PET filling line for nonreturnable bottles

KHS

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Lhjdpfszzz Ivjx Aklel Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: good (used), Year of construction: 2000, Connection value: 430kW Dimension: Total length: 10750mm Lsdjip T T Hjpfx Akljhl Width: 3400mm Height: 3900mm

Condition: used, Year of construction: 2018, operating hours: 3,500 h, machine/vehicle number: LC636, Used filling KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Container type: Aluminum cansDocumentation: Hard‑copy manuals includedAdvanced Automation & Control SystemsThe line is equipped with dedicated control cabinets for conveyors and labeling, supporting coordinated start/stop logic and smooth product handling. The KHS Innofill Can C filler block provides modern automation architecture with line-friendly integration, recipe handling, and synchronized drives for consistent filling and seaming operations. Safety interlocks and guarding are present across key stations for operator protection and process reliability.Production Line Integration CapabilitiesThis packaging line offers end-to-end integration from depalletizing to case packing, enabling seamless flow of cans through rinsing, filling, seaming, inspection, drying, labeling, and secondary packaging. Modular conveyors by KHS, AE Conveyors, and KBR facilitate balanced accumulation and stable transfer, helping maintain throughput at rated speeds. The configuration is suitable for a wide range of beverage production scenarios and can be adapted to different aluminum can sizes with appropriate change parts and guides.Machine Condition & Maintenance HistoryAs a second hand used bottling line, the core process equipment includes 2018-generation KHS Innofill Can C filler and Ferrum FC03 seamer. The asset list indicates a complete, coherent set of stations with hard‑copy manuals available, supporting efficient commissioning, maintenance, and spare parts management. The line is presented in working condition and ready for operation, subject to standard site preparation and utilities.Operational Performance & VersatilityDesigned for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automated infeed, an air rinser for internal container preparation, precise isometric filling via KHS Innofill Can C, and robust double seaming with the Ferrum FC03. Quality assurance is enhanced by a Heuft fill level detector. Downstream, an Air Control Industries dryer pre... Lhjdpey Szbysfx Aklel

Condition: excellent (used), Year of construction: 2015, KHS INNOFILL DVD 40 CAN FILLING LINE MAX SPEED: 34,000 CPH 330ML IN 24 PACK WRAPAROUND CARTON CURRENT SPEED: 24,000- 28,000 CPH IN SMALL WRAPAROUND CARTON 4/6/8/10/12 PACKS LOCATION: UK STANDARD CAN 330ML & 440ML LID 202 SLEEK CHANGEPARTS FOR FILLING BLOC AVAILABLE GPI PACKER ADDED IN 2018 Lhsdpfetraaaox Akljl ROBOPAC PACKER ADDED IN 2022 EQUIPMENT LIST: FIPAL MINIDEPAL 20 LA DEPALLETISER • TWIN LANE RINSER • KHS INNOFILL CAN DVD 40 FILLING BLOC 34,000 CPH • FERRUM F6 6 HEAD SEAMER • CSW DEVENTER LID FEED SYSTEM • HEUFT SPECTRUM TX • EURO SISTEMI CAN DRYERS • TELEDYNE TAPTONE INSPECTION • ROBOPAC PRASMATIC TC400 COMPACT CASE PACKER • FT SYSTEM CP600 TP TUR300 Z200 RAS001 • GPI QUICKFLEX 300 MULTI-PACKER • HITACHI INK JET PRINTER • PACKITAL LANER • COMPLETE CONVEYOR SYSTEM • FIPAL PAL 80 F PALLETISER • ATLANTA STRETCH REVOLUTION LS STRETCH WRAPPER LOCATION: UK VIEWINGS BY APPOINTMENT WELCOME. PLEASE GET IN TOUCH TO ARRANGE AN INSPECTION. INDASSOL.COM

Condition: used, Year of construction: 2010, operating hours: 47,000 h, machine/vehicle number: LC582, Used Complete Krones PET Bottling Line – 22,000 BPH – OverviewUsed Complete Krones PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET.Technical Specifications & Performance DataManufacturer: Krones and GEAYear of manufacture: 2010Working hours: approx. 47,000Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 L)Products handled: cider, sparkling water, still water, juices with CO2Filling technology: Ultra-clean, isobaric, volumetric PET fillingCurrent product: Apple juice with water and CO2Neck finishes: PCO 1810, PSO 28 mm, 1810/1881 short neckControls: Siemens Simatic S7 PLC platformMain Equipment ScopeCIP: Krones VarioClean F AUT fully automatic CIP system, 4 x 5000 L, 30 m³/hProcess: GEA TDS plant with flash pasteurizer, mixer, carbonator, degasser and process tanksPreforms: Preform tipper/kipper and feeding conveyors; Krones Contifeed RS preform feeding system; Prejet Linear preform cleaning unitCaps: Cassner cap feeding with cap rinsing and sterilizationBlow molder: Krones Contiform S12M, directly connected to the ultra-clean bloc (no air conveyor)Filler/Capper bloc: Krones Volumetric VODM-PET 2.160-66-103 with integrated capper; Krones Vario Dos filler-bloc cleaningCoding and inspection: Domino DDC 3 laser coder; Krones Checkmat 731 FM-X+L filling level inspector; Krones Checkmat 731 EM label inspectorConveying and testing: SYNCO bottle conveyors; Krones Flowliner bottle leak testerLabeller: Krones Contiroll OPP 720-15, double roll-feed wrap-around labels with hot glueSecondary packaging: Krones VarioPro FS shrink–tray packer; Krones Multico S packet conveyors; Twin Pack handle applicatorPack coding: Leisinger Jet 3 ink coderPalletizing: Krones Robopox Modulpal (2016)Advanced Automation & Control Systems Line Control & PLCSiemens Simatic S7-series PLC for coordinated line control, interlocks and diagnosticsIntegrated filler-bloc cleaning via Krones Vario Dos for validated ultra-clean cyclesRecipe and parameter management supporting fast changeovers between PET formats Ljdpfx Aeyhbmteklehl

Condition: excellent (used), 2 x KHS / GEA High Speed Keg Filling Lines Capacity: 1,000 kph Sizes: 15L, 20L, 30L, 50L 60L Lhjdsxcinmepfx Aklel Keg Palletiser System also available. Location: Dublin Please contact Indassol for further details & pricing.

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned Lhodpjzlqu Tefx Aklol - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: ready for operation (used), The crown caps are manually fed into the dispensing chute, the machine places the crown cap onto the bottle, and presses it into place. Lhodpfx Akefh Dlrelol

Condition: used, Year of construction: 1992, Overview This O+H / KHS Hansacan can filler, blocked with a Ferrum can seamer, is a rotary can filling and seaming monoblock for beverage cans. Filler and seamer are joined as a single unit, so cans run from filling straight through to seaming in one continuous flow. The block is set up for standard 330 ml cans (can type 211 / 202) and reaches a rated output of approximately 20,000 cans per hour, depending on product and filling temperature. The block was previously in production in a commercial brewery filling 330 ml cans and is currently at the workshop undergoing a complete reconditioning before delivery. Filling parameters and production data are managed via a Siemens SIMATIC touch HMI, with machine control on a Siemens S7 PLC. Technical data - Manufacturer: O+H / KHS - Model: Hansacan can filler - Seamer: Ferrum can seamer, F 505 G - Year of manufacture: filler 1992, seamer 2010 - Machine type: rotary can filler and seamer monoblock - Filling valves: approx. 30 (type Hansacan) - Seaming heads: 5 - Capacity: approx. 20,000 cph at 0.33 L (product- and temperature-dependent) - Can format: 330 ml standard cans, can type 211 / 202 - Products: beer, carbonated beverages - Control: Siemens S7 PLC with Siemens SIMATIC touch HMI Equipment - Filler and seamer supplied as one blocked unit - New electrical panel with Siemens S7 PLC and SIMATIC touch HMI (reconditioning scope) - New pneumatic panel with renewed pneumatic valves (reconditioning scope) - Beer regulating valve ahead of the beer inlet, CIP tulips and CO₂ injection before seaming - Set up for can type 211 / 202, 330 ml - Manuals, spare-part list and electrical documentation for filler and seamer (provided with the machine) - CE declaration to be issued on completion of reconditioning Condition Used - currently undergoing a complete reconditioning at the workshop and to be delivered fully overhauled, supplied as a blocked filler and seamer unit. The reconditioning scope and the CE declaration are committed as part of the sale and are not yet complete. The block was previously in production in a commercial brewery filling 330 ml cans. Availability Ledpozlqu Hofx Aklohl On request, after completion of the reconditioning. Location and firm delivery date on request.

Condition: used, Year of construction: 1992, Overview This carbonator was manufactured in 1992 by Germany KHS. The KHS CX 30 is designed for the production of carbonated mineral water. The unit was upgraded by KHS in 2014 and has a capacity of up to 30,000 litres per hour. The machine was in production until March 2025, was dismantled in December 2025, and is currently stored in a warehouse in Bippen. The machine is available immediately. Technical data - Capacity: 30,000 litres/hour - Application: Carbonated mineral water - Configuration: Carbonator with pumps, tank, and accessories Lhsdpfjzavp Hsx Aklel - CO₂ rate: max. 8 g/litre - Drive: Siemens S7 Scope of Delivery - Carbonator | KHS | CX 30 | 1992 (upgraded 2014) | Complete system - Pump system  - Tank | KHS  - Control system | Siemens | S7 

Condition: reconditioned (used), Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control panel was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Ljdpfexpi Dusx Aklehl Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: used, Year of construction: 2018, Overview This compact automated can filling line was manufactured with main equipment from KHS, Ferrum, Ska Fabricating and Atlanta. The line is designed for beverage can production and includes depalletizing, can transport, ionized air rinsing, filling, seaming and downstream film / shrink packaging. The core of the line consists of a KHS Innofill Can C filling system combined with a Ferrum FC03 can seamer. The system is integrated with overhead and floor-mounted can conveyors and is arranged in a compact production layout. Technical Data - Manufacturer / main equipment: KHS / Ferrum / Ska Fabricating / Atlanta - Line type: Automated can filling line - capacity: 15.000/h - Number of filling valves: 21 - Number of seaming heads: 3 - Container type: 330ml, 440ml, 500ml standard can - Packaging type: loose cans into 12 & 24 trays and WA boxes - Year: 2018 - Operating hours: 3,446 h - Layout: compact canning line layout with overhead and floor-mounted conveyor sections Scope of Delivery - Can Depalletizer | Ska Fabricating Co. | – | Enclosed depalletizing system with safety guarding | 2018 - Can Conveyor System | KHS / AE | – | Overhead and floor-mounted conveyor network for empty cans and line transfer | 2018 - Ionized Air Rinser | Ska Fabricating Co. | AV-C500 | Empty can rinsing / cleaning module before filling | 2018 - Can Filler | KHS | Innofill Can C | Automated can filling system | 2018 - Fill level detection | Heuft | - - Can Seamer | Ferrum | FC03 | Rotary can seaming unit | 2018 - Can dryer | Air control industries | 2018 - Labeller | Pack Leader Advanced Dynamics | Pro-516 | Labelling machine incl. roller feed | 2018 - Case Packer | Atlanta | Rafaello 726 | packaging system | 2018 - Case Packer Printer | SATO | S86-EX | 2018 Lhjdpfey Tt H Dsx Aklel

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  - Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) - Formats: 250 ml – 1000 ml - Application: Hot-fill and cold-fill beverage production - Container types: Glass bottles and PET bottles (hot-fill) - Filling temperature: 10°C – 104°C - CO₂ capability: Yes - Closures: - Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off - PET: 38 mm 3-start hot-fill closure Ledpfxoyx I Awo Aklshl - Labelling: Cold glue paper labels (optional sleeve labelling available) - Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  - Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine - Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system - Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 - Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding - Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones - Bottle dryer | Europool | - | 2007 | High-speed air dryer - Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 - Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt - Conveyors | KHS / Krones | - | - | Complete conveying system - Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial - Pallet labeller | Logopack | - | - | Pallet labelling system - Reverse osmosis system | MWT | - | - | Capacity 800 l/h

Year of construction: 1991, condition: ready for operation (used), The filling line includes (1) Empty Glass Lifter Kettner Presant Super, year of construction: 1990 (2) Rinser Krones Gripstar, year of construction: 1991 (3) Filler Krones FKVCF 110, year of construction: 1991 (4) Natural Corker Bertolaso Delta 416S, year of construction: 1991 (5) Cork Conveyor (6) Wiring Machine Kematec Dratomat 20, year of construction: 1991 (7) Depalletiser Schneider EPA 211, year of construction: 1991 (8) Depalletiser Schneider EPA 505, year of construction: 1991 (9) Capsule Machine Robino Zenith 2-32 Otticoo, year of construction: 1991 (10) Labeller Krones Solomatik 20-8-4, year of construction: 1982 (11) Case Packer Kettner Robot BE3/CT, year of construction: 1990 (12) Paternoster for case transport (13) 2x Case Erector Kettner KAF 2400 F, year of construction: 1996 (14) Capper Kettner HD 2500, year of construction: 1990 (15) Pallet Loader Kettner Pressant Universal, year of construction: 1990 (16) Binder Born HB R 240/430, year of construction: 1990 (17) Pallet Roller Conveyor (18) Roller Conveyor, output: 18,000 bottles/h, with documentation, suitable for champagne botttles, the line has not been used for 10 years. Ledpek Nm Nrofx Aklohl

Condition: used, Year of construction: 2005, Overview  The palletizer was manufactured by the German company KHS in 2005 and was until recently part of a bottling line in German dairy company. The palletizer is now being released as the owner is sgutting down the production. Technical details/ scope Lhjdpfxexb Ar Aj Aklol - Worked with tray/cartons of 8 units (4x2) - Pallet loader - With shutter head - Incl. protective fences, pallet transport, tray transport, tray turner, formation table, empty pallet magazine