Injection Molding Machine

KraussMaffei CX250-1000

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm Kwedpfx Aaoyhbq Esljw • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold • Cooling: 4 x HB 100

Condition: reconditioned (used), Year of construction: 2015, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 5000 - distance between columns (h x v): mm 900 x 800 - distance of mold opening max: mm 1170 - mold installation height min: mm 480 - opening stroke of the clamping platen: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95 ( Backward: 48 ) SCREW UNIT - Screw diameter: mm 90 - Ratio Ls/D: 20 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection size for PS: g 1777 - Injection capacity: cm3/s 649 - Closing force of the nozzle: kN 115 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 44 WEIGHT AND DIMENSIONS - net weight: t 25,8 - dimensions of the machine (L x W x H): m 7,65 x 2,33 x 2,55 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: Kwodpfenh Rnuox Aaljw - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, Here, as a specialist dealer in injection moulding machines, we offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines currently in use. Year of manufacture: 2010. We have been wholesalers of used injection moulding machines for over 25 years. Current tax notice – Advantage for buying used machines: From 01/07/2025, used machines will also qualify for special tax depreciation of 30% per annum. In addition to the lower price compared to new machines, you can claim the same depreciation amounts as for a new machine. Keyword: growth booster (§ 7 paragraph 2 EStG-E). Currently in stock at our Hannover warehouse and tested. Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP thermoplastics Extras: 2 additional robots: Linear robots LRX 100 and LRX 50 can also be purchased separately - 2 x core pull (movable and fixed WAP) - Pneumatic valve 1 on fixed WAP - Accumulator for increased injection performance - Rapid SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement Kwodpfx Aexqhuusalew - Mould approach control - Cycle time analysis - External USB keyboard - Graphic analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on moving WAP for blowing out - 12 temperature control zones - Potential-free BDE contact - Process monitoring - Cycle storage - Trend graphic – target/actual diagram - PV control - Active back pressure control - Single-owner machine – sourced in Germany Regular maintenance by manufacturer and previous owner Clamping Unit Clamping force: 2500 kN / 250 t Tie bar distance: 630 x 630 mm Platen size: 995 x 1050 mm Max. opening stroke: 820 mm Min. mould height: 330 mm Max. opening: 1150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection Unit Screw diameter: 50 mm Injection volume: 432 ccm Shot weight: 393 g / PS Injection pressure: 2304 bar Robot LRX S50 - 3 gripper circuits – 4 vacuum circuits Robot LRX 100 - 1 gripper circuit – 4 vacuum circuits Electrical Equipment Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation and software manual Available immediately ex our Hannover warehouse or delivered to your location (delivery at cost). The machine is functionally tested and in our sole ownership. The requested machine is immediately available from our Hannover warehouse, functionally tested, and can be inspected under power. About our machines and company: – We only sell machines owned by us, purchased from ongoing production, from our Hannover warehouse – All machines are inspected and tested before disassembly – We do NOT sell insolvency stock – we are NOT brokers dealing with third-party property – All machines come from successful companies where maintenance and care are taken as a matter of course – All listed machines are available for viewing in our warehouse

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, overall weight: 1,700 kg, fuel type: diesel, tank capacity: 180 l, color: white, output current: 435 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 110 kW (149.56 HP), continuous power: 100 kW (135.96 HP), total length: 2,750 mm, total width: 1,100 mm, total height: 1,450 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Ricardo, Cummins, type of cooling: water, type of input current: three-phase, Three-phase stationary generator Proton ZPP 100 (100kW - 110kW) in a compact housing resistant to precipitation and additionally soundproofed. The aggregate has an external automatic reserve switching system SZR (Autostart) and many other functions as specified later in the description. - Model - Proton ZPP 100R SZR - Maximum power - 110 kW / 140 kVA - Rated power - 100 kW / 125 kVA - Prepared for operation - Yes (Flooded with fluids, test run) - Type - Industrial genset - Condition of the aggregate - Factory new - Manufacturer - Proton - Generator type - Three-phase - VAT invoice 23% - Year of production - 2024 - Warranty - 36 months ⊳ ENGINE: Engine model - Ricardo R6105AZLDS Fuel type - Diesel (Diesel) Combustion: - 22.0 liters per hour (at 75% of maximum power) - 14.5 liters per hour (at 50% of maximum power) Engine configuration - In-line (R4) Displacement - 7000 cc3 Direct injection Lubrication method - Forced, engine with oil pump ⊳ ENGINE: 100% Copper AVR voltage stabilizer - Yes Alternator model - Proton 274D 400V rated power - 100000 watts (100kW / 125kVA) 400V maximum power (up to 15 minutes) - 110000 Watt (110kW / 140kVA) Rated power 230V - 33000 watts 230V maximum power (up to 15 minutes) - 36600 Watt Rated current (400V) - 435.0 A Current protection - C16, C32, main - 200A Frequency - 50 Hz Generator construction - Synchronous ⊳ ENCLOSURE: Silenced enclosure Precipitation resistant housing Three-phase and single-phase sockets Fuel tank capacity - 180 liters Operating time on full tank (Average) - 20 hours Transport kit - Holes for forks and HDS transport hooks Dimensions 110 x 275 x 145 cm Gross weight - 1830 kg ⊳ FEATURES: Voltage stabilizer (AVR) - Stamford SX460 (2%) - Electronic voltage stabilization with variable load - electronic frequency stabilization Automatic operation of the genset SZR (Self-actuated reserve switching) Thermal overload protection Sensor for oil pressure, oil level, coolant level Glow plugs Oil sump heating Heating of the cooling liquid Battery - 2 pieces 120Ah Automatic charger ⊳ CONTROLLER: Controller model - Comap InteliLite 4 AMF 20 Kedpfx Aastpnm Ujlsww Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection CAN module extensions Integration with SCADA system Additional outputs - for 4G, Ethernet, RS232/485 connections GPRS remote control and monitoring - Optional Modbus, Ethernet communication - Optional Why us? We are a company specializing exclusively in generators, for more than 17 years we have been operating in this industry constantly striving to make sure that our products represent the highest quality and are as reliable as possible. During this time we have provided solutions to more than 10,000 customers in Poland even in its remotest corners. Suppliers of components of our units are selected meticulously, we make sure that they are leaders in their industries. We have a wide range of gensets from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: good (used), Injection molding machine Engel Victory 310-60 Electric CC200 Year of manufacture: 2006 Clamping unit type: Fully hydraulic Clamping type: Columnless Clamping force: 600 kN Plate dimensions (table dimensions): 720 mm Distance between columns: 450 mm Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Moving plate centering (D): 125 mm Ksdpfx Aerg Hh Nealsww Fixed plate centering (D): 4,70 m Threaded holes on plates: 5700 kg Maximum mold weight: 1,40 m Dimensions (W x H): 2,70 m Machine weight: 5700 KG Heating channels: 9 Nozzle clamping force: 160 mm Nozzle stroke: 360 1/min Pump drive power: 13 kW Heating capacity: 9 kW Standard voltage: 400 V 50 Hz Oil capacity: 185 l Auger diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2400 bar Screw pitch: 24 mm Screw speed: 155 cm³/sec. Plasticization capacity: 40.6 Air injection speed: 290 Additional equipment: Monitor text in German CEE 16A plug socket CEE 16A plug socket Hydraulic core 2x Air fan 1x Water-cooled machine battery Machine without material tank Leveling elements Standard interface/Euromap 12 Schuko 10A plug socket Schuko 10A plug socket

Condition: new, Year of construction: 2025, 0460 mm 270 mm 1500 mm 230 mm 76 mm Kwjdswrma Uopfx Aalow 11 kW

Condition: good (used), Year of construction: 2006, Vertical Machining Center Machine type: DMG DMC 635 V Control: Heidenhain iTNC 530 Year of manufacture: 2006 TECHNICAL DATA: Kwjdpfx Aewzanwoaljw Travel distances: X-axis: 635 mm Y-axis: 460 mm Z-axis: 510 mm Rapid traverse (X/Y/Z): 30 / 30 / 30 m/min Speed range: 20 - 10,000 rpm Spindle motor: 9 / 13 kW Tool holder: SK 40 Tool changer Tool positions: 20 Table size: 790 x 560 mm Max. table load: 600 kg Features: Chip conveyor Electronic handwheel Chip wash gun Operating mode: 4

Condition: excellent (used), Year of construction: 1998, Angel ES 330/80 HLS Closing 80 tons Year 1998 Scrow 35 mm Stroke volume 154 cm3 Enlarged clamping plate 660x560 Mould height min 200 mm Kwsdpjpdr Aisfx Aalsw

Condition: excellent (used), Year of construction: 2016, operating hours: 23,170 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection pressure: 2,005 bar, injection weight: 618 g, mold height (min.): 330 mm, Injection molding machine Krauss Maffei 250-1400CX with robot and gas boost (225) Product Code: 225 Availability: In Stock Year of production: 2016 Brand: KRAUSS MAFFEI Technical data Shot Weight: 618 g Injection speed: 848 ccm/s Clamping Force: 2,500 kN Screw dia: 60 mm Injection pressure: 2005 bar Tie bar distance: 630x630 mm Platen size: 1135x1180 mm Mould height min.: 330 mm Total day-light max: 1150 mm Type of controls: MC6 Language: German Power: 70 kW Workinghours: 23170 h Weight: 15000 kg Dimensions: 6,5x2,3x2,3 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes Kodpfjvtzkfox Aaleww Heating channels: Yes Gas bottle: Yes Picker or robot: Yes

Condition: new, Year of construction: 2021, functionality: fully functional, Edgebanding machine Hebrock K36 featuring PLC control, a maintenance-free and coated quick-heating glue pot, including pre-setup for rapid glue pot changeover. - 10" touchscreen interface - Maximum edge thickness: 3 mm - Minimum workpiece length: 200 mm - Minimum workpiece width: 80 mm - Feed speed: 10 m/min - Ready for operation in approx. 5 min - Maximum power consumption: 14 kW - Electrical requirements: 400V / 3-phase / 50 Hz - Machine dimensions (LxWxH): 5250 x 1230 x 1430 mm - Approximate weight: 1700 kg Additional Equipment/Options: • Whispercut pre-milling cutter, 60 mm workpiece height • Heatable infeed fence • Radius unit for corner rounding, R = 2 mm • Quick-change device for corner rounding motor • Multi-radius scraper (R2/R1) • Corner rounding for 60 mm workpiece height • Release agent spray unit • Cleaning agent spray unit • Edge protection spray system • Nesting package • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Interior LED lighting Kedpfxowyu E Us Aalsww • Equipment for short parts processing • Preparation for return system (barbaric) • Axis package: motorized adjustment of height, edging, and pre-milling units • Additional workpiece infeed and outfeed supports (each 450 mm)