Bottle Packer

Kettner Blitzpac E35 T1

Condition: ready for operation (used), The crown corks are fed manually into the chute, the machine places the crown cork on the bottle and presses it on. Gbsdpfx Aefh Dlrsfken

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Gbedel Hx Adspfx Afkjn

Condition: used, Bottle filler, make BKM, type: Varifill 40/10K/10PP-100, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRWbottles, direction: left->right. Gjdpjrxuwksfx Afkjbn

Condition: used, Year of construction: 2017, Overview  This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time.    Technical Details    Capacity  28,800 bottles per hour   1,200 crates per hour   Recently processed parameters  Bottle dimensions  500ml   Outer diameter: 65,50mm   Total height: 206,30mm  Crates  Formation 6x4   Length crate: 400mm   Width crate: 300mm   Height: 255mm  Box inlet direction: transverse  Electrcial connection: 400/ 230V, 50Hz, 15 A  Gedpfet Rbznjx Afkjbn

Condition: used, Year of construction: 2007, Overview This wrap-around cardboard packer was built in 2007 by Italian manufacturer Ocme. The machine was installed in a non-returnable glass bottling line. The whole line was dismantled and sold as single machines. The WA packer is properly dismantled and stored. Techn. Details Capacity: up to 60 packs per minute Recently packed: 3x4 cardboard 4x6 cardboard 0,5 L glass bottles 0,33 L glass bottles Other formats possible Gbjdpfx Afstq Dzhokjn

Condition: used, Year of construction: 2015, Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details Leistung: bis zu 50.000 bph Bauart Rotierend Arbeitsrichtung gegen den Uhrzeigersinn (r-l) Modulare Maschine Höhe des Förderbandes: 1150 mm Etikettentyp: Kaltleim Position des Etiketts Brust/Hals Stanniol Körper Rücken Siegel Flaschenformate 0,25l Vichy-Flasche 0,5l GDB 0,7l GDB 0,75l Gastro-Flasche Anzahl der Aggregate: 3 Teilkreisdurchmesser: 1800 mm Anzahl der Flaschenteller: 45 Teilungsdurchmesser: 125,6 mm Ausrichtung der Flaschenteller über Danfoss-Servoantriebe Erkennung von beschädigten oder umgefallenen Flaschen am Einlauf Stoppstern am Einlauf Leimwalzen aus Stahl Vorbereitet für Flaschenausrichtung durch Kameraerkennung Heissleimwerk für Siegeletikett von Robatech Heissleimdüse an der Etikettierstation montiert Siemens S7 Technische Dokumentation vorhanden Lieferumfang Datumscodierer Leimpumpen Unipump H (heizungsgesteuert) Gbedpfx Afov I Tnxokjn

Condition: ready for operation (used), Year of construction: 1996, Two identical insulated double-jacket cooling tanks Möschle are available. Vessel volume: 15500l, jacket volume: 60l, max. jacket pressure: 3bar, max. medium temperature: 50°C, min. medium temperature vessel/jacket: 18°C/10°C, diameter: 2650mm, overall height: 4800mm. Including permanently installed agitators. An on-site inspection is possible. Godjx Syw Hepfx Afkjbn

Condition: used, Standing stainless steel tank: Nozzles and connections: In the bottom: 1 x DN 50 outlet nozzle, extended to the front 1 x DN 25 threaded nozzle In the top: 2 x DN 25 threaded nozzles On the shell: Gedexxkkhjpfx Afksbn 1 x oval manway with swing bolt 1 x nameplate 1 x threaded nozzle Nominal capacity: approx. 6,000 l Internal diameter: 1,800 mm Cylindrical height: approx. 1,750 mm Total height: approx. 2,885 mm with 680 mm ground clearance Perm. operating overpressure: 3 bar Perm. operating temperature: 20 °C Material: Stainless steel V2A (1.4301) Bottom thickness: 4 mm Top thickness: 4 mm Shell thickness: 3 mm Tank standing on three heavy-duty legs Otherwise as per images

Condition: used, Year of construction: 2014, Industrial robot Manufacturer: Kuka Type: KR210 R3100 ultra Year of manufacture: 2014 Reach: 3,196 mm Gsdoxp Nuyspfx Afksbn Weight: 1,154 kg Payload: 210 kg Kuka KRC4 controller Year of manufacture: 2014 Weight: 163 kg Software: KSS 8.5.4 Kuka TouchPad KCP4 Kuka connecting cables ä3626

Condition: used, Year of construction: 2005, Overview The swing-top closing machine was manufactured by the Austrian manufacturer AMS in 2005. As the current owner has decided not to use swing-top closures anymore, this machine is for sale. Currently the machine is still installed in a brewery. Documentation is available. Tech Specs: Capacity: 12,000 bph Control: Siemens S7 Formats: 0,3 l 0,5 l Number of closing positions: 16 Documentation available Gedpfx Ael Hxmpsfksbn