Krauss Maffei 1600-17200MC

KraussMaffei 1600-17200MC

Condition: used, Year of construction: 2021, Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line.  Technical details - Capacity: 9000 containers/h (varies according to bottle volume and product).  - Container  - Max. Diameter: 100mm  - Max. Height: 300mm  - Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  - Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted - Positronic control system for optimal adaptation to downstream filler - Machine, completely internally wired with attached control cabinet in mild steel, painted - Machine according to CE guidelines; i.e. max. noise level of ≤ 80 dB +/- 2 Combined filling and closing machine (block machine) | ALWID | SUPERIOR-16MDM-5SK - Fully automatic rotary filler - Filling system: mass flowmeter system, type: Endress+Hauser LPG MASS - Number of filling stations: 16 filling stations - Filling valve diameter: Ø12mm - Max. tank dimensions: height: 50-300 mm, Ø: 20-100 mm - Fully automatic round capper - Number of capping heads: 5 - With torque adjustment via slip clutches - With fully automatic cap sorting and cap feeding via BONINO disc sorter with elevator Lhodpfomfqm Dox Apmji - With inside drop switch to switch off the machine in case of missing closures Checkweigher | ALWID | OCS-HC-M-2000-1 - Applied safety and machinery directives CE compliant - Industrial load cell with stainless steel housing based on the principle of electromagnetic force compensation - Force shunt free current transfer at the load cell - Front protection to reduce interference on the weighing result - Stainless steel control cabinet - Graphics-capable color TFT touch screen, 10.4 inch, VGA resolution - Flexible operability due to tiltable stainless steel operator terminal - Freely configurable user interface with simple, intuitive operation Inkjet Printer | Domino | Ax350i  - Fast printing of text and multi-line codes at high speeds  Labeler | ALWID | SES-120-III - Tandem design - Max. Label height: 120mm  - Photocell for label scanning - 2 x automatic winding station incl. counter pressure plate - Mounting device with height adjustment for lateral label dispensers - With adjustable side guides - passage width up to 150mm

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Lodpfx Apjtrya Romehi Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Condition: used, Year of construction: 2000, machine/vehicle number: SO117, Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bphMain Technical Features and Premium UpgradesThis HDPE Blow Molding Machine offers a highly specialized system for blow molding containers made of high-density polyethylene (HDPE). Specifically, this is a TECHNE 4000 T660 manufactured in 2000, which is preserved in an OPTIMAL state of cleanliness and order. Reflecting its meticulous maintenance history, the machine was cleaned daily in the lower section, and completely blown and cleaned once a week, starting from the extruder down to the bottom.In December 2023, the system received a brand-new retrofit consisting of a latest-generation Gefran PLC equipped with a color touch screen, fully customizable functions, and complete machine control via HMI. This upgrade also features a Gefran GFC modem for remote assistance.The machine operates with a 4+4 cavity double head configuration with a 150 mm cavity spacing, handling bottle formats up to 2 liters and producing up to 2700 bottles per hour (bph). This design optimizes production with a symmetrical and highly efficient layout. Furthermore, the system is equipped with proportional hydraulics for movements utilizing Rexroth hydraulics, along with independent control of 8 parisons. It features 8 parisons with independent profiles managed by Moog servovalves, offering precise parison control up to 400 points.The production line comes exceptionally well-equipped with peripheral machinery, including a complete plastic loader kit with a Moretto mixer, a Tria granulator (2022), and a Villani double leak tester (comprising 2 independent leak testers). Additionally, an extensive complete replacement kit is included. These spare parts encompass:All Rexroth proportional movement valves (carriage, nozzles, and molds)All linear transducersCarriage translation columns complete with a full set of bushingsClosing lever equipped with bushings and pinsA Voith hydraulic pumpAll ATOS hydraulic cylindersA brand-new direct current (DC) extrusion motorA brand-new direct current (DC) inverterVarious mechanical parts, heating elements, nozzles, cores, and diesYou can access this machine starting mid-October.Mold Configuration and FlexibilityTo ensure high precision in shaping bottles, the blow molding system provides a cavity spacing of 150 mm. Additionally, the machine includes a double carriage with a 660 mm carriage stroke, which allows you to control the production cycle optimally and minimizes downtime. In particular, this Blow Molding Machine accommodates containers up to 2 liters, giving you significant flexibility in producing various types of packaging. The system supports both straight or inclined blowing (up to 30 degrees), adapting easily to different container geometries.The extrusion system features a 100 mm / 25 L/D extruder equipped with a vertical filter. Although the machine does not include molds in its standard supply, it supports a wide range of mold sizes, up to a maximum capacity of 2 liters. Furthermore, you can easily adapt the entire system to meet specif... Lhodpsvgvkasfx Apmji

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s Lhjdow U N Ixjpfx Apmji - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: good (used), Year of construction: 2013, clamping force: 16,000 kN, Equipment: documentation/manual, Clamping force: 1600 t Lhedpfsyh I Emsx Apmji Screw diameter: 135 mm Distance between tie bars V: 1420 mm Distance between tie bars H: 1870 mm Shot volume: 9662 cm3 Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: X82600, clamping force: 12,000 kN, screw diameter: 150 mm, clearance between the columns: 1,200 mm, displacement volume: 12,193 cm³, injection pressure: 1,500 bar, injection weight: 11,584 g, opening stroke: 1,400 mm, Used Stork IMM 12000-19000 injection molding machine. Lhedpfx Aewhkfyjpmoi

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 88 kW (119.65 HP), type of input current: three-phase, type of cooling: water, overall weight: 1,700 kg, input voltage: 400 V, total width: 1,300 mm, total length: 2,000 mm, total height: 2,000 mm, warranty duration: 6 months, Watercooled chiller EF COOLING EVO 90 WKL770FC 88 kW Cooling capacity: 88 kW / 25.02 tons (12/7 — 35°C) Year of manufacture: 2019 Options: Hydraulic module. Freecooling (Dry cooler is additionally required) Refrigerant circuit: 2 pcs. Heat exchanger: Plate Compressors: 4 pcs. Copeland ZR125KCE-TFD-455 (scroll) Type of refrigerant: R407c Hydraulic module: 2 pcs. Grundfoss CM 10-5 + 1 pcs. Grundfoss CR20-2 + 1 pcs. Grundfoss CM15-1, expansion vessel, buffer tank 500 l. Dimensions: 2x1.3x2 m. Weight: 1700 kg. Working hours: 10432/10428/1333/1532 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; Ledpfx Aowlnwuopmehi - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Lhsdpfx Apjub S R Homei Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Year of construction: 1986, condition: ready for operation (used), Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed. Ledpfspvkzyex Apmehi

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Lsdpjy Hmfyefx Apmohi Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.