine ca. 5,00 x 2,00 x 2,20 m Total machine weight 6600 kg Max. mould weight 1862 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 - 90 ° Additional Options: - 1 x Air valve - 2 x hydr. core pulls - 6 x hotrunner controller - Robot interface according to Euromap 67

See details

Listing

Eschweiler

1,032 km

Injection moulding machine
KraussMaffeiKM 160 - 750 CX

Call

Condition: ready for operation (used), Year of construction: 2006, operating hours: 68,590 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 50 mm Ls/D ratio 20 Injection pressure 1892 bar Stroke volume 393 ccm Shot weight (PS) 358 gr. Injection rate 177 ccm/s Screw speed 265 1/min Plasticising rate max. 36,2 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Dimensions of the machine ca. 5,50 x 2,00 x 2,20 m Total machine weight 6600 kg Max. mould weight 1862 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR100 X: 550 mm Y: 1200 mm Z: 2500 mm C: 0 - 90° Additional Options: Hnsdoydp D Espfx Afneh - 1 x Air valve - 2 x core pull - Robot interface according to Euromap 67

See details

Listing

Camshaft Grinding Machine JUNKER JUCAM 6XS /12

Nürnberg

1,406 km

Camshaft Grinding Machine
JUNKERJUCAM 6XS /12

Call

Condition: used, Year of construction: 2014, workpiece length 100 mm swing diameter 80 mm number of spindles 2 Control FANUC 31i-B5 workpiece weight 2,00 kg centre height 170 mm grinding wheel diameter 100 mm Hnodevx Uvfopfx Afneh grinding wheel hole diameter 32 grinding wheel width max. 20 peripheral speed max. 125 m/sec passage of steadyrest 45 - 60 mm total power requirement 75,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control; loading/unloading unit, CO2 extinguishing system; for CBN grinding wheel; tailstock; steady; diamond wheel dresser mounted on the dressing spindle; Wheelhead variant 12 (two grinding spindles can be moved separately).

See details

Listing

Wrocław

1,728 km

Injection molding machine
KraussMaffeiKM 160–750 CX

Call

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Hnodpfox Thzpox Afnsh Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated operator panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Check valve, open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mold opening force: 86.4 kN Movable platen force: - opening: 44.8 kN - closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mold opening stroke: 650 mm Mold height (min.): 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Shot volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard/option): 390 / 490 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater capacity: 10.97 kW Number of barrel heating zones: 5 Dry cycle rate (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

See details

Listing

Wrocław

1,728 km

Injection molding machine
KraussMaffeiKM 160-750 CX

Call

Condition: excellent (used), Year of construction: 2007, Krauss Maffei Injection Moulding Machine KM 110–750 CX Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and 3 USB ports. Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1,100 kN Mold opening force: 70 kN Moving platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (H × V): 745 × 770 mm Tie bar spacing (H × V): 470 × 470 mm Mold opening stroke: 600 mm Mold height (installation): 300 mm Platen opening travel: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2,500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater power: 15.62 kW Number of cylinder heating zones: 5 Dry cycle rate (Euromap): 2,000 cycles/h Oil tank capacity: 489 l Hsdjx Avhyspfx Afnonh Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

See details

Listing

Burgdorf

1,226 km

Disk laser
TRUMPFTruDisk 5001 (6C)

Call

Condition: like new (used), Year of construction: 2017, TRUMPF TruDisk 5001 (6C) Hnodoqfguaopfx Afnoh * MFD 2017, as-new condition * laser power: 5 kW * wavelength: 1030 nm * beam quality: 4 mm mrad * beam switch for 4 fiber exits, min. fiber diameter: 100 µm * fiber connector: LLK-D * option: field bus interface & IIO3-card * 2 identical lasers available

See details

Listing