Injection molding machine up to 5000 KN

KraussMaffei 2300/12000/MC

Condition: excellent (used), Year of construction: 2004, Krauss Maffei KM 2300 - 12000 MC injection molding machine Year: 2004 Control type: MC 4 Number of operating hours 93 900 Closing unit Clamping force: 23000 kN Mould opening force, max.: 1420 kN Moving platen feed force Opening: 227 kN Moving platen feed force Closing: 203 kN Mould platen size (h x v): 2830 mm x 2400 mm Distance between columns (h x v): 2000 mm x 1600 mm Mould opening stroke: 2600 mm Min. mould height: 1100 mm Maximum mould height: 1800 mm Maximum daylight: 3700 mm Hydraulic ejector - stroke: 350 mm Ejector force forward/backward: 415/115 kN Injection unit Screw diameter: 135 mm Ls/D ratio: 23 Injection pressure: 1389 bar Redpfxswq Ed Ao Aa Eel Sweep volume: 8588 ccm Shot weight, PS: 7815 g Injection rate: 1019 ccm/s Screw speed: 113 1/min Maximum plasticization rate: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Nominal pump motor capacity: 132 kW Installed heating power: 997kW Adjustable barrel heating zones: 7 Number of drying cycles: 350 1/h Tank capacity: 2500 ltr. Dimensions and weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total machine weight: 143,000 kg Maximum mold weight: 62,000 kg LRX 1000 robot X-axis - 2,000 mm Y-axis - 3,000 mm Z-axis - 5,000 mm

Condition: used, machine/vehicle number: 12599, Rotor diameter: 600 mm Rotor width: 1450 mm 12-knife rotor 3 rows stator knives Rjdpfxsk N Iy No Aa Eol Inlet cross section approx. 780 x 1490 mm Drive motor: 132 kW

Condition: good (used), Year of construction: 1982, functionality: fully functional, type of input current: three-phase, MCS Jigger High Temperature 144ºC. Type COMBY-JIGGER JP70. Year 1982. It underwent a complete renovation in 2002 Pressure: 3kg/cm2 Capacity: 9170 l Roller width 2,000 mm. Rjdpefqmx Tofx Aa Ejl Diameter of fabric 1100 mm. Diameter of rollers 324 mm. Additives tank.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Redpfxsd Spf Rj Aa Esl Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: used, Year of construction: 1988, x-travel 0600 mm y-travel 450 mm Rsdpfx Aeu Rt I Iea Ejl z-travel 450 mm quill stroke 80 mm table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min spindle taper SK 40 feeds - automatic programming 1 - 4000 mm/min rapid traverse 6 m/min control Philips 432 power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, diverse accessories.

Condition: excellent (used), Year of construction: 2007, 1,0 St. gebr. Spritzgießmaschine Rsdpfju Eu Tnsx Aa Esl Hersteller: ENGEL Typ: VICTORY 200/28 TECH Baujahr: 2007 Schließkraft: 28 Tonnen Holmabstand: HOLMLOS Schnecken DN: 25 mm Max. Hubvolumen: 49 ccm³ Spritzteilgewicht 44 g/PS Steuerung: CC200 Ausstattung: - 1 x Kernzug

Condition: used, Year of construction: 2005, Technical details: screw size: 90 mm injection shot weight in Polysterol: 1.758 g/PS closing pressure: 6500 kN weight of the machine ca.: 32 t Out of serial production Rsdpotunccjfx Aa Ejl *

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Rodpfx Aen D Ew Iea Eel Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: used, Year of construction: 2008, clamping force: 160 kN, displacement volume: 251 cm³, injection pressure: 2,500 bar, overall weight: 8,200 kg, load hours: 37,200 h, screw conveyor diameter: 40 mm, terms of delivery: FCA Pegnitz delivery time: on request Rjdowd Udlspfx Aa Ejl terms of payment: 100% prior to delivery

Year of construction: 2024, operating hours: 10 h, condition: like new (used), Extrusion Line with Densifier – Ideal for Recycling Applications This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Key Features: • Suitable for all types of polyolefins • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials. Rodpfjtziudex Aa Eel